usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls
authorLukasz Majewski <l.majewski@samsung.com>
Wed, 2 May 2012 11:11:35 +0000 (13:11 +0200)
committerMarek Vasut <marex@denx.de>
Sun, 20 May 2012 06:32:33 +0000 (08:32 +0200)
This patch cleans up the Samsung's UDC driver. It replaces several
DEBUG_* macros with debug_cond().

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
drivers/usb/gadget/s3c_udc_otg.c
drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
include/usb/s3c_udc.h

index 6b922d26674004b5e8d8da7c5d443adbf5f57b7f..997d0ff860bb511d6bd0d15826b1c81aac02b87c 100644 (file)
 
 #define OTG_DMA_MODE           1
 
-#undef DEBUG_S3C_UDC_SETUP
-#undef DEBUG_S3C_UDC_EP0
-#undef DEBUG_S3C_UDC_ISR
-#undef DEBUG_S3C_UDC_OUT_EP
-#undef DEBUG_S3C_UDC_IN_EP
-#undef DEBUG_S3C_UDC
-
-/* #define DEBUG_S3C_UDC_SETUP */
-/* #define DEBUG_S3C_UDC_EP0 */
-/* #define DEBUG_S3C_UDC_ISR */
-/* #define DEBUG_S3C_UDC_OUT_EP */
-/* #define DEBUG_S3C_UDC_IN_EP */
-/* #define DEBUG_S3C_UDC */
+#define DEBUG_SETUP 0
+#define DEBUG_EP0 0
+#define DEBUG_ISR 0
+#define DEBUG_OUT_EP 0
+#define DEBUG_IN_EP 0
 
 #include <usb/s3c_udc.h>
 
@@ -217,7 +209,7 @@ void otg_phy_off(struct s3c_udc *dev)
  */
 static void udc_disable(struct s3c_udc *dev)
 {
-       DEBUG_SETUP("%s: %p\n", __func__, dev);
+       debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
        udc_set_address(dev, 0);
 
@@ -235,7 +227,7 @@ static void udc_reinit(struct s3c_udc *dev)
 {
        unsigned int i;
 
-       DEBUG_SETUP("%s: %p\n", __func__, dev);
+       debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
        /* device/ep0 records init */
        INIT_LIST_HEAD(&dev->gadget.ep_list);
@@ -266,12 +258,13 @@ static void udc_reinit(struct s3c_udc *dev)
  */
 static int udc_enable(struct s3c_udc *dev)
 {
-       DEBUG_SETUP("%s: %p\n", __func__, dev);
+       debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
        otg_phy_init(dev);
        reconfig_usbd();
 
-       DEBUG_SETUP("S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
+       debug_cond(DEBUG_SETUP != 0,
+                  "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
                    readl(&reg->gintmsk));
 
        dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -288,7 +281,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
        int retval = 0;
        unsigned long flags;
 
-       DEBUG_SETUP("%s: %s\n", __func__, "no name");
+       debug_cond(DEBUG_SETUP != 0, "%s: %s\n", __func__, "no name");
 
        if (!driver
            || (driver->speed != USB_SPEED_FULL
@@ -312,7 +305,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
        retval = driver->bind(&dev->gadget);
        if (retval) {
-               DEBUG_SETUP("%s: bind to driver --> error %d\n",
+               debug_cond(DEBUG_SETUP != 0,
+                          "%s: bind to driver --> error %d\n",
                            dev->gadget.name, retval);
                dev->driver = 0;
                return retval;
@@ -320,7 +314,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
        enable_irq(IRQ_OTG);
 
-       DEBUG_SETUP("Registered gadget driver %s\n", dev->gadget.name);
+       debug_cond(DEBUG_SETUP != 0,
+                  "Registered gadget driver %s\n", dev->gadget.name);
        udc_enable(dev);
 
        return 0;
@@ -378,7 +373,7 @@ static void done(struct s3c_ep *ep, struct s3c_request *req, int status)
        /* don't modify queue heads during completion callback */
        ep->stopped = 1;
 
