config SYS_MALLOC_LEN
hex "Define memory for Dynamic allocation"
- depends on ARCH_ZYNQ || ARCH_VERSAL
+ depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP
help
This defines memory to be allocated for Dynamic allocation
TODO: Use for other architectures
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in SPL before relocation"
depends on SYS_MALLOC_F
+ default 0x2800 if RCAR_GEN3
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
select SPL_RSA
config SPL_LOAD_FIT
- bool "Enable SPL loading U-Boot as a FIT"
+ bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
select SPL_FIT
help
Normally with the SPL framework a legacy image is generated as part
and passing the correct one to U-Boot.
config SPL_LOAD_FIT_FULL
- bool "Enable SPL loading U-Boot as a FIT"
+ bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
select SPL_FIT
help
Normally with the SPL framework a legacy image is generated as part
VERSION = 2019
PATCHLEVEL = 07
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME =
# *DOCUMENTATION*
spl/u-boot-spl.srec: spl/u-boot-spl FORCE
$(call if_changed,objcopy)
+%.scif: %.srec
+ $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
+
OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
- CONFIG_SYS_FMAN_FW_ADDR
The address in the storage device where the FMAN microcode is located. The
- meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+ meaning of this address depends on which CONFIG_SYS_QE_FMAN_FW_IN_xxx macro
is also specified.
- CONFIG_SYS_QE_FW_ADDR
The address in the storage device where the QE microcode is located. The
- meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+ meaning of this address depends on which CONFIG_SYS_QE_FMAN_FW_IN_xxx macro
is also specified.
- CONFIG_SYS_QE_FMAN_FW_LENGTH
select HAVE_PRIVATE_LIBGCC
select SYS_BOOT_GET_CMDLINE
select SYS_BOOT_GET_KBD
+ select SUPPORT_OF_CONTROL
config MICROBLAZE
bool "MicroBlaze architecture"
imply CMD_DM
imply CMD_POWEROFF
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+ imply USE_PREBOOT
help
Support for STM32MP SoC family developed by STMicroelectronics,
MPUs based on ARM cortex A core
ulong timer_get_boot_us(void)
{
+ if (!gd->arch.timer_rate_hz)
+ timer_init();
+
return lldiv(get_ticks(), gd->arch.timer_rate_hz / 1000000);
}
#size-cells = <1>;
model = "SOCFPGA Arria10 Dev Kit"; /* Bootloader setting: uboot.model */
- chosen {
- cff-file = "socfpga.rbf"; /* Bootloader setting: uboot.rbf_filename */
- };
-
/* Clock sources */
clocks {
#address-cells = <1>;
* address mapping : RBC
* Tc > + 85C : N
*/
-#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.43"
-#define DDR_MEM_SPEED 533
+#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.44"
+#define DDR_MEM_SPEED 533000
#define DDR_MEM_SIZE 0x20000000
#define DDR_MSTR 0x00041401
#define DDR_DX1DLLCR 0x40000000
#define DDR_DX1DQTR 0xFFFFFFFF
#define DDR_DX1DQSTR 0x3DB02000
-#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2GCR 0x0000CE80
#define DDR_DX2DLLCR 0x40000000
#define DDR_DX2DQTR 0xFFFFFFFF
#define DDR_DX2DQSTR 0x3DB02000
-#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3GCR 0x0000CE80
#define DDR_DX3DLLCR 0x40000000
#define DDR_DX3DQTR 0xFFFFFFFF
#define DDR_DX3DQSTR 0x3DB02000
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- */
-
-/* STM32MP157C ED1 and ED2 BOARD configuration
+ *
+ * STM32MP157C ED1 BOARD configuration
* 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
* Reference used NT5CC256M16DP-DI from NANYA
*
* timing mode optimized
* Scheduling/QoS options : type = 2
* address mapping : RBC
+ * Tc > + 85C : N
*/
-#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.36"
-#define DDR_MEM_SPEED 533
+#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.44"
+#define DDR_MEM_SPEED 533000
#define DDR_MEM_SIZE 0x40000000
#define DDR_MSTR 0x00040401
#define DDR_ADDRMAP11 0x00000000
#define DDR_ODTCFG 0x06000600
#define DDR_ODTMAP 0x00000001
-#define DDR_SCHED 0x00001201
+#define DDR_SCHED 0x00000C01
#define DDR_SCHED1 0x00000000
#define DDR_PERFHPR1 0x01000001
#define DDR_PERFLPR1 0x08000200
#define DDR_PCCFG 0x00000010
#define DDR_PCFGR_0 0x00010000
#define DDR_PCFGW_0 0x00000000
-#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS0_0 0x02100C03
#define DDR_PCFGQOS1_0 0x00800100
-#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS0_0 0x01100C03
#define DDR_PCFGWQOS1_0 0x01000200
#define DDR_PCFGR_1 0x00010000
#define DDR_PCFGW_1 0x00000000
-#define DDR_PCFGQOS0_1 0x02100B03
-#define DDR_PCFGQOS1_1 0x00800100
-#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
#define DDR_PCFGWQOS1_1 0x01000200
#define DDR_PGCR 0x01442E02
#define DDR_PTR0 0x0022AA5B
#define DDR_MR2 0x00000208
#define DDR_MR3 0x00000000
#define DDR_ODTCR 0x00010000
-#define DDR_ZQ0CR1 0x0000005B
+#define DDR_ZQ0CR1 0x00000038
#define DDR_DX0GCR 0x0000CE81
#define DDR_DX0DLLCR 0x40000000
#define DDR_DX0DQTR 0xFFFFFFFF
#define MACH_TYPE_ECIA 623
#define MACH_TYPE_CM4008 624
#define MACH_TYPE_P2001 625
-#define MACH_TYPE_TWISTER 626
#define MACH_TYPE_MUDSHARK 627
#define MACH_TYPE_HB2 628
#define MACH_TYPE_IQ80332 629
#define MACH_TYPE_VPNEXT_MPU 2747
#define MACH_TYPE_BCMRING_TABLET_V1 2748
#define MACH_TYPE_SGARM10 2749
-#define MACH_TYPE_CM_T3517 2750
#define MACH_TYPE_OMAP3_CPS 2751
#define MACH_TYPE_AXAR1500_RECEIVER 2752
#define MACH_TYPE_WBD222 2753
#define MACH_TYPE_AX8008 2999
#define MACH_TYPE_GNET_SGCE 3000
#define MACH_TYPE_PXWNAS_500_1000 3001
-#define MACH_TYPE_EA20 3002
#define MACH_TYPE_AWM2 3003
#define MACH_TYPE_TI8148EVM 3004
#define MACH_TYPE_SEABOARD 3005
#define MACH_TYPE_SGH_I710 3525
#define MACH_TYPE_INTEGREPROSCB 3526
#define MACH_TYPE_MONZA 3527
-#define MACH_TYPE_CALIMAIN 3528
#define MACH_TYPE_MX6Q_SABREAUTO 3529
#define MACH_TYPE_GMA01X 3530
#define MACH_TYPE_SBC51 3531
#define MACH_TYPE_TAISHAN 3653
#define MACH_TYPE_TOUCHLINK 3654
#define MACH_TYPE_STM32F103ZE 3655
-#define MACH_TYPE_MCX 3656
#define MACH_TYPE_STM_NMHDK_FLI7610 3657
#define MACH_TYPE_TOP28X 3658
#define MACH_TYPE_OKL4VP_MICROVISOR 3659
#define MACH_TYPE_IMXT_NAV 3829
#define MACH_TYPE_IMXT_FULL 3830
#define MACH_TYPE_AG09015 3831
-#define MACH_TYPE_AM3517_MT_VENTOUX 3832
#define MACH_TYPE_DP1ARM9 3833
#define MACH_TYPE_PICASSO_M 3834
#define MACH_TYPE_VIDEO_GADGET 3835
prompt "DaVinci board select"
optional
-config TARGET_IPAM390
- bool "IPAM390 board"
- select MACH_DAVINCI_DA850_EVM
- select SOC_DA850
- select SUPPORT_SPL
-
config TARGET_DA850EVM
bool "DA850 EVM board"
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
select SUPPORT_SPL
-config TARGET_EA20
- bool "EA20 board"
- select BOARD_LATE_INIT
- select MACH_DAVINCI_DA850_EVM
- select SOC_DA850
-
config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
select SOC_DA8XX
select SUPPORT_SPL
-config TARGET_CALIMAIN
- bool "Calimain board"
- select SOC_DA850
-
config TARGET_LEGOEV3
bool "LEGO MINDSTORMS EV3"
select MACH_DAVINCI_DA850_EVM
endif
-source "board/Barix/ipam390/Kconfig"
source "board/davinci/da8xxevm/Kconfig"
-source "board/davinci/ea20/Kconfig"
-source "board/omicron/calimain/Kconfig"
source "board/lego/ev3/Kconfig"
config SPL_LDSCRIPT
select DM_SERIAL
imply CMD_DM
-config TARGET_MT_VENTOUX
- bool "TeeJet Mt.Ventoux"
- select OMAP3_GPIO_4
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select DM
select OMAP3_GPIO_5
select OMAP3_GPIO_6 if LED_STATUS
-config TARGET_CM_T3517
- bool "CompuLab CM-T3517 boards"
- select OMAP3_GPIO_2
- select OMAP3_GPIO_5
- select OMAP3_GPIO_6 if LED_STATUS
-
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select DM
select OMAP3_GPIO_4
select OMAP3_GPIO_6
-config TARGET_ECO5PK
- bool "ECO5PK"
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_TRICORDER
bool "Tricorder"
select OMAP3_GPIO_2
-config TARGET_MCX
- bool "MCX"
- select BOARD_LATE_INIT
- select OMAP3_GPIO_2 if USB_EHCI_HCD
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_OMAP3_LOGIC
bool "OMAP3 Logic"
select BOARD_LATE_INIT
select OMAP3_GPIO_5
select OMAP3_GPIO_6
-config TARGET_TWISTER
- bool "Twister"
- select OMAP3_GPIO_2
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_OMAP3_CAIRO
bool "QUIPOS CAIRO"
select DM
default "omap3"
source "board/logicpd/am3517evm/Kconfig"
-source "board/teejet/mt_ventoux/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
-source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
source "board/logicpd/zoom1/Kconfig"
source "board/ti/am3517crane/Kconfig"
source "board/pandora/Kconfig"
-source "board/8dtech/eco5pk/Kconfig"
source "board/corscience/tricorder/Kconfig"
-source "board/htkw/mcx/Kconfig"
source "board/logicpd/omap3som/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/technexion/tao3530/Kconfig"
-source "board/technexion/twister/Kconfig"
source "board/quipos/cairo/Kconfig"
source "board/lg/sniper/Kconfig"
select PINCTRL
select PINCONF
select PINCTRL_PFC
+ select SUPPORT_SPL
imply CMD_FS_UUID
imply CMD_GPT
imply CMD_UUID
imply CMD_MMC_SWRITE if MMC
imply SUPPORT_EMMC_RPMB if MMC
+ imply SPL
+ imply SPL_BOARD_INIT
+ imply SPL_GZIP
+ imply SPL_LIBCOMMON_SUPPORT
+ imply SPL_LIBGENERIC_SUPPORT
+ imply SPL_SERIAL_SUPPORT
+ imply SPL_SYS_MALLOC_SIMPLE
+ imply SPL_TINY_MEMSET
+ imply SPL_YMODEM_SUPPORT
+ imply USE_TINY_PRINTF
config RZA1
prompt "Renesas ARM SoCs RZ/A1 (32bit)"
obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
obj-$(CONFIG_RCAR_GEN2) += lowlevel_init_ca15.o cpu_info-rcar.o
obj-$(CONFIG_RCAR_GEN3) += lowlevel_init_gen3.o cpu_info-rcar.o memmap-gen3.o
+
+OBJCOPYFLAGS_u-boot-spl.srec := -O srec
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) --gap-fill=0x00 $(OBJCOPYFLAGS) \
+ $(OBJCOPYFLAGS_$(@F)) $< $@
+
+spl/u-boot-spl.srec: spl/u-boot-spl FORCE
+ $(call if_changed,objcopy)
+
+ifneq ($(CONFIG_R8A77990)$(CONFIG_R8A77995),)
+#
+# The first 6 generate statements generate the R-Car Gen3 SCIF loader header.
+# The subsequent generate statements represent the following chunk of assembler
+# code, which copies the loaded data from 0xe6304030 to 0xe6318000. This is to
+# work around a limitation of the D3/E3 BootROM, which does not permit loading
+# to 0xe6318000 directly.
+#
+# mov x0, #0xe6000000
+# orr x0, x0, #0x00300000
+# orr x1, x0, #0x00004000
+# orr x1, x1, #0x00000030
+#
+# orr x2, x0, #0x00018000
+# mov x0, x2
+# mov x3, #0x7000
+#1: ldp x4, x5, [x1], #16
+#
+# stp x4, x5, [x2], #16
+# subs x3, x3, #16
+# b.ge 1b
+# br x0
+#
+quiet_cmd_srec_cat = SRECCAT $@
+ cmd_srec_cat = srec_cat -output $@ -M 8 $< -M 8 \
+ -offset -0x13fd0 \
+ -Output_Block_Size 16 \
+ -generate 0xe6300400 0xe6300404 -l-e-constant 0x0 4 \
+ -generate 0xe630048c 0xe6300490 -l-e-constant 0x0 4 \
+ -generate 0xe63005d4 0xe63005d8 -l-e-constant 0xe6304000 4 \
+ -generate 0xe63006e4 0xe63006e8 -l-e-constant $2 4 \
+ -generate 0xe6301154 0xe6301158 -l-e-constant 0xe6304000 4 \
+ -generate 0xe6301264 0xe6301268 -l-e-constant $2 4 \
+ -generate 0xe6304000 0xe6304004 -l-e-constant 0xd2bcc000 4 \
+ -generate 0xe6304004 0xe6304008 -l-e-constant 0xb26c0400 4 \
+ -generate 0xe6304008 0xe630400c -l-e-constant 0xb2720001 4 \
+ -generate 0xe630400c 0xe6304010 -l-e-constant 0xb27c0421 4 \
+ -generate 0xe6304010 0xe6304014 -l-e-constant 0xb2710402 4 \
+ -generate 0xe6304014 0xe6304018 -l-e-constant 0xaa0203e0 4 \
+ -generate 0xe6304018 0xe630401c -l-e-constant 0xd28e0003 4 \
+ -generate 0xe630401c 0xe6304020 -l-e-constant 0xa8c11424 4 \
+ -generate 0xe6304020 0xe6304024 -l-e-constant 0xa8811444 4 \
+ -generate 0xe6304024 0xe6304028 -l-e-constant 0xf1004063 4 \
+ -generate 0xe6304028 0xe630402c -l-e-constant 0x54ffffaa 4 \
+ -generate 0xe630402c 0xe6304030 -l-e-constant 0xd61f0000 4
+else
+quiet_cmd_srec_cat = SRECCAT $@
+ cmd_srec_cat = srec_cat -output $@ -M 8 $< -M 8 \
+ -Output_Block_Size 16 \
+ -generate 0xe6300400 0xe6300404 -l-e-constant 0x0 4 \
+ -generate 0xe630048c 0xe6300490 -l-e-constant 0x0 4 \
+ -generate 0xe63005d4 0xe63005d8 -l-e-constant $(CONFIG_SPL_TEXT_BASE) 4 \
+ -generate 0xe63006e4 0xe63006e8 -l-e-constant $2 4 \
+ -generate 0xe6301154 0xe6301158 -l-e-constant $(CONFIG_SPL_TEXT_BASE) 4 \
+ -generate 0xe6301264 0xe6301268 -l-e-constant $2 4
+endif
+
+spl/u-boot-spl.scif: spl/u-boot-spl.srec spl/u-boot-spl.bin
+ $(call cmd,srec_cat,$(shell wc -c spl/u-boot-spl.bin | awk '{printf("0x%08x\n",$$1)}'))
+
+# if srec_cat is present build u-boot-spl.scif by default
+has_srec_cat = $(call try-run,srec_cat -VERSion,y,n)
+ALL-$(has_srec_cat) += u-boot-spl.scif
+CLEAN_FILES += u-boot-spl.scif
#endif
void do_bridge_reset(int enable, unsigned int mask);
+void socfpga_pl310_clear(void);
#endif /* _MISC_H_ */
/* Disable the L2 cache */
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
+
+void socfpga_pl310_clear(void)
+{
+ u32 mask = 0xff, ena = 0;
+
+ icache_enable();
+
+ /* Disable the L2 cache */
+ clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+
+ writel(0x0, &pl310->pl310_tag_latency_ctrl);
+ writel(0x10, &pl310->pl310_data_latency_ctrl);
+
+ /* enable BRESP, instruction and data prefetch, full line of zeroes */
+ setbits_le32(&pl310->pl310_aux_ctrl,
+ L310_AUX_CTRL_DATA_PREFETCH_MASK |
+ L310_AUX_CTRL_INST_PREFETCH_MASK |
+ L310_SHARED_ATT_OVERRIDE_ENABLE);
+
+ /* Enable the L2 cache */
+ ena = readl(&pl310->pl310_ctrl);
+ ena |= L2X0_CTRL_EN;
+
+ /*
+ * Invalidate the PL310 L2 cache. Keep the invalidation code
+ * entirely in L1 I-cache to avoid any bus traffic through
+ * the L2.
+ */
+ asm volatile(
+ ".align 5 \n"
+ " b 3f \n"
+ "1: str %1, [%4] \n"
+ " dsb \n"
+ " isb \n"
+ " str %0, [%2] \n"
+ " dsb \n"
+ " isb \n"
+ "2: ldr %0, [%2] \n"
+ " cmp %0, #0 \n"
+ " bne 2b \n"
+ " str %0, [%3] \n"
+ " dsb \n"
+ " isb \n"
+ " b 4f \n"
+ "3: b 1b \n"
+ "4: nop \n"
+ : "+r"(mask), "+r"(ena)
+ : "r"(&pl310->pl310_inv_way),
+ "r"(&pl310->pl310_cache_sync), "r"(&pl310->pl310_ctrl)
+ : "memory", "cc");
+
+ /* Disable the L2 cache */
+ clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
#endif
#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
socfpga_init_security_policies();
socfpga_sdram_remap_zero();
+ socfpga_pl310_clear();
/* Assert reset to all except L4WD0 and L4TIMER0 */
socfpga_per_reset_all();
#include <common.h>
#include <asm/io.h>
-#include <asm/pl310.h>
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <image.h>
DECLARE_GLOBAL_DATA_PTR;
-static struct pl310_regs *const pl310 =
- (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
static const struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
}
#endif
-static void socfpga_pl310_clear(void)
-{
- u32 mask = 0xff, ena = 0;
-
- icache_enable();
-
- /* Disable the L2 cache */
- clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-
- writel(0x111, &pl310->pl310_tag_latency_ctrl);
- writel(0x121, &pl310->pl310_data_latency_ctrl);
-
- /* enable BRESP, instruction and data prefetch, full line of zeroes */
- setbits_le32(&pl310->pl310_aux_ctrl,
- L310_AUX_CTRL_DATA_PREFETCH_MASK |
- L310_AUX_CTRL_INST_PREFETCH_MASK |
- L310_SHARED_ATT_OVERRIDE_ENABLE);
-
- /* Enable the L2 cache */
- ena = readl(&pl310->pl310_ctrl);
- ena |= L2X0_CTRL_EN;
-
- /*
- * Invalidate the PL310 L2 cache. Keep the invalidation code
- * entirely in L1 I-cache to avoid any bus traffic through
- * the L2.
- */
- asm volatile(
- ".align 5 \n"
- " b 3f \n"
- "1: str %1, [%4] \n"
- " dsb \n"
- " isb \n"
- " str %0, [%2] \n"
- " dsb \n"
- " isb \n"
- "2: ldr %0, [%2] \n"
- " cmp %0, #0 \n"
- " bne 2b \n"
- " str %0, [%3] \n"
- " dsb \n"
- " isb \n"
- " b 4f \n"
- "3: b 1b \n"
- "4: nop \n"
- : "+r"(mask), "+r"(ena)
- : "r"(&pl310->pl310_inv_way),
- "r"(&pl310->pl310_cache_sync), "r"(&pl310->pl310_ctrl)
- : "memory", "cc");
-
- /* Disable the L2 cache */
- clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
-
void board_init_f(ulong dummy)
{
const struct cm_config *cm_default_cfg = cm_get_default_config();
select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
select SPL_SYSCON
+ imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
+ imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
config SYS_SOC
default "stm32mp"
+config SYS_MALLOC_LEN
+ default 0x2000000
+
+config ENV_SIZE
+ default 0x1000
+
config TARGET_STM32MP1
bool "Support stm32mp1xx"
select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
select STM32_RCC
select STM32_RESET
select SYS_ARCH_TIMER
+ imply BOOTCOUNT_LIMIT
+ imply BOOTSTAGE
+ imply CMD_BOOTCOUNT
+ imply CMD_BOOTSTAGE
imply SYSRESET_PSCI if STM32MP1_TRUSTED
imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
help
Partition on the second MMC to load U-Boot from when the MMC is being
used in raw mode
+config BOOTSTAGE_STASH_ADDR
+ default 0xC3000000
+
+if BOOTCOUNT_LIMIT
+config SYS_BOOTCOUNT_SINGLEWORD
+ default y
+
+# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
+config SYS_BOOTCOUNT_ADDR
+ default 0x5C00A154
+endif
+
if DEBUG_UART
config DEBUG_UART_BOARD_INIT
#include <dm.h>
#include <misc.h>
#include <asm/io.h>
-#include <linux/iopoll.h>
#include <asm/arch/stm32mp1_smc.h>
#include <linux/arm-smccc.h>
+#include <linux/iopoll.h>
#define BSEC_OTP_MAX_VALUE 95
#ifndef __MACH_STM32MP_DDR_H_
#define __MACH_STM32MP_DDR_H_
-int board_ddr_power_init(void);
+/* DDR power initializations */
+enum ddr_type {
+ STM32MP_DDR3,
+ STM32MP_LPDDR2,
+ STM32MP_LPDDR3,
+};
+
+int board_ddr_power_init(enum ddr_type ddr_type);
#endif
#define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
#define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(20)
+#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(21)
#define TAMP_BOOT_MODE_MASK GENMASK(15, 8)
#define TAMP_BOOT_MODE_SHIFT 8
return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
}
-static void __secure stm32mp_smp_kick_all_cpus(void)
+static void __secure stm32mp_raise_sgi0(int cpu)
{
u32 gic_dist_addr;
gic_dist_addr = stm32mp_get_gicd_base_address();
- /* kick all CPUs (except this one) by writing to GICD_SGIR */
- writel(1U << 24, gic_dist_addr + GICD_SGIR);
+ /* ask cpu with SGI0 */
+ writel((BIT(cpu) << 16), gic_dist_addr + GICD_SGIR);
}
void __secure psci_arch_cpu_entry(void)
u32 cpu = psci_get_cpu_id();
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON);
+
+ /* reset magic in TAMP register */
+ writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER);
}
int __secure psci_features(u32 function_id, u32 psci_fid)
if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON)
return ARM_PSCI_RET_ALREADY_ON;
+ /* reset magic in TAMP register */
+ if (readl(TAMP_BACKUP_MAGIC_NUMBER))
+ writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER);
+ /*
+ * ROM code need a first SGI0 after core reset
+ * core is ready when magic is set to 0 in ROM code
+ */
+ while (readl(TAMP_BACKUP_MAGIC_NUMBER))
+ stm32mp_raise_sgi0(cpu);
+
/* store target PC and context id*/
psci_save(cpu, pc, context_id);
writel(BOOT_API_A7_CORE0_MAGIC_NUMBER,
TAMP_BACKUP_MAGIC_NUMBER);
- stm32mp_smp_kick_all_cpus();
+ /* Generate an IT to start the core */
+ stm32mp_raise_sgi0(cpu);
return ARM_PSCI_RET_SUCCESS;
}
# processor family
config MCF520x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF52x2
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF523x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF530x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5301x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF532x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF537x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5441x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5445x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5227x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF547x_8x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
# processor type
# ccflags-y += -DET_DEBUG
extra-y = start.o
-obj-y = cpu.o speed.o cpu_init.o interrupts.o
+obj-y = cpu.o speed.o cpu_init.o interrupts.o dspi.o
#include <asm/rtc.h>
#include <linux/compiler.h>
+void cfspi_port_conf(void)
+{
+ gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+
+ out_8(&gpio->par_dspi,
+ GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT |
+ GPIO_PAR_DSPI_SCK_SCK);
+}
+
/*
* Breath some life into the CPU...
*
#endif
icache_enable();
+
+ cfspi_port_conf();
}
/*
break;
}
}
-
-#ifdef CONFIG_CF_DSPI
-void cfspi_port_conf(void)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- out_8(&gpio->par_dspi,
- GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT |
- GPIO_PAR_DSPI_SCK_SCK);
-}
-
-int cfspi_claim_bus(uint bus, uint cs)
-{
- dspi_t *dspi = (dspi_t *) MMAP_DSPI;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
- return -1;
-
- /* Clear FIFO and resume transfer */
- clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
-
- switch (cs) {
- case 0:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_UNMASK);
- setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
- break;
- case 2:
- clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK);
- setbits_8(&gpio->par_timer, GPIO_PAR_TIMER_T2IN_DSPIPCS2);
- break;
- }
-
- return 0;
-}
-
-void cfspi_release_bus(uint bus, uint cs)
-{
- dspi_t *dspi = (dspi_t *) MMAP_DSPI;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- /* Clear FIFO */
- clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
-
- switch (cs) {
- case 0:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
- break;
- case 2:
- clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK);
- break;
- }
-}
-#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019
+ * Angelo Dureghello <angleo@sysam.it>
+ *
+ * CPU specific dspi routines
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_CF_DSPI
+void dspi_chip_select(int cs)
+{
+ struct gpio *gpio = (struct gpio *)MMAP_GPIO;
+
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_UNMASK);
+ setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
+ break;
+ case 2:
+ clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK);
+ setbits_8(&gpio->par_timer, GPIO_PAR_TIMER_T2IN_DSPIPCS2);
+ break;
+ }
+}
+
+void dspi_chip_unselect(int cs)
+{
+ struct gpio *gpio = (struct gpio *)MMAP_GPIO;
+
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
+ break;
+ case 2:
+ clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK);
+ break;
+ }
+}
+#endif /* CONFIG_CF_DSPI */
clr.l %sp@-
/* run low-level board init code (from flash) */
- bsr board_init_f
+ move.l #board_init_f, %a1
+ jsr (%a1)
/* board_init_f() does not return */
# ccflags-y += -DET_DEBUG
extra-y = start.o
-obj-y = cpu.o speed.o cpu_init.o interrupts.o pci.o
+obj-y = cpu.o speed.o cpu_init.o interrupts.o pci.o dspi.o
#endif
}
+#ifdef CONFIG_CF_DSPI
+void cfspi_port_conf(void)
+{
+ gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+
+#ifdef CONFIG_MCF5445x
+ out_8(&gpio->par_dspi,
+ GPIO_PAR_DSPI_SIN_SIN |
+ GPIO_PAR_DSPI_SOUT_SOUT |
+ GPIO_PAR_DSPI_SCK_SCK);
+#endif
+
+#ifdef CONFIG_MCF5441x
+ pm_t *pm = (pm_t *)MMAP_PM;
+
+ out_8(&gpio->par_dspi0,
+ GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
+ GPIO_PAR_DSPI0_SCK_DSPI0SCK);
+ out_8(&gpio->srcr_dspiow, 3);
+
+ /* DSPI0 */
+ out_8(&pm->pmcr0, 23);
+#endif
+}
+#endif
+
/*
* Breath some life into the CPU...
*
GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
+#ifdef CONFIG_CF_SPI
+ cfspi_port_conf();
+#endif
+
#ifdef CONFIG_SYS_FSL_I2C
out_be16(&gpio->par_feci2c,
GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
}
#endif
-#ifdef CONFIG_CF_DSPI
-void cfspi_port_conf(void)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-#ifdef CONFIG_MCF5445x
- out_8(&gpio->par_dspi,
- GPIO_PAR_DSPI_SIN_SIN |
- GPIO_PAR_DSPI_SOUT_SOUT |
- GPIO_PAR_DSPI_SCK_SCK);
-#endif
-
-#ifdef CONFIG_MCF5441x
- pm_t *pm = (pm_t *) MMAP_PM;
-
- out_8(&gpio->par_dspi0,
- GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
- GPIO_PAR_DSPI0_SCK_DSPI0SCK);
- out_8(&gpio->srcr_dspiow, 3);
-
- /* DSPI0 */
- out_8(&pm->pmcr0, 23);
-#endif
-}
-
-int cfspi_claim_bus(uint bus, uint cs)
-{
- dspi_t *dspi = (dspi_t *) MMAP_DSPI;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
- return -1;
-
- /* Clear FIFO and resume transfer */
- clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
-
-#ifdef CONFIG_MCF5445x
- switch (cs) {
- case 0:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
- setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
- break;
- case 1:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
- setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
- break;
- case 2:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
- setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
- break;
- case 3:
- clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
- setbits_8(&gpio->par_dma, GPIO_PAR_DMA_DACK0_PCS3);
- break;
- case 5:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
- setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
- break;
- }
-#endif
-
-#ifdef CONFIG_MCF5441x
- switch (cs) {
- case 0:
- clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK);
- setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0);
- break;
- case 1:
- clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
- setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
- break;
- }
-#endif
-
- return 0;
-}
-
-void cfspi_release_bus(uint bus, uint cs)
-{
- dspi_t *dspi = (dspi_t *) MMAP_DSPI;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- /* Clear FIFO */
- clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
-
-#ifdef CONFIG_MCF5445x
- switch (cs) {
- case 0:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
- break;
- case 1:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
- break;
- case 2:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
- break;
- case 3:
- clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
- break;
- case 5:
- clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
- break;
- }
-#endif
-
-#ifdef CONFIG_MCF5441x
- if (cs == 1)
- clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
-#endif
-}
-
-#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019
+ * Angelo Dureghello <angleo@sysam.it>
+ *
+ * CPU specific dspi routines
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_CF_DSPI
+void dspi_chip_select(int cs)
+{
+ struct gpio *gpio = (struct gpio *)MMAP_GPIO;
+
+#ifdef CONFIG_MCF5445x
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
+ setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
+ break;
+ case 1:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
+ setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
+ break;
+ case 2:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
+ setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
+ break;
+ case 3:
+ clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
+ setbits_8(&gpio->par_dma, GPIO_PAR_DMA_DACK0_PCS3);
+ break;
+ case 5:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
+ setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
+ break;
+ }
+#endif
+#ifdef CONFIG_MCF5441x
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi0,
+ ~GPIO_PAR_DSPI0_PCS0_MASK);
+ setbits_8(&gpio->par_dspi0,
+ GPIO_PAR_DSPI0_PCS0_DSPI0PCS0);
+ break;
+ case 1:
+ clrbits_8(&gpio->par_dspiow,
+ GPIO_PAR_DSPIOW_DSPI0PSC1);
+ setbits_8(&gpio->par_dspiow,
+ GPIO_PAR_DSPIOW_DSPI0PSC1);
+ break;
+ }
+#endif
+}
+
+void dspi_chip_unselect(int cs)
+{
+ struct gpio *gpio = (struct gpio *)MMAP_GPIO;
+
+#ifdef CONFIG_MCF5445x
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
+ break;
+ case 1:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
+ break;
+ case 2:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
+ break;
+ case 3:
+ clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
+ break;
+ case 5:
+ clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
+ break;
+ }
+#endif
+#ifdef CONFIG_MCF5441x
+ if (cs == 1)
+ clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+#endif
+}
+#endif /* CONFIG_CF_DSPI */
* then (and always) gd struct space will be reserved
*/
move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
+ move.l #board_init_f_alloc_reserve, %a1
+ jsr (%a1)
/* update stack and frame-pointers */
move.l %d0, %sp
/* initialize reserved area */
move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+ move.l #board_init_f_init_reserve, %a1
+ jsr (%a1)
/* run low-level CPU init code (from flash) */
jbsr cpu_init_f
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
- . = ALIGN(256);
+ . = ALIGN(4);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
- . = ALIGN(256);
+ . = ALIGN(4);
__init_end = .;
+ _end = .;
+
__bss_start = .;
.bss (NOLOAD) :
{
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5208.dtsi"
+
+/ {
+ model = "Freescale M5208EVBE";
+ compatible = "fsl,M5208EVBE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5227x.dtsi"
+
+/ {
+ model = "Freescale M52277EVB";
+ compatible = "fsl,M52277EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5227x.dtsi"
+
+/ {
+ model = "Freescale M52277_stmicro";
+ compatible = "fsl,M52277_stmicro";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf523x.dtsi"
+
+/ {
+ model = "Freescale M5235EVB";
+ compatible = "fsl,M5235EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf523x.dtsi"
+
+/ {
+ model = "Freescale M5235EVB_Flash32";
+ compatible = "fsl,M5235EVB_Flash32";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5249.dtsi"
+
+/ {
+ model = "Freescale M5249EVB";
+ compatible = "fsl,M5249EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5253.dtsi"
+
+/ {
+ model = "Freescale M5253DEMO";
+ compatible = "fsl,M5253DEMO";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5272.dtsi"
+
+/ {
+ model = "Freescale M5272C3";
+ compatible = "fsl,M5272C3";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5275.dtsi"
+
+/ {
+ model = "Freescale M5275EVB";
+ compatible = "fsl,M5275EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5282.dtsi"
+
+/ {
+ model = "Freescale M5282EVB";
+ compatible = "fsl,M5282EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5301x.dtsi"
+
+/ {
+ model = "Freescale M53017EVB";
+ compatible = "fsl,M53017EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5329.dtsi"
+
+/ {
+ model = "Freescale M5329AFEE";
+ compatible = "fsl,M5329AFEE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5329.dtsi"
+
+/ {
+ model = "Freescale M5329BFEE";
+ compatible = "fsl,M5329BFEE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf537x.dtsi"
+
+/ {
+ model = "Freescale M5373EVB";
+ compatible = "fsl,M5373EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR";
+ compatible = "fsl,M54418TWR";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_nand_mii";
+ compatible = "fsl,M54418TWR_nand_mii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_nand_rmii";
+ compatible = "fsl,M54418TWR_nand_rmii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_nand_rmii_lowfreq";
+ compatible = "fsl,M54418TWR_nand_rmii_lowfreq";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_serial_mii";
+ compatible = "fsl,M54418TWR_serial_mii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_serial_rmii";
+ compatible = "fsl,M54418TWR_serial_rmii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54451EVB";
+ compatible = "fsl,M54451EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54451EVB_stmicro";
+ compatible = "fsl,M54451EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB";
+ compatible = "fsl,M54455EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_a66";
+ compatible = "fsl,M54455EVB_a66";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_i66";
+ compatible = "fsl,M54455EVB_i66";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_intel";
+ compatible = "fsl,M5275EVB_intel";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_stm33";
+ compatible = "fsl,M5275EVB_stm33";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475AFE";
+ compatible = "fsl,M5475AFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475BFE";
+ compatible = "fsl,M5475BFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475CFE";
+ compatible = "fsl,M5475CFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475DFE";
+ compatible = "fsl,M5475DFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475EFE";
+ compatible = "fsl,M5475EFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475FFE";
+ compatible = "fsl,M5475FFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475GFE";
+ compatible = "fsl,M5475GFE";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485AFE";
+ compatible = "fsl,M5485AFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485BFE";
+ compatible = "fsl,M5485BFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485CFE";
+ compatible = "fsl,M5485CFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485DFE";
+ compatible = "fsl,M5485DFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485EFE";
+ compatible = "fsl,M5485EFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485FFE";
+ compatible = "fsl,M5485FFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485GFE";
+ compatible = "fsl,M5485GFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485HFE";
+ compatible = "fsl,M5485HFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_M52277EVB) += M52277EVB.dtb \
+ M52277EVB_stmicro.dtb
+dtb-$(CONFIG_TARGET_M5235EVB) += M5235EVB.dtb \
+ M5235EVB_Flash32.dtb
+dtb-$(CONFIG_TARGET_COBRA5272) += cobra5272.dtb
+dtb-$(CONFIG_TARGET_EB_CPU5282) += eb_cpu5282.dtb \
+ eb_cpu5282_internal.dtb
+dtb-$(CONFIG_TARGET_M5208EVBE) += M5208EVBE.dtb
+dtb-$(CONFIG_TARGET_M5249EVB) += M5249EVB.dtb
+dtb-$(CONFIG_TARGET_M5253DEMO) += M5253DEMO.dtb
+dtb-$(CONFIG_TARGET_M5272C3) += M5272C3.dtb
+dtb-$(CONFIG_TARGET_M5275EVB) += M5275EVB.dtb
+dtb-$(CONFIG_TARGET_M5282EVB) += M5282EVB.dtb
+dtb-$(CONFIG_TARGET_ASTRO_MCF5373L) += astro_mcf5373l.dtb
+dtb-$(CONFIG_TARGET_M53017EVB) += M53017EVB.dtb
+dtb-$(CONFIG_TARGET_M5329EVB) += M5329AFEE.dtb M5329BFEE.dtb
+dtb-$(CONFIG_TARGET_M5373EVB) += M5373EVB.dtb
+dtb-$(CONFIG_TARGET_M54418TWR) += M54418TWR.dtb \
+ M54418TWR_nand_mii.dtb \
+ M54418TWR_nand_rmii.dtb \
+ M54418TWR_serial_mii.dtb \
+ M54418TWR_serial_rmii.dtb \
+ M54418TWR_nand_rmii_lowfreq.dtb
+dtb-$(CONFIG_TARGET_M54451EVB) += M54451EVB.dtb \
+ M54451EVB_stmicro.dtb
+dtb-$(CONFIG_TARGET_M54455EVB) += M54455EVB.dtb \
+ M54455EVB_intel.dtb \
+ M54455EVB_stm33.dtb \
+ M54455EVB_a66.dtb \
+ M54455EVB_i66.dtb
+dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb
+dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
+dtb-$(CONFIG_TARGET_M5475EVB) += M5475AFE.dtb \
+ M5475BFE.dtb \
+ M5475CFE.dtb \
+ M5475DFE.dtb \
+ M5475EFE.dtb \
+ M5475FFE.dtb \
+ M5475GFE.dtb
+dtb-$(CONFIG_TARGET_M5485EVB) += M5485AFE.dtb \
+ M5485BFE.dtb \
+ M5485CFE.dtb \
+ M5485DFE.dtb \
+ M5485EFE.dtb \
+ M5485FFE.dtb \
+ M5485GFE.dtb \
+ M5485HFE.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5307.dtsi"
+
+/ {
+ model = "Sysam AMCORE";
+ compatible = "sysam,AMCORE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf537x.dtsi"
+
+/ {
+ model = "Astro mcf5373l";
+ compatible = "astro,mcf5373l";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5272.dtsi"
+
+/ {
+ model = "Cobra 5272";
+ compatible = "cobra,M5272";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5282.dtsi"
+
+/ {
+ model = "BuS eb_cpuM5282";
+ compatible = "bus,eb_cpuM5282";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5282.dtsi"
+
+/ {
+ model = "BuS eb_cpu5282_internals";
+ compatible = "bus,eb_cpu5282_internals";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5208";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5227x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi@fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf523x";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar@4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5249";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart@1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5253";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart@1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart3: uart@c00 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xc00 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5271";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar@4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5272";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart@100 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x100 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@140 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x140 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5275";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar@4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5282";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar@4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5301x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi@fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5307";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MBAR */
+ mbar: mbar@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart@1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5329";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5329";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5441x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ uart3: uart@fc06c000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc06c000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi@fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi1: dspi@fc03c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc03c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi2: dspi@ec038000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xec038000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi3: dspi@ec03c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xec03c00 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5445x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart@fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart@fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi@fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf54x5";
+
+ aliases {
+ /* TO DO, clarify on serial, this SoC seems to have SPC and
+ * no UARTS.
+ */
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x80000000 0x10000>;
+ reg = <0x80000000 0x10000>;
+
+ dspi0: dspi@8a00 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8a00 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Sysam stmark2";
+ compatible = "sysam,stmark2";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ spi-mode = <3>;
+ status = "okay";
+
+ flash: is25lp128@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <60000000>;
+ reg = <1>;
+ };
+};
/* Bit definitions and macros for DRFDR group */
#define DSPI_RFDR_RXDATA(x) (((x)&0x0000FFFF))
+/* Architecture-related operations */
+void dspi_chip_select(int cs);
+void dspi_chip_unselect(int cs);
+
#endif /* __DSPI_H__ */
select DM_SERIAL
imply DM_SPI
imply DM_SPI_FLASH
- select ARCH_MISC_INIT
select MIPS_TUNE_24KC
select OF_CONTROL
select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_LITTLE_ENDIAN
+ select SYS_MALLOC_CLEAR_ON_INIT
select SYSRESET
config ARCH_JZ47XX
return 0;
}
-
-int arch_misc_init(void)
-{
- /*
- * It has been noticed, that sometimes the d-cache is not in a
- * "clean-state" when U-Boot is running on MT7688. This was
- * detected when using the ethernet driver (which uses d-cache)
- * and a TFTP command does not complete. Flushing the complete
- * d-cache (again?) here seems to fix this issue.
- */
- flush_dcache_range(gd->bd->bi_memstart,
- gd->bd->bi_memstart + gd->ram_size - 1);
-
- return 0;
-}
select PHYS_64BIT
select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
select FSL_DDR_INTERACTIVE
- imply CMD_SATA
config TARGET_T2080RDB
bool "Support T2080RDB"
select SUPPORT_SPL
select PHYS_64BIT
imply CMD_SATA
+ imply FSL_SATA
imply PANIC_HANG
config TARGET_T2081QDS
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_IFC
- imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_T2081
bool
device_type = "open-pic";
clock-frequency = <0x0>;
};
+
+ esdhc: esdhc@114000 {
+ compatible = "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2 0 0>;
+ clock-frequency = <0>;
+ sdhci,auto-cmd12;
+ bus-width = <4>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ };
+
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+ phy_type = "utmi";
+ };
+
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+ sata0: sata@220000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x220000 0x1000>;
+ interrupts = <68 0x2 0 0>;
+ sata-number = <0x0>;
+ sata-fpdma = <0x0>;
+ };
+
+ sata1: sata@221000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x221000 0x1000>;
+ interrupts = <69 0x2 0 0>;
+ sata-number = <0x0>;
+ sata-fpdma = <0x0>;
+ };
};
};
+++ /dev/null
-if TARGET_ECO5PK
-
-config SYS_BOARD
- default "eco5pk"
-
-config SYS_VENDOR
- default "8dtech"
-
-config SYS_CONFIG_NAME
- default "eco5pk"
-
-endif
+++ /dev/null
-ECO5PK BOARD
-M: Raphael Assenat <raph@8d.com>
-S: Maintained
-F: board/8dtech/eco5pk/
-F: include/configs/eco5pk.h
-F: configs/eco5pk_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Adapted from ti/evm/Makefile
-
-obj-y := eco5pk.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board
- *
- * Based on am3517evm.c
- *
- * Copyright (C) 2011-2012 8D Technologies inc.
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <u-boot/crc.h>
-#include <asm/mach-types.h>
-#include "eco5pk.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- gpio_request(30, "RESOUT");
- gpio_direction_output(30, 1);
- return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_ECO5_PK();
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * eco5.h - Header file for the 8D Technologies ECO5 board.
- *
- * Based on am3517evm.h
- * Based on ti/evm/evm.h
- *
- * Copyright (C) 2011 8D Technologies inc.
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-
-#ifndef _ECO5PK_H__
-#define _ECO5PK_H__
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "ECO5 Board",
- "NAND",
-};
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_ECO5_PK() \
- /* SDRC */\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_CKE0), (M0)) \
- MUX_VAL(CP(SDRC_CKE1), (M0)) \
- MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
- /* GPMC */\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) \
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \
- /* - ETH_nRESET*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \
- /* DSS */\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) \
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) \
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
- /* CAMERA */\
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
- /* - CAM_RESET*/\
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
- /* MMC */\
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \
- /* McBSP */\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \
- \
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\
- /* - LCD_INI*/\
- MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\
- /* - LCD_ENVDD */\
- MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\
- /* - LCD_QVGA/nVGA */\
- MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\
- /* - LCD_RESB */\
- /* UART */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
- \
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
- /* I2C */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
- /* McSPI */\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\
- /* - LAN_INTR*/\
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \
- \
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
- /* LCD_EN_BACKLIGHT */\
- MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) \
- /* CCDC */\
- MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \
- MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \
- MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
- /* RMII */\
- MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
- MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
- MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
- MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
- /* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
- /* HSUSB */\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
- /* HDQ */\
- MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \
- /* Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
- /* SYS_nRESWARM */\
- MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
- /* - GPIO30 */\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\
- /* - PEN_IRQ */\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8 */\
- /* - VIO_1V8*/\
- MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
- \
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
- /* JTAG */\
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \
- /* ETK (ES2 onwards) */\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \
- /* Die to Die */\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0))
-
-#endif
+++ /dev/null
-if TARGET_IPAM390
-
-config SYS_BOARD
- default "ipam390"
-
-config SYS_VENDOR
- default "Barix"
-
-config SYS_CONFIG_NAME
- default "ipam390"
-
-endif
+++ /dev/null
-IPAM390 BOARD
-M: Heiko Schocher <hs@denx.de>
-S: Maintained
-F: board/Barix/ipam390/
-F: include/configs/ipam390.h
-F: configs/ipam390_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-
-obj-y += ipam390.o
+++ /dev/null
-Summary
-=======
-The README is for the boot procedure on the ipam390 board
-
-In the context of U-Boot, the board is booted in three stages. The initial
-bootloader which executes upon reset is the ROM Boot Loader (RBL) and sits
-in the internal ROM. The RBL initializes the internal memory and then
-depending on the exact board and pin configurations will initialize another
-controller (such as NAND) to continue the boot process by loading
-the secondary program loader (SPL). The SPL will initialize the system
-further (some clocks, SDRAM). As on this board is used the falcon boot
-mode, now 2 ways are possible depending on the GPIO 7_14 input pin,
-connected with the "soft reset switch"
-
-If this pin is logical 1 (high level):
-spl code starts the kernel image without delay
-
-If this pin is logical 0 (low level):
-spl code starts the u-boot image
-
-AIS is an image format defined by TI for the images that are to be loaded
-to memory by the RBL. The image is divided into a series of sections and
-the image's entry point is specified. Each section comes with meta data
-like the target address the section is to be copied to and the size of the
-section, which is used by the RBL to load the image. At the end of the
-image the RBL jumps to the image entry point. The AIS format allows for
-other things such as programming the clocks and SDRAM if the header is
-programmed for it. We do not take advantage of this and instead use SPL as
-it allows for additional flexibility (run-time detect of board revision,
-loading the next image from a different media, etc).
-
-Compilation
-===========
-run "tools/buildman/buildman -k ipam390" in the u-boot source tree.
-Once this build completes you will have a ../current/ipam390/u-boot.ais file
-that needs to be written to the nand flash.
-
-Flashing the images to NAND
-==========================
-The AIS image can be written to NAND flash using the following commands.
-Assuming that the network is configured and enabled and the u-boot.ais file
-is tftp'able.
-
-U-Boot > print upd_uboot
-upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;nand write c0000000 20000 ${filesize}
-U-Boot >
-U-Boot > run upd_uboot
-Using DaVinci-EMAC device
-TFTP from server 192.168.1.1; our IP address is 192.168.20.71
-Filename '/tftpboot/ipam390/u-boot.ais'.
-Load address: 0xc0000000
-Loading: ##################################
- 1.5 MiB/s
-done
-Bytes transferred = 493716 (78894 hex)
-
-NAND erase.part: device 0 offset 0x20000, size 0x160000
-Erasing at 0x160000 -- 100% complete.
-OK
-
-NAND write: device 0 offset 0x20000, size 0x78894
- 493716 bytes written: OK
-U-Boot >
-
-Recovery
-========
-
-In the case of a "bricked" board, you need to use the TI tools found
-here[1] to create an uboot-uart-ais.bin file
-
-- cd to the u-boot source tree
-
-- compile the u-boot for the ipam390 board:
-$ tools/buildman/buildman -k ipam390
-
- -> Now we shall have u-boot.bin
-
-- Create u-boot-uart-ais.bin
-$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \
- -o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
-
-Note: The ipam390-ais-uart.cfg is found in the board directory
-for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg
-
-- We can now run bootloader on IPAM390 via UART using the command below:
-
-$ mono ./slh_OMAP-L138.exe -waitForDevice -v -p /dev/tty.UC-232AC uboot-uart-ais.bin
-NOTE: Do not cancel the command execution! The command takes 20+ seconds
-to upload u-boot over serial and run it!
-Outcome:
-Waiting for the OMAP-L138...
-(AIS Parse): Read magic word 0x41504954.
-(AIS Parse): Waiting for BOOTME... (power on or reset target now)
-(AIS Parse): BOOTME received!
-(AIS Parse): Performing Start-Word Sync...
-(AIS Parse): Performing Ping Opcode Sync...
-(AIS Parse): Processing command 0: 0x5853590D.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Executing function...
-(AIS Parse): Processing command 1: 0x5853590D.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Executing function...
-(AIS Parse): Processing command 2: 0x5853590D.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Executing function...
-(AIS Parse): Processing command 3: 0x5853590D.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Executing function...
-(AIS Parse): Processing command 4: 0x5853590D.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Executing function...
-(AIS Parse): Processing command 5: 0x58535901.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Loading section...
-(AIS Parse): Loaded 326516-Byte section to address 0xC1080000.
-(AIS Parse): Processing command 6: 0x58535906.
-(AIS Parse): Performing Opcode Sync...
-(AIS Parse): Performing jump and close...
-(AIS Parse): AIS complete. Jump to address 0xC1080000.
-(AIS Parse): Waiting for DONE...
-(AIS Parse): Boot completed successfully.
-
-Operation completed successfully.
-
-Falcon Bootmode (boot linux without booting U-Boot)
-===================================================
-
-The Falcon Mode extends this way allowing to start the Linux kernel directly
-from SPL. A new command is added to U-Boot to prepare the parameters that SPL
-must pass to the kernel, using ATAGS or Device Tree.
-
-In normal mode, these parameters are generated each time before
-loading the kernel, passing to Linux the address in memory where
-the parameters can be read.
-With Falcon Mode, this snapshot can be saved into persistent storage and SPL is
-informed to load it before running the kernel.
-
-To boot the kernel, these steps under a Falcon-aware U-Boot are required:
-
-1. Boot the board into U-Boot.
-Use the "spl export" command to generate the kernel parameters area or the DT.
-U-Boot runs as when it boots the kernel, but stops before passing the control
-to the kernel.
-
-Here the command sequence for the ipam390 board:
-- load the linux kernel image into ram:
-
-U-Boot > nand read c0100000 2 200000 400000
-
-NAND read: device 0 offset 0x200000, size 0x400000
- 4194304 bytes read: OK
-
-- generate the bootparms image:
-
-U-Boot > spl export atags c0100000
-## Booting kernel from Legacy Image at c0100000 ...
- Image Name: Linux-3.5.1
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2504280 Bytes = 2.4 MiB
- Load Address: c0008000
- Entry Point: c0008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
-subcommand not supported
-subcommand not supported
-Argument image is now in RAM at: 0xc0000100
-
-- copy the bootparms image into nand:
-
-U-Boot > mtdparts
-
-device nand0 <davinci_nand.0>, # parts = 6
- #: name size offset mask_flags
- 0: u-boot-env 0x00020000 0x00000000 0
- 1: u-boot 0x00160000 0x00020000 0
- 2: bootparms 0x00020000 0x00180000 0
- 3: factory-info 0x00060000 0x001a0000 0
- 4: kernel 0x00400000 0x00200000 0
- 5: rootfs 0x07a00000 0x00600000 0
-
-active partition: nand0,0 - (u-boot-env) 0x00020000 @ 0x00000000
-
-defaults:
-mtdids : nand0=davinci_nand.0
-mtdparts: mtdparts=davinci_nand.0:128k(u-boot-env),1408k(u-boot),128k(bootparms),384k(factory-info),4M(kernel),-(rootfs)
-U-Boot > nand erase.part bootparms
-
-NAND erase.part: device 0 offset 0x180000, size 0x20000
-Erasing at 0x180000 -- 100% complete.
-OK
-U-Boot > nand write c0000100 180000 20000
-
-NAND write: device 0 offset 0x180000, size 0x20000
- 131072 bytes written: OK
-U-Boot >
-
-You can use also the predefined U-Boot Environment variable "setbootparms",
-which will do all the above steps in one command:
-
-U-Boot > print setbootparms
-setbootparms=nand read c0100000 200000 400000;spl export atags c0100000;nand erase.part bootparms;nand write c0000100 180000 20000
-U-Boot > run setbootparms
-
-NAND read: device 0 offset 0x200000, size 0x400000
- 4194304 bytes read: OK
-## Booting kernel from Legacy Image at c0100000 ...
- Image Name: Linux-3.5.1
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2504280 Bytes = 2.4 MiB
- Load Address: c0008000
- Entry Point: c0008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
-subcommand not supported
-subcommand not supported
-Argument image is now in RAM at: 0xc0000100
-
-NAND erase.part: device 0 offset 0x180000, size 0x20000
-Erasing at 0x180000 -- 100% complete.
-OK
-
-NAND write: device 0 offset 0x180000, size 0x20000
- 131072 bytes written: OK
-U-Boot >
-
-Links
-=====
-[1]
- http://sourceforge.net/projects/dvflashutils/files/OMAP-L138/
+++ /dev/null
-; General settings that can be overwritten in the host code
-; that calls the AISGen library.
-[General]
-
-; Can be 8 or 16 - used in emifa
-busWidth=8
-
-; SPIMASTER,I2CMASTER,EMIFA,NAND,EMAC,UART,PCI,HPI,USB,MMC_SD,VLYNQ,RAW
-BootMode=UART
-
-; 8,16,24 - used for SPI,I2C
-;AddrWidth=8
-
-; NO_CRC,SECTION_CRC,SINGLE_CRC
-crcCheckType=NO_CRC
-
-; This section allows setting the PLL0 system clock with a
-; specified multiplier and divider as shown. The clock source
-; can also be chosen for internal or external.
-; |------24|------16|-------8|-------0|
-; PLL0CFG0: | CLKMODE| PLLM | PREDIV | POSTDIV|
-; PLL0CFG1: | RSVD | PLLDIV1| PLLDIV3| PLLDIV7|
-;[PLL0CONFIG]
-;PLL0CFG0 = 0x00180001
-;PLL0CFG1 = 0x00000205
-
-[PLLANDCLOCKCONFIG]
-PLL0CFG0 = 0x00180001
-PLL0CFG1 = 0x00000205
-PERIPHCLKCFG = 0x00000051
-
-; This section allows setting up the PLL1. Usually this will
-; take place as part of the EMIF3a DDR setup. The format of
-; the input args is as follows:
-; |------24|------16|-------8|-------0|
-; PLL1CFG0: | PLLM| POSTDIV| PLLDIV1| PLLDIV2|
-; PLL1CFG1: | RSVD | PLLDIV3|
-[PLL1CONFIG]
-PLL1CFG0 = 0x18010001
-PLL1CFG1 = 0x00000002
-
-; This section lets us configure the peripheral interface
-; of the current booting peripheral (I2C, SPI, or UART).
-; Use with caution. The format of the PERIPHCLKCFG field
-; is as follows:
-; SPI: |------24|------16|-------8|-------0|
-; | RSVD |PRESCALE|
-;
-; I2C: |------24|------16|-------8|-------0|
-; | RSVD |PRESCALE| CLKL | CLKH |
-;
-; UART: |------24|------16|-------8|-------0|
-; | RSVD | OSR | DLH | DLL |
-[PERIPHCLKCFG]
-PERIPHCLKCFG = 0x00000051
-
-; This section can be used to configure the PLL1 and the EMIF3a registers
-; for starting the DDR2 interface.
-; See PLL1CONFIG section for the format of the PLL1CFG fields.
-; |------24|------16|-------8|-------0|
-; PLL1CFG0: | PLL1CFG |
-; PLL1CFG1: | PLL1CFG |
-; DDRPHYC1R: | DDRPHYC1R |
-; SDCR: | SDCR |
-; SDTIMR: | SDTIMR |
-; SDTIMR2: | SDTIMR2 |
-; SDRCR: | SDRCR |
-; CLK2XSRC: | CLK2XSRC |
-[EMIF3DDR]
-PLL1CFG0 = 0x18010001
-PLL1CFG1 = 0x00000002
-DDRPHYC1R = 0x000000C2
-SDCR = 0x0017C432
-SDTIMR = 0x26922A09
-SDTIMR2 = 0x4414C722
-SDRCR = 0x00000498
-CLK2XSRC = 0x00000000
-
-; This section can be used to configure the EMIFA to use
-; CS0 as an SDRAM interface. The fields required to do this
-; are given below.
-; |------24|------16|-------8|-------0|
-; SDBCR: | SDBCR |
-; SDTIMR: | SDTIMR |
-; SDRSRPDEXIT: | SDRSRPDEXIT |
-; SDRCR: | SDRCR |
-; DIV4p5_CLK_ENABLE: | DIV4p5_CLK_ENABLE |
-;[EMIF25SDRAM]
-;SDBCR = 0x00004421
-;SDTIMR = 0x42215810
-;SDRSRPDEXIT = 0x00000009
-;SDRCR = 0x00000410
-;DIV4p5_CLK_ENABLE = 0x00000001
-
-; This section can be used to configure the async chip selects
-; of the EMIFA (CS2-CS5). The fields required to do this
-; are given below.
-; |------24|------16|-------8|-------0|
-; A1CR: | A1CR |
-; A2CR: | A2CR |
-; A3CR: | A3CR |
-; A4CR: | A4CR |
-; NANDFCR: | NANDFCR |
-;[EMIF25ASYNC]
-;A1CR = 0x00000000
-;A2CR = 0x00000000
-;A3CR = 0x00000000
-;A4CR = 0x00000000
-;NANDFCR = 0x00000000
-[EMIF25ASYNC]
-A1CR = 0x00000000
-A2CR = 0x04202110
-A3CR = 0x00000000
-A4CR = 0x00000000
-NANDFCR = 0x00000012
-
-; This section should be used in place of PLL0CONFIG when
-; the I2C, SPI, or UART modes are being used. This ensures that
-; the system PLL and the peripheral's clocks are changed together.
-; See PLL0CONFIG section for the format of the PLL0CFG fields.
-; See PERIPHCLKCFG section for the format of the CLKCFG field.
-; |------24|------16|-------8|-------0|
-; PLL0CFG0: | PLL0CFG |
-; PLL0CFG1: | PLL0CFG |
-; PERIPHCLKCFG: | CLKCFG |
-;[PLLANDCLOCKCONFIG]
-;PLL0CFG0 = 0x00180001
-;PLL0CFG1 = 0x00000205
-;PERIPHCLKCFG = 0x00010032
-
-; This section should be used to setup the power state of modules
-; of the two PSCs. This section can be included multiple times to
-; allow the configuration of any or all of the device modules.
-; |------24|------16|-------8|-------0|
-; LPSCCFG: | PSCNUM | MODULE | PD | STATE |
-;[PSCCONFIG]
-;LPSCCFG=
-
-; This section allows setting of a single PINMUX register.
-; This section can be included multiple times to allow setting
-; as many PINMUX registers as needed.
-; |------24|------16|-------8|-------0|
-; REGNUM: | regNum |
-; MASK: | mask |
-; VALUE: | value |
-;[PINMUX]
-;REGNUM = 5
-;MASK = 0x00FF0000
-;VALUE = 0x00880000
-
-; No Params required - simply include this section for the fast boot
-; function to be called
-;[FASTBOOT]
-
-; This section allows setting up the PLL1. Usually this will
-; take place as part of the EMIF3a DDR setup. The format of
-; the input args is as follows:
-; |------24|------16|-------8|-------0|
-; PLL1CFG0: | PLLM| POSTDIV| PLLDIV1| PLLDIV2|
-; PLL1CFG1: | RSVD | PLLDIV3|
-;[PLL1CONFIG]
-;PLL1CFG0 = 0x15010001
-;PLL1CFG1 = 0x00000002
-
-; This section can be used to configure the PLL1 and the EMIF3a registers
-; for starting the DDR2 interface on ARM-boot D800K002 devices.
-; |------24|------16|-------8|-------0|
-; DDRPHYC1R: | DDRPHYC1R |
-; SDCR: | SDCR |
-; SDTIMR: | SDTIMR |
-; SDTIMR2: | SDTIMR2 |
-; SDRCR: | SDRCR |
-; CLK2XSRC: | CLK2XSRC |
-;[ARM_EMIF3DDR_PATCHFXN]
-;DDRPHYC1R = 0x000000C2
-;SDCR = 0x0017C432
-;SDTIMR = 0x26922A09
-;SDTIMR2 = 0x4414C722
-;SDRCR = 0x00000498
-;CLK2XSRC = 0x00000000
-
-; This section can be used to configure the PLL1 and the EMIF3a registers
-; for starting the DDR2 interface on DSP-boot D800K002 devices.
-; |------24|------16|-------8|-------0|
-; DDRPHYC1R: | DDRPHYC1R |
-; SDCR: | SDCR |
-; SDTIMR: | SDTIMR |
-; SDTIMR2: | SDTIMR2 |
-; SDRCR: | SDRCR |
-; CLK2XSRC: | CLK2XSRC |
-;[DSP_EMIF3DDR_PATCHFXN]
-;DDRPHYC1R = 0x000000C4
-;SDCR = 0x08134632
-;SDTIMR = 0x26922A09
-;SDTIMR2 = 0x0014C722
-;SDRCR = 0x00000492
-;CLK2XSRC = 0x00000000
-
-;[INPUTFILE]
-;FILENAME=u-boot.bin
-;LOADADDRESS=0xC1080000
-;ENTRYPOINTADDRESS=0xC1080000
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- * Based on:
- * U-Boot:board/davinci/da8xxevm/da850evm.c
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on da830evm.c. Original Copyrights follow:
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <netdev.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <hwconfig.h>
-#include <bootstage.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define HAS_RMII 1
-#else
-#define HAS_RMII 0
-#endif
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-void dsp_lpsc_on(unsigned domain, unsigned int id)
-{
- dv_reg_p mdstat, mdctl, ptstat, ptcmd;
- struct davinci_psc_regs *psc_regs;
-
- psc_regs = davinci_psc0_regs;
- mdstat = &psc_regs->psc0.mdstat[id];
- mdctl = &psc_regs->psc0.mdctl[id];
- ptstat = &psc_regs->ptstat;
- ptcmd = &psc_regs->ptcmd;
-
- while (*ptstat & (0x1 << domain))
- ;
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- *ptcmd = 0x1 << domain;
-
- while (*ptstat & (0x1 << domain))
- ;
- while ((*mdstat & 0x1f) != 0x03)
- ; /* Probably an overkill... */
-}
-
-static void dspwake(void)
-{
- unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE;
- u32 val;
-
- /* if the device is ARM only, return */
- if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10)
- return;
-
- if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL))
- return;
-
- *resetvect++ = 0x1E000; /* DSP Idle */
- /* clear out the next 10 words as NOP */
- memset(resetvect, 0, sizeof(unsigned) * 10);
-
- /* setup the DSP reset vector */
- writel(DAVINCI_L3CBARAM_BASE, HOST1CFG);
-
- dsp_lpsc_on(1, DAVINCI_LPSC_GEM);
- val = readl(PSC0_MDCTL + (15 * 4));
- val |= 0x100;
- writel(val, (PSC0_MDCTL + (15 * 4)));
-}
-
-int misc_init_r(void)
-{
- dspwake();
- return 0;
-}
-
-static const struct pinmux_config gpio_pins[] = {
- /* GP7[14] selects bootmode*/
- { pinmux(16), 8, 3 }, /* GP7[14] */
-};
-
-const struct pinmux_resource pinmuxes[] = {
-#ifdef CONFIG_DRIVER_TI_EMAC
- PINMUX_ITEM(emac_pins_mdio),
-#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
- PINMUX_ITEM(emac_pins_rmii),
-#else
- PINMUX_ITEM(emac_pins_mii),
-#endif
-#endif
- PINMUX_ITEM(uart2_pins_txrx),
- PINMUX_ITEM(uart2_pins_rtscts),
- PINMUX_ITEM(uart0_pins_txrx),
- PINMUX_ITEM(uart0_pins_rtscts),
-#ifdef CONFIG_NAND_DAVINCI
- PINMUX_ITEM(emifa_pins_cs3),
- PINMUX_ITEM(emifa_pins_nand),
-#endif
- PINMUX_ITEM(gpio_pins),
-};
-
-const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
-
-const struct lpsc_resource lpsc[] = {
- { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
- { DAVINCI_LPSC_EMAC }, /* image download */
- { DAVINCI_LPSC_UART2 }, /* console */
- { DAVINCI_LPSC_UART0 }, /* console */
- { DAVINCI_LPSC_GPIO },
-};
-
-const int lpsc_size = ARRAY_SIZE(lpsc);
-
-#ifndef CONFIG_DA850_EVM_MAX_CPU_CLK
-#define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000
-#endif
-
-#define REV_AM18X_EVM 0x100
-
-/*
- * get_board_rev() - setup to pass kernel board revision information
- * Returns:
- * bit[0-3] Maximum cpu clock rate supported by onboard SoC
- * 0000b - 300 MHz
- * 0001b - 372 MHz
- * 0010b - 408 MHz
- * 0011b - 456 MHz
- */
-u32 get_board_rev(void)
-{
- char *s;
- u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
- u32 rev = 0;
-
- s = env_get("maxcpuclk");
- if (s)
- maxcpuclk = simple_strtoul(s, NULL, 10);
-
- if (maxcpuclk >= 456000000)
- rev = 3;
- else if (maxcpuclk >= 408000000)
- rev = 2;
- else if (maxcpuclk >= 372000000)
- rev = 1;
-#ifdef CONFIG_DA850_AM18X_EVM
- rev |= REV_AM18X_EVM;
-#endif
- return rev;
-}
-
-int board_early_init_f(void)
-{
- /*
- * Power on required peripherals
- * ARM does not have access by default to PSC0 and PSC1
- * assuming here that the DSP bootloader has set the IOPU
- * such that PSC access is available to ARM
- */
- if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
- return 1;
-
- return 0;
-}
-
-int board_init(void)
-{
- irq_init();
-
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* setup the SUSPSRC for ARM to control emulation suspend */
- writel(readl(&davinci_syscfg_regs->suspsrc) &
- ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
- DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
- DAVINCI_SYSCFG_SUSPSRC_UART0),
- &davinci_syscfg_regs->suspsrc);
-
- /* configure pinmux settings */
- if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
- return 1;
-
-#ifdef CONFIG_DRIVER_TI_EMAC
- davinci_emac_mii_mode_sel(HAS_RMII);
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
- /* enable the console UART */
- writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
- DAVINCI_UART_PWREMU_MGMT_UTRST),
-#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
- &davinci_uart0_ctrl_regs->pwremu_mgmt);
-#else
- &davinci_uart2_ctrl_regs->pwremu_mgmt);
-#endif
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
- if (!davinci_emac_initialize()) {
- printf("Error: Ethernet init failed!\n");
- return -1;
- }
-
- return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-static int init_led(int gpio, char *name, int val)
-{
- int ret;
-
- ret = gpio_request(gpio, name);
- if (ret)
- return -1;
- ret = gpio_direction_output(gpio, val);
- if (ret)
- return -1;
-
- return gpio;
-}
-
-#define LED_ON 0
-#define LED_OFF 1
-
-#if !defined(CONFIG_SPL_BUILD)
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress(int status)
-{
- static int red;
- static int green;
-
- if (red == 0)
- red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
- if (red != CONFIG_IPAM390_GPIO_LED_RED)
- return;
- if (green == 0)
- green = init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green",
- LED_OFF);
- if (green != CONFIG_IPAM390_GPIO_LED_GREEN)
- return;
-
- switch (status) {
- case BOOTSTAGE_ID_RUN_OS:
- /*
- * set normal state
- * LED Red : on
- * LED green: off
- */
- gpio_set_value(red, LED_ON);
- gpio_set_value(green, LED_OFF);
- break;
- case BOOTSTAGE_ID_MAIN_LOOP:
- /*
- * U-Boot operation
- * LED Red : on
- * LED green: on
- */
- gpio_set_value(red, LED_ON);
- gpio_set_value(green, LED_ON);
- break;
- }
-}
-#endif
-#endif
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
- int ret;
- int bootmode = 0;
-
- /*
- * GP7[14] selects bootmode:
- * 1: boot linux
- * 0: boot u-boot
- * if error accessing gpio boot U-Boot
- *
- * SPL bootmode
- * 0: boot linux
- * 1: boot u-boot
- */
- ret = gpio_request(CONFIG_IPAM390_GPIO_BOOTMODE , "bootmode");
- if (ret)
- bootmode = 1;
- if (!bootmode) {
- ret = gpio_direction_input(CONFIG_IPAM390_GPIO_BOOTMODE);
- if (ret)
- bootmode = 1;
- }
- if (!bootmode)
- ret = gpio_get_value(CONFIG_IPAM390_GPIO_BOOTMODE);
- if (!bootmode)
- if (ret == 0)
- bootmode = 1;
- /*
- * LED red : on
- * LED green: off
- */
- init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
- init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
- return bootmode;
-}
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- */
-
-MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
- LENGTH = CONFIG_SPL_MAX_FOOTPRINT }
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- __start = .;
- *(.vectors)
- arch/arm/cpu/arm926ejs/start.o (.text*)
- *(.text*)
- } >.sram
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
-
- . = ALIGN(4);
- .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
-
- . = ALIGN(4);
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
- } >.sram
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.bss*)
- . = ALIGN(4);
- __bss_end = .;
- } >.sram
-
- __image_copy_end = .;
-
- .end :
- {
- *(.__end)
- } >.sram
-}
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2018 Cisco Systems, Inc.
+ * (C) Copyright 2019 Synamedia
*
* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/bootm.h>
-#include <mach/sdhci.h>
#include <mach/timer.h>
#include <mmc.h>
#include <fdtdec.h>
*/
}
-static const phys_addr_t bcmstb_sdhci_address(u32 alias_index)
-{
- int node = 0;
- int ret = 0;
- char sdhci[16] = { 0 };
- const void *fdt = gd->fdt_blob;
- const char *path = NULL;
- struct fdt_resource resource = { 0 };
-
- if (!fdt) {
- printf("%s: Invalid gd->fdt_blob\n", __func__);
- return 0;
- }
-
- node = fdt_path_offset(fdt, "/aliases");
- if (node < 0) {
- printf("%s: Failed to find /aliases node\n", __func__);
- return 0;
- }
-
- sprintf(sdhci, "sdhci%d", alias_index);
- path = fdt_getprop(fdt, node, sdhci, NULL);
- if (!path) {
- printf("%s: Failed to find alias for %s\n", __func__, sdhci);
- return 0;
- }
-
- node = fdt_path_offset(fdt, path);
- if (node < 0) {
- printf("%s: Failed to resolve BCMSTB SDHCI alias\n", __func__);
- return 0;
- }
-
- ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
- "host", &resource);
- if (ret) {
- printf("%s: Failed to read BCMSTB SDHCI host resource\n",
- __func__);
- return 0;
- }
-
- return resource.start;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- phys_addr_t sdhci_base_address = 0;
-
- sdhci_base_address = bcmstb_sdhci_address(CONFIG_BCMSTB_SDHCI_INDEX);
-
- if (!sdhci_base_address) {
- sdhci_base_address = BCMSTB_SDHCI_BASE;
- printf("%s: Assuming BCMSTB SDHCI address: 0x%p\n",
- __func__, (void *)sdhci_base_address);
- }
-
- debug("BCMSTB SDHCI base address: 0x%p\n", (void *)sdhci_base_address);
-
- bcmstb_sdhci_init(sdhci_base_address);
-
- return 0;
-}
-
int timer_init(void)
{
gd->arch.timer_rate_hz = readl(BCMSTB_TIMER_FREQUENCY);
+++ /dev/null
-if TARGET_CM_T3517
-
-config SYS_BOARD
- default "cm_t3517"
-
-config SYS_VENDOR
- default "compulab"
-
-config SYS_CONFIG_NAME
- default "cm_t3517"
-
-endif
+++ /dev/null
-CM_T3517 BOARD
-M: Igor Grinberg <grinberg@compulab.co.il>
-S: Maintained
-F: board/compulab/cm_t3517/
-F: include/configs/cm_t3517.h
-F: configs/cm_t3517_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
-#
-# Authors: Igor Grinberg <grinberg@compulab.co.il>
-
-obj-y += cm_t3517.o mux.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Igor Grinberg <grinberg@compulab.co.il>
- */
-
-#include <common.h>
-#include <environment.h>
-#include <status_led.h>
-#include <net.h>
-#include <netdev.h>
-#include <usb.h>
-#include <mmc.h>
-#include <linux/compiler.h>
-#include <linux/usb/musb.h>
-
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/am35x_def.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/musb.h>
-#include <asm/omap_musb.h>
-#include <asm/ehci-omap.h>
-
-#include "../common/common.h"
-#include "../common/eeprom.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "CM-T3517 board",
- "NAND 128/512M",
-};
-
-#ifdef CONFIG_USB_MUSB_AM35X
-static struct musb_hdrc_config cm_t3517_musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
-};
-
-static struct omap_musb_board_data cm_t3517_musb_board_data = {
- .set_phy_power = am35x_musb_phy_power,
- .clear_irq = am35x_musb_clear_irq,
- .reset = am35x_musb_reset,
-};
-
-static struct musb_hdrc_platform_data cm_t3517_musb_pdata = {
-#if defined(CONFIG_USB_MUSB_HOST)
- .mode = MUSB_HOST,
-#elif defined(CONFIG_USB_MUSB_GADGET)
- .mode = MUSB_PERIPHERAL,
-#else
-#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
-#endif
- .config = &cm_t3517_musb_config,
- .power = 250,
- .platform_ops = &am35x_ops,
- .board_data = &cm_t3517_musb_board_data,
-};
-
-static void cm_t3517_musb_init(void)
-{
- /*
- * Set up USB clock/mode in the DEVCONF2 register.
- * USB2.0 PHY reference clock is 13 MHz
- */
- clrsetbits_le32(&am35x_scm_general_regs->devconf2,
- CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE,
- CONF2_REFFREQ_13MHZ | CONF2_SESENDEN |
- CONF2_VBDTCTEN | CONF2_DATPOL);
-
- if (!musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data,
- (void *)AM35XX_IPSS_USBOTGSS_BASE))
- printf("Failed initializing AM35x MUSB!\n");
-}
-#else
-static inline void am3517_evm_musb_init(void) {}
-#endif
-
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
- status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
-#endif
-
- cm_t3517_musb_init();
-
- return 0;
-}
-
-/*
- * Routine: get_board_rev
- * Description: read system revision
- */
-u32 get_board_rev(void)
-{
- return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS);
-};
-
-int misc_init_r(void)
-{
- cl_print_pcb_info();
- omap_die_id_display();
-
- return 0;
-}
-
-#if defined(CONFIG_MMC)
-#define SB_T35_CD_GPIO 144
-#define SB_T35_WP_GPIO 59
-
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO);
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONTROL_EFUSE_EMAC_LSB 0x48002380
-#define CONTROL_EFUSE_EMAC_MSB 0x48002384
-
-static int am3517_get_efuse_enetaddr(u8 *enetaddr)
-{
- u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB);
- u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB);
-
- enetaddr[0] = (u8)((msb >> 16) & 0xff);
- enetaddr[1] = (u8)((msb >> 8) & 0xff);
- enetaddr[2] = (u8)(msb & 0xff);
- enetaddr[3] = (u8)((lsb >> 16) & 0xff);
- enetaddr[4] = (u8)((lsb >> 8) & 0xff);
- enetaddr[5] = (u8)(lsb & 0xff);
-
- return is_valid_ethaddr(enetaddr);
-}
-
-static inline int cm_t3517_init_emac(bd_t *bis)
-{
- int ret = cpu_eth_init(bis);
-
- if (ret > 0)
- return ret;
-
- printf("Failed initializing EMAC! ");
- return 0;
-}
-#else /* !CONFIG_DRIVER_TI_EMAC */
-static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; }
-static inline int cm_t3517_init_emac(bd_t *bis) { return 0; }
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-/*
- * Routine: handle_mac_address
- * Description: prepare MAC address for on-board Ethernet.
- */
-static int cm_t3517_handle_mac_address(void)
-{
- unsigned char enetaddr[6];
- int ret;
-
- ret = eth_env_get_enetaddr("ethaddr", enetaddr);
- if (ret)
- return 0;
-
- ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
- if (ret) {
- ret = am3517_get_efuse_enetaddr(enetaddr);
- if (ret)
- return ret;
- }
-
- if (!is_valid_ethaddr(enetaddr))
- return -1;
-
- return eth_env_set_enetaddr("ethaddr", enetaddr);
-}
-
-#define SB_T35_ETH_RST_GPIO 164
-
-/*
- * Routine: board_eth_init
- * Description: initialize module and base-board Ethernet chips
- */
-int board_eth_init(bd_t *bis)
-{
- int rc = 0, rc1 = 0;
-
- rc1 = cm_t3517_handle_mac_address();
- if (rc1)
- printf("No MAC address found! ");
-
- rc1 = cm_t3517_init_emac(bis);
- if (rc1 > 0)
- rc++;
-
- rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE,
- NULL, SB_T35_ETH_RST_GPIO);
- if (rc1 > 0)
- rc++;
-
- return rc;
-}
-
-#ifdef CONFIG_USB_EHCI_OMAP
-static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-#define CM_T3517_USB_HUB_RESET_GPIO 152
-#define SB_T35_USB_HUB_RESET_GPIO 98
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst");
- cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
-
- return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(void)
-{
- cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO);
- cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
-
- return omap_ehci_hcd_stop();
-}
-#endif /* CONFIG_USB_EHCI_OMAP */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Igor Grinberg <grinberg@compulab.co.il>
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-
-void set_muxconf_regs(void)
-{
- /* SDRC */
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7));
-
- /* GPMC */
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
-
- /* SB-T35 Ethernet */
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0));
- /* DVI enable */
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPIO_54*/
- /* DataImage backlight */
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/
-
- /* SB-T35 SD/MMC WP GPIO59 */
- MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
- /* SB-T35 Audio Enable GPIO61 */
- MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0));
- /* SB-T35 Ethernet IRQ GPIO65 */
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)); /*GPIO_65*/
-
- /* UART3 Console */
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0));
- /* RTC V3020 nCS GPIO163 */
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/
- /* SB-T35 Ethernet nRESET GPIO164 */
- MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)); /*GPIO_164*/
-
- /* SB-T35 SD/MMC CD GPIO144 */
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/
- /* WIFI nRESET GPIO145 */
- MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/
- /* USB1 PHY Reset GPIO 146 */
- MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/
- /* USB2 PHY Reset GPIO 147 */
- MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/
-
- /* MMC1 */
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0));
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0));
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0));
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0));
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0));
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0));
-
- /* DSS */
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0));
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0));
-
- /* I2C */
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0));
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0));
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
-
- /* SB-T35 USB HUB Reset GPIO98 */
- MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/
- /* CM-T3517 USB HUB Reset GPIO152 */
- MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
-
- /* RMII */
- MUX_VAL(CP(RMII_MDIO_DATA), (IEN | PTU | EN | M0));
- MUX_VAL(CP(RMII_MDIO_CLK), (M0));
- MUX_VAL(CP(RMII_RXD0), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(RMII_RXD1), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(RMII_RXER), (IEN | PTD | DIS | M0));
- MUX_VAL(CP(RMII_TXD0), (IDIS | M0));
- MUX_VAL(CP(RMII_TXD1), (IDIS | M0));
- MUX_VAL(CP(RMII_TXEN), (IDIS | M0));
- MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTU | DIS | M0));
-
- /* Green LED GPIO186 */
- MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/
-
- /* SPI */
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
- MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/
- /* LCD reset GPIO157 */
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/
-
- /* RTC V3020 CS Enable GPIO160 */
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/
- /* SB-T35 LVDS Transmitter SHDN GPIO162 */
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)); /*GPIO_162*/
-
- /* USB0 - mUSB */
- MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0));
- /* USB1 EHCI */
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
- /* USB2 EHCI */
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/
- MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
- MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
-
- /* SYS_BOOT */
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/
-}
#define layout_legacy layout_unknown
#endif
-#if defined(CONFIG_CM_T3X) || defined(CONFIG_CM_T3517)
+#if defined(CONFIG_CM_T3X)
struct eeprom_field layout_v1[12] = {
{ "Major Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
{ "Minor Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
+++ /dev/null
-if TARGET_EA20
-
-config SYS_BOARD
- default "ea20"
-
-config SYS_VENDOR
- default "davinci"
-
-config SYS_CONFIG_NAME
- default "ea20"
-
-endif
+++ /dev/null
-EA20 BOARD
-M: Stefano Babic <sbabic@denx.de>
-S: Maintained
-F: board/davinci/ea20/
-F: include/configs/ea20.h
-F: configs/ea20_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-
-obj-y += ea20.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de
- *
- * Based on da850evm.c, original Copyrights follow:
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on da830evm.c. Original Copyrights follow:
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/gpio.h>
-#include "../../../drivers/video/da8xx-fb.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const struct da8xx_panel lcd_panel = {
- /* Casio COM57H531x */
- .name = "Casio_COM57H531x",
- .width = 640,
- .height = 480,
- .hfp = 12,
- .hbp = 144,
- .hsw = 30,
- .vfp = 10,
- .vbp = 35,
- .vsw = 3,
- .pxl_clk = 25000000,
- .invert_pxl_clk = 0,
-};
-
-static const struct display_panel disp_panel = {
- QVGA,
- 16,
- 16,
- COLOR_ACTIVE,
-};
-
-static const struct lcd_ctrl_config lcd_cfg = {
- &disp_panel,
- .ac_bias = 255,
- .ac_bias_intrpt = 0,
- .dma_burst_sz = 16,
- .bpp = 16,
- .fdd = 255,
- .tft_alt_mode = 0,
- .stn_565_mode = 0,
- .mono_8bit_mode = 0,
- .invert_line_clock = 1,
- .invert_frm_clock = 1,
- .sync_edge = 0,
- .sync_ctrl = 1,
- .raster_order = 0,
-};
-
-/* SPI0 pin muxer settings */
-static const struct pinmux_config spi1_pins[] = {
- { pinmux(5), 1, 1 },
- { pinmux(5), 1, 2 },
- { pinmux(5), 1, 4 },
- { pinmux(5), 1, 5 }
-};
-
-/* I2C pin muxer settings */
-static const struct pinmux_config i2c_pins[] = {
- { pinmux(4), 2, 2 },
- { pinmux(4), 2, 3 }
-};
-
-/* UART0 pin muxer settings */
-static const struct pinmux_config uart_pins[] = {
- { pinmux(3), 2, 7 },
- { pinmux(3), 2, 6 },
- { pinmux(3), 2, 4 },
- { pinmux(3), 2, 5 }
-};
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define HAS_RMII 1
-static const struct pinmux_config emac_pins[] = {
- { pinmux(14), 8, 2 },
- { pinmux(14), 8, 3 },
- { pinmux(14), 8, 4 },
- { pinmux(14), 8, 5 },
- { pinmux(14), 8, 6 },
- { pinmux(14), 8, 7 },
- { pinmux(15), 8, 1 },
- { pinmux(4), 8, 0 },
- { pinmux(4), 8, 1 }
-};
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-const struct pinmux_config nand_pins[] = {
- { pinmux(7), 1, 0}, /* CS2 */
- { pinmux(7), 0, 1}, /* CS3 in three state*/
- { pinmux(7), 1, 4 }, /* EMA_WE */
- { pinmux(7), 1, 5 }, /* EMA_OE */
- { pinmux(9), 1, 0 }, /* EMA_D[7] */
- { pinmux(9), 1, 1 }, /* EMA_D[6] */
- { pinmux(9), 1, 2 }, /* EMA_D[5] */
- { pinmux(9), 1, 3 }, /* EMA_D[4] */
- { pinmux(9), 1, 4 }, /* EMA_D[3] */
- { pinmux(9), 1, 5 }, /* EMA_D[2] */
- { pinmux(9), 1, 6 }, /* EMA_D[1] */
- { pinmux(9), 1, 7 }, /* EMA_D[0] */
- { pinmux(12), 1, 5 }, /* EMA_A[2] */
- { pinmux(12), 1, 6 }, /* EMA_A[1] */
- { pinmux(6), 1, 0 } /* EMA_CLK */
-};
-#endif
-
-const struct pinmux_config gpio_pins[] = {
- { pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/
- { pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/
- { pinmux(13), 8, 3 }, /* GPIO6[12] U0_SW1 on EA20-00101_2*/
- { pinmux(19), 8, 5 }, /* GPIO6[1] DISP_ON */
- { pinmux(14), 8, 1 } /* GPIO6[6] LCD_B_PWR*/
-};
-
-const struct pinmux_config lcd_pins[] = {
- { pinmux(17), 2, 1 }, /* LCD_D_0 */
- { pinmux(17), 2, 0 }, /* LCD_D_1 */
- { pinmux(16), 2, 7 }, /* LCD_D_2 */
- { pinmux(16), 2, 6 }, /* LCD_D_3 */
- { pinmux(16), 2, 5 }, /* LCD_D_4 */
- { pinmux(16), 2, 4 }, /* LCD_D_5 */
- { pinmux(16), 2, 3 }, /* LCD_D_6 */
- { pinmux(16), 2, 2 }, /* LCD_D_7 */
- { pinmux(18), 2, 1 }, /* LCD_D_8 */
- { pinmux(18), 2, 0 }, /* LCD_D_9 */
- { pinmux(17), 2, 7 }, /* LCD_D_10 */
- { pinmux(17), 2, 6 }, /* LCD_D_11 */
- { pinmux(17), 2, 5 }, /* LCD_D_12 */
- { pinmux(17), 2, 4 }, /* LCD_D_13 */
- { pinmux(17), 2, 3 }, /* LCD_D_14 */
- { pinmux(17), 2, 2 }, /* LCD_D_15 */
- { pinmux(18), 2, 6 }, /* LCD_PCLK */
- { pinmux(19), 2, 0 }, /* LCD_HSYNC */
- { pinmux(19), 2, 1 }, /* LCD_VSYNC */
- { pinmux(19), 2, 6 }, /* DA850_NLCD_AC_ENB_CS */
-};
-
-const struct pinmux_config halten_pin[] = {
- { pinmux(3), 4, 2 } /* GPIO8[6] HALTEN */
-};
-
-static const struct pinmux_resource pinmuxes[] = {
-#ifdef CONFIG_SPI_FLASH
- PINMUX_ITEM(spi1_pins),
-#endif
- PINMUX_ITEM(uart_pins),
- PINMUX_ITEM(i2c_pins),
-#ifdef CONFIG_NAND_DAVINCI
- PINMUX_ITEM(nand_pins),
-#endif
-#ifdef CONFIG_VIDEO
- PINMUX_ITEM(lcd_pins),
-#endif
-};
-
-static const struct lpsc_resource lpsc[] = {
- { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
- { DAVINCI_LPSC_SPI1 }, /* Serial Flash */
- { DAVINCI_LPSC_EMAC }, /* image download */
- { DAVINCI_LPSC_UART0 }, /* console */
- { DAVINCI_LPSC_GPIO },
- { DAVINCI_LPSC_LCDC }, /* LCD */
-};
-
-int board_early_init_f(void)
-{
- /* PinMux for GPIO */
- if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0)
- return 1;
-
- /* Set DISP_ON high to enable LCD output*/
- gpio_direction_output(97, 1);
-
- /* Set the RESETOUTn low */
- gpio_direction_output(111, 0);
-
- /* Set U0_SW0 low for UART0 as console*/
- gpio_direction_output(106, 0);
-
- /* Set U0_SW1 low for UART0 as console*/
- gpio_direction_output(108, 0);
-
- /* Set LCD_B_PWR low to power down LCD Backlight*/
- gpio_direction_output(102, 0);
-
- irq_init();
-
- /*
- * NAND CS setup - cycle counts based on da850evm NAND timings in the
- * Linux kernel @ 25MHz EMIFA
- */
-#ifdef CONFIG_NAND_DAVINCI
- writel((DAVINCI_ABCR_WSETUP(0) |
- DAVINCI_ABCR_WSTROBE(1) |
- DAVINCI_ABCR_WHOLD(0) |
- DAVINCI_ABCR_RSETUP(0) |
- DAVINCI_ABCR_RSTROBE(1) |
- DAVINCI_ABCR_RHOLD(0) |
- DAVINCI_ABCR_TA(0) |
- DAVINCI_ABCR_ASIZE_8BIT),
- &davinci_emif_regs->ab1cr); /* CS2 */
-#endif
-
- /*
- * Power on required peripherals
- * ARM does not have access by default to PSC0 and PSC1
- * assuming here that the DSP bootloader has set the IOPU
- * such that PSC access is available to ARM
- */
- if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
- return 1;
-
- /* setup the SUSPSRC for ARM to control emulation suspend */
- writel(readl(&davinci_syscfg_regs->suspsrc) &
- ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
- DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
- DAVINCI_SYSCFG_SUSPSRC_UART0),
- &davinci_syscfg_regs->suspsrc);
-
- /* configure pinmux settings */
- if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
- return 1;
-
-#ifdef CONFIG_DRIVER_TI_EMAC
- if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0)
- return 1;
-
- davinci_emac_mii_mode_sel(HAS_RMII);
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
- /* enable the console UART */
- writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
- DAVINCI_UART_PWREMU_MGMT_UTRST),
- &davinci_uart0_ctrl_regs->pwremu_mgmt);
-
- /*
- * Reconfigure the LCDC priority to the highest to ensure that
- * the throughput/latency requirements for the LCDC are met.
- */
- writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff,
- &davinci_syscfg_regs->mstpri[2]);
-
-
- return 0;
-}
-
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
- return 1;
-}
-
-int board_init(void)
-{
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_EA20;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- da8xx_video_init(&lcd_panel, &lcd_cfg, 16);
-
- return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-
-int board_late_init(void)
-{
- unsigned char buf[2];
- int ret;
-
- /* PinMux for HALTEN */
- if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0)
- return 1;
-
- /* Set HALTEN to high */
- gpio_direction_output(134, 1);
-
- /* Set fixed contrast settings for LCD via I2C potentiometer */
- buf[0] = 0x00;
- buf[1] = 0xd7;
- ret = i2c_write(0x2e, 6, 1, buf, 2);
- if (ret)
- puts("\nContrast Settings FAILED\n");
-
- /* Set LCD_B_PWR high to power up LCD Backlight*/
- gpio_set_value(102, 1);
- return 0;
-}
-#endif /* CONFIG_BOARD_LATE_INIT */
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
- if (!davinci_emac_initialize()) {
- printf("Error: Ethernet init failed!\n");
- return -1;
- }
-
- /*
- * This board has a RMII PHY. However, the MDC line on the SOM
- * must not be disabled (there is no MII PHY on the
- * baseboard) via the GPIO2[6], because this pin
- * disables at the same time the SPI flash.
