Add CMD_GPIO to Kconfig and run tools/moveconfig.py .
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
depends on REMOTEPROC
help
Support for Remote Processor control
+
+config CMD_GPIO
+ bool "gpio"
+ help
+ GPIO support.
+
endmenu
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_SUNXI_NO_PMIC=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_NETCONSOLE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DCDC2_VOLT=1300
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_ALDO1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB0_ID_DET="PH19"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_CYRUS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5020"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_CYRUS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5040"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MPC83xx=y
CONFIG_TARGET_MPC8313ERDB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MPC83xx=y
CONFIG_TARGET_MPC8313ERDB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_TARGET_MPC8313ERDB=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_TARGET_MPC8313ERDB=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO4_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO4_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO4_VOLT=3300
-CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP_DLDO1_VOLT=3000
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_AXP_ALDO2_VOLT=1800
+CONFIG_AXP_DLDO1_VOLT=3000
CONFIG_USB_EHCI_HCD=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc>\" to stop\n"
CONFIG_AUTOBOOT_STOP_STR="\x1b"
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc>\" to stop\n"
CONFIG_AUTOBOOT_STOP_STR="\x1b"
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_BALTOS=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DFU_TFTP=y
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
+CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
-CONFIG_DM_MMC=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_NOR=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="NAND"
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_NOR=y
CONFIG_NOR_BOOT=y
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
+CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
-CONFIG_RSA=y
CONFIG_DM_ETH=y
-CONFIG_DM_MMC=y
+CONFIG_RSA=y
CONFIG_ARM=y
CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_ARM=y
CONFIG_TARGET_AM335X_SL50=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_ARM=y
CONFIG_TARGET_AM43XX_EVM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
-CONFIG_SPL_DISABLE_OF_CONTROL=y
CONFIG_DM=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
CONFIG_DM_MMC=y
+CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_TARGET_AM43XX_EVM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am437x-sk-evm"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
-CONFIG_SPL_DISABLE_OF_CONTROL=y
CONFIG_DM=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
CONFIG_DM_MMC=y
+CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_BEAGLE_X15=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
+CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_DM_MMC=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SPL=y
CONFIG_SYS_PROMPT="ARNDALE # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SOUND=y
CONFIG_DM_I2C_COMPAT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_BOOTSTAGE=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_MMC_ENV_DEV=0"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_SYS_EXTRA_OPTIONS="NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_TARGET_BCM28155_AP=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_SYS_EXTRA_OPTIONS="BCM_SF2_ETH,BCM_SF2_ETH_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_BLACKFIN=y
CONFIG_TARGET_BCT_BRETTL2=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF518F_EZBRD=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF526_EZBRD=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF527_AD7160_EVAL=y
# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF527_EZKIT=y
CONFIG_SYS_EXTRA_OPTIONS="BF527_EZKIT_REV_2_1"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_LIB_RAND=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF527_SDP=y
# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF533_EZKIT=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_LIB_RAND=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF533_STAMP=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
# CONFIG_REGEX is not set
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF537_PNAV=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF537_STAMP=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF538F_EZKIT=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_REGEX is not set
CONFIG_LIB_RAND=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF548_EZKIT=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_SYS_PROMPT="Acvilon> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF561_EZKIT=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_LIB_RAND=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_BF609_EZKIT=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="br4>"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NET is not set
CONFIG_SYS_PROMPT="Calimain > "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_STOP_STR="\x0b"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM=y
CONFIG_DM_THERMAL=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_CHROMEBOOK_JERRY=y
+CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x80000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PMIC=y
CONFIG_HAVE_VGA_BIOS=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_BOOTSTAGE=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_LPC=y
CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_HAVE_VGA_BIOS=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_BOOTSTAGE=y
CONFIG_SPI_FLASH=y
CONFIG_DM_PCI=y
CONFIG_DM_RTC=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_LPC=y
CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_CM_BF527=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_CM_BF533=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_LIB_RAND=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_CM_BF537E=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_CM_BF537U=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_CM_BF548=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
# CONFIG_REGEX is not set
CONFIG_BLACKFIN=y
CONFIG_TARGET_CM_BF561=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_LIB_RAND=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_SYS_PROMPT="CM-T335 # "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_DM=y
CONFIG_SYS_PROMPT="CM-T54 # "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_DM_USB=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
CONFIG_SYS_PROMPT="Colibri VFxx # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM=y
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
CONFIG_SYS_PROMPT="Colibri VFxx # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
CONFIG_OF_CONTROL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_TPM=y
-CONFIG_SPI_FLASH=y
CONFIG_DM=y
-CONFIG_DM_TPM=y
-CONFIG_TPM_ATMEL_TWI=y
+CONFIG_SPI_FLASH=y
CONFIG_TPM_AUTH_SESSIONS=y
CONFIG_TPM=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_TPM=y
-CONFIG_SPI_FLASH=y
CONFIG_DM=y
-CONFIG_DM_TPM=y
-CONFIG_TPM_ATMEL_TWI=y
+CONFIG_SPI_FLASH=y
CONFIG_TPM_AUTH_SESSIONS=y
CONFIG_TPM=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TPM=y
CONFIG_DM=y
-CONFIG_DM_TPM=y
-CONFIG_TPM_ATMEL_TWI=y
CONFIG_TPM_AUTH_SESSIONS=y
CONFIG_TPM=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TPM=y
CONFIG_DM=y
-CONFIG_DM_TPM=y
-CONFIG_TPM_ATMEL_TWI=y
CONFIG_TPM_AUTH_SESSIONS=y
CONFIG_TPM=y
CONFIG_E1000=y
CONFIG_DM_PCI=y
CONFIG_DM_RTC=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_LPC=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_BOOTSTAGE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_DM_GPIO=y
CONFIG_SPL=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_DNP5370=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_STACK_R=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_OF_CONTROL=y
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_OF_CONTROL=y
-CONFIG_SPL_DISABLE_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
-CONFIG_DM_GPIO=y
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_CONS_INDEX=3
+CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="duovero # "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="ea20 > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="ECO5-PK # "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_TARGET_EFI=y
CONFIG_TSC_CALIBRATION_BYPASS=y
# CONFIG_CMD_BOOTM is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NET is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_FIREFLY_RK3288=y
+CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly"
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x80000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PMIC=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
CONFIG_GENERATE_PIRQ_TABLE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_BOOTSTAGE=y
CONFIG_SPARC=y
CONFIG_TARGET_GR_XC3S_1500=y
CONFIG_SYS_TEXT_BASE=0x00000000
-# CONFIG_CMD_ELF is not sets
+# CONFIG_CMD_ELF is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_GW_VENTANA=y
CONFIG_DM_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x18000000
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x18000000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
CONFIG_SYS_PROMPT="Ventana > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_ARM=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_IBF_DSP561=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_LIB_RAND=y
CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
CONFIG_TARGET_IP04=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_TARGET_K2G_EVM=y
+CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="k2g-evm"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
-CONFIG_SPL_DISABLE_OF_CONTROL=y
-CONFIG_SPI_FLASH=y
CONFIG_DM=y
-CONFIG_DM_SERIAL=y
-CONFIG_KEYSTONE_SERIAL=y
+CONFIG_SPI_FLASH=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_ARM=y
CONFIG_TARGET_LS1021ATWR=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr"
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr"
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
-CONFIG_DM_SPI=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
CONFIG_ARM=y
CONFIG_TARGET_LS1043ARDB=y
-CONFIG_FSL_LAYERSCAPE=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT,SYS_FSL_DDR4"
CONFIG_ARM=y
CONFIG_TARGET_LS1043ARDB=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT,SYS_FSL_DDR4"
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SYS_FSL_DDR4"
CONFIG_ARM=y
CONFIG_TARGET_LS1043ARDB=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SYS_FSL_DDR4"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,ENV_IS_IN_SPI_FLASH"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_DM_THERMAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
CONFIG_SPL=y
CONFIG_SYS_PROMPT="U-Boot-mONStR> "
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_BOOTSTAGE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_SUNXI_NO_PMIC=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SYS_PROMPT="mt_ventoux => "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_SPI_FLASH"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_DM_THERMAL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6QSABREAUTO=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q"