-#ifdef DEBUG_S3C_UDC
+#ifdef DEBUG
        printf("calling complete callback\n");
        {
                int i, len = req->req.length;
index 56e6e53de6fb89280872ab653240dd4d5a8ae62c..4be603783c04763ef4d7b6d3a36787cfbb5d24b0 100644 (file)
@@ -53,7 +53,7 @@ static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev)
        writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK,
               &reg->in_endp[EP0_CON].diepctl);
 
-       DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
                __func__, readl(&reg->in_endp[EP0_CON].diepctl));
        dev->ep0state = WAIT_FOR_IN_COMPLETE;
 }
@@ -62,7 +62,8 @@ void s3c_udc_pre_setup(void)
 {
        u32 ep_ctrl;
 
-       debug_cond(DEBUG_IN_EP, "%s : Prepare Setup packets.\n", __func__);
+       debug_cond(DEBUG_IN_EP,
+                  "%s : Prepare Setup packets.\n", __func__);
 
        invalidate_dcache_range((unsigned long) usb_ctrl_dma_addr,
                                (unsigned long) usb_ctrl_dma_addr
@@ -75,9 +76,9 @@ void s3c_udc_pre_setup(void)
        ep_ctrl = readl(&reg->out_endp[EP0_CON].doepctl);
        writel(ep_ctrl|DEPCTL_EPENA, &reg->out_endp[EP0_CON].doepctl);
 
-       DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
                __func__, readl(&reg->in_endp[EP0_CON].diepctl));
-       DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
                __func__, readl(&reg->out_endp[EP0_CON].doepctl));
 
 }
@@ -86,9 +87,9 @@ static inline void s3c_ep0_complete_out(void)
 {
        u32 ep_ctrl;
 
-       DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
                __func__, readl(&reg->in_endp[EP0_CON].diepctl));
-       DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
                __func__, readl(&reg->out_endp[EP0_CON].doepctl));
 
        debug_cond(DEBUG_IN_EP,
@@ -106,9 +107,9 @@ static inline void s3c_ep0_complete_out(void)
        writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK,
               &reg->out_endp[EP0_CON].doepctl);
 
-       DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
                __func__, readl(&reg->in_endp[EP0_CON].diepctl));
-       DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
+       debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
                __func__, readl(&reg->out_endp[EP0_CON].doepctl));
 
 }
@@ -145,14 +146,15 @@ static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req)
               &reg->out_endp[ep_num].doeptsiz);
        writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, &reg->out_endp[ep_num].doepctl);
 
-       DEBUG_OUT_EP("%s: EP%d RX DMA start : DOEPDMA = 0x%x,"
-                    "DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n"
-                    "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
-                    __func__, ep_num,
-                    readl(&reg->out_endp[ep_num].doepdma),
-                    readl(&reg->out_endp[ep_num].doeptsiz),
-                    readl(&reg->out_endp[ep_num].doepctl),
-                    buf, pktcnt, length);
+       debug_cond(DEBUG_OUT_EP != 0,
+                  "%s: EP%d RX DMA start : DOEPDMA = 0x%x,"
+                  "DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n"
+                  "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
+                  __func__, ep_num,
+                  readl(&reg->out_endp[ep_num].doepdma),
+                  readl(&reg->out_endp[ep_num].doeptsiz),
+                  readl(&reg->out_endp[ep_num].doepctl),
+                  buf, pktcnt, length);
        return 0;
 
 }
@@ -225,8 +227,9 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
        u32 *p = the_controller->dma_buf[ep_index(ep)+1];
 
        if (list_empty(&ep->queue)) {
-               DEBUG_OUT_EP("%s: RX DMA done : NULL REQ on OUT EP-%d\n",
-                                       __func__, ep_num);
+               debug_cond(DEBUG_OUT_EP != 0,
+                          "%s: RX DMA done : NULL REQ on OUT EP-%d\n",
+                          __func__, ep_num);
                return;
 
        }
@@ -249,14 +252,15 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
        req->req.actual += min(xfer_size, req->req.length - req->req.actual);
        is_short = (xfer_size < ep->ep.maxpacket);
 