- */
-
- return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
+++ /dev/null
-if TARGET_MCX
-
-config SYS_BOARD
- default "mcx"
-
-config SYS_VENDOR
- default "htkw"
-
-config SYS_CONFIG_NAME
- default "mcx"
-
-endif
+++ /dev/null
-MCX BOARD
-M: Anatolij Gustschin <agust@denx.de>
-S: Maintained
-F: board/htkw/mcx/
-F: include/configs/mcx.h
-F: configs/mcx_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
-#
-# Based on ti/evm/Makefile
-
-obj-y := mcx.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * Based on ti/evm/evm.c
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/omap_gpio.h>
-#include <asm/arch/dss.h>
-#include <asm/arch/clock.h>
-#include <errno.h>
-#include <i2c.h>
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-#include "mcx.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define HOT_WATER_BUTTON 42
-#define LCD_OUTPUT 55
-
-/* Address of the framebuffer in RAM. */
-#define FB_START_ADDRESS 0x88000000
-
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- gpio_direction_output(LCD_OUTPUT, 0);
-
- return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
- if (gpio_request(HOT_WATER_BUTTON, "hot-water-button") < 0) {
- puts("Failed to get hot-water-button pin\n");
- return -ENODEV;
- }
- gpio_direction_input(HOT_WATER_BUTTON);
-
- /*
- * if hot-water-button is pressed
- * change bootcmd
- */
- if (gpio_get_value(HOT_WATER_BUTTON))
- return 0;
-
- env_set("bootcmd", "run swupdate");
-
- return 0;
-}
-#endif
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_MCX();
-}
-
-#if defined(CONFIG_MMC_OMAP_HS)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-
-static struct panel_config lcd_cfg = {
- .timing_h = PANEL_TIMING_H(40, 40, 48),
- .timing_v = PANEL_TIMING_V(29, 13, 3),
- .pol_freq = 0x00003000, /* Pol Freq */
- .divisor = 0x0001000E,
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = 0,
- .lcd_size = PANEL_LCD_SIZE(800, 480),
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
-};
-
-int board_video_init(void)
-{
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- void *fb;
-
- fb = (void *)FB_START_ADDRESS;
-
- lcd_cfg.frame_buffer = fb;
-
- setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
- setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
-
- omap3_dss_panel_config(&lcd_cfg);
- omap3_dss_enable();
-
- return 0;
-}
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * Based on ti/evm/evm.h
- */
-
-#ifndef _AM3517EVM_H_
-#define _AM3517EVM_H_
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "HTKW mcx Board",
- "NAND",
-};
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_MCX() \
- /* SDRC */\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_CKE0), (M0)) \
- MUX_VAL(CP(SDRC_CKE1), (M0)) \
- MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
- /*sdrc_strben_dly0*/\
- MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
- /*sdrc_strben_dly1*/\
- /* GPMC */\
- MUX_VAL(CP(GPMC_A1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A2), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A3), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A4), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A6), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \
- /* GPIO_43 LCD buffer enable */ \
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS2), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M4))\
- MUX_VAL(CP(GPMC_NCS5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M4)) \
- /* GPIO_57 TS_PenIRQn */\
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M4)) \
- /* GPIO_58 ETHERNET RESET */\
- MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | DIS | M4)) \
- /* GPIO_61 SD-CARD CD */ \
- MUX_VAL(CP(GPMC_NWP), (IDIS | PTU | EN | M4)) \
- /* GPIO_62 Nand write protect, keep enabled */ \
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4))\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4))\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \
- /* GPIO_65 SD-CARD WP */\
- /* DSS */\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
- /* CAMERA */\
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CAM_XCLKA), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CAM_FLD), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D1), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D2), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D3), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D4), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D5), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D6), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D7), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D8), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D9), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D10), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_D11), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_XCLKB), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CAM_STROBE), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) \
- /* MMC */\
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(MMC2_CMD), (IDIS | PTD | DIS | M4)) \
- /* GPIO_131 LCD Enable */ \
- MUX_VAL(CP(MMC2_DAT0), (IDIS | PTD | DIS | M4)) \
- /* GPIO_132 USB host Enable */\
- MUX_VAL(CP(MMC2_DAT1), (IDIS | PTD | DIS | M4)) \
- /* GPIO_133 HDMI PD */\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4))\
- /* McBSP */\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTU | EN | M4))\
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP2_DX), (IEN | PTU | EN | M4))\
- \
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4))\
- \
- MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) \
- /* GPIO_152 USB phy2 reset */\
- MUX_VAL(CP(MCBSP4_DR), (IEN | PTU | EN | M4)) \
- /* GPIO_153 */\
- MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) \
- /* GPIO_154 USB phy1 reset */\
- MUX_VAL(CP(MCBSP4_FSX), (IEN | PTU | EN | M4)) \
- /* GPIO_155 TS_BUSY */\
- /* UART */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
- /* I2C */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) \
- /* GPIO_170 Touchscreen ISR */\
- /* McSPI */\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) \
- /* HSUSB2_dat7 */\
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) \
- /* HSUSB2_dat4 */\
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) \
- /* HSUSB2_dat5 */\
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) \
- /* HSUSB2_dat6 */\
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) \
- /* HSUSB2_dat3 */\
- /* CCDC */\
- MUX_VAL(CP(CCDC_PCLK), (IEN | PTD | EN | M4)) \
- /* CCDC_FIELD: gpio_95, uP-TXD4 */ \
- MUX_VAL(CP(CCDC_FIELD), (IDIS | PTD | DIS | M2)) \
- /* CCDC_HD: gpio_96, uP-RTS4# */ \
- MUX_VAL(CP(CCDC_HD), (IDIS | PTD | DIS | M2)) \
- /* CCDC_VD: gpio_97, uP-CTS4# */ \
- MUX_VAL(CP(CCDC_VD), (IEN | PTD | EN | M2)) \
- /* CCDC_WEN: gpio_98, uP-RXD4 */ \
- MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M2)) \
- MUX_VAL(CP(CCDC_WEN), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | EN | M4)) \
- /* RMII */\
- MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
- MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
- MUX_VAL(CP(RMII_RXD0), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
- MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
- /* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M0)) \
- /* HSUSB */\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
- /* HDQ */\
- MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) \
- /* Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4))\
- MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4))\
- MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | DIS | M4)) \
- \
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4))\
- MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4))\
- /* JTAG */\
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(JTAG_TCK), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(JTAG_TMS), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(JTAG_TDI), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(JTAG_EMU0), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(JTAG_EMU1), (IEN | PTU | EN | M4))\
- /* ETK (ES2 onwards) */\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_stp */ \
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_clk */\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \
- /* Die to Die */\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
-
-#endif
+++ /dev/null
-if TARGET_CALIMAIN
-
-config SYS_BOARD
- default "calimain"
-
-config SYS_VENDOR
- default "omicron"
-
-config SYS_CONFIG_NAME
- default "calimain"
-
-endif
+++ /dev/null
-CALIMAIN BOARD
-M: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
-M: Christoph Rüdisser <christoph.ruedisser@omicronenergy.com>
-S: Maintained
-F: board/omicron/calimain/
-F: include/configs/calimain.h
-F: configs/calimain_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-
-obj-y := calimain.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 OMICRON electronics GmbH
- *
- * Based on da850evm.c. Original Copyrights follow:
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <netdev.h>
-#include <watchdog.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/timer_defs.h>
-#include "../../../drivers/gpio/da8xx_gpio.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CALIMAIN_HWVERSION_MASK 0x7f000000
-#define CALIMAIN_HWVERSION_SHIFT 24
-
-/* Hardware version pinmux settings */
-const struct pinmux_config hwversion_pins[] = {
- { pinmux(16), 8, 2 }, /* GP7[15] */
- { pinmux(16), 8, 3 }, /* GP7[14] */
- { pinmux(16), 8, 4 }, /* GP7[13] */
- { pinmux(16), 8, 5 }, /* GP7[12] */
- { pinmux(16), 8, 6 }, /* GP7[11] */
- { pinmux(16), 8, 7 }, /* GP7[10] */
- { pinmux(17), 8, 0 }, /* GP7[9] */
- { pinmux(17), 8, 1 } /* GP7[8] */
-};
-
-const struct pinmux_resource pinmuxes[] = {
- PINMUX_ITEM(uart2_pins_txrx),
- PINMUX_ITEM(emac_pins_mii),
- PINMUX_ITEM(emac_pins_mdio),
- PINMUX_ITEM(emifa_pins_nor),
- PINMUX_ITEM(emifa_pins_cs2),
- PINMUX_ITEM(emifa_pins_cs3),
-};
-
-const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
-
-const struct lpsc_resource lpsc[] = {
- { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
- { DAVINCI_LPSC_EMAC }, /* image download */
- { DAVINCI_LPSC_UART2 }, /* console */
- { DAVINCI_LPSC_GPIO },
-};
-
-const int lpsc_size = ARRAY_SIZE(lpsc);
-
-/* read board revision from GPIO7[8..14] */
-u32 get_board_rev(void)
-{
- lpsc_on(DAVINCI_LPSC_GPIO);
- if (davinci_configure_pin_mux(hwversion_pins,
- ARRAY_SIZE(hwversion_pins)) != 0)
- return 0xffffffff;
-
- return (davinci_gpio_bank67->in_data & CALIMAIN_HWVERSION_MASK)
- >> CALIMAIN_HWVERSION_SHIFT;
-}
-
-/*
- * determine the oscillator frequency depending on the board revision
- *
- * rev 0x00 ... 25 MHz oscillator
- * rev 0x01 ... 24 MHz oscillator
- */
-int calimain_get_osc_freq(void)
-{
- u32 rev;
- int freq;
-
- rev = get_board_rev();
- switch (rev) {
- case 0x00:
- freq = 25000000;
- break;
- default:
- freq = 24000000;
- break;
- }
- return freq;
-}
-
-int board_init(void)
-{
- int val;
-
- irq_init();
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-#ifdef CONFIG_DRIVER_TI_EMAC
- /* select emac MII mode */
- val = readl(&davinci_syscfg_regs->cfgchip3);
- val &= ~(1 << 8);
- writel(val, &davinci_syscfg_regs->cfgchip3);
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-#ifdef CONFIG_HW_WATCHDOG
- davinci_hw_watchdog_enable();
-#endif
-
- printf("Input clock frequency: %d Hz\n", calimain_get_osc_freq());
- printf("Board revision: %d\n", get_board_rev());
-
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
- if (!davinci_emac_initialize()) {
- printf("Error: Ethernet init failed!\n");
- return -1;
- }
-
- return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-#ifdef CONFIG_HW_WATCHDOG
-void hw_watchdog_reset(void)
-{
- davinci_hw_watchdog_reset();
-}
-#endif
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := draak.o
+ifdef CONFIG_SPL_BUILD
+obj-y := ../rcar-common/gen3-spl.o
+else
+obj-y := draak.o ../rcar-common/common.o
+endif
return 0;
}
-int dram_init(void)
-{
- if (fdtdec_setup_mem_size_base() != 0)
- return -EINVAL;
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- fdtdec_setup_memory_banksize();
-
- return 0;
-}
-
#define RST_BASE 0xE6160000
#define RST_CA57RESCNT (RST_BASE + 0x40)
#define RST_CA53RESCNT (RST_BASE + 0x44)
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := eagle.o
+ifdef CONFIG_SPL_BUILD
+obj-y := ../rcar-common/gen3-spl.o
+else
+obj-y := eagle.o ../rcar-common/common.o
+endif
return 0;
}
-int dram_init(void)
-{
- if (fdtdec_setup_mem_size_base() != 0)
- return -EINVAL;
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- fdtdec_setup_memory_banksize();
-
- return 0;
-}
-
#define RST_BASE 0xE6160000
#define RST_CA57RESCNT (RST_BASE + 0x40)
#define RST_CA53RESCNT (RST_BASE + 0x44)
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := ebisu.o
+ifdef CONFIG_SPL_BUILD
+obj-y := ../rcar-common/gen3-spl.o
+else
+obj-y := ebisu.o ../rcar-common/common.o
+endif
return 0;
}
-/*
- * If the firmware passed a device tree use it for U-Boot DRAM setup.
- */
-extern u64 rcar_atf_boot_args[];
-
-int dram_init(void)
-{
- const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
- const void *blob;
-
- /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
- if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
- blob = atf_fdt_blob;
- else
- blob = gd->fdt_blob;
-
- return fdtdec_setup_mem_size_base_fdt(blob);
-}
-
-int dram_init_banksize(void)
-{
- const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
- const void *blob;
-
- /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
- if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
- blob = atf_fdt_blob;
- else
- blob = gd->fdt_blob;
-
- fdtdec_setup_memory_banksize_fdt(blob);
-
- return 0;
-}
-
#define RST_BASE 0xE6160000
#define RST_CA57RESCNT (RST_BASE + 0x40)
#define RST_CA53RESCNT (RST_BASE + 0x44)
#include <common.h>
#include <asm/arch/rmobile.h>
+
+#ifdef CONFIG_RCAR_GEN3
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* If the firmware passed a device tree use it for U-Boot DRAM setup. */
+extern u64 rcar_atf_boot_args[];
+
+int dram_init(void)
+{
+ const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
+ const void *blob;
+
+ /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
+ if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
+ blob = atf_fdt_blob;
+ else
+ blob = gd->fdt_blob;
+
+ return fdtdec_setup_mem_size_base_fdt(blob);
+}
+
+int dram_init_banksize(void)
+{
+ const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
+ const void *blob;
+
+ /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
+ if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
+ blob = atf_fdt_blob;
+ else
+ blob = gd->fdt_blob;
+
+ fdtdec_setup_memory_banksize_fdt(blob);
+
+ return 0;
+}
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R-Car Gen3 recovery SPL
+ *
+ * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <spl.h>
+
+#define RCAR_CNTC_BASE 0xE6080000
+#define CNTCR_EN BIT(0)
+
+void board_init_f(ulong dummy)
+{
+ writel(CNTCR_EN, RCAR_CNTC_BASE);
+ timer_init();
+}
+
+void spl_board_init(void)
+{
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_UART;
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ debug("image entry point: 0x%lx\n", spl_image->entry_point);
+ if (spl_image->os == IH_OS_ARM_TRUSTED_FIRMWARE) {
+ typedef void (*image_entry_arg_t)(int, int, int, int)
+ __attribute__ ((noreturn));
+ image_entry_arg_t image_entry =
+ (image_entry_arg_t)(uintptr_t) spl_image->entry_point;
+ image_entry(IH_MAGIC, CONFIG_SPL_TEXT_BASE, 0, 0);
+ } else {
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t)spl_image->entry_point;
+ image_entry();
+ }
+}
+
+void s_init(void)
+{
+}
+
+void reset_cpu(ulong addr)
+{
+}
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := salvator-x.o
+ifdef CONFIG_SPL_BUILD
+obj-y := ../rcar-common/gen3-spl.o
+else
+obj-y := salvator-x.o ../rcar-common/common.o
+endif
return 0;
}
-/*
- * If the firmware passed a device tree use it for U-Boot DRAM setup.
- */
-extern u64 rcar_atf_boot_args[];
-
-int dram_init(void)
-{
- const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
- const void *blob;
-
- /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
- if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
- blob = atf_fdt_blob;
- else
- blob = gd->fdt_blob;
-
- return fdtdec_setup_mem_size_base_fdt(blob);
-}
-
-int dram_init_banksize(void)
-{
- const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
- const void *blob;
-
- /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
- if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
- blob = atf_fdt_blob;
- else
- blob = gd->fdt_blob;
-
- fdtdec_setup_memory_banksize_fdt(blob);
-
- return 0;
-}
-
#define RST_BASE 0xE6160000
#define RST_CA57RESCNT (RST_BASE + 0x40)
#define RST_CA53RESCNT (RST_BASE + 0x44)
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := ulcb.o cpld.o
+ifdef CONFIG_SPL_BUILD
+obj-y := ../rcar-common/gen3-spl.o
+else
+obj-y := ulcb.o cpld.o ../rcar-common/common.o
+endif
return 0;
}
-/*
- * If the firmware passed a device tree use it for U-Boot DRAM setup.
- */
-extern u64 rcar_atf_boot_args[];
-
-int dram_init(void)
-{
- const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
- const void *blob;
-
- /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
- if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
- blob = atf_fdt_blob;
- else
- blob = gd->fdt_blob;
-
- return fdtdec_setup_mem_size_base_fdt(blob);
-}
-
-int dram_init_banksize(void)
-{
- const void *atf_fdt_blob = (const void *)(rcar_atf_boot_args[1]);
- const void *blob;
-
- /* Check if ATF passed us DTB. If not, fall back to builtin DTB. */
- if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
- blob = atf_fdt_blob;
- else
- blob = gd->fdt_blob;
-
- fdtdec_setup_memory_banksize_fdt(blob);
-
- return 0;
-}
-
#ifdef CONFIG_MULTI_DTB_FIT
int board_fit_config_name_match(const char *name)
{
#endif
#ifdef CONFIG_PMIC_STPMIC1
-int board_ddr_power_init(void)
+int board_ddr_power_init(enum ddr_type ddr_type)
{
struct udevice *dev;
+ bool buck3_at_1800000v = false;
int ret;
ret = uclass_get_device_by_driver(UCLASS_PMIC,
/* No PMIC on board */
return 0;
- /* VTT = Set LDO3 to sync mode */
- ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
- if (ret < 0)
- return ret;
-
- ret &= ~STPMIC1_LDO3_MODE;
- ret &= ~STPMIC1_LDO12356_VOUT_MASK;
- ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
-
- ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
- ret);
- if (ret < 0)
- return ret;
-
- /* VDD_DDR = Set BUCK2 to 1.35V */
- ret = pmic_clrsetbits(dev,
- STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
- STPMIC1_BUCK_VOUT_MASK,
- STPMIC1_BUCK2_1350000V);
- if (ret < 0)
- return ret;
-
- /* Enable VDD_DDR = BUCK2 */
- ret = pmic_clrsetbits(dev,
- STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
- STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
- if (ret < 0)
- return ret;
-
- mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
- /* Enable VREF */
- ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
- STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
- if (ret < 0)
- return ret;
-
- mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
-
- /* Enable LDO3 */
- ret = pmic_clrsetbits(dev,
- STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
- STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
- if (ret < 0)
- return ret;
-
- mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+ switch (ddr_type) {
+ case STM32MP_DDR3:
+ /* VTT = Set LDO3 to sync mode */
+ ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+ if (ret < 0)
+ return ret;
+
+ ret &= ~STPMIC1_LDO3_MODE;
+ ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+ ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
+
+ ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+ ret);
+ if (ret < 0)
+ return ret;
+
+ /* VDD_DDR = Set BUCK2 to 1.35V */
+ ret = pmic_clrsetbits(dev,
+ STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+ STPMIC1_BUCK_VOUT_MASK,
+ STPMIC1_BUCK2_1350000V);
+ if (ret < 0)
+ return ret;
+
+ /* Enable VDD_DDR = BUCK2 */
+ ret = pmic_clrsetbits(dev,
+ STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+ STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
+ if (ret < 0)
+ return ret;
+
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+ /* Enable VREF */
+ ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
+ STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
+ if (ret < 0)
+ return ret;
+
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+ /* Enable VTT = LDO3 */
+ ret = pmic_clrsetbits(dev,
+ STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+ STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+ if (ret < 0)
+ return ret;
+
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+ break;
+
+ case STM32MP_LPDDR2:
+ case STM32MP_LPDDR3:
+ /*
+ * configure VDD_DDR1 = LDO3
+ * Set LDO3 to 1.8V
+ * + bypass mode if BUCK3 = 1.8V
+ * + normal mode if BUCK3 != 1.8V
+ */
+ ret = pmic_reg_read(dev,
+ STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3));
+ if (ret < 0)
+ return ret;
+
+ if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V)
+ buck3_at_1800000v = true;
+
+ ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+ if (ret < 0)
+ return ret;
+
+ ret &= ~STPMIC1_LDO3_MODE;
+ ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+ ret |= STPMIC1_LDO3_1800000;
+ if (buck3_at_1800000v)
+ ret |= STPMIC1_LDO3_MODE;
+
+ ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+ ret);
+ if (ret < 0)
+ return ret;
+
+ /* VDD_DDR2 : Set BUCK2 to 1.2V */
+ ret = pmic_clrsetbits(dev,
+ STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+ STPMIC1_BUCK_VOUT_MASK,
+ STPMIC1_BUCK2_1200000V);
+ if (ret < 0)
+ return ret;
+
+ /* Enable VDD_DDR1 = LDO3 */
+ ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+ STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+ if (ret < 0)
+ return ret;
+
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+ /* Enable VDD_DDR2 =BUCK2 */
+ ret = pmic_clrsetbits(dev,
+ STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+ STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
+ if (ret < 0)
+ return ret;
+
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+ /* Enable VREF */
+ ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
+ STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
+ if (ret < 0)
+ return ret;
+
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+ break;
+
+ default:
+ break;
+ };
return 0;
}
+++ /dev/null
-if TARGET_TWISTER
-
-config SYS_BOARD
- default "twister"
-
-config SYS_VENDOR
- default "technexion"
-
-config SYS_CONFIG_NAME
- default "twister"
-
-endif
+++ /dev/null
-TWISTER BOARD
-M: Stefano Babic <sbabic@denx.de>
-S: Maintained
-F: board/technexion/twister/
-F: include/configs/twister.h
-F: configs/twister_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
-#
-# Based on ti/evm/Makefile
-
-obj-y := twister.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/omap_gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <i2c.h>
-#include <spl.h>
-#include <mmc.h>
-#include <asm/gpio.h>
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#include "twister.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Timing definitions for Ethernet Controller */
-static const u32 gpmc_smc911[] = {
- NET_GPMC_CONFIG1,
- NET_GPMC_CONFIG2,
- NET_GPMC_CONFIG3,
- NET_GPMC_CONFIG4,
- NET_GPMC_CONFIG5,
- NET_GPMC_CONFIG6,
-};
-
-static const u32 gpmc_XR16L2751[] = {
- XR16L2751_GPMC_CONFIG1,
- XR16L2751_GPMC_CONFIG2,
- XR16L2751_GPMC_CONFIG3,
- XR16L2751_GPMC_CONFIG4,
- XR16L2751_GPMC_CONFIG5,
- XR16L2751_GPMC_CONFIG6,
-};
-
-#ifdef CONFIG_USB_EHCI_OMAP
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- /* Chip select 1 and 3 are used for XR16L2751 UART controller */
- enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[1],
- XR16L2751_UART1_BASE, GPMC_SIZE_16M);
-
- enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[3],
- XR16L2751_UART2_BASE, GPMC_SIZE_16M);
-
- gpio_request(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, "USB_PHY1_RESET");
- gpio_direction_output(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, 1);
-
- return 0;
-}
-
-#ifndef CONFIG_SPL_BUILD
-int misc_init_r(void)
-{
- char *eth_addr;
- struct tam3517_module_info info;
- int ret;
-
- omap_die_id_display();
-
- eth_addr = env_get("ethaddr");
- if (eth_addr)
- return 0;
-
- TAM3517_READ_EEPROM(&info, ret);
- if (!ret)
- TAM3517_READ_MAC_FROM_EEPROM(&info);
-
- return 0;
-}
-#endif
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_TWISTER();
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_DRIVER_TI_EMAC
- davinci_emac_initialize();
-#endif
- /* init cs for extern lan */
- enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
- CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-#ifdef CONFIG_SMC911X
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#else
- return 0;
-#endif
-}
-
-#if defined(CONFIG_MMC_OMAP_HS)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#ifdef CONFIG_SPL_OS_BOOT
-/*
- * Do board specific preparation before SPL
- * Linux boot
- */
-void spl_board_prepare_for_linux(void)
-{
- /* init cs for extern lan */
- enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
- CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-}
-int spl_start_uboot(void)
-{
- int val = 0;
- if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
- gpio_direction_input(SPL_OS_BOOT_KEY);
- val = gpio_get_value(SPL_OS_BOOT_KEY);
- gpio_free(SPL_OS_BOOT_KEY);
- }
- return val;
-}
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright (C) 2010 TechNexion Ltd.
- */
-
-#ifndef _TAM3517_H_
-#define _TAM3517_H_
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "TAM3517 TWISTER Board",
- "NAND",
-};
-
-#define XR16L2751_GPMC_CONFIG1 0x00000000
-#define XR16L2751_GPMC_CONFIG2 0x001e1e01
-#define XR16L2751_GPMC_CONFIG3 0x00080300
-#define XR16L2751_GPMC_CONFIG4 0x1c091c09
-#define XR16L2751_GPMC_CONFIG5 0x04181f1f
-#define XR16L2751_GPMC_CONFIG6 0x00000FCF
-
-#define XR16L2751_UART1_BASE 0x21000000
-#define XR16L2751_UART2_BASE 0x23000000
-
-/* GPIO used to select between U-Boot and kernel */
-#define SPL_OS_BOOT_KEY 55
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_TWISTER() \
- /* SDRC */\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_CKE0), (M0)) \
- MUX_VAL(CP(SDRC_CKE1), (M0)) \
- MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
- /*sdrc_strben_dly0*/\
- MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
- /*sdrc_strben_dly1*/\
- /* GPMC */\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTD | EN | M2)) /*PWM9*/\
- MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS6), (IDIS | PTD | EN | M3)) /*PWM11*/ \
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | EN | M4)) /*GPIO_58*/ \
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \
- /* DSS */\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
- /* CAMERA */\
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
- /* MMC */\
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
- /* CardDetect */\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) \
- /* McBSP */\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | EN | M4)) /*GPIO_116*/ \
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \
- \
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_152*/\
- MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\
- MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\
- MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M4)) /*GPIO_155*/\
- /* UART */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_RTS), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) /*GPIO_163*/ \
- MUX_VAL(CP(UART3_RTS_SD), (IEN | PTD | DIS | M4)) /*GPIO_164*/\
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
- /* I2C */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
- /* McSPI */\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M4)) /*GPIO_176*/\
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M4)) \
- \
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M4)) \
- /* CCDC */\
- MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \
- MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \
- MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
- /* RMII */\
- MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
- MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
- MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
- MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
- /* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
- /* HSUSB */\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
- /* HDQ */\
- MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) \
- /* Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
- /* - GPIO30 */\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
- /* - VIO_1V8*/\
- MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
- \
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
- /* JTAG */\
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_EMU0), (IDIS | PTD | EN | M4)) /*GPIO_11*/ \
- MUX_VAL(CP(JTAG_EMU1), (IDIS | PTD | EN | M4)) /*GPIO_31*/ \
- /* ETK (ES2 onwards) */\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_stp */ \
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_clk */\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \
- /* hsusb1_dir */\
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \
- /* hsusb1_nxt */\
- MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \
- /* Die to Die */\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
-
-#endif
+++ /dev/null
-if TARGET_MT_VENTOUX
-
-config SYS_BOARD
- default "mt_ventoux"
-
-config SYS_VENDOR
- default "teejet"
-
-config SYS_CONFIG_NAME
- default "mt_ventoux"
-
-endif
+++ /dev/null
-MT_VENTOUX BOARD
-M: Stefano Babic <sbabic@denx.de>
-S: Maintained
-F: board/teejet/mt_ventoux/
-F: include/configs/mt_ventoux.h
-F: configs/mt_ventoux_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
-#
-# Based on ti/evm/Makefile
-
-obj-y := mt_ventoux.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <fpga.h>
-#include <video_fb.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/omap_gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/dss.h>
-#include <asm/arch/clock.h>
-#include <i2c.h>
-#include <spartan3.h>
-#include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-#include "mt_ventoux.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BUZZER 140
-#define SPEAKER 141
-#define USB1_PWR 127
-#define USB2_PWR 149
-
-#ifndef CONFIG_FPGA
-#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
-#endif
-
-#define FPGA_RESET 62
-#define FPGA_PROG 116
-#define FPGA_CCLK 117
-#define FPGA_DIN 118
-#define FPGA_INIT 119
-#define FPGA_DONE 154
-
-#define LCD_PWR 138
-#define LCD_PON_PIN 139
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-static struct {
- u32 xres;
- u32 yres;
-} panel_resolution[] = {
- { 480, 272 },
- { 800, 480 }
-};
-
-static struct panel_config lcd_cfg[] = {
- {
- .timing_h = PANEL_TIMING_H(40, 5, 2),
- .timing_v = PANEL_TIMING_V(8, 8, 2),
- .pol_freq = 0x00003000, /* Pol Freq */
- .divisor = 0x00010033, /* 9 Mhz Pixel Clock */
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = 0,
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
- },
- {
- .timing_h = PANEL_TIMING_H(20, 192, 4),
- .timing_v = PANEL_TIMING_V(2, 20, 10),
- .pol_freq = 0x00004000, /* Pol Freq */
- .divisor = 0x0001000E, /* 36Mhz Pixel Clock */
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = 0,
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
- }
-};
-#endif
-
-/* Timing definitions for FPGA */
-static const u32 gpmc_fpga[] = {
- FPGA_GPMC_CONFIG1,
- FPGA_GPMC_CONFIG2,
- FPGA_GPMC_CONFIG3,
- FPGA_GPMC_CONFIG4,
- FPGA_GPMC_CONFIG5,
- FPGA_GPMC_CONFIG6,
-};
-
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
-
-static inline void fpga_reset(int nassert)
-{
- gpio_set_value(FPGA_RESET, !nassert);
-}
-
-int fpga_pgm_fn(int nassert, int nflush, int cookie)
-{
- debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
-
- gpio_set_value(FPGA_PROG, !nassert);
-
- return nassert;
-}
-
-int fpga_init_fn(int cookie)
-{
- return !gpio_get_value(FPGA_INIT);
-}
-
-int fpga_done_fn(int cookie)
-{
- return gpio_get_value(FPGA_DONE);
-}
-
-int fpga_pre_config_fn(int cookie)
-{
- debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
-
- /* Setting GPIOs for programming Mode */
- gpio_request(FPGA_RESET, "FPGA_RESET");
- gpio_direction_output(FPGA_RESET, 1);
- gpio_request(FPGA_PROG, "FPGA_PROG");
- gpio_direction_output(FPGA_PROG, 1);
- gpio_request(FPGA_CCLK, "FPGA_CCLK");
- gpio_direction_output(FPGA_CCLK, 1);
- gpio_request(FPGA_DIN, "FPGA_DIN");
- gpio_direction_output(FPGA_DIN, 0);
- gpio_request(FPGA_INIT, "FPGA_INIT");
- gpio_direction_input(FPGA_INIT);
- gpio_request(FPGA_DONE, "FPGA_DONE");
- gpio_direction_input(FPGA_DONE);
-
- /* Be sure that signal are deasserted */
- gpio_set_value(FPGA_RESET, 1);
- gpio_set_value(FPGA_PROG, 1);
-
- return 0;
-}
-
-int fpga_post_config_fn(int cookie)
-{
- debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
-
- fpga_reset(true);
- udelay(100);
- fpga_reset(false);
-
- return 0;
-}
-
-/* Write program to the FPGA */
-int fpga_wr_fn(int nassert_write, int flush, int cookie)
-{
- gpio_set_value(FPGA_DIN, nassert_write);
-
- return nassert_write;
-}
-
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
- gpio_set_value(FPGA_CCLK, assert_clk);
-
- return assert_clk;
-}
-
-xilinx_spartan3_slave_serial_fns mt_ventoux_fpga_fns = {
- fpga_pre_config_fn,
- fpga_pgm_fn,
- fpga_clk_fn,
- fpga_init_fn,
- fpga_done_fn,
- fpga_wr_fn,
- fpga_post_config_fn,
-};
-
-xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
- (void *)&mt_ventoux_fpga_fns, 0);
-
-/* Initialize the FPGA */
-static void mt_ventoux_init_fpga(void)
-{
- fpga_pre_config_fn(0);
-
- /* Setting CS1 for FPGA access */
- enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
- FPGA_BASE_ADDR, GPMC_SIZE_128M);
-
- fpga_init();
- fpga_add(fpga_xilinx, &fpga);
-}
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- mt_ventoux_init_fpga();
-
- /* GPIO_140: speaker #mute */
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4))
- /* GPIO_141: Buzz Hi */
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4))
-
- /* Turning off the buzzer */
- gpio_request(BUZZER, "BUZZER_MUTE");
- gpio_request(SPEAKER, "SPEAKER");
- gpio_direction_output(BUZZER, 0);
- gpio_direction_output(SPEAKER, 0);
-
- /* Activate USB power */
- gpio_request(USB1_PWR, "USB1_PWR");
- gpio_request(USB2_PWR, "USB2_PWR");
- gpio_direction_output(USB1_PWR, 1);
- gpio_direction_output(USB2_PWR, 1);
-
- return 0;
-}
-
-#ifndef CONFIG_SPL_BUILD
-int misc_init_r(void)
-{
- char *eth_addr;
- struct tam3517_module_info info;
- int ret;
-
- TAM3517_READ_EEPROM(&info, ret);
- omap_die_id_display();
-
- if (ret)
- return 0;
- eth_addr = env_get("ethaddr");
- if (!eth_addr)
- TAM3517_READ_MAC_FROM_EEPROM(&info);
-
- TAM3517_PRINT_SOM_INFO(&info);
- return 0;
-}
-#endif
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_MT_VENTOUX();
-}
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int board_eth_init(bd_t *bis)
-{
- davinci_emac_initialize();
- return 0;
-}
-
-#if defined(CONFIG_MMC_OMAP_HS) && \
- !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-int board_video_init(void)
-{
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- struct panel_config *panel = &lcd_cfg[0];
- char *s;
- u32 index = 0;
-
- void *fb;
-
- fb = (void *)0x88000000;
-
- s = env_get("panel");
- if (s) {
- index = simple_strtoul(s, NULL, 10);
- if (index < ARRAY_SIZE(lcd_cfg))
- panel = &lcd_cfg[index];
- else
- return 0;
- }
-
- panel->frame_buffer = fb;
- printf("Panel: %dx%d\n", panel_resolution[index].xres,
- panel_resolution[index].yres);
- panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
- (panel_resolution[index].xres - 1);
-
- gpio_request(LCD_PWR, "LCD Power");
- gpio_request(LCD_PON_PIN, "LCD Pon");
- gpio_direction_output(LCD_PWR, 0);
- gpio_direction_output(LCD_PON_PIN, 1);
-
-
- setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
- setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
-
- omap3_dss_panel_config(panel);
- omap3_dss_enable();
-
- return 0;
-}
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
- *
- * Author: Hardy Weng <hardy.weng@technexion.com>
- *
- * Copyright (C) 2010 TechNexion Ltd.
- */
-
-#ifndef _MT_VENTOUX_H_
-#define _MT_VENTOUX_H_
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "Teejet MT_VENTOUX Board",
- "NAND",
-};
-
-/* FPGA CS1 configuration */
-#define FPGA_GPMC_CONFIG1 0x00001200
-#define FPGA_GPMC_CONFIG2 0x00161f00
-#define FPGA_GPMC_CONFIG3 0x00040400
-#define FPGA_GPMC_CONFIG4 0x120c1f08
-#define FPGA_GPMC_CONFIG5 0x001e161f
-#define FPGA_GPMC_CONFIG6 0x96080fcf
-
-#define FPGA_BASE_ADDR 0x20000000
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_MT_VENTOUX() \
- /* SDRC */\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_CKE0), (M0)) \
- MUX_VAL(CP(SDRC_CKE1), (M0)) \
- MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
- /* GPMC */\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTD | EN | M4))/* GPIO 53 */\
- MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /* GPIO 54 */\
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTD | EN | M4)) \
- /* GPIO 55 : NFS */\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS6), (IDIS | PTD | EN | M3)) /*PWM11*/ \
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | EN | M4)) /*GPIO_58*/ \
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M4)) \
- /*GPIO_62: FPGA_RESET */ \
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \
- /* GPIO_64*/ \
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \
- /* DSS */\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
- /* CAMERA */\
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
- /* MMC */\
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
- /* GPIO_126: CardDetect */\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
- /*GPIO_128 */ \
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \
- /* GPIO_138: LCD_ENVD */\
- MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | EN | M4)) \
- /* GPIO_139: LCD_PON */\
- /* McBSP */\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | EN | M4)) \
- /* GPIO_116: FPGA_PROG */ \
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | EN | M4)) \
- /* GPIO_117: FPGA_CCLK */ \
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | EN | M4)) \
- /* GPIO_118: FPGA_DIN */ \
- MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \
- /* GPIO_119: FPGA_INIT */ \
- \
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) \
- /*GPIO_152: Ignition Sense */ \
- MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M4)) \
- /*GPIO_153: Power Button Sense */ \
- MUX_VAL(CP(MCBSP4_DX), (IEN | PTU | DIS | M4)) \
- /* GPIO_154: FPGA_DONE */ \
- MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M4)) \
- /* GPIO_155: CA8_irq */ \
- /* UART */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_RTS), (IEN | PTU | EN | M4)) \
- /* GPIO_149: USB status 2 */\
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) \
- /* GPIO_150: USB status 1 */\
- \
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M2)) \
- /* gpt9_pwm */\
- MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M2)) \
- /* gpt10_pwm */\
- MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M2)) \
- /* gpt8_pwm */\
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M2)) \
- /* gpt11_pwm */\
- \
- MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) \
- /*GPIO_163 : TS_PENIRQ*/ \
- MUX_VAL(CP(UART3_RTS_SD), (IEN | PTD | DIS | M4)) \
- /*GPIO_164 : MMC */\
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
- /* I2C */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
- /* McSPI */\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M4)) /*GPIO_176*/\
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M4)) \
- \
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) \
- /* CCDC */\
- MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M4)) \
- /* GPIO94 */\
- MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M4)) \
- /* GPIO95: #Enable Output */\
- MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M4)) \
- /* GPIO 99: #SOM_PWR_OFF */\
- MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M4)) \
- /* GPIO_100: #power out */\
- MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M4)) \
- /* GPIO_102 */\
- MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M4)) \
- /* RMII */\
- MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
- MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
- MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
- MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
- /* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
- /* HSUSB */\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
- /* HDQ */\
- MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) \
- /* GPIO_170: auto update */\
- /* Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
- /* - GPIO30 */\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
- MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
- \
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) \
- /* gpio_10 */\
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
- /* JTAG */\
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_EMU0), (IDIS | PTD | EN | M4)) /*GPIO_11*/ \
- MUX_VAL(CP(JTAG_EMU1), (IDIS | PTD | EN | M4)) /*GPIO_31*/ \
- /* ETK (ES2 onwards) */\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_stp */ \
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_clk */\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) \
- /* gpio_24 */\
- MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \
- /* gpio_26 */\
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) \
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \
- /* gpio_29 */\
- /* Die to Die */\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
-
-#endif
Enable the 'cls' command which clears the screen contents
on video frame buffer.
