--- /dev/null
+ CONFIG_ARM=y
+ CONFIG_SYS_THUMB_BUILD=y
+ # CONFIG_SPL_SYS_THUMB_BUILD is not set
+ CONFIG_ARCH_MX6=y
+ CONFIG_SYS_TEXT_BASE=0x87800000
+ CONFIG_TARGET_COLIBRI_IMX6ULL=y
+ CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri"
+ CONFIG_DISTRO_DEFAULTS=y
+ CONFIG_FIT=y
+ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri-imx6ull/imximage.cfg,MX6ULL,IMX_NAND"
+ CONFIG_BOOTDELAY=1
+ # CONFIG_USE_BOOTCOMMAND is not set
+ # CONFIG_CONSOLE_MUX is not set
+ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+ CONFIG_VERSION_VARIABLE=y
+ # CONFIG_DISPLAY_BOARDINFO is not set
+ CONFIG_DISPLAY_BOARDINFO_LATE=y
+ CONFIG_BOARD_EARLY_INIT_F=y
+ CONFIG_SYS_PROMPT="Colibri iMX6ULL # "
+ # CONFIG_CMD_IMI is not set
+ # CONFIG_CMD_XIMG is not set
+ CONFIG_CMD_ASKENV=y
+ CONFIG_CMD_MEMTEST=y
+ CONFIG_CMD_DFU=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_GPT=y
+ # CONFIG_RANDOM_UUID is not set
+ CONFIG_CMD_I2C=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_NAND_TRIMFFS=y
+ CONFIG_CMD_NAND_TORTURE=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_USB_MASS_STORAGE=y
+ CONFIG_CMD_BMP=y
+ CONFIG_CMD_CACHE=y
++CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
++CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx6ull-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)"
+ CONFIG_CMD_UBI=y
+ # CONFIG_ISO_PARTITION is not set
+ CONFIG_OF_CONTROL=y
+ CONFIG_ENV_IS_IN_NAND=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_DFU_MMC=y
+ CONFIG_DFU_NAND=y
+ CONFIG_DM_GPIO=y
+ CONFIG_DM_I2C=y
+ CONFIG_SYS_I2C_MXC=y
+ CONFIG_FSL_ESDHC=y
+ CONFIG_MTD=y
+ CONFIG_NAND=y
+ CONFIG_NAND_MXS=y
+ CONFIG_NAND_MXS_DT=y
+ CONFIG_MTD_UBI_FASTMAP=y
+ CONFIG_PHYLIB=y
+ CONFIG_PHY_ADDR_ENABLE=y
+ CONFIG_PHY_MICREL=y
+ CONFIG_PHY_MICREL_KSZ90X1=y
+ CONFIG_NETDEVICES=y
+ CONFIG_FEC_MXC=y
+ CONFIG_PINCTRL=y
+ CONFIG_PINCTRL_IMX6=y
+ CONFIG_DM_REGULATOR=y
+ # CONFIG_SPL_SERIAL_PRESENT is not set
+ CONFIG_DM_SERIAL=y
+ CONFIG_MXC_UART=y
+ CONFIG_USB=y
+ CONFIG_USB_STORAGE=y
+ CONFIG_USB_GADGET=y
+ CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
+ CONFIG_CI_UDC=y
+ CONFIG_USB_GADGET_DOWNLOAD=y
+ CONFIG_USB_FUNCTION_SDP=y
+ CONFIG_VIDEO=y
+ CONFIG_OF_LIBFDT_OVERLAY=y
+ CONFIG_FDT_FIXUP_PARTITIONS=y
+ # CONFIG_EFI_LOADER is not set
--- /dev/null
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ /* SPDX-License-Identifier: GPL-2.0+ */
+ /*
+ * Copyright 2018 Toradex AG
+ *
+ * Configuration settings for the Colibri iMX6ULL module.