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_DM_THERMAL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_TARGET_MX6SLEVK=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL"
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_DM_THERMAL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_TARGET_MX6UL_14X14_EVK=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
+CONFIG_CMD_GPIO=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_TARGET_MX6UL_9X9_EVK=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
+CONFIG_CMD_GPIO=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
# CONFIG_CMD_SAVEENV is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_TPM=y
CONFIG_CROS_EC_SPI=y
CONFIG_SPI_FLASH=y
CONFIG_TEGRA114_SPI=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_PROMPT="ODROID-XU3 # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_ADC=y
+CONFIG_ADC_EXYNOS=y
CONFIG_DM_I2C_COMPAT=y
CONFIG_DM_PMIC=y
-CONFIG_CMD_PMIC=y
-CONFIG_ERRNO_STR=y
-CONFIG_DM_REGULATOR=y
CONFIG_PMIC_S2MPS11=y
+CONFIG_DM_REGULATOR=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_VIDEO_BRIDGE=y
-CONFIG_ADC=y
-CONFIG_ADC_EXYNOS=y
+CONFIG_ERRNO_STR=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_CMD_PMIC=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES=y
CONFIG_SPL=y
CONFIG_SYS_PROMPT="Peach-Pi # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_SPL=y
CONFIG_SYS_PROMPT="Peach-Pit # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="pepper# "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="picon > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="titanium > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
CONFIG_SYS_PROMPT="pr1>"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_USB_EHCI_HCD=y
+CONFIG_CMD_GPIO=y
CONFIG_AXP152_POWER=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_DM_THERMAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_PHYS_TO_BUS=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_PHYS_TO_BUS=y
CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SOUND=y
CONFIG_BOOTSTAGE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_DEVRES=y
+CONFIG_ADC=y
+CONFIG_ADC_SANDBOX=y
CONFIG_CLK=y
CONFIG_SANDBOX_GPIO=y
CONFIG_SYS_I2C_SANDBOX=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_RAM=y
+CONFIG_REMOTEPROC_SANDBOX=y
CONFIG_DM_RTC=y
CONFIG_SANDBOX_SERIAL=y
CONFIG_SOUND=y
CONFIG_SOUND_SANDBOX=y
CONFIG_SANDBOX_SPI=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_SANDBOX=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_UT_TIME=y
CONFIG_UT_DM=y
CONFIG_UT_ENV=y
-CONFIG_REMOTEPROC_SANDBOX=y
-CONFIG_CMD_REMOTEPROC=y
-CONFIG_ADC=y
-CONFIG_ADC_SANDBOX=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPL=y
CONFIG_SYS_PROMPT="SMDK5250 # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SOUND=y
CONFIG_CMD_PMIC=y
CONFIG_SPL=y
CONFIG_SYS_PROMPT="SMDK5420 # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM_I2C_COMPAT=y
CONFIG_SPI_FLASH=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
CONFIG_SYS_PROMPT="snow # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SOUND=y
CONFIG_CMD_PMIC=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPL_SIMPLE_BUS=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_ETH=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_TARGET_SOCFPGA_DENX_MCVEVK=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPL_SIMPLE_BUS=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_ETH=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPL_SIMPLE_BUS=y
CONFIG_DWAPB_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_SPL=y
CONFIG_SYS_PROMPT="spring # "
# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_SOUND=y
CONFIG_CMD_PMIC=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
-CONFIG_DM_TPM=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SYS_PROMPT="Matrix U-Boot> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_DM_THERMAL=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_TCM_BF518=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
CONFIG_BLACKFIN=y
CONFIG_TARGET_TCM_BF537=y
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="Titanium > "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_TARGET_TQMA6=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_TQMA6X_SPI_BOOT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_TQMA6S=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_TQMA6X_SPI_BOOT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_SPI_FLASH=y
CONFIG_AUTOBOOT_PROMPT="Enter password in %d seconds to stop autoboot\n"
CONFIG_AUTOBOOT_ENCRYPTION=y
CONFIG_AUTOBOOT_STOP_STR_SHA256="36a9e7f1c95b82ffb99743e0c5c4ce95d83c9a430aac59f84ef3cbfab6145068"
+CONFIG_CMD_GPIO=y
CONFIG_PCA9551_LED=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SYS_PROMPT="twister => "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_TARGET_UDOO=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_DM_THERMAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
+CONFIG_SYS_PROMPT="VExpress64# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
CONFIG_DM=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_DM_THERMAL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_USB=y
CONFIG_ARM=y
CONFIG_TARGET_WOODBURN=y
CONFIG_SYS_PROMPT="woodburn U-Boot > "
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
CONFIG_SYS_PROMPT="woodburn U-Boot > "
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_DM=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_FIT_SIGNATURE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_ZYNQ_QSPI=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_FIT_SIGNATURE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_ZYNQ_QSPI=y
CONFIG_FIT_SIGNATURE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_ZYNQ_QSPI=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_ZYNQ_QSPI=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_FIT_SIGNATURE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPI_FLASH=y