-config CMD_DISPLAY
- bool "Enable the 'display' command, for character displays"
- help
- (this needs porting to driver model)
- This enables the 'display' command which allows a string to be
- displayed on a simple board-specific display. Implement
- display_putc() to use it.
-
config CMD_EFIDEBUG
bool "efidebug - display/configure UEFI environment"
depends on EFI_LOADER
ifdef CONFIG_POST
obj-$(CONFIG_CMD_DIAG) += diag.o
endif
-obj-$(CONFIG_CMD_DISPLAY) += display.o
obj-$(CONFIG_CMD_DTIMG) += dtimg.o
obj-$(CONFIG_CMD_ECHO) += echo.o
obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <command.h>
-#include <led-display.h>
-
-#undef DEBUG_DISP
-
-int do_display (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int i;
-
- /* Clear display */
- display_set(DISPLAY_CLEAR | DISPLAY_HOME);
-
- if (argc < 2)
- return (0);
-
- for (i = 1; i < argc; i++) {
- char *p = argv[i];
-
- if (i > 1) { /* Insert a space between strings */
- display_putc(' ');
- }
-
- while ((*p)) {
-#ifdef DEBUG_DISP
- putc(*p);
-#endif
- display_putc(*p++);
- }
- }
-
-#ifdef DEBUG_DISP
- putc('\n');
-#endif
-
- return (0);
-}
-
-/***************************************************/
-
-U_BOOT_CMD(
- display, CONFIG_SYS_MAXARGS, 1, do_display,
- "display string on dot matrix display",
- "[<string>]\n"
- " - with <string> argument: display <string> on dot matrix display\n"
- " - without arguments: clear dot matrix display"
-);
config PREBOOT
string "preboot default value"
depends on USE_PREBOOT
+ default ""
help
This is the default of "preboot" environment variable.
obj-y += cli.o
obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_simple.o cli_readline.o
+obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += cli_simple.o cli_readline.o
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
obj-y += command.o
obj-$(CONFIG_$(SPL_TPL_)LOG) += log.o
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5208EVBE"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_JFFS2=y
+CONFIG_DEFAULT_DEVICE_TREE="M52277EVB"
CONFIG_ENV_IS_IN_FLASH=y
# CONFIG_NET is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_JFFS2=y
+CONFIG_DEFAULT_DEVICE_TREE="M52277EVB_stmicro"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=2
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5235EVB_Flash32"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5235EVB"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_LOOPW=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
# CONFIG_NET is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MAC_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="M5253DEMO"
CONFIG_MTD_NOR_FLASH=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5272C3"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5275EVB"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5282EVB"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="M53017EVB"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5329AFEE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5329BFEE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5373EVB"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=1
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_mii"
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_rmii"
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_rmii_lowfreq"
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_serial_mii"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=1
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_serial_rmii"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=1
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54451EVB"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="M54451EVB_stmicro"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=1
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_ISO_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_a66"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_ISO_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_ISO_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_i66"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_ISO_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_intel"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_ISO_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_stm33"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=1
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475AFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475BFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475CFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475DFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475EFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475FFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475GFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485AFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485BFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485CFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485DFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485EFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485FFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485GFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485HFE"
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_MPC8xx=y
+CONFIG_SYS_IMMR=0xFF000000
CONFIG_TARGET_MCR3000=y
CONFIG_8xx_GCLK_FREQ=132000000
CONFIG_CMD_IMMAP=y
CONFIG_SYS_BR7_PRELIM_BOOL=y
CONFIG_SYS_BR7_PRELIM=0x1C000001
CONFIG_SYS_OR7_PRELIM=0xFFFF810A
-CONFIG_SYS_IMMR=0xFF000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTCOMMAND=y
CONFIG_LBLAW2_BASE=0xF0000000
CONFIG_LBLAW2_NAME="VSC7385"
CONFIG_LBLAW2_LENGTH_128_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_1=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385_BASE"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385_BASE"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
CONFIG_LBLAW3_BASE=0xFA000000
CONFIG_LBLAW3_NAME="BCSR"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_SCY_9=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_EHTR_1_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE2800000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_1=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="BCSR"
+CONFIG_BR3_OR3_BASE=0xFA000000
+CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_XACS_EXTENDED=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
+CONFIG_OR3_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_9=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE2800000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xFA000000
CONFIG_LBLAW3_NAME="BCSR"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_SCY_9=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_EHTR_1_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE2800000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_1=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="BCSR"
+CONFIG_BR3_OR3_BASE=0xFA000000
+CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_XACS_EXTENDED=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
+CONFIG_OR3_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_9=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE2800000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xFA000000
CONFIG_LBLAW3_NAME="BCSR"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="NAND"
+CONFIG_BR0_OR0_BASE=0xE2800000
+CONFIG_BR0_ERRORCHECKING_BOTH=y
+CONFIG_BR0_MACHINE_FCM=y
+CONFIG_OR0_SCY_1=y
+CONFIG_OR0_CSCT_8_CYCLE=y
+CONFIG_OR0_CST_ONE_CLOCK=y
+CONFIG_OR0_CHT_TWO_CLOCK=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FLASH"
+CONFIG_BR1_OR1_BASE=0xFE000000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_8_MBYTES=y
+CONFIG_OR1_SCY_9=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_EHTR_1_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="BCSR"
+CONFIG_BR3_OR3_BASE=0xFA000000
+CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_XACS_EXTENDED=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
+CONFIG_OR3_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="NAND"
-CONFIG_BR0_OR0_BASE=0xE2800000
-CONFIG_BR0_ERRORCHECKING_BOTH=y
-CONFIG_BR0_MACHINE_FCM=y
-CONFIG_BR0_PORTSIZE_8BIT=y
-CONFIG_OR0_AM_32_KBYTES=y
-CONFIG_OR0_SCY_1=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_CHT_TWO_CLOCK=y
-CONFIG_OR0_CSCT_8_CYCLE=y
-CONFIG_OR0_CST_ONE_CLOCK=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FLASH"
-CONFIG_BR1_OR1_BASE=0xFE000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_8_MBYTES=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_9=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xFA000000
CONFIG_LBLAW3_NAME="BCSR"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="NAND"
+CONFIG_BR0_OR0_BASE=0xE2800000
+CONFIG_BR0_ERRORCHECKING_BOTH=y
+CONFIG_BR0_MACHINE_FCM=y
+CONFIG_OR0_SCY_1=y
+CONFIG_OR0_CSCT_8_CYCLE=y
+CONFIG_OR0_CST_ONE_CLOCK=y
+CONFIG_OR0_CHT_TWO_CLOCK=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FLASH"
+CONFIG_BR1_OR1_BASE=0xFE000000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_8_MBYTES=y
+CONFIG_OR1_SCY_9=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_EHTR_1_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="BCSR"
+CONFIG_BR3_OR3_BASE=0xFA000000
+CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_XACS_EXTENDED=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
+CONFIG_OR3_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="NAND"
-CONFIG_BR0_OR0_BASE=0xE2800000
-CONFIG_BR0_ERRORCHECKING_BOTH=y
-CONFIG_BR0_MACHINE_FCM=y
-CONFIG_BR0_PORTSIZE_8BIT=y
-CONFIG_OR0_AM_32_KBYTES=y
-CONFIG_OR0_SCY_1=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_CHT_TWO_CLOCK=y
-CONFIG_OR0_CSCT_8_CYCLE=y
-CONFIG_OR0_CST_ONE_CLOCK=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FLASH"
-CONFIG_BR1_OR1_BASE=0xFE000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_8_MBYTES=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_9=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="NAND"
CONFIG_LBLAW1_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_1=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_LBLAW0_BASE=0xFE000000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_32_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_16_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_OPT_SPEC_READ=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_LBLAW3_BASE=0xF8008000
CONFIG_LBLAW3_NAME="PIB"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-# CONFIG_PCI is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_XAM_SET=y
CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="BCSR"
CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_XAM_SET=y
CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="PIB1"
CONFIG_BR2_OR2_BASE=0xF8008000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_32_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
+CONFIG_OR2_XAM_SET=y
CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_XAM_SET=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="PIB2"
CONFIG_BR3_OR3_BASE=0xF8010000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
+CONFIG_OR3_XAM_SET=y
CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_XAM_SET=y
CONFIG_OR3_TRLX_RELAXED=y
CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1"
+CONFIG_BOOTDELAY=6
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PING=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+# CONFIG_PCI is not set
+CONFIG_QE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
CONFIG_LBLAW3_BASE=0xF8008000
CONFIG_LBLAW3_NAME="PIB"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PCI_33M,PQ_MDS_PIB=1"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_XAM_SET=y
CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="BCSR"
CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_XAM_SET=y
CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="PIB1"
CONFIG_BR2_OR2_BASE=0xF8008000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_32_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
+CONFIG_OR2_XAM_SET=y
CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_XAM_SET=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="PIB2"
CONFIG_BR3_OR3_BASE=0xF8010000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
+CONFIG_OR3_XAM_SET=y
CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_XAM_SET=y
CONFIG_OR3_TRLX_RELAXED=y
CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="PCI_33M,PQ_MDS_PIB=1"
+CONFIG_BOOTDELAY=6
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_PCI=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PING=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_QE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
CONFIG_LBLAW3_BASE=0xF8008000
CONFIG_LBLAW3_NAME="PIB"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PCI_66M,PQ_MDS_PIB=1"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_XAM_SET=y
CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="BCSR"
CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_XAM_SET=y
CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="PIB1"
CONFIG_BR2_OR2_BASE=0xF8008000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_32_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
+CONFIG_OR2_XAM_SET=y
CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_XAM_SET=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="PIB2"
CONFIG_BR3_OR3_BASE=0xF8010000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
+CONFIG_OR3_XAM_SET=y
CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_XAM_SET=y
CONFIG_OR3_TRLX_RELAXED=y
CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="PCI_66M,PQ_MDS_PIB=1"
+CONFIG_BOOTDELAY=6
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_PCI=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PING=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_QE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
CONFIG_LBLAW3_BASE=0xF8008000
CONFIG_LBLAW3_NAME="PIB"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_XAM_SET=y
CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="BCSR"
CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_XAM_SET=y
CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="PIB1"
CONFIG_BR2_OR2_BASE=0xF8008000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_32_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
+CONFIG_OR2_XAM_SET=y
CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_XAM_SET=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="PIB2"
CONFIG_BR3_OR3_BASE=0xF8010000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
+CONFIG_OR3_XAM_SET=y
CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_XAM_SET=y
CONFIG_OR3_TRLX_RELAXED=y
CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE"
+CONFIG_BOOTDELAY=6
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_PCI=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PING=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_QE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
CONFIG_LBLAW3_BASE=0xF8008000
CONFIG_LBLAW3_NAME="PIB"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-# CONFIG_PCI is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_XAM_SET=y
CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="BCSR"
CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_XAM_SET=y
CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="PIB1"
CONFIG_BR2_OR2_BASE=0xF8008000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_32_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
+CONFIG_OR2_XAM_SET=y
CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_XAM_SET=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="PIB2"
CONFIG_BR3_OR3_BASE=0xF8010000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
+CONFIG_OR3_XAM_SET=y
CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_XAM_SET=y
CONFIG_OR3_TRLX_RELAXED=y
CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=6
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PING=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+# CONFIG_PCI is not set
+CONFIG_QE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
CONFIG_LBLAW1_BASE=0xE2400000
CONFIG_LBLAW1_NAME="BCSR"
CONFIG_LBLAW1_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xE2400000
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_CMD_DATE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW2_BASE=0xF0000000
CONFIG_LBLAW2_NAME="SDRAM"
CONFIG_LBLAW2_LENGTH_64_MBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
CONFIG_OR2_COLS_9=y
CONFIG_OR2_ROWS_13=y
CONFIG_OR2_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
+CONFIG_ACR_PIPE_DEP_4=y
+CONFIG_ACR_RPTCNT_4=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_PCI_ONE_PCI1=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_MARVELL=y
-CONFIG_NETDEVICES=y
CONFIG_TSEC_ENET=y
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_MPC8XXX_SPI=y
CONFIG_OF_LIBFDT=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW1_BASE=0xE2400000
CONFIG_LBLAW1_NAME="BCSR"
CONFIG_LBLAW1_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xE2400000
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_PCI_ONE_PCI1=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
-CONFIG_NETDEVICES=y
CONFIG_TSEC_ENET=y
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW1_BASE=0xE2400000
CONFIG_LBLAW1_NAME="BCSR"
CONFIG_LBLAW1_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xE2400000
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_PCI_ONE_PCI1=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPI=y
CONFIG_MPC8XXX_SPI=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xF0000000
CONFIG_LBLAW3_NAME="CF"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_16_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="VSC7385"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_OR1_AM_128_KBYTES=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_SETA_EXTERNAL=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="LED"
+CONFIG_BR2_OR2_BASE=0xF9000000
+CONFIG_OR2_AM_2_MBYTES=y
+CONFIG_OR2_SCY_9=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="CF"
+CONFIG_BR3_OR3_BASE=0xF0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_BR3_MACHINE_UPMA=y
+CONFIG_OR3_BI_BURSTINHIBIT=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFE000000"
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="VSC7385"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="LED"
-CONFIG_BR2_OR2_BASE=0xF9000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_2_MBYTES=y
-CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_9=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CF"
-CONFIG_BR3_OR3_BASE=0xF0000000
-CONFIG_BR3_MACHINE_UPMA=y
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_BI_BURSTINHIBIT=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xF0000000
CONFIG_LBLAW3_NAME="CF"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_16_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="VSC7385"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_OR1_AM_128_KBYTES=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_SETA_EXTERNAL=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="LED"
+CONFIG_BR2_OR2_BASE=0xF9000000
+CONFIG_OR2_AM_2_MBYTES=y
+CONFIG_OR2_SCY_9=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="CF"
+CONFIG_BR3_OR3_BASE=0xF0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_BR3_MACHINE_UPMA=y
+CONFIG_OR3_BI_BURSTINHIBIT=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="VSC7385"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="LED"
-CONFIG_BR2_OR2_BASE=0xF9000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_2_MBYTES=y
-CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_9=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CF"
-CONFIG_BR3_OR3_BASE=0xF0000000
-CONFIG_BR3_MACHINE_UPMA=y
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_BI_BURSTINHIBIT=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xF0000000
CONFIG_LBLAW3_NAME="CF"
CONFIG_LBLAW3_LENGTH_64_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_16_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="VSC7385"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_OR1_AM_128_KBYTES=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_SETA_EXTERNAL=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="LED"
+CONFIG_BR2_OR2_BASE=0xF9000000
+CONFIG_OR2_AM_2_MBYTES=y
+CONFIG_OR2_SCY_9=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="CF"
+CONFIG_BR3_OR3_BASE=0xF0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_BR3_MACHINE_UPMA=y
+CONFIG_OR3_BI_BURSTINHIBIT=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSEC1EP_3=y
CONFIG_SPCR_TSEC2EP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="VSC7385"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="LED"
-CONFIG_BR2_OR2_BASE=0xF9000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_2_MBYTES=y
-CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_9=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CF"
-CONFIG_BR3_OR3_BASE=0xF0000000
-CONFIG_BR3_MACHINE_UPMA=y
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_BI_BURSTINHIBIT=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW3_BASE=0xE0600000
CONFIG_LBLAW3_NAME="NAND"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="NAND"
+CONFIG_BR3_OR3_BASE=0xE0600000
+CONFIG_BR3_ERRORCHECKING_BOTH=y
+CONFIG_BR3_MACHINE_FCM=y
+CONFIG_OR3_BCTLD_NOT_ASSERTED=y
+CONFIG_OR3_SCY_1=y
+CONFIG_OR3_CST_ONE_CLOCK=y
+CONFIG_OR3_CHT_TWO_CLOCK=y
+CONFIG_OR3_RST_ONE_CLOCK=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_8=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="NAND"
-CONFIG_BR3_OR3_BASE=0xE0600000
-CONFIG_BR3_ERRORCHECKING_BOTH=y
-CONFIG_BR3_MACHINE_FCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_BCTLD_NOT_ASSERTED=y
-CONFIG_OR3_RST_ONE_CLOCK=y
-CONFIG_OR3_SCY_1=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_CHT_TWO_CLOCK=y
-CONFIG_OR3_CST_ONE_CLOCK=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_8=y
CONFIG_LBLAW3_BASE=0xE0600000
CONFIG_LBLAW3_NAME="NAND"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="NAND"
+CONFIG_BR3_OR3_BASE=0xE0600000
+CONFIG_BR3_ERRORCHECKING_BOTH=y
+CONFIG_BR3_MACHINE_FCM=y
+CONFIG_OR3_BCTLD_NOT_ASSERTED=y
+CONFIG_OR3_SCY_1=y
+CONFIG_OR3_CST_ONE_CLOCK=y
+CONFIG_OR3_CHT_TWO_CLOCK=y
+CONFIG_OR3_RST_ONE_CLOCK=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_8=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE"
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="NAND"
-CONFIG_BR3_OR3_BASE=0xE0600000
-CONFIG_BR3_ERRORCHECKING_BOTH=y
-CONFIG_BR3_MACHINE_FCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_BCTLD_NOT_ASSERTED=y
-CONFIG_OR3_RST_ONE_CLOCK=y
-CONFIG_OR3_SCY_1=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_CHT_TWO_CLOCK=y
-CONFIG_OR3_CST_ONE_CLOCK=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_8=y
CONFIG_LBLAW3_BASE=0xE0600000
CONFIG_LBLAW3_NAME="NAND"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="NAND"
+CONFIG_BR3_OR3_BASE=0xE0600000
+CONFIG_BR3_ERRORCHECKING_BOTH=y
+CONFIG_BR3_MACHINE_FCM=y
+CONFIG_OR3_BCTLD_NOT_ASSERTED=y
+CONFIG_OR3_SCY_1=y
+CONFIG_OR3_CST_ONE_CLOCK=y
+CONFIG_OR3_CHT_TWO_CLOCK=y
+CONFIG_OR3_RST_ONE_CLOCK=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_8=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="NAND"
-CONFIG_BR3_OR3_BASE=0xE0600000
-CONFIG_BR3_ERRORCHECKING_BOTH=y
-CONFIG_BR3_MACHINE_FCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_BCTLD_NOT_ASSERTED=y
-CONFIG_OR3_RST_ONE_CLOCK=y
-CONFIG_OR3_SCY_1=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_CHT_TWO_CLOCK=y
-CONFIG_OR3_CST_ONE_CLOCK=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_8=y
CONFIG_LBLAW2_BASE=0xF0000000
CONFIG_LBLAW2_NAME="VSC7385"
CONFIG_LBLAW2_LENGTH_128_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_SCY_9=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_EHTR_1_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_1=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_8=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE,PCIE"
CONFIG_CMD_FAT=y
CONFIG_FSL_SATA=y
CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_9=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_8=y
CONFIG_LBLAW2_BASE=0xF0000000
CONFIG_LBLAW2_NAME="VSC7385"
CONFIG_LBLAW2_LENGTH_128_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_SCY_9=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_EHTR_1_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_1=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="VSC7385"
+CONFIG_BR2_OR2_BASE=0xF0000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_15=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_SETA_EXTERNAL=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_8=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PCIE"
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_9=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_8=y
CONFIG_PHY_MARVELL=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_E1000=y
+CONFIG_QE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_E1000=y
+CONFIG_QE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_PHYLIB=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
+CONFIG_FSL_AHCI=y
CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DM=y
+CONFIG_FSL_AHCI=y
CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_SECURE_BOOT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_DM=y
+CONFIG_FSL_AHCI=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_FSL_AHCI=y
CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_REMOTE=y
+CONFIG_DM=y
+CONFIG_FSL_AHCI=y
CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_DM=y
+CONFIG_FSL_AHCI=y
CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_MII=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
# CONFIG_LBLAW2_ENABLE is not set
CONFIG_LBLAW3=y
# CONFIG_LBLAW3_ENABLE is not set
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0x80000000
+CONFIG_BR0_PORTSIZE_32BIT=y
+CONFIG_OR0_AM_1_GBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_8=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0x80000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_32BIT=y
-CONFIG_OR0_AM_1_GBYTES=y
-CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_8=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_RISCV=y
CONFIG_SYS_TEXT_BASE=0x80000000
-CONFIG_XIP=y
+CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_AX25_AE350=y
+CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_CACHE=y
-CONFIG_OF_SEPARATE=y
CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_RISCV=y
CONFIG_SYS_TEXT_BASE=0x80000000
-CONFIG_XIP=y
+CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_AX25_AE350=y
CONFIG_ARCH_RV64I=y
+CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_CACHE=y
-CONFIG_OF_SEPARATE=y
CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_DIAG=y
+CONFIG_DEFAULT_DEVICE_TREE="amcore"
CONFIG_ENV_IS_IN_FLASH=y
# CONFIG_NET is not set
-CONFIG_DM=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SERIAL=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_JFFS2=y
+CONFIG_DEFAULT_DEVICE_TREE="astro_mcf5373l"
# CONFIG_NET is not set
CONFIG_FPGA_ALTERA=y
CONFIG_FPGA_CYCLON2=y
CONFIG_EFI_PARTITION=y
CONFIG_OF_PRIOR_STAGE=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_BCMSTB=y
# CONFIG_EFI_LOADER is not set
CONFIG_CMD_SPI=y
CONFIG_OF_PRIOR_STAGE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_BCMSTB=y
CONFIG_DM_SPI_FLASH=y
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
+CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H6=y
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_PSCI_RESET is not set
-CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_TEXT_BASE=0x20060
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_VENDOR="bitmain"
CONFIG_SYS_BOARD="antminer_s9"
CONFIG_SYS_CONFIG_NAME="bitmain_antminer_s9"
-CONFIG_ARCH_ZYNQ=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_ENV_OFFSET=0x300000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xEFFFFF0
CONFIG_DEBUG_UART_BASE=0xe0001000
CONFIG_DEBUG_UART_CLOCK=50000000
CONFIG_DEBUG_UART=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xEFFFFF0
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQPL=y
CONFIG_DM_GPIO=y
CONFIG_SYS_TEXT_BASE=0x3f401000
CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
CONFIG_TARGET_BK4R1=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
CONFIG_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
CONFIG_DM_GPIO=y
CONFIG_VYBRID_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
CONFIG_LBLAW1_BASE=0xF0000000
CONFIG_LBLAW1_NAME="WINDOW1"
CONFIG_LBLAW1_LENGTH_256_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFFC00000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_4_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="WINDOW1"
+CONFIG_BR1_OR1_BASE=0xF0000000
+CONFIG_BR1_PORTSIZE_32BIT=y
+CONFIG_OR1_AM_256_KBYTES=y
+CONFIG_OR1_SETA_EXTERNAL=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFFC00000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_4_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="WINDOW1"
-CONFIG_BR1_OR1_BASE=0xF0000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_32BIT=y
-CONFIG_OR1_AM_256_KBYTES=y
-CONFIG_OR1_SETA_EXTERNAL=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_SYS_TEXT_BASE=0x60000000
-CONFIG_TARGET_CALIMAIN=y
-CONFIG_DA850_LOWLEVEL=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_BOOTDELAY=0
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="Calimain > "
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_STOP_STR="\x0b"
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DIAG=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x01C23000
-CONFIG_DA8XX_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_SYS_NS16550=y
CONFIG_X86=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=8
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
CONFIG_X86_RUN_64BIT=y
CONFIG_VENDOR_GOOGLE=y
CONFIG_TARGET_CHROMEBOOK_LINK64=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="chromebook_link"
-CONFIG_SPL_DM=y
CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_SPL_DM_RTC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
-CONFIG_SPL_TIMER=y
CONFIG_TPM_TIS_LPC=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_MV=y
+++ /dev/null
-CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80008000
-CONFIG_TARGET_CM_T3517=y
-CONFIG_EMIF4=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="CM-T3517 # "
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_EEPROM_LAYOUT=y
-CONFIG_EEPROM_LAYOUT_HELP_STRING="v1, v2, v3"
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),256k(u-boot-env),4m(kernel),-(fs)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_OMAP24_I2C_SPEED=400000
-CONFIG_LED_STATUS=y
-CONFIG_LED_STATUS_GPIO=y
-CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=186
-CONFIG_LED_STATUS_STATE=2
-CONFIG_LED_STATUS_BOOT_ENABLE=y
-CONFIG_LED_STATUS_BOOT=0
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_MII=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2D000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_AM35X=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_VIDEO_OMAP3=y
-CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PING=y
+CONFIG_DEFAULT_DEVICE_TREE="cobra5272"
CONFIG_MTD_NOR_FLASH=y
CONFIG_MII=y
CONFIG_BAUDRATE=19200
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_UUID=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_UUID=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_MV=y
CONFIG_SPI_FLASH=y
CONFIG_TARGET_CRS305_1G_4S=y
CONFIG_BUILD_TARGET="u-boot.kwb"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_DISPLAY_BOARDINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
-# CONFIG_CMD_USB is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_DEVICE=y
-# CONFIG_NAND is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_PCI_MVEBU=y
CONFIG_SYS_NS16550=y
CONFIG_KIRKWOOD_SPI=y
-# CONFIG_USB is not set
-# CONFIG_DM_USB is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_HOST_ETHER is not set
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DWC_AHSATA=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_DEVICE=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_SYS_TEXT_BASE=0xc1080000
-CONFIG_TARGET_EA20=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="ea20 > "
-CONFIG_CMD_ASKENV=y
-CONFIG_CRC32_VERIFY=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_DIAG=y
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_DA8XX_GPIO=y
-CONFIG_SYS_I2C_DAVINCI=y
-# CONFIG_MMC is not set
-CONFIG_NAND=y
-CONFIG_NAND_DAVINCI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DAVINCI_SPI=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282"
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=8
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_DATE=y
+CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282_internal"
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=8
+++ /dev/null
-CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80008000
-CONFIG_TARGET_ECO5PK=y
-CONFIG_EMIF4=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=10
-CONFIG_SPL_TEXT_BASE=0x40200000
-# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="ECO5-PK # "
-CONFIG_CMD_EEPROM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader-nand),1024k(uboot-nand),256k(params-nand),5120k(kernel),-(ubifs)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_OMAP24_I2C_SPEED=400000
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_OMAP is not set
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
CONFIG_DFU_RAM=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_DM_PCI_COMPAT=y
-CONFIG_RTC_MC146818=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Intel"
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ROCKCHIP_RK3368=y
+CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_BOOTSTAGE=y
CONFIG_SPL_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_TPL=y
-CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
CONFIG_TPL_BOOTROM_SUPPORT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_ROCKCHIP_RK322X=y
-CONFIG_TPL_ROCKCHIP_BACK_TO_BROM=y
+CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl.lds"
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
CONFIG_TARGET_EVB_RK3229=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_OPTEE=y
-CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl.lds"
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
CONFIG_ARCH_MTMIPS=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="cp.b 83000000 84000000 10000 && dhcp uEnv.txt && env import -t ${fileaddr} ${filesize} && run do_u_boot_init; reset"
+CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
CONFIG_CLK=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x9c000000
CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
CONFIG_ARCH_MTMIPS=y
CONFIG_BOOT_ROM=y
CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="cp.b 83000000 84000000 10000 && dhcp uEnv.txt && env import -t ${fileaddr} ${filesize} && run do_u_boot_init; reset"
+CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
CONFIG_CLK=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_MII=y
-CONFIG_CMD_MII_DRIVER=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_HASH=y
CONFIG_SYS_VPD_EEPROM_SIZE=1024
CONFIG_TARGET_GE_BX50V3=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=10
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
-CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0x1
CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_MV=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_SYS_TEXT_BASE=0x00008000
CONFIG_NR_DRAM_BANKS=0
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ENV_IS_IN_NVRAM=y
CONFIG_SCSI_AHCI=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
# CONFIG_MMC is not set
CONFIG_SCSI=y
CONFIG_CONS_INDEX=0
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="FPGA0"
CONFIG_LBLAW1_LENGTH_1_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FPGA"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_1_MBYTES=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y
-CONFIG_SICR_GPIO_A_GPIO=y
-CONFIG_SICR_GPIO_B_GPIO=y
CONFIG_SICR_IEEE1588_A_GPIO=y
CONFIG_SICR_GTM_GPIO=y
CONFIG_SICR_ETSEC2_GPIO=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_IOLOOP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CONS_INDEX=2
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FPGA"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_1_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="FPGA0"
CONFIG_LBLAW1_LENGTH_1_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FPGA"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_1_MBYTES=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y
-CONFIG_SICR_GPIO_A_GPIO=y
-CONFIG_SICR_GPIO_B_GPIO=y
CONFIG_SICR_IEEE1588_A_GPIO=y
CONFIG_SICR_GTM_GPIO=y
CONFIG_SICR_ETSEC2_GPIO=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_IOLOOP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CONS_INDEX=2
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FPGA"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_1_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF00000
+CONFIG_SYS_BOOTCOUNT_ADDR=0x9
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xE3000000
CONFIG_LBLAW3_NAME="CPLD"
CONFIG_LBLAW3_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFF800000
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_SCY_10=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="NAND"
+CONFIG_BR1_OR1_BASE=0xE1000000
+CONFIG_BR1_ERRORCHECKING_BOTH=y
+CONFIG_BR1_MACHINE_FCM=y
+CONFIG_OR1_SCY_4=y
+CONFIG_OR1_PGS_LARGE=y
+CONFIG_OR1_CSCT_8_CYCLE=y
+CONFIG_OR1_CST_ONE_CLOCK=y
+CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_RST_ONE_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="MRAM"
+CONFIG_BR2_OR2_BASE=0xE2000000
+CONFIG_OR2_AM_128_KBYTES=y
+CONFIG_OR2_SCY_7=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="CPLD"
+CONFIG_BR3_OR3_BASE=0xE3000000
+CONFIG_OR3_SCY_1=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_TRLX_RELAXED=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_CMD_UBI=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_I2C=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x9
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SPI=y
CONFIG_MPC8XXX_SPI=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFF800000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_8BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_10=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE1000000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_PGS_LARGE=y
-CONFIG_OR1_RST_ONE_CLOCK=y
-CONFIG_OR1_SCY_4=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="MRAM"
