Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to Kconfig
authorTom Rini <trini@konsulko.com>
Tue, 26 Nov 2019 22:32:43 +0000 (17:32 -0500)
committerTom Rini <trini@konsulko.com>
Tue, 3 Dec 2019 13:43:24 +0000 (08:43 -0500)
This converts the following to Kconfig:
   CONFIG_SYS_CORTINA_FW_IN_MMC
   CONFIG_SYS_CORTINA_FW_IN_NAND
   CONFIG_SYS_CORTINA_FW_IN_NOR
   CONFIG_SYS_CORTINA_FW_IN_REMOTE
   CONFIG_SYS_CORTINA_FW_IN_SPIFLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
configs/T2080RDB_NAND_defconfig
configs/T2080RDB_SDCARD_defconfig
configs/T2080RDB_SPIFLASH_defconfig
configs/T2080RDB_SRIO_PCIE_BOOT_defconfig
drivers/net/phy/Kconfig
include/configs/T208xRDB.h
include/configs/T4240RDB.h
include/configs/ls2080ardb.h
scripts/config_whitelist.txt

index bed4fed2d676a2a3a3549209f1c8cc141acfad6d..8c6a8e1c302db4b1c5b649b9f6c66407bc3ac98a 100644 (file)
@@ -63,6 +63,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_NAND=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y
index 84e1a94c6c0da3b58e6cf5d324210b1fe8763c51..4a0eac086f8acc6e44b0f1684b7e0a39b9e9e946 100644 (file)
@@ -60,6 +60,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_MMC=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y
index 10c5cbecc182bb844b741b073bd01aa1fa22d518..4ea7379cc1e9a7cc5dee873a4c89c1e3669e7dec 100644 (file)
@@ -63,6 +63,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_SPIFLASH=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y
index 838d12515dcb95bb19df48e4187477c5b902c6fd..8f6a5ced22460376893529bcc432e8b2e9c5097d 100644 (file)
@@ -36,6 +36,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_REMOTE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y
index 30bd8e7653040372494ee325e4f530e1e28430cb..bcea8a0c3e6c58504e2b9bbd5cd772e3f335337e 100644 (file)
@@ -100,6 +100,28 @@ config PHY_BROADCOM
 config PHY_CORTINA
        bool "Cortina Ethernet PHYs support"
 
+choice
+       prompt "Location of the Cortina firmware"
+       default SYS_CORTINA_FW_IN_NOR
+       depends on PHY_CORTINA
+
+config SYS_CORTINA_FW_IN_MMC
+       bool "Cortina firmware in MMC"
+
+config SYS_CORTINA_FW_IN_NAND
+       bool "Cortina firmware in NAND flash"
+
+config SYS_CORTINA_FW_IN_NOR
+       bool "Cortina firmware in NOR flash"
+
+config SYS_CORTINA_FW_IN_REMOTE
+       bool "Cortina firmware in remote device"
+
+config SYS_CORTINA_FW_IN_SPIFLASH
+       bool "Cortina firmware in SPI flash"
+
+endchoice
+
 config PHY_DAVICOM
        bool "Davicom Ethernet PHYs support"
 
index 748a7a0afe0be7920420a5dc818c1110f485bd0b..8c0b81adfd114cf36a4058fc14098f8d2b6d9618 100644 (file)
@@ -502,7 +502,6 @@ unsigned long get_board_ddr_clk(void);
  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
  * env, so we got 0x110000.
  */
-#define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR                0x110000
 #define CONFIG_CORTINA_FW_ADDR         0x120000
 
@@ -512,12 +511,10 @@ unsigned long get_board_ddr_clk(void);
  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
-#define CONFIG_SYS_CORTINA_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
 #define CONFIG_CORTINA_FW_ADDR         (512 * 0x8a0)
 
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_CORTINA_FW_IN_NAND
 #define CONFIG_SYS_FMAN_FW_ADDR                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_CORTINA_FW_ADDR         (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
@@ -528,11 +525,9 @@ unsigned long get_board_ddr_clk(void);
  * slave SRIO or PCIE outbound window->master inbound window->
  * master LAW->the ucode address in master's memory space.
  */
-#define CONFIG_SYS_CORTINA_FW_IN_REMOTE
 #define CONFIG_SYS_FMAN_FW_ADDR                0xFFE00000
 #define CONFIG_CORTINA_FW_ADDR         0xFFE10000
 #else
-#define CONFIG_SYS_CORTINA_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #define CONFIG_CORTINA_FW_ADDR         0xEFE00000
 #endif
index bbb4ca9b906b354ed870e62cf36c0d771d843eb4..493da70f669e5459b0892913701e2cf19d7f3020 100644 (file)
@@ -548,7 +548,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_VITESSE
-#define CONFIG_SYS_CORTINA_FW_IN_NOR
 #define CONFIG_CORTINA_FW_ADDR         0xefe00000
 #define CONFIG_CORTINA_FW_LENGTH       0x40000
 #define CONFIG_PHY_TERANETICS
index 02f6cd43d3b1c6ea057994e7ca4eef5a99e98260..926239a58834b549d094f46e4dc3ab6722c3221c 100644 (file)
@@ -560,7 +560,6 @@ unsigned long get_board_sys_clk(void);
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
-#define        CONFIG_SYS_CORTINA_FW_IN_NOR
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_CORTINA_FW_ADDR         0x20980000
 #else
index f3ed80e6c4e350fa85a84cd1187c4308dc067f87..73dd48cbda2780cd9020c83f991492b332905168 100644 (file)
@@ -1918,11 +1918,6 @@ CONFIG_SYS_CMXFCR_VALUE2
 CONFIG_SYS_CMXFCR_VALUE3
 CONFIG_SYS_CORE_SRAM
 CONFIG_SYS_CORE_SRAM_SIZE
-CONFIG_SYS_CORTINA_FW_IN_MMC
-CONFIG_SYS_CORTINA_FW_IN_NAND
-CONFIG_SYS_CORTINA_FW_IN_NOR
-CONFIG_SYS_CORTINA_FW_IN_REMOTE
-CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 CONFIG_SYS_CPC_REINIT_F
 CONFIG_SYS_CPLD_AMASK
 CONFIG_SYS_CPLD_BASE