Sound: Add FDT support to driver
authorRajeshwari Shinde <rajeshwari.s@samsung.com>
Wed, 26 Dec 2012 20:03:17 +0000 (20:03 +0000)
committerMinkyu Kang <mk7.kang@samsung.com>
Tue, 8 Jan 2013 01:54:33 +0000 (10:54 +0900)
This patch adds FDT support to the sound driver.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
drivers/sound/sound.c
include/sound.h

index 4c74534c9536872ce134dc0de0d79eec3d8068a8..fa8432d48acedc2acc0fc341b90fee62eb9e980c 100644 (file)
 #include <malloc.h>
 #include <common.h>
 #include <asm/io.h>
+#include <libfdt.h>
+#include <fdtdec.h>
 #include <i2c.h>
 #include <i2s.h>
 #include <sound.h>
-#include "wm8994.h"
 #include <asm/arch/sound.h>
+#include "wm8994.h"
 
 /* defines */
 #define SOUND_400_HZ 400
 #define SOUND_BITS_IN_BYTE 8
 
 static struct i2stx_info g_i2stx_pri;
-static struct sound_codec_info g_codec_info;
 
 /*
- * get_sound_fdt_values gets fdt values for i2s parameters
+ * get_sound_i2s_values gets values for i2s parameters
  *
  * @param i2stx_info   i2s transmitter transfer param structure
- * @param blob         FDT blob
- */
-static void get_sound_i2s_values(struct i2stx_info *i2s)
-{
-       i2s->base_address = samsung_get_base_i2s();
-       i2s->audio_pll_clk = I2S_PLL_CLK;
-       i2s->samplingrate = I2S_SAMPLING_RATE;
-       i2s->bitspersample = I2S_BITS_PER_SAMPLE;
-       i2s->channels = I2S_CHANNELS;
-       i2s->rfs = I2S_RFS;
-       i2s->bfs = I2S_BFS;
-}
-
-/*
- * Gets fdt values for wm8994 config parameters
- *
- * @param pcodec_info  codec information structure
- * @param blob         FDT blob
- * @return             int value, 0 for success
+ * @param blob         FDT blob if enabled else NULL
  */
-static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
+static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
 {
+#ifdef CONFIG_OF_CONTROL
+       int node;
        int error = 0;
+       int base;
 
-       switch (AUDIO_COMPAT) {
-       case AUDIO_COMPAT_SPI:
-               debug("%s: Support not added for SPI interface\n", __func__);
+       node = fdtdec_next_compatible(blob, 0,
+                                       COMPAT_SAMSUNG_EXYNOS5_SOUND);
+       if (node <= 0) {
+               debug("EXYNOS_SOUND: No node for sound in device tree\n");
                return -1;
-               break;
-       case AUDIO_COMPAT_I2C:
-               pcodec_info->i2c_bus = AUDIO_I2C_BUS;
-               pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
-               debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
-               break;
-       default:
-               debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT);
+       }
+
+       /*
+        * Get the pre-defined sound specific values from FDT.
+        * All of these are expected to be correct otherwise
+        * wrong register values in i2s setup parameters
+        * may result in no sound play.
+        */
+       base = fdtdec_get_addr(blob, node, "reg");
+       if (base == FDT_ADDR_T_NONE) {
+               debug("%s: Missing  i2s base\n", __func__);
                return -1;
        }
+       i2s->base_address = base;
 
+       i2s->audio_pll_clk = fdtdec_get_int(blob,
+                               node, "samsung,i2s-epll-clock-frequency", -1);
+       error |= i2s->audio_pll_clk;
+       debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
+       i2s->samplingrate = fdtdec_get_int(blob,
+                               node, "samsung,i2s-sampling-rate", -1);
+       error |= i2s->samplingrate;
+       debug("samplingrate = %d\n", i2s->samplingrate);
+       i2s->bitspersample = fdtdec_get_int(blob,
+                               node, "samsung,i2s-bits-per-sample", -1);
+       error |= i2s->bitspersample;
+       debug("bitspersample = %d\n", i2s->bitspersample);
+       i2s->channels = fdtdec_get_int(blob,
+                       node, "samsung,i2s-channels", -1);
+       error |= i2s->channels;
+       debug("channels = %d\n", i2s->channels);
+       i2s->rfs = fdtdec_get_int(blob,
+                               node, "samsung,i2s-lr-clk-framesize", -1);
+       error |= i2s->rfs;
+       debug("rfs = %d\n", i2s->rfs);
+       i2s->bfs = fdtdec_get_int(blob,
+                               node, "samsung,i2s-bit-clk-framesize", -1);
+       error |= i2s->bfs;
+       debug("bfs = %d\n", i2s->bfs);
        if (error == -1) {
-               debug("fail to get wm8994 codec node properties\n");
+               debug("fail to get sound i2s node properties\n");
                return -1;
        }
-
+#else
+       i2s->base_address = samsung_get_base_i2s();
+       i2s->audio_pll_clk = I2S_PLL_CLK;
+       i2s->samplingrate = I2S_SAMPLING_RATE;
+       i2s->bitspersample = I2S_BITS_PER_SAMPLE;
+       i2s->channels = I2S_CHANNELS;
+       i2s->rfs = I2S_RFS;
+       i2s->bfs = I2S_BFS;
+#endif
        return 0;
 }
 