-CONFIG_BR2_OR2_BASE=0xE2000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_SCY_7=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CPLD"
-CONFIG_BR3_OR3_BASE=0xE3000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_32_KBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_SCY_1=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x020D8024
CONFIG_DEBUG_UART_BASE=0x021f0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x020D8024
CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_ESDHC=y
CONFIG_ARM=y
-CONFIG_ARCH_IMX8M=y
CONFIG_SPL_SYS_ICACHE_OFF=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_IMX8MQ_EVK=y
CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
CONFIG_SPL_SYS_ICACHE_OFF=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_IMX8=y
CONFIG_SYS_TEXT_BASE=0x80020000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
CONFIG_NR_DRAM_BANKS=3
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qm_mek/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_LOG=y
CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
CONFIG_SPL_SYS_ICACHE_OFF=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_IMX8=y
CONFIG_SYS_TEXT_BASE=0x80020000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_SYS_TEXT_BASE=0xc1080000
-CONFIG_TARGET_IPAM390=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL=y
-CONFIG_MISC_INIT_R=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot > "
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x00180000
-CONFIG_CMD_SPL_WRITE_SIZE=0x400
-CONFIG_CMD_ASKENV=y
-CONFIG_CRC32_VERIFY=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=davinci_nand.0:128k(u-boot-env),1408k(u-boot),128k(bootparms),384k(factory-info),4M(kernel),-(rootfs)"
-CONFIG_CMD_DIAG=y
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_DA8XX_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_NAND=y
-CONFIG_NAND_DAVINCI=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_SYS_NS16550=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xfff40000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
CONFIG_MPC85xx=y
CONFIG_TARGET_KMP204X=y
CONFIG_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xA0000000
CONFIG_LBLAW3_NAME="PAXE"
CONFIG_LBLAW3_LENGTH_512_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_64_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="PAXE"
+CONFIG_BR3_OR3_BASE=0xA0000000
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_2=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_ELBC_BR4_OR4=y
+CONFIG_BR4_OR4_NAME="BFTIC3"
+CONFIG_BR4_OR4_BASE=0xB0000000
+CONFIG_OR4_AM_256_MBYTES=y
+CONFIG_OR4_SCY_2=y
+CONFIG_OR4_CSNT_EARLIER=y
+CONFIG_OR4_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR4_TRLX_RELAXED=y
+CONFIG_OR4_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_EADC_2=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_BCH=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_64_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="PAXE"
-CONFIG_BR3_OR3_BASE=0xA0000000
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_OR3_SCY_2=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_ELBC_BR4_OR4=y
-CONFIG_BR4_OR4_NAME="BFTIC3"
-CONFIG_BR4_OR4_BASE=0xB0000000
-CONFIG_BR4_PORTSIZE_8BIT=y
-CONFIG_OR4_AM_256_MBYTES=y
-CONFIG_OR4_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR4_CSNT_EARLIER=y
-CONFIG_OR4_EAD_EXTRA=y
-CONFIG_OR4_SCY_2=y
-CONFIG_OR4_TRLX_RELAXED=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_LCRR_EADC_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xA0000000
CONFIG_LBLAW3_NAME="PAXE"
CONFIG_LBLAW3_LENGTH_512_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_64_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="PAXE"
+CONFIG_BR3_OR3_BASE=0xA0000000
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_2=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_EADC_2=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_64_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="PAXE"
-CONFIG_BR3_OR3_BASE=0xA0000000
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_OR3_SCY_2=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_LCRR_EADC_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xfff40000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
CONFIG_MPC85xx=y
CONFIG_TARGET_KMP204X=y
CONFIG_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_OR2_SCY_2=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="APP2"
+CONFIG_BR3_OR3_BASE=0xB0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_4=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_2=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_4_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="APP2"
-CONFIG_BR3_OR3_BASE=0xB0000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_SCY_4=y
-CONFIG_OR3_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW2_BASE=0xA0000000
CONFIG_LBLAW2_NAME="APP1"
CONFIG_LBLAW2_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_OR2_SCY_2=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_2=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_4_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="APP2"
+CONFIG_BR3_OR3_BASE=0xB0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_5=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1"
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_BCH=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="APP2"
-CONFIG_BR3_OR3_BASE=0xB0000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_SCY_5=y
-CONFIG_OR3_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_OR2_SCY_2=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="APP2"
+CONFIG_BR3_OR3_BASE=0xB0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_4=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_2=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_4_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="APP2"
-CONFIG_BR3_OR3_BASE=0xB0000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_SCY_4=y
-CONFIG_OR3_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_BR2_PORTSIZE_16BIT=y
+CONFIG_BR2_MACHINE_UPMA=y
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="APP2"
+CONFIG_BR3_OR3_BASE=0xB0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_3=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR3_TRLX_RELAXED=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="KMVECT1"
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_UPMA=y
-CONFIG_BR2_PORTSIZE_16BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="APP2"
-CONFIG_BR3_OR3_BASE=0xB0000000
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_SCY_3=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_ROCKCHIP_RK3036=y
CONFIG_TARGET_KYLIN_RK3036=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x0
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0x20068000
CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_NR_DRAM_BANKS=1
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rk3036-kylin.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_LINKIT_SMART_7688=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SPI_FLASH=y
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SPI_FLASH=y
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
# CONFIG_SPI_FLASH_BAR is not set
CONFIG_PHYLIB=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PHYLIB=y
CONFIG_PHY_AQUANTIA=y
CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C
# CONFIG_CMD_BMODE is not set
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C
CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041
CONFIG_FSL_ESDHC=y
CONFIG_NAND=y
+++ /dev/null
-CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80008000
-# CONFIG_SPL_GPIO_SUPPORT is not set
-CONFIG_TARGET_MCX=y
-CONFIG_EMIF4=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SPL_TEXT_BASE=0x40200000
-# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="mcx # "
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),6m(k_recovery),8m(fs_recovery),-(common_data)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT_OMAP=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_ETHER_MCS7830=y
-CONFIG_VIDEO_OMAP3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
CONFIG_NETCONSOLE=y
CONFIG_SPL_DM=y
-CONFIG_DM_GPIO=y
CONFIG_XILINX_GPIO=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LBLAW2_BASE=0xFBFF8000
CONFIG_LBLAW2_NAME="CPLD"
CONFIG_LBLAW2_LENGTH_32_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFC000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_64_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_4=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="SJA1000"
+CONFIG_BR1_OR1_BASE=0xFBFF0000
+CONFIG_OR1_SCY_5=y
+CONFIG_OR1_EHTR_1_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="CPLD"
+CONFIG_BR2_OR2_BASE=0xFBFF8000
+CONFIG_OR2_SCY_4=y
+CONFIG_OR2_EHTR_1_CYCLE=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=5
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFC000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_64_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_4=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="SJA1000"
-CONFIG_BR1_OR1_BASE=0xFBFF0000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
-CONFIG_OR1_SCY_5=y
-CONFIG_OR1_EHTR_1_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="CPLD"
-CONFIG_BR2_OR2_BASE=0xFBFF8000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_32_KBYTES=y
-CONFIG_OR2_SCY_4=y
-CONFIG_OR2_EHTR_1_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
+CONFIG_CMD_DHCP=y
+# CONFIG_NET_TFTP_VARS is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:1m(UBoot),256k(Env),256k(Env.bk)"
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
+CONFIG_MSCC_SERVAL_SWITCH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_LZMA=y
-CONFIG_CMD_DHCP=y
-# CONFIG_NET_TFTP_VARS is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_PING=y
-CONFIG_MSCC_SERVAL_SWITCH=y
+++ /dev/null
-CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80008000
-CONFIG_TARGET_MT_VENTOUX=y
-CONFIG_EMIF4=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SPL_TEXT_BASE=0x40200000
-# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="mt_ventoux => "
-CONFIG_CMD_EEPROM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),8m(ubisystem),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_SPARTAN3=y
-CONFIG_SYS_OMAP24_I2C_SPEED=400000
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT_OMAP=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_OMAP3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_FPGA_ALTERA=y
CONFIG_FPGA_CYCLON2=y
-CONFIG_DM=y
-CONFIG_DM_MMC=y
CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_SYS_VPD_EEPROM_I2C_BUS=2
CONFIG_SYS_VPD_EEPROM_SIZE=1024
CONFIG_NR_DRAM_BANKS=2
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ge/mx53ppd/imximage.cfg"
CONFIG_BOOTCOUNT_EXT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=10
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5"
-CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MII=y
CONFIG_RTC_S35392A=y
CONFIG_USB=y
CONFIG_USB_EHCI_MX5=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_IMX_WATCHDOG=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x81000100
CONFIG_NR_DRAM_BANKS=2
+CONFIG_BOOTSTAGE_STASH_ADDR=0x83000000
CONFIG_DEBUG_UART_BASE=0x70006000
CONFIG_DEBUG_UART_CLOCK=408000000
CONFIG_TEGRA124=y
CONFIG_BOOTSTAGE=y
CONFIG_SPL_BOOTSTAGE=y
CONFIG_BOOTSTAGE_STASH=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x83000000
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_LOG_DEFAULT_LEVEL=7
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-hobbit"
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX7=y
-CONFIG_DM_GPIO=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
-CONFIG_DM_MMC=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_MII is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-hobbit"
CONFIG_DFU_MMC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="ask"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX7=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_MMC=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_DFU=y
# CONFIG_CMD_MII is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_DFU_MMC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb"
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX7=y
-CONFIG_DM_GPIO=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
-CONFIG_DM_MMC=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_MII is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_DFU_MMC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_X86=y
CONFIG_SYS_TEXT_BASE=0x1110000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_MAX_CPUS=2
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=8
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SPL_SPI_SUPPORT=y
CONFIG_X86_RUN_64BIT=y
CONFIG_TARGET_QEMU_X86_64=y
CONFIG_DEBUG_UART=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx"
-CONFIG_SPL_DM=y
CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
CONFIG_CPU=y
CONFIG_NVME=y
CONFIG_SPL_DM_RTC=y
CONFIG_SPI=y
-CONFIG_SPL_TIMER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a7795-salvator-x.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_RCAR_GEN3=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a7795-h3ulcb.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a77965-salvator-x.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_RCAR_GEN3=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a77965-m3nulcb.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a7796-salvator-x.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_RCAR_GEN3=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a7796-m3ulcb.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a77970-eagle.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a77990-ebisu.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a77995-draak.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SYS_TEXT_BASE=0
CONFIG_NR_DRAM_BANKS=1
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_SANDBOX64=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_SYS_TEXT_BASE=0
CONFIG_NR_DRAM_BANKS=1
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_SYS_TEXT_BASE=0
CONFIG_NR_DRAM_BANKS=1
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_SYS_TEXT_BASE=0
CONFIG_NR_DRAM_BANKS=1
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CONSOLE_RECORD=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_SANDBOX_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_BOOTSTAGE_STASH=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_LBLAW0_BASE=0xFF800000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_8_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFF800000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_PCI_64BIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFF800000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW0_BASE=0xFF800000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_8_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFF800000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_PCI_64BIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFF800000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_LBLAW0_BASE=0xFF800000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_8_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFF800000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=6
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFF800000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_ARM=y
+CONFIG_SPL_SYS_ICACHE_OFF=y
+CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_SPL_SYS_THUMB_BUILD=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_SPL_SYS_ICACHE_OFF=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23000000
CONFIG_TARGET_SMARTWEB=y
CONFIG_ARM=y
CONFIG_ARCH_SOCFPGA=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
CONFIG_IDENT_STRING="socfpga_arria10"
+CONFIG_SPL_FS_FAT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_SPL_FIT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FPGA_SUPPORT=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
-CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SPL_DM_MMC=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_FS_LOADER=y
-CONFIG_FPGA_SOCFPGA=y
-CONFIG_SPL_FIT=y
-CONFIG_FIT=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
+CONFIG_FS_LOADER=y
CONFIG_DM_MMC=y
-CONFIG_MTD_DEVICE=y
CONFIG_MMC_DW=y
+CONFIG_MTD_DEVICE=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
-CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ARM=y
CONFIG_ARCH_SOCFPGA=y
CONFIG_TARGET_SOCFPGA_IS1=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_USE_BOOTARGS=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_ARM=y
CONFIG_ARCH_SOCFPGA=y
CONFIG_TARGET_SOCFPGA_SR1500=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)"
+CONFIG_DEFAULT_DEVICE_TREE="stmark2"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_CS=y
CONFIG_ENV_SPI_CS=1
# CONFIG_NET is not set
CONFIG_MTD_DEVICE=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=50000000
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
CONFIG_REGEX=y
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="FPGA0"
CONFIG_LBLAW1_LENGTH_1_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FPGA"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_1_MBYTES=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_5=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
-CONFIG_SICR_ETSEC1_A_TSEC2=y
-CONFIG_SICR_GPIO_A_GPIO=y
-CONFIG_SICR_GPIO_B_GPIO=y
CONFIG_SICR_IEEE1588_A_GPIO=y
CONFIG_SICR_GTM_GPIO=y
CONFIG_SICR_ETSEC2_GPIO=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_IOLOOP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CONS_INDEX=2
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FPGA"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_1_MBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_5=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="FPGA0"
CONFIG_LBLAW1_LENGTH_1_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FPGA"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_1_MBYTES=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_5=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
-CONFIG_SICR_ETSEC1_A_TSEC2=y
-CONFIG_SICR_GPIO_A_GPIO=y
-CONFIG_SICR_GPIO_B_GPIO=y
CONFIG_SICR_IEEE1588_A_GPIO=y
CONFIG_SICR_GTM_GPIO=y
CONFIG_SICR_ETSEC2_GPIO=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_IOLOOP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CONS_INDEX=2
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FPGA"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_1_MBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_5=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="FPGA0"
CONFIG_LBLAW1_LENGTH_1_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FPGA"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_1_MBYTES=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_5=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
-CONFIG_SICR_ETSEC1_A_TSEC2=y
-CONFIG_SICR_GPIO_A_GPIO=y
-CONFIG_SICR_GPIO_B_GPIO=y
CONFIG_SICR_IEEE1588_A_GPIO=y
CONFIG_SICR_GTM_GPIO=y
CONFIG_SICR_ETSEC2_GPIO=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_IOLOOP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CONS_INDEX=2
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FPGA"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_1_MBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_5=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_LBLAW1_BASE=0xE0600000
CONFIG_LBLAW1_NAME="FPGA0"
CONFIG_LBLAW1_LENGTH_1_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_8_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="FPGA"
+CONFIG_BR1_OR1_BASE=0xE0600000
+CONFIG_BR1_PORTSIZE_16BIT=y
+CONFIG_OR1_AM_1_MBYTES=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_SCY_5=y
+CONFIG_OR1_CSNT_EARLIER=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_DPM=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
-CONFIG_SICR_ETSEC1_A_TSEC2=y
-CONFIG_SICR_GPIO_A_GPIO=y
-CONFIG_SICR_GPIO_B_GPIO=y
CONFIG_SICR_IEEE1588_A_GPIO=y
CONFIG_SICR_GTM_GPIO=y
CONFIG_SICR_ETSEC2_GPIO=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_SPCR_TSECEP_3=y
+CONFIG_LCRR_DBYP_PLL_BYPASSED=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_CMD_IOLOOP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_CONS_INDEX=2
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FPGA"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_1_MBYTES=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_SCY_5=y
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_EHTR_NORMAL=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_BR2_PORTSIZE_16BIT=y
+CONFIG_BR2_MACHINE_UPMA=y
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="APP2"
+CONFIG_BR3_OR3_BASE=0xB0000000
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_3=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR3_TRLX_RELAXED=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SUVD3"
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_UPMA=y
-CONFIG_BR2_PORTSIZE_16BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="APP2"
-CONFIG_BR3_OR3_BASE=0xB0000000
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_SCY_3=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_ARM=y
CONFIG_SYS_VENDOR="opalkelly"
CONFIG_SYS_CONFIG_NAME="syzygy_hub"
-CONFIG_ARCH_ZYNQ=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
CONFIG_ARM=y
+CONFIG_SPL_SYS_ICACHE_OFF=y
+CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_SYS_THUMB_BUILD=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_SPL_SYS_ICACHE_OFF=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_ARCH_AT91=y
CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
CONFIG_SYS_TEXT_BASE=0x21000000
CONFIG_ARM=y
CONFIG_SYS_VENDOR="topic"
CONFIG_SYS_CONFIG_NAME="topic_miami"
-CONFIG_ARCH_ZYNQ=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
CONFIG_ARM=y
CONFIG_SYS_VENDOR="topic"
CONFIG_SYS_CONFIG_NAME="topic_miami"
-CONFIG_ARCH_ZYNQ=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
CONFIG_ARM=y
CONFIG_SYS_VENDOR="topic"
CONFIG_SYS_CONFIG_NAME="topic_miami"
-CONFIG_ARCH_ZYNQ=y
CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
CONFIG_TQMA6S=y
CONFIG_WRU4=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=0
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW2_BASE=0xA0000000
CONFIG_LBLAW2_NAME="APP1"
CONFIG_LBLAW2_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_OR2_SCY_2=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_2=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_4_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF0000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_256_MBYTES=y
+CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
+CONFIG_BR1_OR1_BASE=0xE8000000
+CONFIG_OR1_AM_128_MBYTES=y
+CONFIG_OR1_SCY_2=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="APP1"
+CONFIG_BR2_OR2_BASE=0xA0000000
+CONFIG_OR2_AM_256_MBYTES=y
+CONFIG_OR2_SCY_2=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="APP2"
+CONFIG_BR3_OR3_BASE=0xB0000000
+CONFIG_OR3_AM_256_MBYTES=y
+CONFIG_OR3_SCY_2=y
+CONFIG_OR3_CSNT_EARLIER=y
+CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR3_TRLX_RELAXED=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
+CONFIG_LCRR_EADC_1=y
+CONFIG_LCRR_CLKDIV_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_UBIFS is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
# CONFIG_PCI is not set
+CONFIG_QE=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF0000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_256_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
-CONFIG_BR1_OR1_BASE=0xE8000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_128_MBYTES=y
-CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="APP1"
-CONFIG_BR2_OR2_BASE=0xA0000000
-CONFIG_BR2_MACHINE_GPCM=y
-CONFIG_BR2_PORTSIZE_8BIT=y
-CONFIG_OR2_AM_256_MBYTES=y
-CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_OR2_SCY_2=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_4_CYCLE=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="APP2"
-CONFIG_BR3_OR3_BASE=0xB0000000
-CONFIG_BR3_MACHINE_GPCM=y
-CONFIG_BR3_PORTSIZE_8BIT=y
-CONFIG_OR3_AM_256_MBYTES=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_SCY_2=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_4_CYCLE=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_2=y
+++ /dev/null
-CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80008000
-CONFIG_TARGET_TWISTER=y
-CONFIG_EMIF4=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=10
-CONFIG_SPL_TEXT_BASE=0x40200000
-# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="twister => "
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x00800000
-CONFIG_CMD_SPL_WRITE_SIZE=0x400
-CONFIG_CMD_EEPROM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_OMAP24_I2C_SPEED=400000
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_MII=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT_OMAP=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
CONFIG_TARGET_DART_6UL=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=8
CONFIG_SPL=y
-# CONFIG_CMD_DEKBLOB is not set
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=8
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_NET=y
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-dart-6ul"
CONFIG_LBLAW1_BASE=0x61000000
CONFIG_LBLAW1_NAME="NAND"
CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_MARVELL=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_MACHINE_GPCM=y
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
CONFIG_OR0_SCY_5=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y
CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="NAND"
CONFIG_BR1_OR1_BASE=0x61000000
CONFIG_BR1_ERRORCHECKING_BOTH=y
CONFIG_BR1_MACHINE_FCM=y
-CONFIG_BR1_PORTSIZE_8BIT=y
-CONFIG_OR1_AM_32_KBYTES=y
CONFIG_OR1_BCTLD_NOT_ASSERTED=y
-CONFIG_OR1_RST_ONE_CLOCK=y
CONFIG_OR1_SCY_2=y
-CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_CHT_TWO_CLOCK=y
+CONFIG_OR1_RST_ONE_CLOCK=y
+CONFIG_OR1_TRLX_RELAXED=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="NVRAM"
CONFIG_BR2_OR2_BASE=0x60000000
-CONFIG_BR2_PORTSIZE_8BIT=y
CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_EAD_EXTRA=y
CONFIG_OR2_SCY_3=y
+CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_XACS_EXTENDED=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="SRAM"
CONFIG_BR3_OR3_BASE=0x62000000
CONFIG_BR3_PORTSIZE_16BIT=y
CONFIG_OR3_AM_32_MBYTES=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_EAD_EXTRA=y
CONFIG_OR3_SCY_15=y
+CONFIG_OR3_CSNT_EARLIER=y
CONFIG_OR3_XACS_EXTENDED=y
CONFIG_OR3_TRLX_RELAXED=y
CONFIG_OR3_EHTR_8_CYCLE=y
+CONFIG_OR3_EAD_EXTRA=y
+CONFIG_HID0_FINAL_EMCP=y
+CONFIG_HID0_FINAL_ICE=y
+CONFIG_HID2_HBE=y
+CONFIG_ACR_PIPE_DEP_4=y
+CONFIG_ACR_RPTCNT_4=y
CONFIG_LCRR_EADC_3=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=6
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+# CONFIG_MMC is not set
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_PHY_MARVELL=y
+CONFIG_TSEC_ENET=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
CONFIG_LBLAW1_BASE=0xF0000000
CONFIG_LBLAW1_NAME="WINDOW1"
CONFIG_LBLAW1_LENGTH_256_KBYTES=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xF8000000
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_128_MBYTES=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="WINDOW1"
+CONFIG_BR1_OR1_BASE=0xF0000000
+CONFIG_BR1_PORTSIZE_32BIT=y
+CONFIG_OR1_AM_256_KBYTES=y
+CONFIG_OR1_SETA_EXTERNAL=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
+CONFIG_LCRR_CLKDIV_4=y
CONFIG_PCI_64BIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BAUDRATE=9600
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF8000000
-CONFIG_BR0_MACHINE_GPCM=y
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_128_MBYTES=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="WINDOW1"
-CONFIG_BR1_OR1_BASE=0xF0000000
-CONFIG_BR1_MACHINE_GPCM=y
-CONFIG_BR1_PORTSIZE_32BIT=y
-CONFIG_OR1_AM_256_KBYTES=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_LCRR_CLKDIV_4=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xD2801FF8
CONFIG_IDENT_STRING="-SPEAr"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0xD2801FF8
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_SPARTAN3=y
CONFIG_SYS_I2C_DW=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_SYS_TEXT_BASE=0x100000
CONFIG_ENV_SIZE=0x190
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_SYS_TEXT_BASE=0xFFFC0000
CONFIG_ENV_SIZE=0x190
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_ENV_SIZE=0x190
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
+CONFIG_SYS_MALLOC_LEN=0x1000
CONFIG_DEBUG_UART_BASE=0x0
CONFIG_DEBUG_UART_CLOCK=0
# CONFIG_ZYNQ_DDRC_INIT is not set
-CONFIG_SYS_MALLOC_LEN=0x1000
# CONFIG_CMD_ZYNQ is not set
CONFIG_DEBUG_UART=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+++ /dev/null
-LED display internal API
-=======================================
-
-This README describes the LED display API.
-
-The API is defined by the include file include/led-display.h
-
-The first step in to define CONFIG_CMD_DISPLAY in the board config file.
-Then you need to provide the following functions to access LED display:
-
-void display_set(int cmd);
-
-This function should control the state of the LED display. Argument is
-an ORed combination of the following values:
- DISPLAY_CLEAR -- clear the display
- DISPLAY_HOME -- set the position to the beginning of display
-
-int display_putc(char c);
-
-This function should display it's parameter on the LED display in the
-current position. Returns the displayed character on success or -1 in
-case of failure.
-
-With this functions defined 'display' command will display it's
-arguments on the LED display (or clear the display if called without
-arguments).
STMicroelectronics STM32MP1 clock tree initialization
=====================================================
-The STM32MP clock tree initialization is based on device tree information
-for RCC IP and on fixed clocks.
+The STM32MP1 clock tree initialization is based on device tree information
+for RCC IP node (st,stm32mp1-rcc) and on fixed-clock nodes.
--------------------------------
-RCC CLOCK = st,stm32mp1-rcc-clk
--------------------------------
+RCC IP = st,stm32mp1-rcc
+========================
The RCC IP is both a reset and a clock controller but this documentation only
describes the fields added for clock tree initialization which are not present
-in Linux binding.
+in Linux binding for compatible "st,stm32mp1-rcc" defined in st,stm32mp1-rcc.txt
+file.
-Please refer to ../mfd/st,stm32-rcc.txt for all the other properties common
-with Linux.
+The added properties for clock tree initialization are:
Required properties:
+- st,clksrc : The clock sources configuration array in a platform specific
+ order.
-- compatible: Should be "st,stm32mp1-rcc-clk"
+ For the STM32MP15x family there are 9 clock sources selector which are
+ configured in the following order:
+ MPU AXI MCU PLL12 PLL3 PLL4 RTC MCO1 MCO2
-- st,clksrc : The clock source in this order
+ Clock source configuration values are defined by macros CLK_<NAME>_<SOURCE>
+ from dt-bindings/clock/stm32mp1-clksrc.h.
- for STM32MP15x: 9 clock sources are requested
- MPU AXI MCU PLL12 PLL3 PLL4 RTC MCO1 MCO2
-
- with value equals to RCC clock specifier as defined in
- dt-bindings/clock/stm32mp1-clksrc.h: CLK_<NAME>_<SOURCE>
-
-- st,clkdiv : The div parameters in this order
- for STM32MP15x: 11 dividers value are requested
+ Example:
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+- st,clkdiv : The clock main dividers value specified in an array
+ in a platform specific order.
+
+ When used, it shall describe the whole clock dividers tree.
+
+ For the STM32MP15x family there are 11 dividers values expected.
+ They shall be configured in the following order:
MPU AXI MCU APB1 APB2 APB3 APB4 APB5 RTC MCO1 MCO2
- with DIV coding defined in RCC associated register RCC_xxxDIVR
-
- most the case, it is:
+ The each divider value uses the DIV coding defined in RCC associated
+ register RCC_xxxDIVR. In most the case, it is:
0x0: not divided
0x1: division by 2
0x2: division by 4
0x3: division by 8
...
- but for RTC MCO1 MCO2, the coding is different:
+ Note that for RTC MCO1 MCO2, the coding is different:
0x0: not divided
0x1: division by 2
0x2: division by 3
0x3: division by 4
...
-Optional Properties:
-- st,pll
- PLL children node for PLL1 to PLL4 : (see ref manual for details)
- with associated index 0 to 3 (st,pll@0 to st,pll@4)
- PLLx is off when the associated node is absent
+ Example:
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
- - Sub-nodes:
+Optional Properties:
+- st,pll : A specific PLL configuration, including frequency.
- - cfg: The parameters for PLL configuration in this order:
- DIVM DIVN DIVP DIVQ DIVR Output
+ PLL children nodes for PLL1 to PLL4 (see ref manual for details)
+ are listed with associated index 0 to 3 (st,pll@0 to st,pll@3).
+ PLLx is off when the associated node is absent.
- with DIV value as defined in RCC spec:
- 0x0: bypass (division by 1)
- 0x1: division by 2
- 0x2: division by 3
- 0x3: division by 4
- ...
+ Here are the available properties for each PLL node:
- and Output = bitfield for each output value = 1:ON/0:OFF
- BIT(0) => output P : DIVPEN
- BIT(1) => output Q : DIVQEN
- BIT(2) => output R : DIVREN
- NB : macro PQR(p,q,r) can be used to build this value
- with p,p,r = 0 or 1
+ - cfg: The parameters for PLL configuration in the following order:
+ DIVM DIVN DIVP DIVQ DIVR Output.
- - frac : Fractional part of the multiplication factor
- (optional, PLL is in integer mode when absent)
+ DIVx values are defined as in RCC spec:
+ 0x0: bypass (division by 1)
+ 0x1: division by 2
+ 0x2: division by 3
+ 0x3: division by 4
+ ...
- - csg : Clock Spreading Generator (optional)
- with parameters in this order:
- MOD_PER INC_STEP SSCG_MODE
+ Output contains a bitfield for each output value (1:ON/0:OFF)
+ BIT(0) => output P : DIVPEN
+ BIT(1) => output Q : DIVQEN
+ BIT(2) => output R : DIVREN
+ NB: macro PQR(p,q,r) can be used to build this value
+ with p,q,r = 0 or 1.
+
+ - frac : Fractional part of the multiplication factor
+ (optional, PLL is in integer mode when absent).
+
+ - csg : Clock Spreading Generator (optional) with parameters in the
+ following order: MOD_PER INC_STEP SSCG_MODE.
+
+ MOD_PER: Modulation Period Adjustment
+ INC_STEP: Modulation Depth Adjustment
+ SSCG_MODE: Spread spectrum clock generator mode, with associated
+ defined from stm32mp1-clksrc.h:
+ - SSCG_MODE_CENTER_SPREAD = 0
+ - SSCG_MODE_DOWN_SPREAD = 1
+
+ Example:
+ st,pll@0 {
+ cfg = < 1 53 0 0 0 1 >;
+ frac = < 0x810 >;
+ };
+ st,pll@1 {
+ cfg = < 1 43 1 0 0 PQR(0,1,1) >;
+ csg = < 10 20 1 >;
+ };
+ st,pll@2 {
+ cfg = < 2 85 3 13 3 0 >;
+ csg = < 10 20 SSCG_MODE_CENTER_SPREAD >;
+ };
+ st,pll@3 {
+ cfg = < 2 78 4 7 9 3 >;
+ };
- * MOD_PER: Modulation Period Adjustment
- * INC_STEP: Modulation Depth Adjustment
- * SSCG_MODE: Spread spectrum clock generator mode
- you can use associated defines from stm32mp1-clksrc.h
- * SSCG_MODE_CENTER_SPREAD = 0
- * SSCG_MODE_DOWN_SPREAD = 1
+- st,pkcs : used to configure the peripherals kernel clock selection.
+ The property is a list of peripheral kernel clock source identifiers defined
+ by macros CLK_<KERNEL-CLOCK>_<PARENT-CLOCK> as defined by header file
+ dt-bindings/clock/stm32mp1-clksrc.h.
-- st,pkcs : used to configure the peripherals kernel clock selection
- containing a list of peripheral kernel clock source identifier as defined
- in the file dt-bindings/clock/stm32mp1-clksrc.h
+ st,pkcs may not list all the kernel clocks and has no ordering requirements.
Example:
+ st,pkcs = <
+ CLK_STGEN_HSE
+ CLK_CKPER_HSI
+ CLK_USBPHY_PLL2P
+ CLK_DSI_PLL2Q
+ CLK_I2C46_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ >;
- rcc: rcc@50000000 {
- compatible = "syscon", "simple-mfd";
-
- reg = <0x50000000 0x1000>;
-
- rcc_clk: rcc-clk@50000000 {
- #clock-cells = <1>;
- compatible = "st,stm32mp1-rcc-clk";
-
- st,clksrc = < CLK_MPU_PLL1P
- CLK_AXI_PLL2P
- CLK_MCU_HSI
- CLK_PLL12_HSE
- CLK_PLL3_HSE
- CLK_PLL4_HSE
- CLK_RTC_HSE
- CLK_MCO1_DISABLED
- CLK_MCO2_DISABLED
- >;
-
- st,clkdiv = <
- 1 /*MPU*/
- 0 /*AXI*/
- 0 /*MCU*/
- 1 /*APB1*/
- 1 /*APB2*/
- 1 /*APB3*/
- 1 /*APB4*/
- 5 /*APB5*/
- 23 /*RTC*/
- 0 /*MCO1*/
- 0 /*MCO2*/
- >;
-
- st,pll@0 {
- cfg = < 1 53 0 0 0 1 >;
- frac = < 0x810 >;
- };
- st,pll@1 {
- cfg = < 1 43 1 0 0 PQR(0,1,1) >;
- csg = < 10 20 1 >;
- };
- st,pll@2 {
- cfg = < 2 85 3 13 3 0 >;
- csg = < 10 20 SSCG_MODE_CENTER_SPREAD >;
- };
- st,pll@3 {
- cfg = < 2 78 4 7 9 3 >;
- };
- st,pkcs = <
- CLK_STGEN_HSE
- CLK_CKPER_HSI
- CLK_USBPHY_PLL2P
- CLK_DSI_PLL2Q
- >;
- };
- };
-
---------------------------
other clocks = fixed-clock
---------------------------
+==========================
+
The clock tree is also based on 5 fixed-clock in clocks node
used to define the state of associated ST32MP1 oscillators:
-- clk-lsi
-- clk-lse
-- clk-hsi
-- clk-hse
-- clk-csi
+ - clk-lsi
+ - clk-lse
+ - clk-hsi
+ - clk-hse
+ - clk-csi
At boot the clock tree initialization will
-- enable the oscillator present in device tree
-- disable HSI oscillator if the node is absent (always activated by bootrom)
+ - enable oscillators present in device tree
+ - disable HSI oscillator if the node is absent (always activated by bootrom)
Optional properties :
a) for external oscillator: "clk-lse", "clk-hse"
- 4 optional fields are managed
- - "st,bypass" Configure the oscillator bypass mode (HSEBYP, LSEBYP)
- - "st,digbypass" Configure the bypass mode as full-swing digital signal
- (DIGBYP)
- - "st,css" Activate the clock security system (HSECSSON, LSECSSON)
- - "st,drive" (only for LSE) value of the drive for the oscillator
- (see LSEDRV_ define in the file dt-bindings/clock/stm32mp1-clksrc.h)
-
- Example board file:
+ 4 optional fields are managed
+ - "st,bypass" configures the oscillator bypass mode (HSEBYP, LSEBYP)
+ - "st,digbypass" configures the bypass mode as full-swing digital
+ signal (DIGBYP)
+ - "st,css" activates the clock security system (HSECSSON, LSECSSON)
+ - "st,drive" (only for LSE) contains the value of the drive for the
+ oscillator (see LSEDRV_ defined in the file
+ dt-bindings/clock/stm32mp1-clksrc.h)
+ Example board file:
/ {
clocks {
clk_hse: clk-hse {
b) for internal oscillator: "clk-hsi"
- internally HSI clock is fixed to 64MHz for STM32MP157 soc
- in device tree clk-hsi is the clock after HSIDIV (ck_hsi in RCC doc)
- So this clock frequency is used to compute the expected HSI_DIV
- for the clock tree initialisation
-
- ex: for HSIDIV = /1
+ Internally HSI clock is fixed to 64MHz for STM32MP157 SoC.
