usb: dwc2: correctly program hcchar for LS devices

A bit must be set in HCCHAR when communicating with low-speed devices.
I have no idea why there's no corresponding bit to distinguish between
full-speed and high-speed devices, but no matter; they all work now!

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index b506ff23ed387837a92ed909b13d5db06bb2181f..b1d94ccc1a693ab41505f9d75fdb976eb58fa38f 100644 (file)
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -398,15 +398,18 @@ static void dwc_otg_core_init(struct dwc2_core_regs *regs)
  * @param hc Information needed to initialize the host channel
  */
 static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num,
-               uint8_t dev_addr, uint8_t ep_num, uint8_t ep_is_in,
-               uint8_t ep_type, uint16_t max_packet)
+               struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
+               uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet)
 {
        struct dwc2_hc_regs *hc_regs = &regs->hc_regs[hc_num];
-       const uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
-                               (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
-                               (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
-                               (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
-                               (max_packet << DWC2_HCCHAR_MPS_OFFSET);
+       uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
+                         (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
+                         (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
+                         (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
+                         (max_packet << DWC2_HCCHAR_MPS_OFFSET);
+
+       if (dev->speed == USB_SPEED_LOW)
+               hcchar |= DWC2_HCCHAR_LSPDDEV;
 
        /* Clear old interrupt conditions for this host channel. */
        writel(0x3fff, &hc_regs->hcint);
@@ -766,8 +769,8 @@ int chunk_msg(struct usb_device *dev, unsigned long pipe, int *pid, int in,
 
        do {
                /* Initialize channel */
-               dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, in, eptype,
-                               max);
+               dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, dev, devnum, ep, in,
+                               eptype, max);
 
                xfer_len = len - done;
                if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE)