--- /dev/null
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# SHA1 for ARMv8.
+#
+# Performance in cycles per processed byte and improvement coefficient
+# over code generated with "default" compiler:
+#
+# hardware-assisted software(*)
+# Apple A7 2.31 4.13 (+14%)
+# Cortex-A5x n/a n/a
+#
+# (*) Software results are presented mostly for reference purposes.
+
+$flavour = shift;
+open STDOUT,">".shift;
+
+($ctx,$inp,$num)=("x0","x1","x2");
+@Xw=map("w$_",(3..17,19));
+@Xx=map("x$_",(3..17,19));
+@V=($A,$B,$C,$D,$E)=map("w$_",(20..24));
+($t0,$t1,$t2,$K)=map("w$_",(25..28));
+
+
+sub BODY_00_19 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=($i+2)&15;
+
+$code.=<<___ if ($i<15 && !($i&1));
+ lsr @Xx[$i+1],@Xx[$i],#32
+___
+$code.=<<___ if ($i<14 && !($i&1));
+ ldr @Xx[$i+2],[$inp,#`($i+2)*4-64`]
+___
+$code.=<<___ if ($i<14 && ($i&1));
+#ifdef __ARMEB__
+ ror @Xx[$i+1],@Xx[$i+1],#32
+#else
+ rev32 @Xx[$i+1],@Xx[$i+1]
+#endif
+___
+$code.=<<___ if ($i<14);
+ bic $t0,$d,$b
+ and $t1,$c,$b
+ ror $t2,$a,#27
+ add $d,$d,$K // future e+=K
+ orr $t0,$t0,$t1
+ add $e,$e,$t2 // e+=rot(a,5)
+ ror $b,$b,#2
+ add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
+ add $e,$e,$t0 // e+=F(b,c,d)
+___
+$code.=<<___ if ($i==19);
+ movz $K,#0xeba1
+ movk $K,#0x6ed9,lsl#16
+___
+$code.=<<___ if ($i>=14);
+ eor @Xw[$j],@Xw[$j],@Xw[($j+2)&15]
+ bic $t0,$d,$b
+ and $t1,$c,$b
+ ror $t2,$a,#27
+ eor @Xw[$j],@Xw[$j],@Xw[($j+8)&15]
+ add $d,$d,$K // future e+=K
+ orr $t0,$t0,$t1
+ add $e,$e,$t2 // e+=rot(a,5)
+ eor @Xw[$j],@Xw[$j],@Xw[($j+13)&15]
+ ror $b,$b,#2
+ add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
+ add $e,$e,$t0 // e+=F(b,c,d)
+ ror @Xw[$j],@Xw[$j],#31
+___
+}
+
+sub BODY_40_59 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=($i+2)&15;
+
+$code.=<<___ if ($i==59);
+ movz $K,#0xc1d6
+ movk $K,#0xca62,lsl#16
+___
+$code.=<<___;
+ orr $t0,$b,$c
+ and $t1,$b,$c
+ eor @Xw[$j],@Xw[$j],@Xw[($j+2)&15]
+ ror $t2,$a,#27
+ and $t0,$t0,$d
+ add $d,$d,$K // future e+=K
+ eor @Xw[$j],@Xw[$j],@Xw[($j+8)&15]
+ add $e,$e,$t2 // e+=rot(a,5)
+ orr $t0,$t0,$t1
+ ror $b,$b,#2
+ eor @Xw[$j],@Xw[$j],@Xw[($j+13)&15]
+ add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
+ add $e,$e,$t0 // e+=F(b,c,d)
+ ror @Xw[$j],@Xw[$j],#31
+___
+}
+
+sub BODY_20_39 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=($i+2)&15;
+
+$code.=<<___ if ($i==39);
+ movz $K,#0xbcdc
+ movk $K,#0x8f1b,lsl#16
+___
+$code.=<<___ if ($i<78);
+ eor @Xw[$j],@Xw[$j],@Xw[($j+2)&15]
+ eor $t0,$d,$b
+ ror $t2,$a,#27
+ add $d,$d,$K // future e+=K
