powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros

Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW
macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS.
This is necessary for the assembly-language code that relocates CCSR, since
the assembler does not understand 64-bit constants.

CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the
CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it
should not be defined in a board header file.  Similarly,
CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so
it should also not be defined in the board header file.

CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that
CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT,
and so CCSR will not be relocated.

Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot
builds (e.g. NAND) are required to relocate CCSR only during the last stage
(i.e. the "real" U-Boot).  All other stages should define
CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated.

README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/README b/README
index a43da97a4149db3bf9cea0a1b9e02ef69eee9802..91b6695cf90c25269a89bb1fefbea7e392ef0683 100644 (file)
--- a/README
+++ b/README
@@ -2862,6 +2862,43 @@ Low Level (hardware related) configuration options:
                and RPXsuper) to be able to adjust the position of
                the IMMR register after a reset.
 
+- CONFIG_SYS_CCSRBAR_DEFAULT:
+               Default (power-on reset) physical address of CCSR on Freescale
+               PowerPC SOCs.
+
+- CONFIG_SYS_CCSRBAR:
+               Virtual address of CCSR.  On a 32-bit build, this is typically
+               the same value as CONFIG_SYS_CCSRBAR_DEFAULT.
+
+               CONFIG_SYS_DEFAULT_IMMR must also be set to this value,
+               for cross-platform code that uses that macro instead.
+
+- CONFIG_SYS_CCSRBAR_PHYS:
+               Physical address of CCSR.  CCSR can be relocated to a new
+               physical address, if desired.  In this case, this macro should
+               be set to that address.  Otherwise, it should be set to the
+               same value as CONFIG_SYS_CCSRBAR_DEFAULT.  For example, CCSR
+               is typically relocated on 36-bit builds.  It is recommended
+               that this macro be defined via the _HIGH and _LOW macros:
+
+               #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH
+                       * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+- CONFIG_SYS_CCSRBAR_PHYS_HIGH:
+               Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS.  This value is typically
+               either 0 (32-bit build) or 0xF (36-bit build).  This macro is
+               used in assembly code, so it must not contain typecasts or
+               integer size suffixes (e.g. "ULL").
+
+- CONFIG_SYS_CCSRBAR_PHYS_LOW:
+               Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS.  This macro is
+               used in assembly code, so it must not contain typecasts or
+               integer size suffixes (e.g. "ULL").
+
+- CONFIG_SYS_CCSR_DO_NOT_RELOCATE:
+               If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be
+               forced to a value that ensures that CCSR is not relocated.
+
 - Floppy Disk Support:
                CONFIG_SYS_FDC_DRIVE_NUMBER
 

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7de8f744e55632af0cc6911bb8ae5091387e116b..691c075582a4de5b1f9ff4fe5fde19a26d9b5da9 100644 (file)
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -23,6 +23,10 @@
 
 /* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
 
+#ifdef CONFIG_SYS_CCSRBAR_DEFAULT
+#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
+#endif
+
 /* Number of TLB CAM entries we have on FSL Book-E chips */
 #if defined(CONFIG_E500MC)
 #define CONFIG_SYS_NUM_TLBCAMS         64
@@ -34,34 +38,41 @@
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8540)
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                8
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8541)
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                8
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8544)
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                10
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8548)
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                10
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8555)
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                8
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8560)
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                8
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8568)
 #define CONFIG_MAX_CPUS                        1
@@ -70,6 +81,7 @@
 #define QE_MURAM_SIZE                  0x10000UL
 #define MAX_QE_RISC                    2
 #define QE_NUM_OF_SNUM                 28
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8569)
 #define CONFIG_MAX_CPUS                        1
@@ -78,11 +90,13 @@
 #define QE_MURAM_SIZE                  0x20000UL
 #define MAX_QE_RISC                    4
 #define QE_NUM_OF_SNUM                 46
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 #elif defined(CONFIG_MPC8572)
 #define CONFIG_MAX_CPUS                        2
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_DDR_115
 #define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
 
@@ -106,6 +120,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
@@ -116,6 +131,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define QE_MURAM_SIZE                  0x6000UL
@@ -128,6 +144,7 @@
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_FSL_SATA_ERRATUM_A001
@@ -151,6 +168,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
@@ -166,6 +184,7 @@
 #define QE_MURAM_SIZE                  0x6000UL
 #define MAX_QE_RISC                    1
 #define QE_NUM_OF_SNUM                 28
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 
 /* P1017 is single core version of P1023 */
 #elif defined(CONFIG_P1017)
@@ -179,6 +198,7 @@
 #define CONFIG_SYS_BMAN_NUM_PORTALS    3
 #define CONFIG_SYS_FM_MURAM_SIZE       0x10000
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff600000
 
 #elif defined(CONFIG_P1020)
 #define CONFIG_MAX_CPUS                        2
@@ -186,6 +206,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
@@ -195,6 +216,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define QE_MURAM_SIZE                  0x6000UL
@@ -206,6 +228,7 @@
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_FSL_SATA_ERRATUM_A001
@@ -221,6 +244,7 @@
 #define CONFIG_SYS_BMAN_NUM_PORTALS    3
 #define CONFIG_SYS_FM_MURAM_SIZE       0x10000
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff600000
 
 /* P1024 is lower end variant of P1020 */
 #elif defined(CONFIG_P1024)
@@ -229,6 +253,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
@@ -239,6 +264,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define QE_MURAM_SIZE                  0x6000UL
@@ -250,6 +276,7 @@
 #define CONFIG_MAX_CPUS                        1
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
 
@@ -257,6 +284,7 @@
 #define CONFIG_MAX_CPUS                        2
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
 
@@ -271,6 +299,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       32
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -288,6 +317,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       32
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -305,6 +335,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       32
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -318,6 +349,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       16
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,p4080-pcie"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 
 #elif defined(CONFIG_PPC_P4080)
 #define CONFIG_MAX_CPUS                        8
@@ -333,6 +365,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       16
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,p4080-pcie"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002
 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003
@@ -359,6 +392,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       32
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -376,6 +410,7 @@
 #define CONFIG_SYS_FM_MURAM_SIZE       0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV       32
 #define CONFIG_SYS_FSL_PCIE_COMPAT     "fsl,qoriq-pcie-v2.2"
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -385,4 +420,8 @@
 #error Processor type not defined for this platform
 #endif
 
+#ifndef CONFIG_SYS_CCSRBAR_DEFAULT
+#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
+#endif
+
 #endif /* _ASM_MPC85xx_CONFIG_H_ */

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 783ed518e5813d8d7d7253ef7edabee7ba4c3e9b..f3d325a0c97a713d413619d36ebe9e3913a8fa33 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -127,22 +127,11 @@
 #define CONFIG_SYS_L2_SIZE             (512 << 10)
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS        0xfffe00000ull /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
-#endif
-#define CONFIG_SYS_IMMR        CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT     CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index e1d933ec49bf816a78ebb885fc847fc1fc6ee951..fc0edacede217b8c9542190cdc922614f8375f5b 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -89,15 +89,8 @@
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1

diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 5918e644d16804a3fde2c9ef5b22817e4f808322..ae19036d87b36a4430e5c64ea7f039036328db6a 100644 (file)
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -62,14 +62,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1

diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index b25fb55a463a73e9aa70b073b6dadcd118cbbdcf..6b03d27410a94fe9cfb69eca6e0b66701d896acc 100644 (file)
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -74,14 +74,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index c9a0f60580f28e84be37536f002e10b4f8b48196..aca77ff6b970e19549bf4dc092ea7d01cec2be1a 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -77,14 +77,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2

diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 4c580a37e317a2060c05deebc74665bcf48c2c89..93d4c3e5fbe0e66f9bf8f67449cfa2055e0f2872 100644 (file)
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -62,14 +62,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1

diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index f55ef9d79616473db78299ead7e8be81f92fb0c8..e03fea3cc93827f4a599d6dac425a5b3f5f9adcb 100644 (file)
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -86,15 +86,8 @@
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index f7df7f0388000c654df8dcea38c4846c674b3126..cf0ea47e7a63f90e61ee1f6426fcae5b97f417ce 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -71,14 +71,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2

diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index fa626bb977a60ea043e5d2c070c1de9c5866e1a7..dd7278c4b8a41a8ca31a1665c2ac229845408103 100644 (file)
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -105,20 +105,11 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_L2_SIZE             (512 << 10)
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
-                                               /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR
-                                               /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT     CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index bb8fb669c3d84b69848ef8ac97a3fc38754f0966..6067e608521fe3951d68fda9b7f52e902484be55 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -112,22 +112,11 @@
 #define CONFIG_SYS_L2_SIZE             (512 << 10)
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS                0xfffe00000ull  /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#endif
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT             CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index a11897552806ea4836b32979aa09aecd1d9b1166..a3cccf4c3faab11d181793d91990f71a07739ac2 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -64,18 +64,8 @@
 #define CONFIG_SYS_MEMTEST_START       0x00000000
 #define CONFIG_SYS_MEMTEST_END         0x7fffffff
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS                0xfffe00000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS                CONFIG_SYS_CCSRBAR
-#endif
-#define CONFIG_SYS_IMMR                        CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_DDR_SPD

diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 95f3a2c181443a0dc2924884edf14dfc670d70a3..24042dfb6531fae35f10c2f0db01ab2f53846515 100644 (file)
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -99,15 +99,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_LBC_LBCR    0x00000000      /* Implement conversion of
                                                addresses in the LBC */
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff600000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xff600000      /* relocated CCSRBAR */
-/* physical addr of CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_IMMR        CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index df88b79bbefb7a48a5b9ee869d794269bcf36d32..3ffdb1a02a1a63ef5dcbef7fd9dbcd61b717d11f 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -148,24 +148,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_L2_SIZE             (512 << 10)
 #define CONFIG_SYS_INIT_L2_END         (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS        0xfffe00000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
-#endif
-                                                       /* CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses */
-                                                       /* CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT     CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 90fe7c4047764a1e81303c23562973746b345806..f6b788e578dd1e9c829fb0b84b2ee3f4da0af652 100644 (file)
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -118,18 +118,8 @@
 #define CONFIG_SYS_L2_SIZE             (512 << 10)
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS                0xfffe00000ull  /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#endif
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 638dbe7a6dcd0acdb8150a8982f7d55d46ee08a3..03dbe55c3b9a8034426ac41652f318d88a263a32 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -138,20 +138,6 @@
 #define CONFIG_SYS_L3_SIZE             (1024 << 10)
 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xfe000000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS                0xffe000000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
-#endif
-/* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR
-
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_DCSRBAR             0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS                0xf00000000ull

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 72559c0c023fb4491258fc796f3008e08939c862..b5612d66cae8555c1277b26456a726d158747133 100644 (file)
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -94,20 +94,6 @@
 #error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
 #endif
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default      */
-
-#if XXX
-  #define CONFIG_SYS_CCSRBAR           0xfdf00000      /* relocated CCSRBAR    */
-#else
-  #define CONFIG_SYS_CCSRBAR           0xff700000      /* default CCSRBAR      */
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
-
 #define CONFIG_SYS_SDRAM_SIZE          512             /* DDR is 512MB */
 
 /* DDR Setup */

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b336723f55dd12a1c0edf4e3af5839f1d335d341..fe6b7281040360a0cfc0062853ae15b4d07edbe2 100644 (file)
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -130,18 +130,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x00000000
 #define CONFIG_SYS_MEMTEST_END         0x10000000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xFF700000      /* CCSRBAR Default      */
 #ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_CCSRBAR             0xA0000000      /* relocated CCSRBAR    */
-#else /* !CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_CCSRBAR             0xE0000000      /* relocated CCSRBAR    */
-#endif /* CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
+#define CONFIG_SYS_CCSRBAR             0xA0000000
+#else
+#define CONFIG_SYS_CCSRBAR             0xE0000000
+#endif
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /*
  * DDR Setup

diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index adf9906bce9f3e18c8989db8267e100d9c4a7d7b..eb89b30b368a67a966602b93bbac5b6b46f91611 100644 (file)
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -144,19 +144,6 @@
 #define CONFIG_SYS_L3_SIZE             (1024 << 10)
 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xfe000000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xfe000000      /* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS                0xffe000000ull  /* physical addr of CCSRBAR */
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#endif
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
-
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_DCSRBAR             0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS                0xf00000000ull

diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index e76ca73d4730727d3235231985f54c86666b0984..f0ed4d10833e1ae908fbdba92514449153baba20 100644 (file)
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -64,20 +64,8 @@
 