-       DEBUG_OUT_EP("%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
-                    "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n",
-                       __func__, ep_num, req->req.actual, req->req.length,
-                       is_short, ep_tsr, xfer_size);
+       debug_cond(DEBUG_OUT_EP != 0,
+                  "%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
+                  "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n",
+                  __func__, ep_num, req->req.actual, req->req.length,
+                  is_short, ep_tsr, xfer_size);
 
        if (is_short || req->req.actual == req->req.length) {
                if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) {
-                       DEBUG_OUT_EP("  => Send ZLP\n");
+                       debug_cond(DEBUG_OUT_EP != 0, " => Send ZLP\n");
                        s3c_udc_ep0_zlp(dev);
                        /* packet will be completed in complete_tx() */
                        dev->ep0state = WAIT_FOR_IN_COMPLETE;
@@ -266,8 +270,9 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
                        if (!list_empty(&ep->queue)) {
                                req = list_entry(ep->queue.next,
                                        struct s3c_request, queue);
-                               DEBUG_OUT_EP("%s: Next Rx request start...\n",
-                                        __func__);
+                               debug_cond(DEBUG_OUT_EP != 0,
+                                          "%s: Next Rx request start...\n",
+                                          __func__);
                                setdma_rx(ep, req);
                        }
                }
@@ -392,8 +397,9 @@ static void process_ep_in_intr(struct s3c_udc *dev)
        while (ep_intr) {
                if (ep_intr & DAINT_IN_EP_INT(1)) {
                        ep_intr_status = readl(&reg->in_endp[ep_num].diepint);
-                       debug_cond(DEBUG_IN_EP, "\tEP%d-IN : DIEPINT = 0x%x\n",
-                                               ep_num, ep_intr_status);
+                       debug_cond(DEBUG_IN_EP,
+                                  "\tEP%d-IN : DIEPINT = 0x%x\n",
+                                  ep_num, ep_intr_status);
 
                        /* Interrupt Clear */
                        writel(ep_intr_status, &reg->in_endp[ep_num].diepint);
@@ -430,16 +436,18 @@ static void process_ep_out_intr(struct s3c_udc *dev)
        u8 ep_num = 0;
 
        ep_intr = readl(&reg->daint);
-       DEBUG_OUT_EP("*** %s: EP OUT interrupt : DAINT = 0x%x\n",
-                               __func__, ep_intr);
+       debug_cond(DEBUG_OUT_EP != 0,
+                  "*** %s: EP OUT interrupt : DAINT = 0x%x\n",
+                  __func__, ep_intr);
 
        ep_intr = (ep_intr >> DAINT_OUT_BIT) & DAINT_MASK;
 
        while (ep_intr) {
                if (ep_intr & 0x1) {
                        ep_intr_status = readl(&reg->out_endp[ep_num].doepint);
-                       DEBUG_OUT_EP("\tEP%d-OUT : DOEPINT = 0x%x\n",
-                                               ep_num, ep_intr_status);
+                       debug_cond(DEBUG_OUT_EP != 0,
+                                  "\tEP%d-OUT : DOEPINT = 0x%x\n",
+                                  ep_num, ep_intr_status);
 
                        /* Interrupt Clear */
                        writel(ep_intr_status, &reg->out_endp[ep_num].doepint);
@@ -457,7 +465,8 @@ static void process_ep_out_intr(struct s3c_udc *dev)
 
                                if (ep_intr_status &
                                    CTRL_OUT_EP_SETUP_PHASE_DONE) {
-                                       DEBUG_OUT_EP("SETUP packet arrived\n");
+                                       debug_cond(DEBUG_OUT_EP != 0,
+                                                  "SETUP packet arrived\n");
                                        s3c_handle_ep0(dev);
                                }
                        } else {
@@ -503,7 +512,8 @@ static int s3c_udc_irq(int irq, void *_dev)
                usb_status = (readl(&reg->dsts) & 0x6);
 
                if (usb_status & (USB_FULL_30_60MHZ | USB_FULL_48MHZ)) {
-                       debug_cond(DEBUG_ISR, "\t\tFull Speed Detection\n");
+                       debug_cond(DEBUG_ISR,
+                                  "\t\tFull Speed Detection\n");
                        set_max_pktsize(dev, USB_SPEED_FULL);
 
                } else {
@@ -571,7 +581,8 @@ static int s3c_udc_irq(int irq, void *_dev)
 