+ eor @Xw[$j],@Xw[$j],@Xw[($j+8)&15]
+ eor $t0,$t0,$c
+ add $e,$e,$t2 // e+=rot(a,5)
+ ror $b,$b,#2
+ eor @Xw[$j],@Xw[$j],@Xw[($j+13)&15]
+ add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
+ add $e,$e,$t0 // e+=F(b,c,d)
+ ror @Xw[$j],@Xw[$j],#31
+___
+$code.=<<___ if ($i==78);
+ ldp @Xw[1],@Xw[2],[$ctx]
+ eor $t0,$d,$b
+ ror $t2,$a,#27
+ add $d,$d,$K // future e+=K
+ eor $t0,$t0,$c
+ add $e,$e,$t2 // e+=rot(a,5)
+ ror $b,$b,#2
+ add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
+ add $e,$e,$t0 // e+=F(b,c,d)
+___
+$code.=<<___ if ($i==79);
+ ldp @Xw[3],@Xw[4],[$ctx,#8]
+ eor $t0,$d,$b
+ ror $t2,$a,#27
+ eor $t0,$t0,$c
+ add $e,$e,$t2 // e+=rot(a,5)
+ ror $b,$b,#2
+ ldr @Xw[5],[$ctx,#16]
+ add $e,$e,$t0 // e+=F(b,c,d)
+___
+}
+
+$code.=<<___;
+#include "arm_arch.h"
+
+.text
+
+.globl sha1_block_data_order
+.type sha1_block_data_order,%function
+.align 6
+sha1_block_data_order:
+ ldr x16,.LOPENSSL_armcap_P
+ adr x17,.LOPENSSL_armcap_P
+ add x16,x16,x17
+ ldr w16,[x16]
+ tst w16,#ARMV8_SHA1
+ b.ne .Lv8_entry
+
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+
+ ldp $A,$B,[$ctx]
+ ldp $C,$D,[$ctx,#8]
+ ldr $E,[$ctx,#16]
+
+.Loop:
+ ldr @Xx[0],[$inp],#64
+ movz $K,#0x7999
+ sub $num,$num,#1
+ movk $K,#0x5a82,lsl#16
+#ifdef __ARMEB__
+ ror $Xx[0],@Xx[0],#32
+#else
+ rev32 @Xx[0],@Xx[0]
+#endif
+ add $E,$E,$K // warm it up
+ add $E,$E,@Xw[0]
+___
+for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
+for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
+for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ add $B,$B,@Xw[2]
+ add $C,$C,@Xw[3]
+ add $A,$A,@Xw[1]
+ add $D,$D,@Xw[4]
+ add $E,$E,@Xw[5]
+ stp $A,$B,[$ctx]
+ stp $C,$D,[$ctx,#8]
+ str $E,[$ctx,#16]
+ cbnz $num,.Loop
+
+ ldp x19,x20,[sp,#16]
+ ldp x21,x22,[sp,#32]
+ ldp x23,x24,[sp,#48]
+ ldp x25,x26,[sp,#64]
+ ldp x27,x28,[sp,#80]
+ ldr x29,[sp],#96
+ ret
+.size sha1_block_data_order,.-sha1_block_data_order
+___
+{{{
+my ($ABCD,$E,$E0,$E1)=map("v$_.16b",(0..3));
+my @MSG=map("v$_.16b",(4..7));
+my @Kxx=map("v$_.4s",(16..19));
+my ($W0,$W1)=("v20.4s","v21.4s");
+my $ABCD_SAVE="v22.16b";
+
+$code.=<<___;
+.type sha1_block_armv8,%function
+.align 6
+sha1_block_armv8:
+.Lv8_entry:
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+
+ adr x4,.Lconst
+ eor $E,$E,$E
+ ld1.32 {$ABCD},[$ctx],#16
+ ld1.32 {$E}[0],[$ctx]
+ sub $ctx,$ctx,#16
+ ld1.32 {@Kxx[0]-@Kxx[3]},[x4]
+
+.Loop_hw:
+ ld1 {@MSG[0]-@MSG[3]},[$inp],#64
+ sub $num,$num,#1
+ rev32 @MSG[0],@MSG[0]
+ rev32 @MSG[1],@MSG[1]
+
+ add.i32 $W0,@Kxx[0],@MSG[0]
+ rev32 @MSG[2],@MSG[2]