CONFIG_ZYNQ_QSPI=y
CONFIG_FIT_SIGNATURE=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_SEPARATE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_SYS_MALLOC_LEN - \
0x10000)
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_CMD_GPIO
#endif /* __CONFIG_H */
CONFIG_SYS_MALLOC_LEN - \
0x10000)
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_CMD_GPIO
#endif /* __CONFIG_H */
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
#define CONFIG_MPC83XX_GPIO 1
-#define CONFIG_CMD_GPIO 1
/*
* Serial Port
#endif
/* Misc Extra Settings */
-#define CONFIG_CMD_GPIO 1
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#define CONFIG_CMD_BOOTZ
# define CONFIG_CMD_BOOTLDR
# define CONFIG_CMD_CACHE
# define CONFIG_CMD_CPLBINFO
-# define CONFIG_CMD_GPIO
# define CONFIG_CMD_KGDB
# define CONFIG_CMD_LDRINFO
# define CONFIG_CMD_REGINFO
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_I2C
/* GPIO */
#define CONFIG_OMAP_GPIO
-#define CONFIG_CMD_GPIO
/*
* ----------------------------------------------------------------------------
* The following are general good-enough settings for U-Boot. We set a
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_GPIO
#ifndef CONFIG_DRIVER_TI_EMAC
#undef CONFIG_CMD_DHCP
*/
#define CONFIG_OMAP /* in a TI OMAP core */
#define CONFIG_OMAP_GPIO
-#define CONFIG_CMD_GPIO
#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
#define CONFIG_OMAP_COMMON
/* Common ARM Erratas */
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
-#define CONFIG_CMD_GPIO
#define CONFIG_SYS_NO_FLASH
/* GPIO support */
#define CONFIG_DM_GPIO
-#define CONFIG_CMD_GPIO
#define CONFIG_VYBRID_GPIO
/* Dynamic MTD partition support */
* GPIO
*/
#define CONFIG_LPC32XX_GPIO
-#define CONFIG_CMD_GPIO
/*
* SSP/SPI
#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */
#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_GPIO
#undef CONFIG_CMD_ASKENV
#undef CONFIG_CMD_BOOTZ
#undef CONFIG_SUPPORT_RAW_INITRD
/*
* Misc Settings
*/
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_STRINGS
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_SMC911X_BASE 0x2C000000
/* GPIO */
-#define CONFIG_CMD_GPIO
/* ENV related config options */
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_I2C
-#define CONFIG_CMD_GPIO
#ifdef CONFIG_CMD_BDI
#define CONFIG_CLOCKS
/* Enable Time Command */
#define CONFIG_CMD_TIME
-#define CONFIG_CMD_GPIO
/* USB */
#define CONFIG_CMD_USB
/* GPIO */
#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
/* Thermal */
#define CONFIG_IMX_THERMAL
#endif
#define CONFIG_HIKEY_GPIO
-#define CONFIG_CMD_GPIO
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_GPIO
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_I2C
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
-#define CONFIG_CMD_GPIO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
# define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_LED
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PING
/* GPIO */
#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
/* MMC */
#define CONFIG_MMC
/* GPIO */
#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
/* UART */
#define CONFIG_MXC_UART
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_GPIO /* Enable gpio command */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_EXYNOS_ACE_SHA
#define CONFIG_LIB_HW_RAND
-#define CONFIG_CMD_GPIO
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE /* USB storage support */
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_LED /* LED support */
-#define CONFIG_CMD_GPIO /* Enable gpio command */
#define CONFIG_CMD_DHCP
#define CONFIG_VIDEO_OMAP3 /* DSS Support */
#include <configs/ti_omap4_common.h>
/* GPIO */
-#define CONFIG_CMD_GPIO
/* ENV related config options */
/* GPIO is not supported */
#undef CONFIG_INTEL_ICH6_GPIO
-#undef CONFIG_CMD_GPIO
/* SPI is not supported */
#undef CONFIG_ICH_SPI
#define CONFIG_COMMAND_HISTORY
/* Commands */
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MMC
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_MD5SUM
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GPT
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PING
#define CONFIG_OMAP_GPIO
/* Gpio cmd support */
-#define CONFIG_CMD_GPIO
/* Watchdog */
#define CONFIG_HW_WATCHDOG
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_USB
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
/* GPIO */
#define CONFIG_SUNXI_GPIO
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_CMD_GPIO
#ifdef CONFIG_VIDEO
/*
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC /* MMC support */
GENERATED_GBL_DATA_SIZE)
#define CONFIG_TEGRA_GPIO
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_ENTERRCM
/* Defines for SPL */
#define CONFIG_CMD_SPI
/* GPIO block */
-#define CONFIG_CMD_GPIO
/*
* The following are general good-enough settings for U-Boot. We set a
/* And no support for GPIO, yet.. */
#undef CONFIG_SPL_GPIO_SUPPORT
-#undef CONFIG_CMD_GPIO
/* we may include files below only after all above definitions */
#include <asm/arch/hardware.h>
#define CONFIG_SYS_RTC_DS1337_NOOSC
#define CONFIG_CMD_DATE
-#define CONFIG_CMD_GPIO
/* LED */
#define CONFIG_CMD_LED
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_MXC_GPIO
#define CONFIG_NET_RETRY_COUNT 100
* GPIO
*/
-#define CONFIG_CMD_GPIO
#define CONFIG_LPC32XX_GPIO
/*
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MTDPARTS
*/
#define CONFIG_CMD_DATE
#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_IO
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PCI
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#endif
#define CONFIG_ZYNQ_GPIO
-#define CONFIG_CMD_GPIO
/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)