                } else {
                        reset_available = 1;
-                       debug_cond(DEBUG_ISR, "\t\tRESET handling skipped\n");
+                       debug_cond(DEBUG_ISR,
+                                  "\t\tRESET handling skipped\n");
                }
        }
 
@@ -635,7 +646,7 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req,
                _req, _req->length, _req->buf,
                list_empty(&ep->queue), ep->stopped);
 
-#ifdef DEBUG_S3C_UDC
+#ifdef DEBUG
        {
                int i, len = _req->length;
 
@@ -662,14 +673,15 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req,
                } else if (ep_is_in(ep)) {
                        gintsts = readl(&reg->gintsts);
                        debug_cond(DEBUG_IN_EP,
-                               "%s: ep_is_in, S3C_UDC_OTG_GINTSTS=0x%x\n",
-                               __func__, gintsts);
+                                  "%s: ep_is_in, S3C_UDC_OTG_GINTSTS=0x%x\n",
+                                  __func__, gintsts);
 
                        setdma_tx(ep, req);
                } else {
                        gintsts = readl(&reg->gintsts);
-                       DEBUG_OUT_EP("%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n",
-                               __func__, gintsts);
+                       debug_cond(DEBUG_OUT_EP != 0,
+                                  "%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n",
+                                  __func__, gintsts);
 
                        setdma_rx(ep, req);
                }
@@ -697,7 +709,7 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
 
        max = ep_maxpacket(ep);
 
-       DEBUG_EP0("%s: max = %d\n", __func__, max);
+       debug_cond(DEBUG_EP0 != 0, "%s: max = %d\n", __func__, max);
 
        count = setdma_tx(ep, req);
 
@@ -712,10 +724,11 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
                        is_last = 1;
        }
 
-       DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__,
-                 ep->ep.name, count,
-                 is_last ? "/L" : "",
-                 req->req.length - req->req.actual - count, req);
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: wrote %s %d bytes%s %d left %p\n", __func__,
+                  ep->ep.name, count,
+                  is_last ? "/L" : "",
+                  req->req.length - req->req.actual - count, req);
 
        /* requests complete when all IN data is in the FIFO */
        if (is_last) {
@@ -736,8 +749,9 @@ int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max)
                                (unsigned long) ep->dev->dma_buf[ep_index(ep)]
                                + DMA_BUFFER_SIZE);
 
-       DEBUG_EP0("%s: bytes=%d, ep_index=%d %p\n", __func__,
-                 bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]);
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: bytes=%d, ep_index=%d %p\n", __func__,
+                  bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]);
 
        return bytes;
 }
@@ -756,8 +770,9 @@ static void udc_set_address(struct s3c_udc *dev, unsigned char address)
 
        s3c_udc_ep0_zlp(dev);
 
-       DEBUG_EP0("%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n",
-               __func__, address, readl(&reg->dcfg));
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n",
+                  __func__, address, readl(&reg->dcfg));
 
        dev->usb_address = address;
 }
@@ -778,8 +793,9 @@ static inline void s3c_udc_ep0_set_stall(struct s3c_ep *ep)
 
        writel(ep_ctrl, &reg->in_endp[EP0_CON].diepctl);
 
-       DEBUG_EP0("%s: set ep%d stall, DIEPCTL0 = 0x%x\n",
-               __func__, ep_index(ep), &reg->in_endp[EP0_CON].diepctl);
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: set ep%d stall, DIEPCTL0 = 0x%p\n",
+                  __func__, ep_index(ep), &reg->in_endp[EP0_CON].diepctl);
        /*
         * The application can only set this bit, and the core clears it,
         * when a SETUP token is received for this endpoint
@@ -803,8 +819,9 @@ static void s3c_ep0_read(struct s3c_udc *dev)
                return;
        }
 
-       DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
-               __func__, req, req->req.length, req->req.actual);
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
+                  __func__, req, req->req.length, req->req.actual);
 
        if (req->req.length == 0) {
                /* zlp for Set_configuration, Set_interface,
@@ -813,8 +830,9 @@ static void s3c_ep0_read(struct s3c_udc *dev)
                ep->len = 0;
                s3c_udc_ep0_zlp(dev);
 
