+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Sunxi usb-phy code
- *
- * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
- * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- */
-
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb_phy.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <errno.h>
-
-#if defined(CONFIG_MACH_SUN4I) || \
- defined(CONFIG_MACH_SUN5I) || \
- defined(CONFIG_MACH_SUN6I) || \
- defined(CONFIG_MACH_SUN7I) || \
- defined(CONFIG_MACH_SUN8I_A23) || \
- defined(CONFIG_MACH_SUN9I)
-#define SUNXI_USB_CSR 0x404
-#else
-#define SUNXI_USB_CSR 0x410
-#endif
-
-#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
-#define SUNXI_USB_PASSBY_EN 1
-
-#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
-#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
-#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
-#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
-
-#define REG_PHY_UNK_H3 0x420
-#define REG_PMU_UNK_H3 0x810
-
-/* A83T specific control bits for PHY0 */
-#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5)
-#define SUNXI_PHY_CTL_SIDDQ BIT(3)
-
-/* A83T HSIC specific bits */
-#define SUNXI_EHCI_HS_FORCE BIT(20)
-#define SUNXI_EHCI_CONNECT_DET BIT(17)
-#define SUNXI_EHCI_CONNECT_INT BIT(16)
-#define SUNXI_EHCI_HSIC BIT(1)
-
-static struct sunxi_usb_phy {
- int usb_rst_mask;
- int gpio_vbus;
- int gpio_vbus_det;
- int gpio_id_det;
- int id;
- int init_count;
- int power_on_count;
- ulong base;
-} sunxi_usb_phy[] = {
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
- .id = 0,
- .base = SUNXI_USB0_BASE,
- },
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
- .id = 1,
- .base = SUNXI_USB1_BASE,
- },
-#if CONFIG_SUNXI_USB_PHYS >= 3
- {
-#ifdef CONFIG_MACH_SUN8I_A83T
- .usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
- CCM_USB_CTRL_12M_CLK,
-#else
- .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
-#endif
- .id = 2,
- .base = SUNXI_USB2_BASE,
- },
-#endif
-#if CONFIG_SUNXI_USB_PHYS >= 4
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK,
- .id = 3,
- .base = SUNXI_USB3_BASE,
- }
-#endif
-};
-
-static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY;
-
-static int get_vbus_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
- case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
- }
- return -EINVAL;
-}
-
-static int get_vbus_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
- }
- return -EINVAL;
-}
-
-static int get_id_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
- }
- return -EINVAL;
-}
-
-__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
- int data, int len)
-{
- int j = 0, usbc_bit = 0;
- void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
-
-#ifdef CONFIG_MACH_SUN8I_A33
- /* CSR needs to be explicitly initialized to 0 on A33 */
- writel(0, dest);
-#endif
-
- usbc_bit = 1 << (phy->id * 2);
- for (j = 0; j < len; j++) {
- /* set the bit address to be written */
- clrbits_le32(dest, 0xff << 8);
- setbits_le32(dest, (addr + j) << 8);
-
- clrbits_le32(dest, usbc_bit);
- /* set data bit */
- if (data & 0x1)
- setbits_le32(dest, 1 << 7);
- else
- clrbits_le32(dest, 1 << 7);
-
- setbits_le32(dest, usbc_bit);
-
- clrbits_le32(dest, usbc_bit);
-
- data >>= 1;
- }
-}
-
-#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
-#if defined CONFIG_MACH_SUNXI_H3_H5
- if (phy->id == 0)
- clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
-#endif
- clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
-}
-#elif defined CONFIG_MACH_SUN8I_A83T
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
-}
-#else
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
- /* The following comments are machine
- * translated from Chinese, you have been warned!