 #define CONFIG_SYS_CLK_FREQ      33000000 /* sysclk for MPC85xx */
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
-#define CONFIG_SYS_CCSRBAR         0xe0000000
-
-#ifdef CONFIG_PHYS_64BIT
-# define CONFIG_SYS_CCSRBAR_PHYS   0xfe0000000ull
-#else
-# define CONFIG_SYS_CCSRBAR_PHYS   CONFIG_SYS_CCSRBAR
-#endif
-
-#define CONFIG_SYS_IMMR            CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2

diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 7bf9fc76c2168a5b301d76aa71c5807fa22528e4..4ec323ecec02083e0c467eb0731a75589f0965fc 100644 (file)
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -103,14 +103,8 @@
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2

diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 435b148f3c39ec9c11f868dc474c00131d0af126..e0af0d26a81a8a3d309fa5657a1b1c76c633e68e 100644 (file)
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -92,20 +92,6 @@
 #error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
 #endif
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default      */
-
-#if XXX
-  #define CONFIG_SYS_CCSRBAR           0xfdf00000      /* relocated CCSRBAR    */
-#else
-  #define CONFIG_SYS_CCSRBAR           0xff700000      /* default CCSRBAR      */
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
-
 #define CONFIG_SYS_SDRAM_SIZE          512             /* DDR is 512MB */
 
 /* DDR Setup */

diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 5f2fb1e9279cf89c6656c02a450f6035b40990d5..af62aea7a685e6e7d6a025dedc1012b778305188 100644 (file)
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -91,14 +91,8 @@
 #define CONFIG_SYS_MEMTEST_START       0x00400000
 #define CONFIG_SYS_MEMTEST_END         0x00C00000
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xFF700000      /* CCSRBAR Default      */
-#define CONFIG_SYS_CCSRBAR             0xE0000000      /* relocated CCSRBAR    */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
+#define CONFIG_SYS_CCSRBAR             0xE0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2

diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index fc3881d22babd44f3cac1ebe2e868f32b60639fc..66738d5953f328353eeb7479b45da552ed60dfa5 100644 (file)
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -109,12 +109,9 @@
 
 #ifdef CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_CCSRBAR_DEFAULT     0x40000000      /* CCSRBAR by BDI cfg   */
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default      */
 #endif
-#define CONFIG_SYS_CCSRBAR             0xfdf00000      /* relocated CCSRBAR    */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
+#define CONFIG_SYS_CCSRBAR             0xfdf00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 141da26473391daecda7fe5117d9bc7ee66738b5..a421ba43b2329a538aa945499ff542a3f3943c03 100644 (file)
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -121,12 +121,10 @@
 
 #ifdef CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_CCSRBAR_DEFAULT     0x40000000      /* CCSRBAR by BDI cfg   */
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default      */
 #endif
-#define CONFIG_SYS_CCSRBAR             0xe0000000      /* relocated CCSRBAR    */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR    */
+
+#define CONFIG_SYS_CCSRBAR             0xe0000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1

diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index b6b391f89f45cfcc1fde5feea2aab1db7756666d..42517c9da83147f70aa7b9ef8cdf0a6ce0a84acd 100644 (file)
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -78,14 +78,8 @@
 #define CONFIG_BTB                     /* toggle branch predition */
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xef000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /*
  * Diagnostics

diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index a74766dcec9248cf68db9816866a26ced08e9ddb..202f209a7b6e2b30c5984ddc721d0dd3fc641ed1 100644 (file)
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -96,14 +96,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_BTB                     /* toggle branch predition */
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xef000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /*
  * Diagnostics

diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 6588867b878467320a92ac7fb15dc93849a5c51a..0c2e7edb2388629180daa178ea47863b0e732f3a 100644 (file)
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -93,14 +93,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_BTB                     /* toggle branch predition */
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR             0xef000000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /*
  * Diagnostics

diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index 2495b99c310796f646b3d480e9208db4de83fcf9..11d898527bf1fedc35667927d6938c95f0fab90a 100644 (file)
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -26,4 +26,46 @@
 #define SCCR_DFBRG10    0x00000002      /* BRGCLK division by 64 */
 #define SCCR_DFBRG11    0x00000003      /* BRGCLK division by 256 */
 
+/*
+ * Define default values for some CCSR macros to make header files cleaner*
+ *
+ * To completely disable CCSR relocation in a board header file, define
+ * CONFIG_SYS_CCSR_DO_NOT_RELOCATE.  This will force CONFIG_SYS_CCSRBAR_PHYS
+ * to a value that is the same as CONFIG_SYS_CCSRBAR.
+ */
+
+#ifdef CONFIG_SYS_CCSRBAR_PHYS
+#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly.  Use \
+CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead."
+#endif
+
+#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH   0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR             CONFIG_SYS_CCSRBAR_DEFAULT
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH   0xf
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH   0
+#endif
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR_DEFAULT
+#endif
+
+#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
+                                CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+#ifndef CONFIG_SYS_IMMR
+#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR
+#endif
+
 #endif /* __MPC85xx_H__ */