-               DEBUG_EP0("%s: req.length = 0, bRequest = %d\n",
-                         __func__, usb_ctrl->bRequest);
+               debug_cond(DEBUG_EP0 != 0,
+                          "%s: req.length = 0, bRequest = %d\n",
+                          __func__, usb_ctrl->bRequest);
                return;
        }
 
@@ -836,12 +854,13 @@ static int s3c_ep0_write(struct s3c_udc *dev)
                req = list_entry(ep->queue.next, struct s3c_request, queue);
 
        if (!req) {
-               DEBUG_EP0("%s: NULL REQ\n", __func__);
+               debug_cond(DEBUG_EP0 != 0, "%s: NULL REQ\n", __func__);
                return 0;
        }
 
-       DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
-               __func__, req, req->req.length, req->req.actual);
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
+                  __func__, req, req->req.length, req->req.actual);
 
        if (req->req.length - req->req.actual == ep0_fifo_size) {
                /* Next write will end with the packet size, */
@@ -854,11 +873,13 @@ static int s3c_ep0_write(struct s3c_udc *dev)
        if ((ret == 1) && !need_zlp) {
                /* Last packet */
                dev->ep0state = WAIT_FOR_COMPLETE;
-               DEBUG_EP0("%s: finished, waiting for status\n", __func__);
+               debug_cond(DEBUG_EP0 != 0,
+                          "%s: finished, waiting for status\n", __func__);
 
        } else {
                dev->ep0state = DATA_STATE_XMIT;
-               DEBUG_EP0("%s: not finished\n", __func__);
+               debug_cond(DEBUG_EP0 != 0,
+                          "%s: not finished\n", __func__);
        }
 
        return 1;
@@ -873,30 +894,35 @@ int s3c_udc_get_status(struct s3c_udc *dev,
        u32 ep_ctrl;
        u32 *p = the_controller->dma_buf[1];
 
-       DEBUG_SETUP("%s: *** USB_REQ_GET_STATUS\n", __func__);
+       debug_cond(DEBUG_SETUP != 0,
+                  "%s: *** USB_REQ_GET_STATUS\n", __func__);
        printf("crq->brequest:0x%x\n", crq->bRequestType & USB_RECIP_MASK);
        switch (crq->bRequestType & USB_RECIP_MASK) {
        case USB_RECIP_INTERFACE:
                g_status = 0;
-               DEBUG_SETUP("\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n",
-                           g_status);
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n",
+                          g_status);
                break;
 
        case USB_RECIP_DEVICE:
                g_status = 0x1; /* Self powered */
-               DEBUG_SETUP("\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n",
-                           g_status);
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n",
+                          g_status);
                break;
 
        case USB_RECIP_ENDPOINT:
                if (crq->wLength > 2) {
-                       DEBUG_SETUP("\tGET_STATUS:Not support EP or wLength\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tGET_STATUS:Not support EP or wLength\n");
                        return 1;
                }
 
                g_status = dev->ep[ep_num].stopped;
-               DEBUG_SETUP("\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n",
-                           g_status);
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n",
+                          g_status);
 
                break;
 
@@ -1134,11 +1160,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
        ep_num = ep_index(ep);
 
        dev = ep->dev;
-       DEBUG_SETUP("%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n",
-               __func__, ep_num, ep_is_in(ep), clear_feature_flag);
+       debug_cond(DEBUG_SETUP != 0,
+                  "%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n",
+                  __func__, ep_num, ep_is_in(ep), clear_feature_flag);
 
        if (usb_ctrl->wLength != 0) {
-               DEBUG_SETUP("\tCLEAR_FEATURE: wLength is not zero.....\n");
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tCLEAR_FEATURE: wLength is not zero.....\n");
                return 1;
        }
 
@@ -1146,11 +1174,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
        case USB_RECIP_DEVICE:
                switch (usb_ctrl->wValue) {
                case USB_DEVICE_REMOTE_WAKEUP:
-                       DEBUG_SETUP("\tOFF:USB_DEVICE_REMOTE_WAKEUP\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tOFF:USB_DEVICE_REMOTE_WAKEUP\n");
                        break;
 
                case USB_DEVICE_TEST_MODE:
-                       DEBUG_SETUP("\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n");
                        /** @todo Add CLEAR_FEATURE for TEST modes. */
                        break;
                }
@@ -1159,8 +1189,9 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
                break;
 
        case USB_RECIP_ENDPOINT:
-               DEBUG_SETUP("\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n",
-                               usb_ctrl->wValue);
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n",
+                          usb_ctrl->wValue);
 
                if (usb_ctrl->wValue == USB_ENDPOINT_HALT) {
                        if (ep_num == 0) {
@@ -1193,11 +1224,13 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
        ep_num = ep_index(ep);
        dev = ep->dev;
 