- */
-
- /* Regulation 45 ohms */
- if (phy->id == 0)
- usb_phy_write(phy, 0x0c, 0x01, 1);
-
- /* adjust PHY's magnitude and rate */
- usb_phy_write(phy, 0x20, 0x14, 5);
-
- /* threshold adjustment disconnect */
-#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I
- usb_phy_write(phy, 0x2a, 2, 2);
-#else
- usb_phy_write(phy, 0x2a, 3, 2);
-#endif
-
- return;
-}
-#endif
-
-static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
-{
- unsigned long bits = 0;
- void *addr;
-
- addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE;
-
- bits = SUNXI_EHCI_AHB_ICHR8_EN |
- SUNXI_EHCI_AHB_INCR4_BURST_EN |
- SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
- SUNXI_EHCI_ULPI_BYPASS_EN;
-
-#ifdef CONFIG_MACH_SUN8I_A83T
- if (phy->id == 2)
- bits |= SUNXI_EHCI_HS_FORCE |
- SUNXI_EHCI_CONNECT_INT |
- SUNXI_EHCI_HSIC;
-#endif
-
- if (enable)
- setbits_le32(addr, bits);
- else
- clrbits_le32(addr, bits);
-
- return;
-}
-
-void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
-{
-#ifndef CONFIG_MACH_SUN8I_A83T
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
-#endif
-}
-
-void sunxi_usb_phy_init(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- phy->init_count++;
- if (phy->init_count != 1)
- return;
-
- setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-
- sunxi_usb_phy_config(phy);
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
-
-#ifdef CONFIG_MACH_SUN8I_A83T
- if (phy->id == 0) {
- setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
- SUNXI_PHY_CTL_VBUSVLDEXT);
- clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
- SUNXI_PHY_CTL_SIDDQ);
- }
-#endif
-}
-
-void sunxi_usb_phy_exit(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- phy->init_count--;
- if (phy->init_count != 0)
- return;
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
-
-#ifdef CONFIG_MACH_SUN8I_A83T
- if (phy->id == 0) {
- setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
- SUNXI_PHY_CTL_SIDDQ);
- }
-#endif
-
- clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-}
-
-void sunxi_usb_phy_power_on(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (initial_usb_scan_delay) {
- mdelay(initial_usb_scan_delay);
- initial_usb_scan_delay = 0;
- }
-
- phy->power_on_count++;
- if (phy->power_on_count != 1)
- return;
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 1);
-}
-
-void sunxi_usb_phy_power_off(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- phy->power_on_count--;
- if (phy->power_on_count != 0)
- return;
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 0);
-}
-
-int sunxi_usb_phy_vbus_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- int err, retries = 3;
-
- if (phy->gpio_vbus_det < 0)
- return phy->gpio_vbus_det;
-
- err = gpio_get_value(phy->gpio_vbus_det);
- /*
- * Vbus may have been provided by the board and just been turned of
- * some milliseconds ago on reset, what we're measuring then is a
- * residual charge on Vbus, sleep a bit and try again.
- */
- while (err > 0 && retries--) {
- mdelay(100);
- err = gpio_get_value(phy->gpio_vbus_det);
- }
-
- return err;
-}
-
-int sunxi_usb_phy_id_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (phy->gpio_id_det < 0)
- return phy->gpio_id_det;
-
- return gpio_get_value(phy->gpio_id_det);
-}
-
-int sunxi_usb_phy_probe(void)
-{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_usb_phy *phy;
- int i, ret = 0;
-
- for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
- phy = &sunxi_usb_phy[i];
-
- phy->gpio_vbus = get_vbus_gpio(i);
- if (phy->gpio_vbus >= 0) {
- ret = gpio_request(phy->gpio_vbus, "usb_vbus");
- if (ret)
- return ret;
- ret = gpio_direction_output(phy->gpio_vbus, 0);
- if (ret)
- return ret;
- }
-
- phy->gpio_vbus_det = get_vbus_detect_gpio(i);
- if (phy->gpio_vbus_det >= 0) {
- ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
- if (ret)
- return ret;
- ret = gpio_direction_input(phy->gpio_vbus_det);
- if (ret)
- return ret;
- }
-
- phy->gpio_id_det = get_id_detect_gpio(i);
- if (phy->gpio_id_det >= 0) {
- ret = gpio_request(phy->gpio_id_det, "usb_id_det");
- if (ret)
- return ret;
- ret = gpio_direction_input(phy->gpio_id_det);
- if (ret)
- return ret;
- sunxi_gpio_set_pull(phy->gpio_id_det,
- SUNXI_GPIO_PULL_UP);
- }
- }
-
- setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- return 0;
-}
-
-int sunxi_usb_phy_remove(void)
-{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_usb_phy *phy;
- int i;
-
- clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
- phy = &sunxi_usb_phy[i];
-
- if (phy->gpio_vbus >= 0)
- gpio_free(phy->gpio_vbus);
-
- if (phy->gpio_vbus_det >= 0)
- gpio_free(phy->gpio_vbus_det);
-
- if (phy->gpio_id_det >= 0)
- gpio_free(phy->gpio_id_det);
- }
-
- return 0;
-}
projects / oweals / u-boot.git / commitdiff