+ In device tree, clk-hsi is the clock after HSIDIV (clk_hsi in RCC
+ doc). So this clock frequency is used to compute the expected HSI_DIV
+ for the clock tree initialization.
+ Example with HSIDIV = /1:
/ {
clocks {
clk_hsi: clk-hsi {
};
};
- ex: for HSIDIV = /2
-
+ Example with HSIDIV = /2
/ {
clocks {
clk_hsi: clk-hsi {
clock-frequency = <32000000>;
};
};
+
+Example of clock tree initialization
+====================================
+
+/ {
+ clocks {
+ u-boot,dm-pre-reloc;
+ clk_hse: clk-hse {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ st,digbypass;
+ };
+
+ clk_hsi: clk-hsi {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+ };
+
+ soc {
+
+ rcc: rcc@50000000 {
+ u-boot,dm-pre-reloc;
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4Q
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+ frac = < 0x800 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU),
+ R = 533 (DDR) */
+ pll2: st,pll@1 {
+ cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+ frac = < 0x1400 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+ frac = < 0x1a04 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll@3 {
+ cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+};
info attributes:
----------------
- st,mem-name : name for DDR configuration, simple string for information
-- st,mem-speed : DDR expected speed for the setting in MHz
+- st,mem-speed : DDR expected speed for the setting in kHz
- st,mem-size : DDR mem size in byte
phyc attributes:
----------------
- st,phy-reg : phy values depending of the DDR type (DDR3/LPDDR2/LPDDR3)
- for STM32MP15x: 10 values are requested in this order
+ for STM32MP15x: 11 values are requested in this order
PGCR
ACIOCR
DXCCR
"ddrphycapb";
st,mem-name = "DDR3 2x4Gb 533MHz";
- st,mem-speed = <533>;
+ st,mem-speed = <533000>;
st,mem-size = <0x40000000>;
st,ctl-reg = <
--- /dev/null
+Freescale ColdFire UART
+
+Required properties:
+- compatible : should be "fsl,mcf-uart"
+- reg: start address and size of the registers
+
+Example:
+
+soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+};
--- /dev/null
+Freescale ColdFire DSPI controller
+
+Required properties:
+- compatible : "fsl,mcf-dspi"
+- #address-cells: <1>, as required by generic SPI binding
+- #size-cells: <0>, also as required by generic SPI binding
+- reg : offset and length of the register set for the device
+
+Optional properties:
+- spi-max-frequency : max supported spi frequency
+- num-cs : the number of the chipselect signals
+- spi-mode: spi motorola mode, 0 to 3
+- ctar-params: CTAR0 to 7 register configuration, as an array
+ of 8 integer fields for each register, where each register
+ is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>.
+
+Example:
+
+dspi0: dspi@fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ ctar-fields = <7, 0, 0, 0, 0, 0, 1, 6>,
+ <7, 0, 0, 0, 0, 0, 1, 6>,
+ <7, 0, 0, 0, 0, 0, 1, 6>;
+};
Enable this driver to support Sata devices through
Synopsys DWC AHCI module.
+config FSL_AHCI
+ bool "Enable Freescale AHCI driver support"
+ select SCSI_AHCI
+ depends on AHCI
+ depends on DM_SCSI
+ help
+ Enable this driver to support Sata devices found in
+ some Freescale PowerPC SoCs.
+
+
config DWC_AHSATA
bool "Enable DWC AHSATA driver support"
select LIBATA
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
+obj-$(CONFIG_FSL_AHCI) += fsl_ahci.o
obj-$(CONFIG_AHCI) += ahci-uclass.o
obj-$(CONFIG_AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP PPC SATA platform driver
+ *
+ * (C) Copyright 2019 NXP, Inc.
+ *
+ */
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <dm/lists.h>
+#include <dm.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <libata.h>
+#include <sata.h>
+#include <malloc.h>
+#include <memalign.h>
+#include <fis.h>
+
+#include "fsl_sata.h"
+
+struct fsl_ahci_priv {
+ u32 base;
+ u32 flag;
+ u32 number;
+ fsl_sata_t *fsl_sata;
+};
+
+static int fsl_ahci_bind(struct udevice *dev)
+{
+ return device_bind_driver(dev, "fsl_ahci_scsi", "fsl_ahci_scsi", NULL);
+}
+
+static int fsl_ahci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct fsl_ahci_priv *priv = dev_get_priv(dev);
+
+ priv->number = dev_read_u32_default(dev, "sata-number", -1);
+ priv->flag = dev_read_u32_default(dev, "sata-fpdma", -1);
+
+ priv->base = dev_read_addr(dev);
+ if (priv->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ata_wait_register(unsigned __iomem *addr, u32 mask,
+ u32 val, u32 timeout_msec)
+{
+ int i;
+
+ for (i = 0; ((in_le32(addr) & mask) != val) && i < timeout_msec; i++)
+ mdelay(1);
+
+ return (i < timeout_msec) ? 0 : -1;
+}
+
+static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
+{
+ printf("Status FIS dump:\n\r");
+ printf("fis_type: %02x\n\r", s->fis_type);
+ printf("pm_port_i: %02x\n\r", s->pm_port_i);
+ printf("status: %02x\n\r", s->status);
+ printf("error: %02x\n\r", s->error);
+ printf("lba_low: %02x\n\r", s->lba_low);
+ printf("lba_mid: %02x\n\r", s->lba_mid);
+ printf("lba_high: %02x\n\r", s->lba_high);
+ printf("device: %02x\n\r", s->device);
+ printf("lba_low_exp: %02x\n\r", s->lba_low_exp);
+ printf("lba_mid_exp: %02x\n\r", s->lba_mid_exp);
+ printf("lba_high_exp: %02x\n\r", s->lba_high_exp);
+ printf("res1: %02x\n\r", s->res1);
+ printf("sector_count: %02x\n\r", s->sector_count);
+ printf("sector_count_exp: %02x\n\r", s->sector_count_exp);
+}
+
+static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
+{
+ printf("\n\rSATA: %08x\n\r", (u32)reg);
+ printf("CQR: %08x\n\r", in_le32(®->cqr));
+ printf("CAR: %08x\n\r", in_le32(®->car));
+ printf("CCR: %08x\n\r", in_le32(®->ccr));
+ printf("CER: %08x\n\r", in_le32(®->cer));
+ printf("CQR: %08x\n\r", in_le32(®->cqr));
+ printf("DER: %08x\n\r", in_le32(®->der));
+ printf("CHBA: %08x\n\r", in_le32(®->chba));
+ printf("HStatus: %08x\n\r", in_le32(®->hstatus));
+ printf("HControl: %08x\n\r", in_le32(®->hcontrol));
+ printf("CQPMP: %08x\n\r", in_le32(®->cqpmp));
+ printf("SIG: %08x\n\r", in_le32(®->sig));
+ printf("ICC: %08x\n\r", in_le32(®->icc));
+ printf("SStatus: %08x\n\r", in_le32(®->sstatus));
+ printf("SError: %08x\n\r", in_le32(®->serror));
+ printf("SControl: %08x\n\r", in_le32(®->scontrol));
+ printf("SNotification: %08x\n\r", in_le32(®->snotification));
+ printf("TransCfg: %08x\n\r", in_le32(®->transcfg));
+ printf("TransStatus: %08x\n\r", in_le32(®->transstatus));
+ printf("LinkCfg: %08x\n\r", in_le32(®->linkcfg));
+ printf("LinkCfg1: %08x\n\r", in_le32(®->linkcfg1));
+ printf("LinkCfg2: %08x\n\r", in_le32(®->linkcfg2));
+ printf("LinkStatus: %08x\n\r", in_le32(®->linkstatus));
+ printf("LinkStatus1: %08x\n\r", in_le32(®->linkstatus1));
+ printf("PhyCtrlCfg: %08x\n\r", in_le32(®->phyctrlcfg));
+ printf("SYSPR: %08x\n\r", in_be32(®->syspr));
+}
+
+static int init_sata(struct fsl_ahci_priv *priv)
+{
+ int i;
+ u32 cda;
+ u32 val32;
+ u32 sig;
+ fsl_sata_t *sata;
+ u32 length, align;
+ cmd_hdr_tbl_t *cmd_hdr;
+ fsl_sata_reg_t __iomem *reg;
+
+ int dev = priv->number;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ printf("the sata index %d is out of ranges\n\r", dev);
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_MPC85xx
+ if (dev == 0 && (!is_serdes_configured(SATA1))) {
+ printf("SATA%d [dev = %d] is not enabled\n", dev + 1, dev);
+ return -EINVAL;
+ }
+ if (dev == 1 && (!is_serdes_configured(SATA2))) {
+ printf("SATA%d [dev = %d] is not enabled\n", dev + 1, dev);
+ return -EINVAL;
+ }
+#endif
+
+ /* Allocate SATA device driver struct */
+ sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
+ if (!sata) {
+ printf("alloc the sata device struct failed\n\r");
+ return -ENOMEM;
+ }
+ /* Zero all of the device driver struct */
+ memset((void *)sata, 0, sizeof(fsl_sata_t));
+
+ sata->dma_flag = priv->flag;
+ snprintf(sata->name, 12, "SATA%d", dev);
+
+ /* Set the controller register base address to device struct */
+ reg = (fsl_sata_reg_t *)priv->base;
+ sata->reg_base = reg;
+
+ /* Allocate the command header table, 4 bytes aligned */
+ length = sizeof(struct cmd_hdr_tbl);
+ align = SATA_HC_CMD_HDR_TBL_ALIGN;
+ sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
+ if (!sata->cmd_hdr_tbl_offset) {
+ printf("alloc the command header failed\n\r");
+ return -ENOMEM;
+ }
+
+ cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
+ & ~(align - 1));
+ sata->cmd_hdr = cmd_hdr;
+
+ /* Zero all of the command header table */
+ memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
+
+ /* Allocate command descriptor for all command */
+ length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
+ align = SATA_HC_CMD_DESC_ALIGN;
+ sata->cmd_desc_offset = (void *)malloc(length + align);
+ if (!sata->cmd_desc_offset) {
+ printf("alloc the command descriptor failed\n\r");
+ return -ENOMEM;
+ }
+ sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
+ & ~(align - 1));
+ /* Zero all of command descriptor */
+ memset((void *)sata->cmd_desc_offset, 0, length + align);
+
+ /* Link the command descriptor to command header */
+ for (i = 0; i < SATA_HC_MAX_CMD; i++) {
+ cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
+ & ~(CMD_HDR_CDA_ALIGN - 1);
+ cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
+ }
+
+ /* To have safe state, force the controller offline */
+ val32 = in_le32(®->hcontrol);
+ val32 &= ~HCONTROL_ONOFF;
+ val32 |= HCONTROL_FORCE_OFFLINE;
+ out_le32(®->hcontrol, val32);
+
+ /* Wait the controller offline */
+ ata_wait_register(®->hstatus, HSTATUS_ONOFF, 0, 1000);
+
+ /* Set the command header base address to CHBA register to tell DMA */
+ out_le32(®->chba, (u32)cmd_hdr & ~0x3);
+
+ /* Snoop for the command header */
+ val32 = in_le32(®->hcontrol);
+ val32 |= HCONTROL_HDR_SNOOP;
+ out_le32(®->hcontrol, val32);
+
+ /* Disable all of interrupts */
+ val32 = in_le32(®->hcontrol);
+ val32 &= ~HCONTROL_INT_EN_ALL;
+ out_le32(®->hcontrol, val32);
+
+ /* Clear all of interrupts */
+ val32 = in_le32(®->hstatus);
+ out_le32(®->hstatus, val32);
+
+ /* Set the ICC, no interrupt coalescing */
+ out_le32(®->icc, 0x01000000);
+
+ /* No PM attatched, the SATA device direct connect */
+ out_le32(®->cqpmp, 0);
+
+ /* Clear SError register */
+ val32 = in_le32(®->serror);
+ out_le32(®->serror, val32);
+
+ /* Clear CER register */
+ val32 = in_le32(®->cer);
+ out_le32(®->cer, val32);
+
+ /* Clear DER register */
+ val32 = in_le32(®->der);
+ out_le32(®->der, val32);
+
+ /* No device detection or initialization action requested */
+ out_le32(®->scontrol, 0x00000300);
+
+ /* Configure the transport layer, default value */
+ out_le32(®->transcfg, 0x08000016);
+
+ /* Configure the link layer, default value */
+ out_le32(®->linkcfg, 0x0000ff34);
+
+ /* Bring the controller online */
+ val32 = in_le32(®->hcontrol);
+ val32 |= HCONTROL_ONOFF;
+ out_le32(®->hcontrol, val32);
+
+ mdelay(100);
+
+ /* print sata device name */
+ printf("%s ", sata->name);
+
+ /* Wait PHY RDY signal changed for 500ms */
+ ata_wait_register(®->hstatus, HSTATUS_PHY_RDY,
+ HSTATUS_PHY_RDY, 500);
+
+ /* Check PHYRDY */
+ val32 = in_le32(®->hstatus);
+ if (val32 & HSTATUS_PHY_RDY) {
+ sata->link = 1;
+ } else {
+ sata->link = 0;
+ printf("(No RDY)\n\r");
+ return -EINVAL;
+ }
+
+ /* Wait for signature updated, which is 1st D2H */
+ ata_wait_register(®->hstatus, HSTATUS_SIGNATURE,
+ HSTATUS_SIGNATURE, 10000);
+
+ if (val32 & HSTATUS_SIGNATURE) {
+ sig = in_le32(®->sig);
+ debug("Signature updated, the sig =%08x\n\r", sig);
+ sata->ata_device_type = ata_dev_classify(sig);
+ }
+
+ /* Check the speed */
+ val32 = in_le32(®->sstatus);
+ if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
+ printf("(1.5 Gbps)\n\r");
+ else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
+ printf("(3 Gbps)\n\r");
+
+ priv->fsl_sata = sata;
+
+ return 0;
+}
+
+static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata,
+ struct sata_fis_h2d *cfis,
+ int is_ncq, int tag,
+ u8 *buffer, u32 len)
+{
+ cmd_hdr_entry_t *cmd_hdr;
+ cmd_desc_t *cmd_desc;
+ sata_fis_h2d_t *h2d;
+ prd_entry_t *prde;
+ u32 ext_c_ddc;
+ u32 prde_count;
+ u32 val32;
+ u32 ttl;
+ u32 der;
+ int i;
+
+ fsl_sata_reg_t *reg = sata->reg_base;
+
+ /* Check xfer length */
+ if (len > SATA_HC_MAX_XFER_LEN) {
+ printf("max transfer length is 64MB\n\r");
+ return 0;
+ }
+
+ /* Setup the command descriptor */
+ cmd_desc = sata->cmd_desc + tag;
+
+ /* Get the pointer cfis of command descriptor */
+ h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
+
+ /* Zero the cfis of command descriptor */
+ memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
+
+ /* Copy the cfis from user to command descriptor */
+ h2d->fis_type = cfis->fis_type;
+ h2d->pm_port_c = cfis->pm_port_c;
+ h2d->command = cfis->command;
+
+ h2d->features = cfis->features;
+ h2d->features_exp = cfis->features_exp;
+
+ h2d->lba_low = cfis->lba_low;
+ h2d->lba_mid = cfis->lba_mid;
+ h2d->lba_high = cfis->lba_high;
+ h2d->lba_low_exp = cfis->lba_low_exp;
+ h2d->lba_mid_exp = cfis->lba_mid_exp;
+ h2d->lba_high_exp = cfis->lba_high_exp;
+
+ if (!is_ncq) {
+ h2d->sector_count = cfis->sector_count;
+ h2d->sector_count_exp = cfis->sector_count_exp;
+ } else { /* NCQ */
+ h2d->sector_count = (u8)(tag << 3);
+ }
+
+ h2d->device = cfis->device;
+ h2d->control = cfis->control;
+
+ /* Setup the PRD table */
+ prde = (prd_entry_t *)cmd_desc->prdt;
+ memset((void *)prde, 0, sizeof(struct prdt));
+
+ prde_count = 0;
+ ttl = len;
+ for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
+ if (!len)
+ break;
+ prde->dba = cpu_to_le32((u32)buffer & ~0x3);
+ debug("dba = %08x\n\r", (u32)buffer);
+
+ if (len < PRD_ENTRY_MAX_XFER_SZ) {
+ ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
+ debug("ext_c_ddc1 = %08x, len = %08x\n\r",
+ ext_c_ddc, len);
+ prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
+ prde_count++;
+ prde++;
+ } else {
+ ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
+ debug("ext_c_ddc2 = %08x, len = %08x\n\r",
+ ext_c_ddc, len);
+ prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
+ buffer += PRD_ENTRY_MAX_XFER_SZ;
+ len -= PRD_ENTRY_MAX_XFER_SZ;
+ prde_count++;
+ prde++;
+ }
+ }
+
+ /* Setup the command slot of cmd hdr */
+ cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
+
+ cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
+
+ val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
+ val32 |= sizeof(sata_fis_h2d_t);
+ cmd_hdr->prde_fis_len = cpu_to_le32(val32);
+
+ cmd_hdr->ttl = cpu_to_le32(ttl);
+
+ if (!is_ncq)
+ val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
+ else
+ val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP |
+ CMD_HDR_ATTR_FPDMA;
+
+ tag &= CMD_HDR_ATTR_TAG;
+ val32 |= tag;
+
+ debug("attribute = %08x\n\r", val32);
+ cmd_hdr->attribute = cpu_to_le32(val32);
+
+ /* Make sure cmd desc and cmd slot valid before command issue */
+ sync();
+
+ /* PMP*/
+ val32 = (u32)(h2d->pm_port_c & 0x0f);
+ out_le32(®->cqpmp, val32);
+
+ /* Wait no active */
+ if (ata_wait_register(®->car, (1 << tag), 0, 10000))
+ printf("Wait no active time out\n\r");
+
+ /* Issue command */
+ if (!(in_le32(®->cqr) & (1 << tag))) {
+ val32 = 1 << tag;
+ out_le32(®->cqr, val32);
+ }
+
+ /* Wait command completed for 10s */
+ if (ata_wait_register(®->ccr, (1 << tag), (1 << tag), 10000)) {
+ if (!is_ncq)
+ printf("Non-NCQ command time out\n\r");
+ else
+ printf("NCQ command time out\n\r");
+ }
+
+ val32 = in_le32(®->cer);
+
+ if (val32) {
+ fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
+ printf("CE at device\n\r");
+ fsl_sata_dump_regs(reg);
+ der = in_le32(®->der);
+ out_le32(®->cer, val32);
+ out_le32(®->der, der);
+ }
+
+ /* Clear complete flags */
+ val32 = in_le32(®->ccr);
+ out_le32(®->ccr, val32);
+
+ return len;
+}
+
+static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
+ enum cmd_type command_type, int tag, u8 *buffer,
+ u32 len)
+{
+ int rc;
+
+ if (tag > SATA_HC_MAX_CMD || tag < 0) {
+ printf("tag is out of range, tag=%d\n\r", tag);
+ return -1;
+ }
+
+ switch (command_type) {
+ case CMD_ATA:
+ rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
+ return rc;
+ case CMD_NCQ:
+ rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
+ return rc;
+ case CMD_ATAPI:
+ case CMD_VENDOR_BIST:
+ case CMD_BIST:
+ printf("not support now\n\r");
+ return -1;
+ default:
+ break;
+ }
+
+ return -1;
+}
+
+static void fsl_sata_identify(fsl_sata_t *sata, u16 *id)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_ID_ATA;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+}
+
+static void fsl_sata_xfer_mode(fsl_sata_t *sata, u16 *id)
+{
+ sata->pio = id[ATA_ID_PIO_MODES];
+ sata->mwdma = id[ATA_ID_MWDMA_MODES];
+ sata->udma = id[ATA_ID_UDMA_MODES];
+ debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio,
+ sata->mwdma, sata->udma);
+}
+
+static void fsl_sata_init_wcache(fsl_sata_t *sata, u16 *id)
+{
+ if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+ sata->wcache = 1;
+ if (ata_id_has_flush(id))
+ sata->flush = 1;
+ if (ata_id_has_flush_ext(id))
+ sata->flush_ext = 1;
+}
+
+static void fsl_sata_set_features(fsl_sata_t *sata)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ u8 udma_cap;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_SET_FEATURES;
+ cfis->features = SETFEATURES_XFER;
+
+ /* First check the device capablity */
+ udma_cap = (u8)(sata->udma & 0xff);
+ debug("udma_cap %02x\n\r", udma_cap);
+
+ if (udma_cap == ATA_UDMA6)
+ cfis->sector_count = XFER_UDMA_6;
+ if (udma_cap == ATA_UDMA5)
+ cfis->sector_count = XFER_UDMA_5;
+ if (udma_cap == ATA_UDMA4)
+ cfis->sector_count = XFER_UDMA_4;
+ if (udma_cap == ATA_UDMA3)
+ cfis->sector_count = XFER_UDMA_3;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 fsl_sata_rw_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ u32 block;
+
+ block = start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
+ cfis->device = ATA_LBA;
+
+ cfis->device |= (block >> 24) & 0xf;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+ cfis->sector_count = (u8)(blkcnt & 0xff);
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer,
+ ATA_SECT_SIZE * blkcnt);
+ return blkcnt;
+}
+
+static void fsl_sata_flush_cache(fsl_sata_t *sata)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_FLUSH;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 fsl_sata_rw_cmd_ext(fsl_sata_t *sata, u32 start,
+ u32 blkcnt, u8 *buffer, int is_write)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ u64 block;
+
+ block = (u64)start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+
+ cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
+ : ATA_CMD_READ_EXT;
+
+ cfis->lba_high_exp = (block >> 40) & 0xff;
+ cfis->lba_mid_exp = (block >> 32) & 0xff;
+ cfis->lba_low_exp = (block >> 24) & 0xff;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+ cfis->device = ATA_LBA;
+ cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
+ cfis->sector_count = blkcnt & 0xff;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer,
+ ATA_SECT_SIZE * blkcnt);
+ return blkcnt;
+}
+
+static u32 fsl_sata_rw_ncq_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt,
+ u8 *buffer,
+ int is_write)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ int ncq_channel;
+ u64 block;
+
+ if (sata->lba48 != 1) {
+ printf("execute FPDMA command on non-LBA48 hard disk\n\r");
+ return -1;
+ }
+
+ block = (u64)start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+
+ cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
+ : ATA_CMD_FPDMA_READ;
+
+ cfis->lba_high_exp = (block >> 40) & 0xff;
+ cfis->lba_mid_exp = (block >> 32) & 0xff;
+ cfis->lba_low_exp = (block >> 24) & 0xff;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+
+ cfis->device = ATA_LBA;
+ cfis->features_exp = (blkcnt >> 8) & 0xff;
+ cfis->features = blkcnt & 0xff;
+
+ if (sata->queue_depth >= SATA_HC_MAX_CMD)
+ ncq_channel = SATA_HC_MAX_CMD - 1;
+ else
+ ncq_channel = sata->queue_depth - 1;
+
+ /* Use the latest queue */
+ fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer,
+ ATA_SECT_SIZE * blkcnt);
+ return blkcnt;
+}
+
+static void fsl_sata_flush_cache_ext(fsl_sata_t *sata)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_FLUSH_EXT;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 ata_low_level_rw_lba48(fsl_sata_t *sata, u32 blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
+{
+ u32 start, blks;
+ u8 *addr;
+ int max_blks;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS_LBA48;
+ do {
+ if (blks > max_blks) {
+ if (sata->dma_flag != FLAGS_FPDMA)
+ fsl_sata_rw_cmd_ext(sata, start, max_blks,
+ addr, is_write);
+ else
+ fsl_sata_rw_ncq_cmd(sata, start, max_blks,
+ addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ if (sata->dma_flag != FLAGS_FPDMA)
+ fsl_sata_rw_cmd_ext(sata, start, blks,
+ addr, is_write);
+ else
+ fsl_sata_rw_ncq_cmd(sata, start, blks,
+ addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blks;
+}
+
+static u32 ata_low_level_rw_lba28(fsl_sata_t *sata, u32 blknr, u32 blkcnt,
+ const void *buffer, int is_write)
+{
+ u32 start, blks;
+ u8 *addr;
+ int max_blks;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS;
+ do {
+ if (blks > max_blks) {
+ fsl_sata_rw_cmd(sata, start, max_blks, addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ fsl_sata_rw_cmd(sata, start, blks, addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blks;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+static int sata_read(fsl_sata_t *sata, ulong blknr, lbaint_t blkcnt,
+ void *buffer)
+{
+ u32 rc;
+
+ if (sata->lba48)
+ rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
+ READ_CMD);
+ else
+ rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
+ READ_CMD);
+ return rc;
+}
+
+static int sata_write(fsl_sata_t *sata, ulong blknr, lbaint_t blkcnt,
+ const void *buffer)
+{
+ u32 rc;
+
+ if (sata->lba48) {
+ rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
+ WRITE_CMD);
+ if (sata->wcache && sata->flush_ext)
+ fsl_sata_flush_cache_ext(sata);
+ } else {
+ rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
+ WRITE_CMD);
+ if (sata->wcache && sata->flush)
+ fsl_sata_flush_cache(sata);
+ }
+
+ return rc;
+}
+
+int sata_getinfo(fsl_sata_t *sata, u16 *id)
+{
+ /* if no detected link */
+ if (!sata->link)
+ return -EINVAL;
+
+#ifdef CONFIG_LBA48
+ /* Check if support LBA48 */
+ if (ata_id_has_lba48(id)) {
+ sata->lba48 = 1;
+ debug("Device support LBA48\n\r");
+ } else {
+ debug("Device supports LBA28\n\r");
+ }
+#endif
+
+ /* Get the NCQ queue depth from device */
+ sata->queue_depth = ata_id_queue_depth(id);
+
+ /* Get the xfer mode from device */
+ fsl_sata_xfer_mode(sata, id);
+
+ /* Get the write cache status from device */
+ fsl_sata_init_wcache(sata, id);
+
+ /* Set the xfer mode to highest speed */
+ fsl_sata_set_features(sata);
+
+ return 0;
+}
+
+static int fsl_scsi_exec(fsl_sata_t *sata, struct scsi_cmd *pccb,
+ bool is_write)
+{
+ int ret;
+ u32 temp;
+ u16 blocks = 0;
+ lbaint_t start = 0;
+ u8 *buffer = pccb->pdata;
+
+ /* Retrieve the base LBA number from the ccb structure. */
+ if (pccb->cmd[0] == SCSI_READ16) {
+ memcpy(&start, pccb->cmd + 2, 8);
+ start = be64_to_cpu(start);
+ } else {
+ memcpy(&temp, pccb->cmd + 2, 4);
+ start = be32_to_cpu(temp);
+ }
+
+ if (pccb->cmd[0] == SCSI_READ16)
+ blocks = (((u16)pccb->cmd[13]) << 8) | ((u16)pccb->cmd[14]);
+ else
+ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16)pccb->cmd[8]);
+
+ debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
+ is_write ? "write" : "read", blocks, start);
+
+ if (is_write)
+ ret = sata_write(sata, start, blocks, buffer);
+ else
+ ret = sata_read(sata, start, blocks, buffer);
+
+ return ret;
+}
+
+static char *fsl_ata_id_strcpy(u16 *target, u16 *src, int len)
+{
+ int i;
+
+ for (i = 0; i < len / 2; i++)
+ target[i] = src[i];
+
+ return (char *)target;
+}
+
+static int fsl_ata_scsiop_inquiry(struct ahci_uc_priv *uc_priv,
+ struct scsi_cmd *pccb,
+ fsl_sata_t *sata)
+{
+ u8 port;
+ u16 *idbuf;
+
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
+
+ /* Clean ccb data buffer */
+ memset(pccb->pdata, 0, pccb->datalen);
+
+ if (pccb->datalen <= 35)
+ return 0;
+
+ /* Read id from sata */
+ port = pccb->target;
+
+ fsl_sata_identify(sata, (u16 *)tmpid);
+
+ if (!uc_priv->ataid[port]) {
+ uc_priv->ataid[port] = malloc(ATA_ID_WORDS * 2);
+ if (!uc_priv->ataid[port]) {
+ printf("%s: No memory for ataid[port]\n", __func__);
+ return -ENOMEM;
+ }
+ }
+
+ idbuf = uc_priv->ataid[port];
+
+ memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
+
+ memcpy(&pccb->pdata[8], "ATA ", 8);
+ fsl_ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
+ fsl_ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
+
+ sata_getinfo(sata, (u16 *)idbuf);
+#ifdef DEBUG
+ ata_dump_id(idbuf);
+#endif
+ return 0;
+}
+
+/*
+ * SCSI READ CAPACITY10 command operation.
+ */
+static int fsl_ata_scsiop_read_capacity10(struct ahci_uc_priv *uc_priv,
+ struct scsi_cmd *pccb)
+{
+ u32 cap;
+ u64 cap64;
+ u32 block_size;
+
+ if (!uc_priv->ataid[pccb->target]) {
+ printf("scsi_ahci: SCSI READ CAPACITY10 command failure.");
+ printf("\tNo ATA info!\n");
+ printf("\tPlease run SCSI command INQUIRY first!\n");
+ return -EPERM;
+ }
+
+ cap64 = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
+ if (cap64 > 0x100000000ULL)
+ cap64 = 0xffffffff;
+
+ cap = cpu_to_be32(cap64);
+ memcpy(pccb->pdata, &cap, sizeof(cap));
+
+ block_size = cpu_to_be32((u32)512);
+ memcpy(&pccb->pdata[4], &block_size, 4);
+
+ return 0;
+}
+
+/*
+ * SCSI READ CAPACITY16 command operation.
+ */
+static int fsl_ata_scsiop_read_capacity16(struct ahci_uc_priv *uc_priv,
+ struct scsi_cmd *pccb)
+{
+ u64 cap;
+ u64 block_size;
+
+ if (!uc_priv->ataid[pccb->target]) {
+ printf("scsi_ahci: SCSI READ CAPACITY16 command failure.");
+ printf("\tNo ATA info!\n");
+ printf("\tPlease run SCSI command INQUIRY first!\n");
+ return -EPERM;
+ }
+
+ cap = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
+ cap = cpu_to_be64(cap);
+ memcpy(pccb->pdata, &cap, sizeof(cap));
+
+ block_size = cpu_to_be64((u64)512);
+ memcpy(&pccb->pdata[8], &block_size, 8);
+
+ return 0;
+}
+
+/*
+ * SCSI TEST UNIT READY command operation.