+ *
+ * based on colibri_imx7.h
+ */
+
+ #ifndef __COLIBRI_IMX6ULL_CONFIG_H
+ #define __COLIBRI_IMX6ULL_CONFIG_H
+
+ #include "mx6_common.h"
+ #define CONFIG_IOMUX_LPSR
+
+ /* #define CONFIG_DBG_MONITOR*/
+ #define PHYS_SDRAM_SIZE SZ_512M
+
+ /* Size of malloc() pool */
+ #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
+
+ /* Network */
+ #define CONFIG_MII
+ #define CONFIG_FEC_XCV_TYPE RMII
+ #define CONFIG_ETHPRIME "FEC"
+ #define CONFIG_FEC_MXC_PHYADDR 0
+
+ #define CONFIG_IP_DEFRAG
+ #define CONFIG_TFTP_BLOCKSIZE 16352
+ #define CONFIG_TFTP_TSIZE
+
+ /* ENET1 */
+ #define IMX_FEC_BASE ENET2_BASE_ADDR
+
+ /* MMC Config*/
+ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ #define CONFIG_SYS_FSL_USDHC_NUM 1
+
+ #undef CONFIG_BOOTM_PLAN9
+ #undef CONFIG_BOOTM_RTEMS
+
+ /* I2C configs */
+ #define CONFIG_SYS_I2C_SPEED 100000
+
+ #define CONFIG_IPADDR 192.168.10.2
+ #define CONFIG_NETMASK 255.255.255.0
+ #define CONFIG_SERVERIP 192.168.10.1
+
+ #define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
+
+ #define MEM_LAYOUT_ENV_SETTINGS \
+ "bootm_size=0x10000000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x87100000\0" \
+ "ramdisk_addr_r=0x82100000\0" \
+ "scriptaddr=0x87000000\0"
+
+ #define NFS_BOOTCMD \
+ "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
+ "nfsboot=run setup; " \
+ "setenv bootargs ${defargs} ${nfsargs} " \
+ "${setupargs} ${vidargs}; echo Booting from NFS...;" \
+ "dhcp ${kernel_addr_r} && " \
+ "tftp ${fdt_addr_r} " FDT_FILE " && " \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+ #define SD_BOOTCMD \
+ "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
+ "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+ "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
+ "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
+ "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+ #define UBI_BOOTCMD \
+ "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
+ "ubi.fm_autoconvert=1\0" \
+ "ubiboot=run setup; " \
+ "setenv bootargs ${defargs} ${ubiargs} " \
+ "${setupargs} ${vidargs}; echo Booting from NAND...; " \
+ "ubi part ubi &&" \
+ "ubi read ${kernel_addr_r} kernel && " \
+ "ubi read ${fdt_addr_r} dtb && " \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+ #define CONFIG_BOOTCOMMAND "run ubiboot; " \
+ "setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
+
+ #define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(DHCP, dhcp, na)
+ #include <config_distro_bootcmd.h>
+
+ #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ NFS_BOOTCMD \
+ SD_BOOTCMD \
+ UBI_BOOTCMD \
+ "console=ttymxc0\0" \
+ "defargs=user_debug=30\0" \
+ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+ "fdt_board=eval-v3\0" \
+ "fdt_fixup=;\0" \
+ "ip_dyn=yes\0" \
+ "kernel_file=zImage\0" \
-/* Dynamic MTD partition support */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define MTDIDS_DEFAULT "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
- "512k(mx6ull-bcb)," \
- "1536k(u-boot1)ro," \
- "1536k(u-boot2)ro," \
- "512k(u-boot-env)," \
- "-(ubi)"
-
++ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+ "${board}/flash_eth.img && source ${loadaddr}\0" \
+ "setsdupdate=mmc rescan && setenv interface mmc && " \
+ "fatload ${interface} 0:1 ${loadaddr} " \
+ "${board}/flash_blk.img && source ${loadaddr}\0" \
+ "setup=setenv setupargs " \
+ "console=tty1 console=${console}" \
+ ",${baudrate}n8 ${memargs} consoleblank=0\0" \
+ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+ "setusbupdate=usb start && setenv interface usb && " \
+ "fatload ${interface} 0:1 ${loadaddr} " \
+ "${board}/flash_blk.img && source ${loadaddr}\0" \
+ "splashpos=m,m\0" \
+ "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
+ "vidargs=video=mxsfb:640x480-16@60"
+
+ #define CONFIG_SYS_MEMTEST_START 0x80000000
+ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000)
+
+ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+ /* Physical Memory Map */
+ #define CONFIG_NR_DRAM_BANKS 1
+ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+ #define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+ #define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+ #if defined(CONFIG_ENV_IS_IN_NAND)
+ #define CONFIG_ENV_SECT_SIZE (128 * 1024)
+ #define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE)
+ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+ #endif
+
+ /* NAND stuff */
+ #define CONFIG_SYS_MAX_NAND_DEVICE 1
+ /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
+ #define CONFIG_SYS_NAND_BASE -1
+ #define CONFIG_SYS_NAND_ONFI_DETECTION
+ #define CONFIG_SYS_NAND_USE_FLASH_BBT
+
+ /* USB Configs */
+ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+ #define CONFIG_MXC_USB_FLAGS 0
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+ #define CONFIG_IMX_THERMAL
+
+ #define CONFIG_USBD_HS
+
+ /* USB Device Firmware Update support */
+ #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
+ #define DFU_DEFAULT_POLL_TIMEOUT 300
+
+ #ifdef CONFIG_VIDEO
+ #define CONFIG_VIDEO_MXS
+ #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
+ #define CONFIG_VIDEO_LOGO
+ #define CONFIG_SPLASH_SCREEN
+ #define CONFIG_SPLASH_SCREEN_ALIGN
+ #define CONFIG_BMP_16BPP
+ #define CONFIG_VIDEO_BMP_RLE8
+ #define CONFIG_VIDEO_BMP_LOGO
+ #endif
+
+ #endif
projects / oweals / u-boot.git / commitdiff