+ orr $ABCD_SAVE,$ABCD,$ABCD // offload
+
+ add.i32 $W1,@Kxx[0],@MSG[1]
+ rev32 @MSG[3],@MSG[3]
+ sha1h $E1,$ABCD
+ sha1c $ABCD,$E,$W0 // 0
+ add.i32 $W0,@Kxx[$j],@MSG[2]
+ sha1su0 @MSG[0],@MSG[1],@MSG[2]
+___
+for ($j=0,$i=1;$i<20-3;$i++) {
+my $f=("c","p","m","p")[$i/5];
+$code.=<<___;
+ sha1h $E0,$ABCD // $i
+ sha1$f $ABCD,$E1,$W1
+ add.i32 $W1,@Kxx[$j],@MSG[3]
+ sha1su1 @MSG[0],@MSG[3]
+___
+$code.=<<___ if ($i<20-4);
+ sha1su0 @MSG[1],@MSG[2],@MSG[3]
+___
+ ($E0,$E1)=($E1,$E0); ($W0,$W1)=($W1,$W0);
+ push(@MSG,shift(@MSG)); $j++ if ((($i+3)%5)==0);
+}
+$code.=<<___;
+ sha1h $E0,$ABCD // $i
+ sha1p $ABCD,$E1,$W1
+ add.i32 $W1,@Kxx[$j],@MSG[3]
+
+ sha1h $E1,$ABCD // 18
+ sha1p $ABCD,$E0,$W0
+
+ sha1h $E0,$ABCD // 19
+ sha1p $ABCD,$E1,$W1
+
+ add.i32 $E,$E,$E0
+ add.i32 $ABCD,$ABCD,$ABCD_SAVE
+
+ cbnz $num,.Loop_hw
+
+ st1.32 {$ABCD},[$ctx],#16
+ st1.32 {$E}[0],[$ctx]
+
+ ldr x29,[sp],#16
+ ret
+.size sha1_block_armv8,.-sha1_block_armv8
+.align 6
+.Lconst:
+.long 0x5a827999,0x5a827999,0x5a827999,0x5a827999 //K_00_19
+.long 0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1 //K_20_39
+.long 0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc //K_40_59
+.long 0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6 //K_60_79
+.LOPENSSL_armcap_P:
+.quad OPENSSL_armcap_P-.
+.asciz "SHA1 block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.align 2
+.comm OPENSSL_armcap_P,4,4
+___
+}}}
+
+{ my %opcode = (
+ "sha1c" => 0x5e000000, "sha1p" => 0x5e001000,
+ "sha1m" => 0x5e002000, "sha1su0" => 0x5e003000,
+ "sha1h" => 0x5e280800, "sha1su1" => 0x5e281800 );
+
+ sub unsha1 {
+ my ($mnemonic,$arg)=@_;
+
+ $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
+ &&
+ sprintf ".long\t0x%08x\t//%s %s",
+ $opcode{$mnemonic}|$1|($2<<5)|($3<<16),
+ $mnemonic,$arg;
+ }
+}
+
+foreach(split("\n",$code)) {
+
+ s/\`([^\`]*)\`/eval($1)/geo;
+
+ s/\b(sha1\w+)\s+([qv].*)/unsha1($1,$2)/geo;
+
+ s/\.\w?32\b//o and s/\.16b/\.4s/go;
+ m/(ld|st)1[^\[]+\[0\]/o and s/\.4s/\.s/go;
+
+ print $_,"\n";
+}
+
+close STDOUT;
--- /dev/null
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# SHA256/512 for ARMv8.
+#
+# Performance in cycles per processed byte and improvement coefficient
+# over code generated with "default" compiler:
+#
+# SHA256-hw SHA256(*) SHA512
+# Apple A7 1.97 10.5 (+33%) 6.73 (-1%(**))
+# Cortex-A5x n/a n/a n/a
+#
+# (*) Software SHA256 results are of lesser relevance, presented
+# mostly for informational purposes.
+# (**) The result is a trade-off: it's possible to improve it by
+# 10%, but at the cost of 20% loss on Cortex-A5x.