-       DEBUG_SETUP("%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n",
+       debug_cond(DEBUG_SETUP != 0,
+                  "%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n",
                    __func__, ep_num);
 
        if (usb_ctrl->wLength != 0) {
-               DEBUG_SETUP("\tSET_FEATURE: wLength is not zero.....\n");
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tSET_FEATURE: wLength is not zero.....\n");
                return 1;
        }
 
@@ -1205,20 +1238,24 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
        case USB_RECIP_DEVICE:
                switch (usb_ctrl->wValue) {
                case USB_DEVICE_REMOTE_WAKEUP:
-                       DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n");
                        break;
                case USB_DEVICE_B_HNP_ENABLE:
-                       DEBUG_SETUP("\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
                        break;
 
                case USB_DEVICE_A_HNP_SUPPORT:
                        /* RH port supports HNP */
-                       DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n");
                        break;
 
                case USB_DEVICE_A_ALT_HNP_SUPPORT:
                        /* other RH port does */
-                       DEBUG_SETUP("\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
                        break;
                }
 
@@ -1226,11 +1263,13 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
                return 0;
 
        case USB_RECIP_INTERFACE:
-               DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_INTERFACE\n");
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tSET_FEATURE: USB_RECIP_INTERFACE\n");
                break;
 
        case USB_RECIP_ENDPOINT:
-               DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_ENDPOINT\n");
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tSET_FEATURE: USB_RECIP_ENDPOINT\n");
                if (usb_ctrl->wValue == USB_ENDPOINT_HALT) {
                        if (ep_num == 0) {
                                s3c_udc_ep0_set_stall(ep);
@@ -1262,14 +1301,15 @@ void s3c_ep0_setup(struct s3c_udc *dev)
        /* read control req from fifo (8 bytes) */
        s3c_fifo_read(ep, (u32 *)usb_ctrl, 8);
 
-       DEBUG_SETUP("%s: bRequestType = 0x%x(%s), bRequest = 0x%x"
-                   "\twLength = 0x%x, wValue = 0x%x, wIndex= 0x%x\n",
-                   __func__, usb_ctrl->bRequestType,
-                   (usb_ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT",
-                   usb_ctrl->bRequest,
-                   usb_ctrl->wLength, usb_ctrl->wValue, usb_ctrl->wIndex);
+       debug_cond(DEBUG_SETUP != 0,
+                  "%s: bRequestType = 0x%x(%s), bRequest = 0x%x"
+                  "\twLength = 0x%x, wValue = 0x%x, wIndex= 0x%x\n",
+                  __func__, usb_ctrl->bRequestType,
+                  (usb_ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT",
+                  usb_ctrl->bRequest,
+                  usb_ctrl->wLength, usb_ctrl->wValue, usb_ctrl->wIndex);
 
-#ifdef DEBUG_S3C_UDC
+#ifdef DEBUG
        {
                int i, len = sizeof(*usb_ctrl);
                char *p = (char *)usb_ctrl;
@@ -1286,10 +1326,12 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 
        if (usb_ctrl->bRequest == GET_MAX_LUN_REQUEST &&
            usb_ctrl->wLength != 1) {
-               DEBUG_SETUP("\t%s:GET_MAX_LUN_REQUEST:invalid",
-                             __func__);
-               DEBUG_SETUP("wLength = %d, setup returned\n",
-                           usb_ctrl->wLength);
+               debug_cond(DEBUG_SETUP != 0,
+                          "\t%s:GET_MAX_LUN_REQUEST:invalid",
+                          __func__);
+               debug_cond(DEBUG_SETUP != 0,
+                          "wLength = %d, setup returned\n",
+                          usb_ctrl->wLength);
 
