endif
endif
endif
-ifeq ($(CONFIG_DM_I2C_COMPAT),y)
- @echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
- @echo >&2 "(possibly in a subsequent patch in your series)"
- @echo >&2 "before sending patches to the mailing list."
- @echo >&2 "===================================================="
-endif
ifeq ($(CONFIG_MMC),y)
ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
@echo >&2 "===================== WARNING ======================"
write and speed, is implemented with the bus drivers operations,
which provide methods for bus setting and data transfer. Each chip
device (bus child) info is kept as parent platdata. The interface
- is defined in include/i2c.h. When i2c bus driver supports the i2c
- uclass, but the device drivers not, then DM_I2C_COMPAT config can
- be used as compatibility layer.
-
-config DM_I2C_COMPAT
- bool "Enable I2C compatibility layer"
- depends on DM
- help
- Enable old-style I2C functions for compatibility with existing code.
- This option can be enabled as a temporary measure to avoid needing
- to convert all code for a board in a single commit. It should not
- be enabled for any board in an official release.
+ is defined in include/i2c.h.
config I2C_CROS_EC_TUNNEL
tristate "Chrome OS EC tunnel I2C bus"
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-$(CONFIG_DM_I2C) += i2c-uclass.o
-obj-$(CONFIG_DM_I2C_COMPAT) += i2c-uclass-compat.o
obj-$(CONFIG_DM_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_$(SPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2014 Google, Inc
- */
-
-#include <common.h>
-#include <dm.h>
-#include <errno.h>
-#include <i2c.h>
-
-static int cur_busnum __attribute__((section(".data")));
-
-static int i2c_compat_get_device(uint chip_addr, int alen,
- struct udevice **devp)
-{
- struct dm_i2c_chip *chip;
- int ret;
-
- ret = i2c_get_chip_for_busnum(cur_busnum, chip_addr, alen, devp);
- if (ret)
- return ret;
- chip = dev_get_parent_platdata(*devp);
- if (chip->offset_len != alen) {
- printf("I2C chip %x: requested alen %d does not match chip offset_len %d\n",
- chip_addr, alen, chip->offset_len);
- return -EADDRNOTAVAIL;
- }
-
- return 0;
-}
-
-int i2c_probe(uint8_t chip_addr)
-{
- struct udevice *bus, *dev;
- int ret;
-
- ret = uclass_get_device_by_seq(UCLASS_I2C, cur_busnum, &bus);
- if (ret) {
- debug("Cannot find I2C bus %d: err=%d\n", cur_busnum, ret);
- return ret;
- }
-
- if (!bus)
- return -ENOENT;
-
- return dm_i2c_probe(bus, chip_addr, 0, &dev);
-}
-
-int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer,
- int len)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_compat_get_device(chip_addr, alen, &dev);
- if (ret)
- return ret;
-
- return dm_i2c_read(dev, addr, buffer, len);
-}
-
-int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer,
- int len)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_compat_get_device(chip_addr, alen, &dev);
- if (ret)
- return ret;
-
- return dm_i2c_write(dev, addr, buffer, len);
-}
-
-int i2c_get_bus_num_fdt(int node)
-{
- struct udevice *bus;
- int ret;
-
- ret = uclass_get_device_by_of_offset(UCLASS_I2C, node, &bus);
- if (ret)
- return ret;
-
- return bus->seq;
-}
-
-unsigned int i2c_get_bus_num(void)
-{
- return cur_busnum;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
- cur_busnum = bus;
-
- return 0;
-}
-
-void i2c_init(int speed, int slaveaddr)
-{
- /* Nothing to do here - the init happens through driver model */
-}
-
-void board_i2c_init(const void *blob)
-{
- /* Nothing to do here - the init happens through driver model */
-}
-
-uint8_t i2c_reg_read(uint8_t chip_addr, uint8_t offset)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_compat_get_device(chip_addr, 1, &dev);
- if (ret)
- return 0xff;
- return dm_i2c_reg_read(dev, offset);
-}
-
-void i2c_reg_write(uint8_t chip_addr, uint8_t offset, uint8_t val)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_compat_get_device(chip_addr, 1, &dev);
- if (!ret)
- dm_i2c_reg_write(dev, offset, val);
-}
EXPORT_FUNC(simple_strtol, long, simple_strtol,
const char *, char **, unsigned int)
EXPORT_FUNC(strcmp, int, strcmp, const char *cs, const char *ct)
-#if defined(CONFIG_CMD_I2C) && \
- (!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT))
+#if defined(CONFIG_CMD_I2C) && !defined(CONFIG_DM_I2C)
EXPORT_FUNC(i2c_write, int, i2c_write, uchar, uint, int , uchar * , int)
EXPORT_FUNC(i2c_read, int, i2c_read, uchar, uint, int , uchar * , int)
#else
int strcmp(const char *cs, const char *ct);
unsigned long ustrtoul(const char *cp, char **endp, unsigned int base);
unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base);
-#if defined(CONFIG_CMD_I2C) && \
- (!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT))
+#if defined(CONFIG_CMD_I2C) && !defined(CONFIG_DM_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
#endif
*/
int i2c_deblock(struct udevice *bus);
-#ifdef CONFIG_DM_I2C_COMPAT
-/**
- * i2c_probe() - Compatibility function for driver model
- *
- * Calls dm_i2c_probe() on the current bus
- */
-int i2c_probe(uint8_t chip_addr);
-
-/**
- * i2c_read() - Compatibility function for driver model
- *
- * Calls dm_i2c_read() with the device corresponding to @chip_addr, and offset
- * set to @addr. @alen must match the current setting for the device.
- */
-int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer,
- int len);
-
-/**
- * i2c_write() - Compatibility function for driver model
- *
- * Calls dm_i2c_write() with the device corresponding to @chip_addr, and offset
- * set to @addr. @alen must match the current setting for the device.
- */
-int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer,
- int len);
-
-/**
- * i2c_get_bus_num_fdt() - Compatibility function for driver model
- *
- * @return the bus number associated with the given device tree node
- */
-int i2c_get_bus_num_fdt(int node);
-
-/**
- * i2c_get_bus_num() - Compatibility function for driver model
- *
- * @return the 'current' bus number
- */
-unsigned int i2c_get_bus_num(void);
-
-/**
- * i2c_set_bus_num() - Compatibility function for driver model
- *
- * Sets the 'current' bus
- */
-int i2c_set_bus_num(unsigned int bus);
-
-static inline void I2C_SET_BUS(unsigned int bus)
-{
- i2c_set_bus_num(bus);
-}
-
-static inline unsigned int I2C_GET_BUS(void)
-{
- return i2c_get_bus_num();
-}
-
-/**
- * i2c_init() - Compatibility function for driver model
- *
- * This function does nothing.
- */
-void i2c_init(int speed, int slaveaddr);
-
-/**
- * board_i2c_init() - Compatibility function for driver model
- *
- * @param blob Device tree blbo
- * @return the number of I2C bus
- */
-void board_i2c_init(const void *blob);
-
-/*
- * Compatibility functions for driver model.
- */
-uint8_t i2c_reg_read(uint8_t addr, uint8_t reg);
-void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val);
-
-#endif
-
/**
* struct dm_i2c_ops - driver operations for I2C uclass
*
projects / oweals / u-boot.git / commitdiff