FSL DDR: Convert MPC8548CDS to new DDR code.
authorJon Loeliger <jdl@freescale.com>
Tue, 18 Mar 2008 18:51:06 +0000 (13:51 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 27 Aug 2008 16:43:50 +0000 (11:43 -0500)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
board/freescale/mpc8548cds/Makefile
board/freescale/mpc8548cds/ddr.c [new file with mode: 0644]
board/freescale/mpc8548cds/mpc8548cds.c
include/configs/MPC8548CDS.h

index 98f153056d5c3821df09df368579b475cb505611..c19a527d16591170c6eb8d8dfa3bac29a9ed0227 100644 (file)
@@ -27,6 +27,7 @@ include $(TOPDIR)/config.mk
 LIB    = $(obj)lib$(BOARD).a
 
 COBJS-y        += $(BOARD).o
+COBJS-y        += ddr.o
 COBJS-y        += law.o
 COBJS-y        += tlb.o
 
diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c
new file mode 100644 (file)
index 0000000..f07d746
--- /dev/null
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+
+static void
+get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+       i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+       return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
+                       unsigned int ctrl_num)
+{
+       unsigned int i;
+
+       if (ctrl_num) {
+               printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+               return;
+       }
+
+       for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+               get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
+       }
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+{
+       /*
+        * Factors to consider for clock adjust:
+        *      - number of chips on bus
+        *      - position of slot
+        *      - DDR1 vs. DDR2?
+        *      - ???
+        *
+        * This needs to be determined on a board-by-board basis.
+        *      0110    3/4 cycle late
+        *      0111    7/8 cycle late
+        */
+       popts->clk_adjust = 7;
+
+       /*
+        * Factors to consider for CPO:
+        *      - frequency
+        *      - ddr1 vs. ddr2
+        */
+       popts->cpo_override = 10;
+
+       /*
+        * Factors to consider for write data delay:
+        *      - number of DIMMs
+        *
+        * 1 = 1/4 clock delay
+        * 2 = 1/2 clock delay
+        * 3 = 3/4 clock delay
+        * 4 = 1   clock delay
+        * 5 = 5/4 clock delay
+        * 6 = 3/2 clock delay
+        */
+       popts->write_data_delay = 3;
+
+       /*
+        * Factors to consider for half-strength driver enable:
+        *      - number of DIMMs installed
+        */
+       popts->half_strength_driver_enable = 0;
+}
index 0b037cc69792319095706a416958b01dbef75bbf..84d3850cc8408e3b430671032e9ab0df24439165 100644 (file)
 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
+#include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/immap_fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
 #include <libfdt.h>
@@ -111,7 +113,10 @@ initdram(int board_type)
                udelay(200);
        }
 #endif
-       dram_size = spd_sdram();
+
+       dram_size = fsl_ddr_sdram();
+       dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+       dram_size *= 0x100000;
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
        /*
@@ -119,6 +124,7 @@ initdram(int board_type)
         */
        ddr_enable_ecc(dram_size);
 #endif
+
        /*
         * SDRAM Initialization
         */
index 33c5c933e0f6adf6f30413e36106d7a4ee7b2b9c..ec0b4ffc660c77c9c7d6f30ce67193121b3595d8 100644 (file)
 
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_DLL                 /* possible DLL fix needed */
-#undef CONFIG_DDR_2T_TIMING            /* Sets the 2T timing bit */
-
-#define CONFIG_DDR_ECC                 /* only for ECC DDR module */
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER      /* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE          0xDeadBeef
 #define CONFIG_INTERRUPTS              /* enable pci, srio, ddr interrupts */
-
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
@@ -67,8 +59,6 @@
  */
 #define CONFIG_ASSUME_AMD_FLASH
 
-#define MPC85xx_DDR_SDRAM_CLK_CNTL     /* 85xx has clock control reg */
-
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
 #endif
@@ -103,17 +93,27 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI2_ADDR  (CFG_CCSRBAR+0x9000)
 #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
 
-/*
- * DDR Setup
- */
+/* DDR Setup */
+#define CONFIG_FSL_DDR2
+#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_SPD
+#define CONFIG_DDR_DLL                 /* possible DLL fix needed */
+
+#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE  0xDeadBeef
+
 #define CFG_DDR_SDRAM_BASE     0x00000000      /* DDR is system memory*/
 #define CFG_SDRAM_BASE         CFG_DDR_SDRAM_BASE
 
-#define SPD_EEPROM_ADDRESS     0x51            /* DDR DIMM */
+#define CONFIG_NUM_DDR_CONTROLLERS     1
+#define CONFIG_DIMM_SLOTS_PER_CTLR     1
+#define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
-/*
- * Make sure required options are set
- */
+/* I2C addresses of SPD EEPROMs */
+#define SPD_EEPROM_ADDRESS     0x51    /* CTLR 0 DIMM 0 */
+
+/* Make sure required options are set */
 #ifndef CONFIG_SPD_EEPROM
 #error ("CONFIG_SPD_EEPROM is required")
 #endif
@@ -342,6 +342,9 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
+#define CFG_64BIT_VSPRINTF     1
+#define CFG_64BIT_STRTOUL      1
+
 /*
  * I2C
  */