                s3c_udc_ep0_set_stall(ep);
                dev->ep0state = WAIT_FOR_SETUP;
@@ -1298,8 +1340,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
        } else if (usb_ctrl->bRequest == BOT_RESET_REQUEST &&
                 usb_ctrl->wLength != 0) {
                /* Bulk-Only *mass storge reset of class-specific request */
-               DEBUG_SETUP("%s:BOT Rest:invalid wLength =%d, setup returned\n",
-                           __func__, usb_ctrl->wLength);
+               debug_cond(DEBUG_SETUP != 0,
+                          "%s:BOT Rest:invalid wLength =%d, setup returned\n",
+                          __func__, usb_ctrl->wLength);
 
                s3c_udc_ep0_set_stall(ep);
                dev->ep0state = WAIT_FOR_SETUP;
@@ -1323,8 +1366,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
        if (dev->req_std) {
                switch (usb_ctrl->bRequest) {
                case USB_REQ_SET_ADDRESS:
-               DEBUG_SETUP("%s: *** USB_REQ_SET_ADDRESS (%d)\n",
-                               __func__, usb_ctrl->wValue);
+               debug_cond(DEBUG_SETUP != 0,
+                          "%s: *** USB_REQ_SET_ADDRESS (%d)\n",
+                          __func__, usb_ctrl->wValue);
                        if (usb_ctrl->bRequestType
                                != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
                                break;
@@ -1333,9 +1377,11 @@ void s3c_ep0_setup(struct s3c_udc *dev)
                        return;
 
                case USB_REQ_SET_CONFIGURATION:
-                       DEBUG_SETUP("=====================================\n");
-                       DEBUG_SETUP("%s: USB_REQ_SET_CONFIGURATION (%d)\n",
-                                       __func__, usb_ctrl->wValue);
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "=====================================\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "%s: USB_REQ_SET_CONFIGURATION (%d)\n",
+                                  __func__, usb_ctrl->wValue);
 
                        if (usb_ctrl->bRequestType == USB_RECIP_DEVICE)
                                reset_available = 1;
@@ -1343,13 +1389,15 @@ void s3c_ep0_setup(struct s3c_udc *dev)
                        break;
 
                case USB_REQ_GET_DESCRIPTOR:
-                       DEBUG_SETUP("%s: *** USB_REQ_GET_DESCRIPTOR\n",
-                                   __func__);
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "%s: *** USB_REQ_GET_DESCRIPTOR\n",
+                                  __func__);
                        break;
 
                case USB_REQ_SET_INTERFACE:
-                       DEBUG_SETUP("%s: *** USB_REQ_SET_INTERFACE (%d)\n",
-                                       __func__, usb_ctrl->wValue);
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "%s: *** USB_REQ_SET_INTERFACE (%d)\n",
+                                  __func__, usb_ctrl->wValue);
 
                        if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE)
                                reset_available = 1;
@@ -1357,8 +1405,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
                        break;
 
                case USB_REQ_GET_CONFIGURATION:
-                       DEBUG_SETUP("%s: *** USB_REQ_GET_CONFIGURATION\n",
-                                   __func__);
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "%s: *** USB_REQ_GET_CONFIGURATION\n",
+                                  __func__);
                        break;
 
                case USB_REQ_GET_STATUS:
@@ -1384,8 +1433,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
                        break;
 
                default:
-                       DEBUG_SETUP("%s: *** Default of usb_ctrl->bRequest=0x%x"
-                               "happened.\n", __func__, usb_ctrl->bRequest);
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "%s: *** Default of usb_ctrl->bRequest=0x%x"
+                                  "happened.\n", __func__, usb_ctrl->bRequest);
                        break;
                }
        }
@@ -1394,7 +1444,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
        if (likely(dev->driver)) {
                /* device-2-host (IN) or no data setup command,
                 * process immediately */
-               DEBUG_SETUP("%s:usb_ctrlreq will be passed to fsg_setup()\n",
+               debug_cond(DEBUG_SETUP != 0,
+                          "%s:usb_ctrlreq will be passed to fsg_setup()\n",
                            __func__);
 
                spin_unlock(&dev->lock);
@@ -1406,17 +1457,20 @@ void s3c_ep0_setup(struct s3c_udc *dev)
                        s3c_udc_ep0_set_stall(ep);
                        dev->ep0state = WAIT_FOR_SETUP;
 