 /*
- * Gets fdt values for codec config parameters
+ * Init codec
  *
- * @param pcodec_info  codec information structure
- * @param blob         FDT blob
- * @return             int value, 0 for success
+ * @param blob          FDT blob
+ * @param pi2s_tx      i2s parameters required by codec
+ * @return              int value, 0 for success
  */
-static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
+static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
 {
-       int error = 0;
+       int ret;
        const char *codectype;
+#ifdef CONFIG_OF_CONTROL
+       int node;
 
-       codectype =  AUDIO_CODEC;
+       /* Get the node from FDT for sound */
+       node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SOUND);
+       if (node <= 0) {
+               debug("EXYNOS_SOUND: No node for sound in device tree\n");
+               debug("node = %d\n", node);
+               return -1;
+       }
 
+       /*
+        * Get the pre-defined sound codec specific values from FDT.
+        * All of these are expected to be correct otherwise sound
+        * can not be played
+        */
+       codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
+       debug("device = %s\n", codectype);
+#else
+       codectype =  AUDIO_CODEC;
+#endif
        if (!strcmp(codectype, "wm8994")) {
-               pcodec_info->codec_type = CODEC_WM_8994;
-               error = get_sound_wm8994_values(pcodec_info);
+               /* Check the codec type and initialise the same */
+               ret = wm8994_init(blob, WM8994_AIF2,
+                       pi2s_tx->samplingrate,
+                       (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+                       pi2s_tx->bitspersample, pi2s_tx->channels);
        } else {
-               error = -1;
+               debug("%s: Unknown code type %s\n", __func__,
+                     codectype);
+               return -1;
        }
-
-       if (error == -1) {
-               debug("fail to get sound codec node properties\n");
+       if (ret) {
+               debug("%s: Codec init failed\n", __func__);
                return -1;
        }
 
        return 0;
 }
 
-int sound_init(void)
+int sound_init(const void *blob)
 {
        int ret;
        struct i2stx_info *pi2s_tx = &g_i2stx_pri;
-       struct sound_codec_info *pcodec_info = &g_codec_info;
 
        /* Get the I2S Values */
-       get_sound_i2s_values(pi2s_tx);
+       if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
+               debug(" FDT I2S values failed\n");
+               return -1;
+       }
 
-       /* Get the codec Values */
-       if (get_sound_codec_values(pcodec_info) < 0)
+       if (codec_init(blob, pi2s_tx) < 0) {
+               debug(" Codec init failed\n");
                return -1;
+       }
 
        ret = i2s_tx_init(pi2s_tx);
        if (ret) {
@@ -137,21 +185,6 @@ int sound_init(void)
                return ret;
        }
 
-       /* Check the codec type and initialise the same */
-       if (pcodec_info->codec_type == CODEC_WM_8994) {
-               ret = wm8994_init(pcodec_info, WM8994_AIF2,
-                       pi2s_tx->samplingrate,
-                       (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
-                       pi2s_tx->bitspersample, pi2s_tx->channels);
-       } else {
-               debug("%s: Unknown code type %d\n", __func__,
-                     pcodec_info->codec_type);
-               return -1;
-       }
-       if (ret) {
-               debug("%s: Codec init failed\n", __func__);
-               return -1;
-       }
 
        return ret;
 }
index ea0b1158f80ba682529a5588efe4bd5993b5575d..d73839d9f04a08b7891f5bac48b4289c712bebdf 100644 (file)
@@ -46,10 +46,10 @@ struct sound_codec_info {
 
 /*
  * Initialises audio sub system
- *
+ * @param blob Pointer of device tree node or NULL if none.
  * @return     int value 0 for success, -1 for error
  */
-int sound_init(void);
+int sound_init(const void *blob);
 
 /*
  * plays the pcm data buffer in pcm_data.h through i2s1 to make the