+
+$flavour=shift;
+$output=shift;
+open STDOUT,">$output";
+
+if ($output =~ /512/) {
+ $BITS=512;
+ $SZ=8;
+ @Sigma0=(28,34,39);
+ @Sigma1=(14,18,41);
+ @sigma0=(1, 8, 7);
+ @sigma1=(19,61, 6);
+ $rounds=80;
+ $reg_t="x";
+} else {
+ $BITS=256;
+ $SZ=4;
+ @Sigma0=( 2,13,22);
+ @Sigma1=( 6,11,25);
+ @sigma0=( 7,18, 3);
+ @sigma1=(17,19,10);
+ $rounds=64;
+ $reg_t="w";
+}
+
+$func="sha${BITS}_block_data_order";
+
+($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
+
+@X=map("$reg_t$_",(3..15,0..2));
+@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27));
+($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28));
+
+sub BODY_00_xx {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+my $j=($i+1)&15;
+my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]);
+ $T0=@X[$i+3] if ($i<11);
+
+$code.=<<___ if ($i<16);
+#ifndef __ARMEB__
+ rev @X[$i],@X[$i] // $i
+#endif
+___
+$code.=<<___ if ($i<13 && ($i&1));
+ ldp @X[$i+1],@X[$i+2],[$inp],#2*$SZ
+___
+$code.=<<___ if ($i==13);
+ ldp @X[14],@X[15],[$inp]
+___
+$code.=<<___ if ($i>=14);
+ ldr @X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`]
+___
+$code.=<<___ if ($i>0 && $i<16);
+ add $a,$a,$t1 // h+=Sigma0(a)
+___
+$code.=<<___ if ($i>=11);
+ str @X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`]
+___
+# While ARMv8 specifies merged rotate-n-logical operation such as
+# 'eor x,y,z,ror#n', it was found to negatively affect performance
+# on Apple A7. The reason seems to be that it requires even 'y' to
+# be available earlier. This means that such merged instruction is
+# not necessarily best choice on critical path... On the other hand
+# Cortex-A5x handles merged instructions much better than disjoint
+# rotate and logical... See (**) footnote above.
+$code.=<<___ if ($i<15);
+ ror $t0,$e,#$Sigma1[0]
+ add $h,$h,$t2 // h+=K[i]
+ eor $T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]`
+ and $t1,$f,$e
+ bic $t2,$g,$e
+ add $h,$h,@X[$i&15] // h+=X[i]
+ orr $t1,$t1,$t2 // Ch(e,f,g)
+ eor $t2,$a,$b // a^b, b^c in next round
+ eor $t0,$t0,$T0,ror#$Sigma1[1] // Sigma1(e)
+ ror $T0,$a,#$Sigma0[0]
+ add $h,$h,$t1 // h+=Ch(e,f,g)
+ eor $t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]`
+ add $h,$h,$t0 // h+=Sigma1(e)
+ and $t3,$t3,$t2 // (b^c)&=(a^b)
+ add $d,$d,$h // d+=h
+ eor $t3,$t3,$b // Maj(a,b,c)
+ eor $t1,$T0,$t1,ror#$Sigma0[1] // Sigma0(a)
+ add $h,$h,$t3 // h+=Maj(a,b,c)
+ ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round
+ //add $h,$h,$t1 // h+=Sigma0(a)
+___
+$code.=<<___ if ($i>=15);
+ ror $t0,$e,#$Sigma1[0]
+ add $h,$h,$t2 // h+=K[i]
+ ror $T1,@X[($j+1)&15],#$sigma0[0]
+ and $t1,$f,$e
+ ror $T2,@X[($j+14)&15],#$sigma1[0]
+ bic $t2,$g,$e
+ ror $T0,$a,#$Sigma0[0]
+ add $h,$h,@X[$i&15] // h+=X[i]
+ eor $t0,$t0,$e,ror#$Sigma1[1]
+ eor $T1,$T1,@X[($j+1)&15],ror#$sigma0[1]
+ orr $t1,$t1,$t2 // Ch(e,f,g)
+ eor $t2,$a,$b // a^b, b^c in next round
+ eor $t0,$t0,$e,ror#$Sigma1[2] // Sigma1(e)
+ eor $T0,$T0,$a,ror#$Sigma0[1]
+ add $h,$h,$t1 // h+=Ch(e,f,g)
+ and $t3,$t3,$t2 // (b^c)&=(a^b)
+ eor $T2,$T2,@X[($j+14)&15],ror#$sigma1[1]
+ eor $T1,$T1,@X[($j+1)&15],lsr#$sigma0[2] // sigma0(X[i+1])
+ add $h,$h,$t0 // h+=Sigma1(e)
+ eor $t3,$t3,$b // Maj(a,b,c)
+ eor $t1,$T0,$a,ror#$Sigma0[2] // Sigma0(a)
+ eor $T2,$T2,@X[($j+14)&15],lsr#$sigma1[2] // sigma1(X[i+14])
+ add @X[$j],@X[$j],@X[($j+9)&15]
+ add $d,$d,$h // d+=h
+ add $h,$h,$t3 // h+=Maj(a,b,c)
+ ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round
+ add @X[$j],@X[$j],$T1
+ add $h,$h,$t1 // h+=Sigma0(a)
+ add @X[$j],@X[$j],$T2
+___
+ ($t2,$t3)=($t3,$t2);
+}
+
+$code.=<<___;
+#include "arm_arch.h"
+
+.text
+
+.globl $func
+.type $func,%function
+.align 6
+$func:
+___
+$code.=<<___ if ($SZ==4);
+ ldr x16,.LOPENSSL_armcap_P
+ adr x17,.LOPENSSL_armcap_P
+ add x16,x16,x17
+ ldr w16,[x16]
+ tst w16,#ARMV8_SHA256
+ b.ne .Lv8_entry
+___
+$code.=<<___;
+ stp x29,x30,[sp,#-128]!