-                       DEBUG_SETUP("\tdev->driver->setup failed (%d),"
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tdev->driver->setup failed (%d),"
                                    " bRequest = %d\n",
                                i, usb_ctrl->bRequest);
 
 
                } else if (dev->req_pending) {
                        dev->req_pending = 0;
-                       DEBUG_SETUP("\tdev->req_pending...\n");
+                       debug_cond(DEBUG_SETUP != 0,
+                                  "\tdev->req_pending...\n");
                }
 
-               DEBUG_SETUP("\tep0state = %s\n", state_names[dev->ep0state]);
+               debug_cond(DEBUG_SETUP != 0,
+                          "\tep0state = %s\n", state_names[dev->ep0state]);
 
        }
 }
@@ -1427,18 +1481,21 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 static void s3c_handle_ep0(struct s3c_udc *dev)
 {
        if (dev->ep0state == WAIT_FOR_SETUP) {
-               DEBUG_OUT_EP("%s: WAIT_FOR_SETUP\n", __func__);
+               debug_cond(DEBUG_OUT_EP != 0,
+                          "%s: WAIT_FOR_SETUP\n", __func__);
                s3c_ep0_setup(dev);
 
        } else {
-               DEBUG_OUT_EP("%s: strange state!!(state = %s)\n",
+               debug_cond(DEBUG_OUT_EP != 0,
+                          "%s: strange state!!(state = %s)\n",
                        __func__, state_names[dev->ep0state]);
        }
 }
 
 static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep)
 {
-       DEBUG_EP0("%s: ep_is_in = %d\n", __func__, ep_is_in(ep));
+       debug_cond(DEBUG_EP0 != 0,
+                  "%s: ep_is_in = %d\n", __func__, ep_is_in(ep));
        if (ep_is_in(ep)) {
                dev->ep0state = DATA_STATE_XMIT;
                s3c_ep0_write(dev);
index 3e6135a6bd977c4f25201840111f6ebf2f549c0c..6a8fd4424415cecc770a4ca3de2e2cf4b8070d4f 100644 (file)
@@ -112,54 +112,6 @@ extern struct s3c_udc *the_controller;
 #define ep_index(EP) ((EP)->bEndpointAddress&0xF)
 #define ep_maxpacket(EP) ((EP)->ep.maxpacket)
 
-/*-------------------------------------------------------------------------*/
-/* #define DEBUG_UDC */
-#ifdef DEBUG_UDC
-#define DBG(stuff...)          printf("udc: " stuff)
-#else
-#define DBG(stuff...)          do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_SETUP
-#define DEBUG_SETUP(fmt, args...) printk(fmt, ##args)
-#else
-#define DEBUG_SETUP(fmt, args...) do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_EP0
-#define DEBUG_EP0(fmt, args...) printk(fmt, ##args)
-#else
-#define DEBUG_EP0(fmt, args...) do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_ISR
-#define DEBUG_ISR      1
-#else
-#define DEBUG_ISR      0
-#endif
-
-#ifdef DEBUG_S3C_UDC_OUT_EP
-#define DEBUG_OUT_EP(fmt, args...) printk(fmt, ##args)
-#else
-#define DEBUG_OUT_EP(fmt, args...) do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_IN_EP
-#define DEBUG_IN_EP    1
-#else
-#define DEBUG_IN_EP    0
-#endif
-
-#if defined(DEBUG_S3C_UDC_SETUP) || defined(DEBUG_S3C_UDC_EP0) || \
-       defined(DEBUG_S3C_UDC_ISR) || defined(DEBUG_S3C_UDC_OUT_EP) || \
-       defined(DEBUG_S3C_UDC_IN_EP) || defined(DEBUG_S3C_UDC)
-#define DEBUG
-#endif
-
-#define ERR(stuff...)          printf("ERR udc: " stuff)
-#define WARN(stuff...)         printf("WARNING udc: " stuff)
-#define INFO(stuff...)         printf("INFO udc: " stuff)
-
 extern void otg_phy_init(struct s3c_udc *dev);
 extern void otg_phy_off(struct s3c_udc *dev);