+ add x29,sp,#0
+
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+ sub sp,sp,#4*$SZ
+
+ ldp $A,$B,[$ctx] // load context
+ ldp $C,$D,[$ctx,#2*$SZ]
+ ldp $E,$F,[$ctx,#4*$SZ]
+ add $num,$inp,$num,lsl#`log(16*$SZ)/log(2)` // end of input
+ ldp $G,$H,[$ctx,#6*$SZ]
+ adr $Ktbl,K$BITS
+ stp $ctx,$num,[x29,#96]
+
+.Loop:
+ ldp @X[0],@X[1],[$inp],#2*$SZ
+ ldr $t2,[$Ktbl],#$SZ // *K++
+ eor $t3,$B,$C // magic seed
+ str $inp,[x29,#112]
+___
+for ($i=0;$i<16;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
+$code.=".Loop_16_xx:\n";
+for (;$i<32;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ cbnz $t2,.Loop_16_xx
+
+ ldp $ctx,$num,[x29,#96]
+ ldr $inp,[x29,#112]
+ sub $Ktbl,$Ktbl,#`$SZ*($rounds+1)` // rewind
+
+ ldp @X[0],@X[1],[$ctx]
+ ldp @X[2],@X[3],[$ctx,#2*$SZ]
+ add $inp,$inp,#14*$SZ // advance input pointer
+ ldp @X[4],@X[5],[$ctx,#4*$SZ]
+ add $A,$A,@X[0]
+ ldp @X[6],@X[7],[$ctx,#6*$SZ]
+ add $B,$B,@X[1]
+ add $C,$C,@X[2]
+ add $D,$D,@X[3]
+ stp $A,$B,[$ctx]
+ add $E,$E,@X[4]
+ add $F,$F,@X[5]
+ stp $C,$D,[$ctx,#2*$SZ]
+ add $G,$G,@X[6]
+ add $H,$H,@X[7]
+ cmp $inp,$num
+ stp $E,$F,[$ctx,#4*$SZ]
+ stp $G,$H,[$ctx,#6*$SZ]
+ b.ne .Loop
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#4*$SZ
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#128
+ ret
+.size $func,.-$func
+
+.align 6
+.type K$BITS,%object
+K$BITS:
+___
+$code.=<<___ if ($SZ==8);
+ .quad 0x428a2f98d728ae22,0x7137449123ef65cd
+ .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
+ .quad 0x3956c25bf348b538,0x59f111f1b605d019
+ .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118
+ .quad 0xd807aa98a3030242,0x12835b0145706fbe
+ .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
+ .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1
+ .quad 0x9bdc06a725c71235,0xc19bf174cf692694
+ .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3
+ .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
+ .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483
+ .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5
+ .quad 0x983e5152ee66dfab,0xa831c66d2db43210
+ .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4
+ .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725
+ .quad 0x06ca6351e003826f,0x142929670a0e6e70
+ .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926
+ .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df
+ .quad 0x650a73548baf63de,0x766a0abb3c77b2a8
+ .quad 0x81c2c92e47edaee6,0x92722c851482353b
+ .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001
+ .quad 0xc24b8b70d0f89791,0xc76c51a30654be30
+ .quad 0xd192e819d6ef5218,0xd69906245565a910
+ .quad 0xf40e35855771202a,0x106aa07032bbd1b8
+ .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53
+ .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
+ .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
+ .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
+ .quad 0x748f82ee5defb2fc,0x78a5636f43172f60
+ .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec
+ .quad 0x90befffa23631e28,0xa4506cebde82bde9
+ .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b
+ .quad 0xca273eceea26619c,0xd186b8c721c0c207
+ .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
+ .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6
+ .quad 0x113f9804bef90dae,0x1b710b35131c471b
+ .quad 0x28db77f523047d84,0x32caab7b40c72493
+ .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
+ .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a
+ .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817
+ .quad 0 // terminator
+___
+$code.=<<___ if ($SZ==4);
+ .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
+ .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
+ .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
+ .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
+ .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
+ .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
+ .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
+ .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
+ .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
+ .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
+ .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
+ .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070
+ .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
+ .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
+ .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
+ .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
+ .long 0 //terminator
+___
+$code.=<<___;
+.size K$BITS,.-K$BITS
+.align 3
+.LOPENSSL_armcap_P:
+ .quad OPENSSL_armcap_P-.
+.asciz "SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.align 2
+___
+
+if ($SZ==4) {
+my $Ktbl="x3";
+
+my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2));
+my @MSG=map("v$_.16b",(4..7));
+my ($W0,$W1)=("v16.4s","v17.4s");
+my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
+
+$code.=<<___;
+.type sha256_block_armv8,%function
+.align 6
+sha256_block_armv8:
+.Lv8_entry:
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+
+ ld1.32 {$ABCD,$EFGH},[$ctx]
+ adr $Ktbl,K256
+
+.Loop_hw:
+ ld1 {@MSG[0]-@MSG[3]},[$inp],#64
+ sub $num,$num,#1
+ ld1.32 {$W0},[$Ktbl],#16
+ rev32 @MSG[0],@MSG[0]
+ rev32 @MSG[1],@MSG[1]
+ rev32 @MSG[2],@MSG[2]
+ rev32 @MSG[3],@MSG[3]
+ orr $ABCD_SAVE,$ABCD,$ABCD // offload
+ orr $EFGH_SAVE,$EFGH,$EFGH
+___
+for($i=0;$i<12;$i++) {
+$code.=<<___;
+ ld1.32 {$W1},[$Ktbl],#16
+ add.i32 $W0,$W0,@MSG[0]
+ sha256su0 @MSG[0],@MSG[1]
+ orr $abcd,$ABCD,$ABCD
+ sha256h $ABCD,$EFGH,$W0
+ sha256h2 $EFGH,$abcd,$W0
+ sha256su1 @MSG[0],@MSG[2],@MSG[3]
+___
+ ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
+}
+$code.=<<___;
+ ld1.32 {$W1},[$Ktbl],#16
+ add.i32 $W0,$W0,@MSG[0]
+ orr $abcd,$ABCD,$ABCD
+ sha256h $ABCD,$EFGH,$W0
+ sha256h2 $EFGH,$abcd,$W0
+
+ ld1.32 {$W0},[$Ktbl],#16
+ add.i32 $W1,$W1,@MSG[1]
+ orr $abcd,$ABCD,$ABCD
+ sha256h $ABCD,$EFGH,$W1
+ sha256h2 $EFGH,$abcd,$W1
+
+ ld1.32 {$W1},[$Ktbl]
+ add.i32 $W0,$W0,@MSG[2]
+ sub $Ktbl,$Ktbl,#$rounds*$SZ-16 // rewind
+ orr $abcd,$ABCD,$ABCD
+ sha256h $ABCD,$EFGH,$W0
+ sha256h2 $EFGH,$abcd,$W0
+
+ add.i32 $W1,$W1,@MSG[3]
+ orr $abcd,$ABCD,$ABCD
+ sha256h $ABCD,$EFGH,$W1
+ sha256h2 $EFGH,$abcd,$W1
+
+ add.i32 $ABCD,$ABCD,$ABCD_SAVE
+ add.i32 $EFGH,$EFGH,$EFGH_SAVE
+
+ cbnz $num,.Loop_hw
+
+ st1.32 {$ABCD,$EFGH},[$ctx]
+
+ ldr x29,[sp],#16
+ ret
+.size sha256_block_armv8,.-sha256_block_armv8
+___
+}
+
+$code.=<<___;
+.comm OPENSSL_armcap_P,4,4
+___
+
+{ my %opcode = (
+ "sha256h" => 0x5e004000, "sha256h2" => 0x5e005000,
+ "sha256su0" => 0x5e282800, "sha256su1" => 0x5e006000 );
+
+ sub unsha256 {
+ my ($mnemonic,$arg)=@_;
+
+ $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
+ &&
+ sprintf ".long\t0x%08x\t//%s %s",
+ $opcode{$mnemonic}|$1|($2<<5)|($3<<16),
+ $mnemonic,$arg;
+ }
+}
+
+foreach(split("\n",$code)) {
+
+ s/\`([^\`]*)\`/eval($1)/geo;
+
+ s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/geo;
+
+ s/\.\w?32\b//o and s/\.16b/\.4s/go;
+ m/(ld|st)1[^\[]+\[0\]/o and s/\.4s/\.s/go;
+
+ print $_,"\n";
+}
+
+close STDOUT;
projects / oweals / openssl.git / commitdiff