+ */
+static int fsl_ata_scsiop_test_unit_ready(struct ahci_uc_priv *uc_priv,
+ struct scsi_cmd *pccb)
+{
+ return (uc_priv->ataid[pccb->target]) ? 0 : -EPERM;
+}
+
+static int fsl_ahci_scsi_exec(struct udevice *dev, struct scsi_cmd *pccb)
+{
+ struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev->parent);
+ struct fsl_ahci_priv *priv = dev_get_priv(dev->parent);
+ fsl_sata_t *sata = priv->fsl_sata;
+ int ret;
+
+ switch (pccb->cmd[0]) {
+ case SCSI_READ16:
+ case SCSI_READ10:
+ ret = fsl_scsi_exec(sata, pccb, 0);
+ break;
+ case SCSI_WRITE10:
+ ret = fsl_scsi_exec(sata, pccb, 1);
+ break;
+ case SCSI_RD_CAPAC10:
+ ret = fsl_ata_scsiop_read_capacity10(uc_priv, pccb);
+ break;
+ case SCSI_RD_CAPAC16:
+ ret = fsl_ata_scsiop_read_capacity16(uc_priv, pccb);
+ break;
+ case SCSI_TST_U_RDY:
+ ret = fsl_ata_scsiop_test_unit_ready(uc_priv, pccb);
+ break;
+ case SCSI_INQUIRY:
+ ret = fsl_ata_scsiop_inquiry(uc_priv, pccb, sata);
+ break;
+ default:
+ printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
+ return -ENOTSUPP;
+ }
+
+ if (ret) {
+ debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int fsl_ahci_probe(struct udevice *dev)
+{
+ struct fsl_ahci_priv *priv = dev_get_priv(dev);
+ struct udevice *child_dev;
+ struct scsi_platdata *uc_plat;
+
+ device_find_first_child(dev, &child_dev);
+ if (!child_dev)
+ return -ENODEV;
+ uc_plat = dev_get_uclass_platdata(child_dev);
+ uc_plat->base = priv->base;
+ uc_plat->max_lun = 1;
+ uc_plat->max_id = 1;
+
+ return init_sata(priv);
+}
+
+struct scsi_ops fsl_scsi_ops = {
+ .exec = fsl_ahci_scsi_exec,
+};
+
+static const struct udevice_id fsl_ahci_ids[] = {
+ { .compatible = "fsl,pq-sata-v2" },
+ { }
+};
+
+U_BOOT_DRIVER(fsl_ahci_scsi) = {
+ .name = "fsl_ahci_scsi",
+ .id = UCLASS_SCSI,
+ .ops = &fsl_scsi_ops,
+};
+
+U_BOOT_DRIVER(fsl_ahci) = {
+ .name = "fsl_ahci",
+ .id = UCLASS_AHCI,
+ .of_match = fsl_ahci_ids,
+ .bind = fsl_ahci_bind,
+ .ofdata_to_platdata = fsl_ahci_ofdata_to_platdata,
+ .probe = fsl_ahci_probe,
+ .priv_auto_alloc_size = sizeof(struct fsl_ahci_priv),
+};
int wcache;
int flush;
int flush_ext;
+ u32 dma_flag;
} fsl_sata_t;
#define READ_CMD 0
setbits_le32(priv->base + pll[pll_id].pllxcr, RCC_PLLNCR_SSCG_CTRL);
}
+static __maybe_unused int pll_set_rate(struct udevice *dev,
+ int pll_id,
+ int div_id,
+ unsigned long clk_rate)
+{
+ struct stm32mp1_clk_priv *priv = dev_get_priv(dev);
+ unsigned int pllcfg[PLLCFG_NB];
+ ofnode plloff;
+ char name[12];
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+ enum stm32mp1_plltype type = pll[pll_id].plltype;
+ int divm, divn, divy;
+ int ret;
+ ulong fck_ref;
+ u32 fracv;
+ u64 value;
+
+ if (div_id > _DIV_NB)
+ return -EINVAL;
+
+ sprintf(name, "st,pll@%d", pll_id);
+ plloff = dev_read_subnode(dev, name);
+ if (!ofnode_valid(plloff))
+ return -FDT_ERR_NOTFOUND;
+
+ ret = ofnode_read_u32_array(plloff, "cfg",
+ pllcfg, PLLCFG_NB);
+ if (ret < 0)
+ return -FDT_ERR_NOTFOUND;
+
+ fck_ref = pll_get_fref_ck(priv, pll_id);
+
+ divm = pllcfg[PLLCFG_M];
+ /* select output divider = 0: for _DIV_P, 1:_DIV_Q 2:_DIV_R */
+ divy = pllcfg[PLLCFG_P + div_id];
+
+ /* For: PLL1 & PLL2 => VCO is * 2 but ck_pll_y is also / 2
+ * So same final result than PLL2 et 4
+ * with FRACV
+ * Fck_pll_y = Fck_ref * ((DIVN + 1) + FRACV / 2^13)
+ * / (DIVy + 1) * (DIVM + 1)
+ * value = (DIVN + 1) * 2^13 + FRACV / 2^13
+ * = Fck_pll_y (DIVy + 1) * (DIVM + 1) * 2^13 / Fck_ref
+ */
+ value = ((u64)clk_rate * (divy + 1) * (divm + 1)) << 13;
+ value = lldiv(value, fck_ref);
+
+ divn = (value >> 13) - 1;
+ if (divn < DIVN_MIN ||
+ divn > stm32mp1_pll[type].divn_max) {
+ pr_err("divn invalid = %d", divn);
+ return -EINVAL;
+ }
+ fracv = value - ((divn + 1) << 13);
+ pllcfg[PLLCFG_N] = divn;
+
+ /* reconfigure PLL */
+ pll_stop(priv, pll_id);
+ pll_config(priv, pll_id, pllcfg, fracv);
+ pll_start(priv, pll_id);
+ pll_output(priv, pll_id, pllcfg[PLLCFG_O]);
+
+ return 0;
+}
+
static int set_clksrc(struct stm32mp1_clk_priv *priv, unsigned int clksrc)
{
u32 address = priv->base + (clksrc >> 4);
int p;
switch (clk->id) {
+#if defined(STM32MP1_CLOCK_TREE_INIT) && \
+ defined(CONFIG_STM32MP1_DDR_INTERACTIVE)
+ case DDRPHYC:
+ break;
+#endif
case LTDC_PX:
case DSI_PX:
break;
return -EINVAL;
switch (p) {
+#if defined(STM32MP1_CLOCK_TREE_INIT) && \
+ defined(CONFIG_STM32MP1_DDR_INTERACTIVE)
+ case _PLL2_R: /* DDRPHYC */
+ {
+ /* only for change DDR clock in interactive mode */
+ ulong result;
+
+ set_clksrc(priv, CLK_AXI_HSI);
+ result = pll_set_rate(clk->dev, _PLL2, _DIV_R, clk_rate);
+ set_clksrc(priv, CLK_AXI_PLL2P);
+ return result;
+ }
+#endif
case _PLL4_Q:
/* for LTDC_PX and DSI_PX case */
return pll_set_output_rate(clk->dev, _PLL4, _DIV_Q, clk_rate);
plat->name = ofnode_get_name(node);
}
- ret = device_bind(dev, dev->driver, plat->name,
- plat, -1, &subdev);
+ ret = device_bind_ofnode(dev, dev->driver, plat->name,
+ plat, node, &subdev);
if (ret)
return ret;
- dev->node = node;
bank++;
}
af_delay_max = setup->analog_filter ?
STM32_I2C_ANALOG_FILTER_DELAY_MAX : 0;
- sdadel_min = setup->fall_time - i2c_specs[setup->speed].hddat_min -
+ sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time -
af_delay_min - (setup->dnf + 3) * i2cclk;
sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -
p_prev = p;
list_add_tail(&v->node, solutions);
+ break;
}
}
+
+ if (p_prev == p)
+ break;
}
}
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2018 Cisco Systems, Inc.
+ * (C) Copyright 2019 Synamedia
*
* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
*/
#include <common.h>
+#include <dm.h>
#include <mach/sdhci.h>
#include <malloc.h>
#include <sdhci.h>
*/
#define BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY 400000
-static char *BCMSTB_SDHCI_NAME = "bcmstb-sdhci";
-
/*
* This driver has only been tested with eMMC devices; SD devices may
* not work.
*/
-int bcmstb_sdhci_init(phys_addr_t regbase)
+struct sdhci_bcmstb_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+static int sdhci_bcmstb_bind(struct udevice *dev)
{
- struct sdhci_host *host = NULL;
+ struct sdhci_bcmstb_plat *plat = dev_get_platdata(dev);
- host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
- if (!host) {
- printf("%s: Failed to allocate memory\n", __func__);
- return 1;
- }
- memset(host, 0, sizeof(*host));
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static int sdhci_bcmstb_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct sdhci_bcmstb_plat *plat = dev_get_platdata(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ fdt_addr_t base;
+ int ret;
- host->name = BCMSTB_SDHCI_NAME;
- host->ioaddr = (void *)regbase;
- host->quirks = 0;
+ base = devfdt_get_addr(dev);
+ if (base == FDT_ADDR_T_NONE)
+ return -EINVAL;
- host->cfg.part_type = PART_TYPE_DOS;
+ host->name = dev->name;
+ host->ioaddr = (void *)base;
- host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ ret = mmc_of_parse(dev, &plat->cfg);
+ if (ret)
+ return ret;
- return add_sdhci(host,
- BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY,
- BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY);
+ ret = sdhci_setup_cfg(&plat->cfg, host,
+ BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY,
+ BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY);
+ if (ret)
+ return ret;
+
+ upriv->mmc = &plat->mmc;
+ host->mmc = &plat->mmc;
+ host->mmc->priv = host;
+
+ return sdhci_probe(dev);
}
+
+static const struct udevice_id sdhci_bcmstb_match[] = {
+ { .compatible = "brcm,bcm7425-sdhci" },
+ { .compatible = "brcm,sdhci-brcmstb" },
+ { }
+};
+
+U_BOOT_DRIVER(sdhci_bcmstb) = {
+ .name = "sdhci-bcmstb",
+ .id = UCLASS_MMC,
+ .of_match = sdhci_bcmstb_match,
+ .ops = &sdhci_ops,
+ .bind = sdhci_bcmstb_bind,
+ .probe = sdhci_bcmstb_probe,
+ .priv_auto_alloc_size = sizeof(struct sdhci_host),
+ .platdata_auto_alloc_size = sizeof(struct sdhci_bcmstb_plat),
+};
#endif
#if CONFIG_IS_ENABLED(DM_MMC)
+#ifndef CONFIG_PPC
#include <asm/arch/clock.h>
+#endif
__weak void init_clk_usdhc(u32 index)
{
}
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
-
+#ifdef CONFIG_PPC
+ priv->esdhc_regs = (struct fsl_esdhc *)lower_32_bits(addr);
+#else
priv->esdhc_regs = (struct fsl_esdhc *)addr;
+#endif
priv->dev = dev;
priv->mode = -1;
if (data) {
priv->sdhc_clk = clk_get_rate(&priv->per_clk);
} else {
+#ifndef CONFIG_PPC
priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq);
+#else
+ priv->sdhc_clk = gd->arch.sdhc_clk;
+#endif
if (priv->sdhc_clk <= 0) {
dev_err(dev, "Unable to get clk for %s\n", dev->name);
return -EINVAL;
/* SCC registers */
#define RENESAS_SDHI_SCC_DTCNTL 0x800
-#define RENESAS_SDHI_SCC_DTCNTL_TAPEN BIT(0)
-#define RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16
-#define RENESAS_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff
+#define RENESAS_SDHI_SCC_DTCNTL_TAPEN BIT(0)
+#define RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16
+#define RENESAS_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff
#define RENESAS_SDHI_SCC_TAPSET 0x804
#define RENESAS_SDHI_SCC_DT2FF 0x808
#define RENESAS_SDHI_SCC_CKSEL 0x80c
-#define RENESAS_SDHI_SCC_CKSEL_DTSEL BIT(0)
-#define RENESAS_SDHI_SCC_RVSCNTL 0x810
-#define RENESAS_SDHI_SCC_RVSCNTL_RVSEN BIT(0)
+#define RENESAS_SDHI_SCC_CKSEL_DTSEL BIT(0)
+#define RENESAS_SDHI_SCC_RVSCNTL 0x810
+#define RENESAS_SDHI_SCC_RVSCNTL_RVSEN BIT(0)
#define RENESAS_SDHI_SCC_RVSREQ 0x814
-#define RENESAS_SDHI_SCC_RVSREQ_RVSERR BIT(2)
+#define RENESAS_SDHI_SCC_RVSREQ_RVSERR BIT(2)
#define RENESAS_SDHI_SCC_SMPCMP 0x818
-#define RENESAS_SDHI_SCC_TMPPORT2 0x81c
-#define RENESAS_SDHI_SCC_TMPPORT2_HS400EN BIT(31)
-#define RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL BIT(4)
+#define RENESAS_SDHI_SCC_TMPPORT2 0x81c
+#define RENESAS_SDHI_SCC_TMPPORT2_HS400EN BIT(31)
+#define RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL BIT(4)
+#define RENESAS_SDHI_SCC_TMPPORT3 0x828
+#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_0 3
+#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_1 2
+#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_2 1
+#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_3 0
+#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_MASK 0x3
+#define RENESAS_SDHI_SCC_TMPPORT4 0x82c
+#define RENESAS_SDHI_SCC_TMPPORT4_DLL_ACC_START BIT(0)
+#define RENESAS_SDHI_SCC_TMPPORT5 0x830
+#define RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_R BIT(8)
+#define RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_W (0 << 8)
+#define RENESAS_SDHI_SCC_TMPPORT5_DLL_ADR_MASK 0x3F
+#define RENESAS_SDHI_SCC_TMPPORT6 0x834
+#define RENESAS_SDHI_SCC_TMPPORT7 0x838
+#define RENESAS_SDHI_SCC_TMPPORT_DISABLE_WP_CODE 0xa5000000
+#define RENESAS_SDHI_SCC_TMPPORT_CALIB_CODE_MASK 0x1f
+#define RENESAS_SDHI_SCC_TMPPORT_MANUAL_MODE BIT(7)
#define RENESAS_SDHI_MAX_TAP 3
+static u32 sd_scc_tmpport_read32(struct tmio_sd_priv *priv, u32 addr)
+{
+ /* read mode */
+ tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_R |
+ (RENESAS_SDHI_SCC_TMPPORT5_DLL_ADR_MASK & addr),
+ RENESAS_SDHI_SCC_TMPPORT5);
+
+ /* access start and stop */
+ tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT4_DLL_ACC_START,
+ RENESAS_SDHI_SCC_TMPPORT4);
+ tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_TMPPORT4);
+
+ return tmio_sd_readl(priv, RENESAS_SDHI_SCC_TMPPORT7);
+}
+
+static void sd_scc_tmpport_write32(struct tmio_sd_priv *priv, u32 addr, u32 val)
+{
+ /* write mode */
+ tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_W |
+ (RENESAS_SDHI_SCC_TMPPORT5_DLL_ADR_MASK & addr),
+ RENESAS_SDHI_SCC_TMPPORT5);
+ tmio_sd_writel(priv, val, RENESAS_SDHI_SCC_TMPPORT6);
+
+ /* access start and stop */
+ tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT4_DLL_ACC_START,
+ RENESAS_SDHI_SCC_TMPPORT4);
+ tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_TMPPORT4);
+}
+
+static void renesas_sdhi_adjust_hs400_mode_enable(struct tmio_sd_priv *priv)
+{
+ u32 calib_code;
+
+ if (!priv->adjust_hs400_enable)
+ return;
+
+ if (!priv->needs_adjust_hs400)
+ return;
+
+ /*
+ * Enabled Manual adjust HS400 mode
+ *
+ * 1) Disabled Write Protect
+ * W(addr=0x00, WP_DISABLE_CODE)
+ * 2) Read Calibration code and adjust
+ * R(addr=0x26) - adjust value
+ * 3) Enabled Manual Calibration
+ * W(addr=0x22, manual mode | Calibration code)
+ * 4) Set Offset value to TMPPORT3 Reg
+ */
+ sd_scc_tmpport_write32(priv, 0x00,
+ RENESAS_SDHI_SCC_TMPPORT_DISABLE_WP_CODE);
+ calib_code = sd_scc_tmpport_read32(priv, 0x26);
+ calib_code &= RENESAS_SDHI_SCC_TMPPORT_CALIB_CODE_MASK;
+ if (calib_code > priv->adjust_hs400_calibrate)
+ calib_code -= priv->adjust_hs400_calibrate;
+ else
+ calib_code = 0;
+ sd_scc_tmpport_write32(priv, 0x22,
+ RENESAS_SDHI_SCC_TMPPORT_MANUAL_MODE |
+ calib_code);
+ tmio_sd_writel(priv, priv->adjust_hs400_offset,
+ RENESAS_SDHI_SCC_TMPPORT3);
+
+ /* Clear flag */
+ priv->needs_adjust_hs400 = false;
+}
+
+static void renesas_sdhi_adjust_hs400_mode_disable(struct tmio_sd_priv *priv)
+{
+
+ /* Disabled Manual adjust HS400 mode
+ *
+ * 1) Disabled Write Protect
+ * W(addr=0x00, WP_DISABLE_CODE)
+ * 2) Disabled Manual Calibration
+ * W(addr=0x22, 0)
+ * 3) Clear offset value to TMPPORT3 Reg
+ */
+ sd_scc_tmpport_write32(priv, 0x00,
+ RENESAS_SDHI_SCC_TMPPORT_DISABLE_WP_CODE);
+ sd_scc_tmpport_write32(priv, 0x22, 0);
+ tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_TMPPORT3);
+}
+
static unsigned int renesas_sdhi_init_tuning(struct tmio_sd_priv *priv)
{
u32 reg;
RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL);
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_TMPPORT2);
+ /* Disable HS400 mode adjustment */
+ renesas_sdhi_adjust_hs400_mode_disable(priv);
+
reg = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
reg |= TMIO_SD_CLKCTL_SCLKEN;
tmio_sd_writel(priv, reg, TMIO_SD_CLKCTL);
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_TMPPORT2);
+ /* Disable HS400 mode adjustment */
+ if (!hs400)
+ renesas_sdhi_adjust_hs400_mode_disable(priv);
+
tmio_sd_writel(priv, (0x8 << RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) |
RENESAS_SDHI_SCC_DTCNTL_TAPEN,
RENESAS_SDHI_SCC_DTCNTL);
reg |= RENESAS_SDHI_SCC_RVSCNTL_RVSEN;
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_RVSCNTL);
+ /* Execute adjust hs400 offset after setting to HS400 mode */
+ if (hs400)
+ priv->needs_adjust_hs400 = true;
+
return 0;
}
bool select = false;
u32 reg;
+ priv->needs_adjust_hs400 = false;
+
/* Clear SCC_RVSREQ */
tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_RVSREQ);
}
#endif
+static int renesas_sdhi_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ int ret;
+
+ ret = tmio_sd_send_cmd(dev, cmd, data);
+ if (ret)
+ return ret;
+
+#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
+ CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
+ CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
+ struct tmio_sd_priv *priv = dev_get_priv(dev);
+
+ if (cmd->cmdidx == MMC_CMD_SEND_STATUS)
+ renesas_sdhi_adjust_hs400_mode_enable(priv);
+#endif
+
+ return 0;
+}
+
static const struct dm_mmc_ops renesas_sdhi_ops = {
- .send_cmd = tmio_sd_send_cmd,
+ .send_cmd = renesas_sdhi_send_cmd,
.set_ios = renesas_sdhi_set_ios,
.get_cd = tmio_sd_get_cd,
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
if (!(priv->caps & TMIO_SD_CAP_RCAR_GEN3))
return;
- /* HS400 is not supported on H3 ES1.x and M3W ES1.0,ES1.1 */
+ /* HS400 is not supported on H3 ES1.x and M3W ES1.0,ES1.1,ES1.2 */
if (((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7795) &&
(rmobile_get_cpu_rev_integer() <= 1)) ||
((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
(rmobile_get_cpu_rev_integer() == 1) &&
- (rmobile_get_cpu_rev_fraction() <= 1)))
+ (rmobile_get_cpu_rev_fraction() <= 2)))
plat->cfg.host_caps &= ~MMC_MODE_HS400;
+ /* M3W ES1.x for x>2 can use HS400 with manual adjustment */
+ if ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
+ (rmobile_get_cpu_rev_integer() == 1) &&
+ (rmobile_get_cpu_rev_fraction() > 2)) {
+ priv->adjust_hs400_enable = true;
+ priv->adjust_hs400_offset = 0;
+ priv->adjust_hs400_calibrate = 0x9;
+ }
+
+ /* M3N can use HS400 with manual adjustment */
+ if (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77965) {
+ priv->adjust_hs400_enable = true;
+ priv->adjust_hs400_offset = 0;
+ priv->adjust_hs400_calibrate = 0x0;
+ }
+
+ /* E3 can use HS400 with manual adjustment */
+ if (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77990) {
+ priv->adjust_hs400_enable = true;
+ priv->adjust_hs400_offset = 0;
+ priv->adjust_hs400_calibrate = 0x2;
+ }
+
/* H3 ES2.0 uses 4 tuning taps */
if ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7795) &&
(rmobile_get_cpu_rev_integer() == 2))
#if CONFIG_IS_ENABLED(RENESAS_SDHI)
u8 tap_set;
u8 nrtaps;
+ bool needs_adjust_hs400;
+ bool adjust_hs400_enable;
+ u8 adjust_hs400_offset;
+ u8 adjust_hs400_calibrate;
#endif
ulong (*clk_get_rate)(struct tmio_sd_priv *);
};
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
+config FMAN_ENET
+ bool "Freescale FMan ethernet support"
+ depends on ARM || PPC
+ help
+ This driver support the Freescale FMan Ethernet controller
+
config FTMAC100
bool "Ftmac100 Ethernet Support"
help
printf("NAND read of FMAN firmware at offset 0x%x failed %d\n",
CONFIG_SYS_FMAN_FW_ADDR, rc);
}
-#elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH)
+#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH)
struct spi_flash *ucode_flash;
void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
int ret = 0;
Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
also used to access EHCI USB controller on the SoC.
+config PCI_RCAR_GEN3
+ bool "Renesas RCar Gen3 PCIe driver"
+ depends on DM_PCI
+ depends on RCAR_GEN3
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Renesas RCar Gen3 SoCs.
+
config PCI_SANDBOX
bool "Sandbox PCI support"
depends on SANDBOX && DM_PCI
obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
obj-$(CONFIG_PCI_MVEBU) += pci_mvebu.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+obj-$(CONFIG_PCI_RCAR_GEN3) += pci-rcar-gen3.o
obj-$(CONFIG_SH4_PCI) += pci_sh4.o
obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RCar Gen3 PCIEC driver
+ *
+ * Copyright (C) 2018-2019 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on Linux PCIe driver for Renesas R-Car SoCs
+ * Copyright (C) 2014 Renesas Electronics Europe Ltd
+ *
+ * Based on:
+ * arch/sh/drivers/pci/pcie-sh7786.c
+ * arch/sh/drivers/pci/ops-sh7786.c
+ * Copyright (C) 2009 - 2011 Paul Mundt
+ *
+ * Author: Phil Edworthy <phil.edworthy@renesas.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <pci.h>
+#include <wait_bit.h>
+
+#define PCIECAR 0x000010
+#define PCIECCTLR 0x000018
+#define CONFIG_SEND_ENABLE BIT(31)
+#define TYPE0 (0 << 8)
+#define TYPE1 BIT(8)
+#define PCIECDR 0x000020
+#define PCIEMSR 0x000028
+#define PCIEINTXR 0x000400
+#define PCIEPHYSR 0x0007f0
+#define PHYRDY BIT(0)
+#define PCIEMSITXR 0x000840
+
+/* Transfer control */
+#define PCIETCTLR 0x02000
+#define CFINIT 1
+#define PCIETSTR 0x02004
+#define DATA_LINK_ACTIVE 1
+#define PCIEERRFR 0x02020
+#define UNSUPPORTED_REQUEST BIT(4)
+#define PCIEMSIFR 0x02044
+#define PCIEMSIALR 0x02048
+#define MSIFE 1
+#define PCIEMSIAUR 0x0204c
+#define PCIEMSIIER 0x02050
+
+/* root port address */
+#define PCIEPRAR(x) (0x02080 + ((x) * 0x4))
+
+/* local address reg & mask */
+#define PCIELAR(x) (0x02200 + ((x) * 0x20))
+#define PCIELAMR(x) (0x02208 + ((x) * 0x20))
+#define LAM_PREFETCH BIT(3)
+#define LAM_64BIT BIT(2)
+#define LAR_ENABLE BIT(1)
+
+/* PCIe address reg & mask */
+#define PCIEPALR(x) (0x03400 + ((x) * 0x20))
+#define PCIEPAUR(x) (0x03404 + ((x) * 0x20))
+#define PCIEPAMR(x) (0x03408 + ((x) * 0x20))
+#define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20))
+#define PAR_ENABLE BIT(31)
+#define IO_SPACE BIT(8)
+
+/* Configuration */
+#define PCICONF(x) (0x010000 + ((x) * 0x4))
+#define PMCAP(x) (0x010040 + ((x) * 0x4))
+#define EXPCAP(x) (0x010070 + ((x) * 0x4))
+#define VCCAP(x) (0x010100 + ((x) * 0x4))
+
+/* link layer */
+#define IDSETR1 0x011004
+#define TLCTLR 0x011048
+#define MACSR 0x011054
+#define SPCHGFIN BIT(4)
+#define SPCHGFAIL BIT(6)
+#define SPCHGSUC BIT(7)
+#define LINK_SPEED (0xf << 16)
+#define LINK_SPEED_2_5GTS (1 << 16)
+#define LINK_SPEED_5_0GTS (2 << 16)
+#define MACCTLR 0x011058
+#define SPEED_CHANGE BIT(24)
+#define SCRAMBLE_DISABLE BIT(27)
+#define MACS2R 0x011078
+#define MACCGSPSETR 0x011084
+#define SPCNGRSN BIT(31)
+
+/* R-Car H1 PHY */
+#define H1_PCIEPHYADRR 0x04000c
+#define WRITE_CMD BIT(16)
+#define PHY_ACK BIT(24)
+#define RATE_POS 12
+#define LANE_POS 8
+#define ADR_POS 0
+#define H1_PCIEPHYDOUTR 0x040014
+
+/* R-Car Gen2 PHY */
+#define GEN2_PCIEPHYADDR 0x780
+#define GEN2_PCIEPHYDATA 0x784
+#define GEN2_PCIEPHYCTRL 0x78c
+
+#define INT_PCI_MSI_NR 32
+
+#define RCONF(x) (PCICONF(0) + (x))
+#define RPMCAP(x) (PMCAP(0) + (x))
+#define REXPCAP(x) (EXPCAP(0) + (x))
+#define RVCCAP(x) (VCCAP(0) + (x))
+
+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24)
+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19)
+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16)
+
+#define RCAR_PCI_MAX_RESOURCES 4
+#define MAX_NR_INBOUND_MAPS 6
+
+#define PCI_EXP_FLAGS 2 /* Capabilities register */
+#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */
+#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
+#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
+#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
+#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
+
+enum {
+ RCAR_PCI_ACCESS_READ,
+ RCAR_PCI_ACCESS_WRITE,
+};
+
+struct rcar_gen3_pcie_priv {
+ fdt_addr_t regs;
+};
+
+static void rcar_rmw32(struct udevice *dev, int where, u32 mask, u32 data)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+ int shift = 8 * (where & 3);
+
+ clrsetbits_le32(priv->regs + (where & ~3),
+ mask << shift, data << shift);
+}
+
+static u32 rcar_read_conf(struct udevice *dev, int where)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+ int shift = 8 * (where & 3);
+
+ return readl(priv->regs + (where & ~3)) >> shift;
+}
+
+static int rcar_pcie_config_access(struct udevice *udev,
+ unsigned char access_type,
+ pci_dev_t bdf, int where, ulong *data)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(udev);
+ u32 reg = where & ~3;
+
+ /* Clear errors */
+ clrbits_le32(priv->regs + PCIEERRFR, 0);
+
+ /* Set the PIO address */
+ writel((bdf << 8) | reg, priv->regs + PCIECAR);
+
+ /* Enable the configuration access */
+ if (!PCI_BUS(bdf))
+ writel(CONFIG_SEND_ENABLE | TYPE0, priv->regs + PCIECCTLR);
+ else
+ writel(CONFIG_SEND_ENABLE | TYPE1, priv->regs + PCIECCTLR);
+
+ /* Check for errors */
+ if (readl(priv->regs + PCIEERRFR) & UNSUPPORTED_REQUEST)
+ return -ENODEV;
+
+ /* Check for master and target aborts */
+ if (rcar_read_conf(udev, RCONF(PCI_STATUS)) &
+ (PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT))
+ return -ENODEV;
+
+ if (access_type == RCAR_PCI_ACCESS_READ)
+ *data = readl(priv->regs + PCIECDR);
+ else
+ writel(*data, priv->regs + PCIECDR);
+
+ /* Disable the configuration access */
+ writel(0, priv->regs + PCIECCTLR);
+
+ return 0;
+}
+
+static int rcar_gen3_pcie_addr_valid(pci_dev_t d, uint where)
+{
+ u32 slot;
+
+ if (PCI_FUNC(d))
+ return -EINVAL;
+
+ slot = PCI_DEV(d);
+ if (slot != 1)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int rcar_gen3_pcie_read_config(struct udevice *dev, pci_dev_t bdf,
+ uint where, ulong *val,
+ enum pci_size_t size)
+{
+ ulong reg;
+ int ret;
+
+ ret = rcar_gen3_pcie_addr_valid(bdf, where);
+ if (ret) {
+ *val = pci_get_ff(size);
+ return 0;
+ }
+
+ ret = rcar_pcie_config_access(dev, RCAR_PCI_ACCESS_READ,
+ bdf, where, ®);
+ if (ret != 0)
+ reg = 0xffffffffUL;
+
+ *val = pci_conv_32_to_size(reg, where, size);
+
+ return ret;
+}
+
+static int rcar_gen3_pcie_write_config(struct udevice *dev, pci_dev_t bdf,
+ uint where, ulong val,
+ enum pci_size_t size)
+{
+ ulong data;
+ int ret;
+
+ ret = rcar_gen3_pcie_addr_valid(bdf, where);
+ if (ret)
+ return ret;
+
+ data = pci_conv_32_to_size(val, where, size);
+
+ ret = rcar_pcie_config_access(dev, RCAR_PCI_ACCESS_WRITE,
+ bdf, where, &data);
+
+ return ret;
+}
+
+static int rcar_gen3_pcie_wait_for_phyrdy(struct udevice *dev)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+
+ return wait_for_bit_le32((void *)priv->regs + PCIEPHYSR, PHYRDY,
+ true, 50, false);
+}
+
+static int rcar_gen3_pcie_wait_for_dl(struct udevice *dev)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+
+ return wait_for_bit_le32((void *)priv->regs + PCIETSTR,
+ DATA_LINK_ACTIVE, true, 50, false);
+}
+
+static int rcar_gen3_pcie_hw_init(struct udevice *dev)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+ int ret;
+
+ /* Begin initialization */
+ writel(0, priv->regs + PCIETCTLR);
+
+ /* Set mode */
+ writel(1, priv->regs + PCIEMSR);
+
+ ret = rcar_gen3_pcie_wait_for_phyrdy(dev);
+ if (ret)
+ return ret;
+
+ /*
+ * Initial header for port config space is type 1, set the device
+ * class to match. Hardware takes care of propagating the IDSETR
+ * settings, so there is no need to bother with a quirk.
+ */
+ writel(PCI_CLASS_BRIDGE_PCI << 16, priv->regs + IDSETR1);
+
+ /*
+ * Setup Secondary Bus Number & Subordinate Bus Number, even though
+ * they aren't used, to avoid bridge being detected as broken.
+ */
+ rcar_rmw32(dev, RCONF(PCI_SECONDARY_BUS), 0xff, 1);
+ rcar_rmw32(dev, RCONF(PCI_SUBORDINATE_BUS), 0xff, 1);
+
+ /* Initialize default capabilities. */
+ rcar_rmw32(dev, REXPCAP(0), 0xff, PCI_CAP_ID_EXP);
+ rcar_rmw32(dev, REXPCAP(PCI_EXP_FLAGS),
+ PCI_EXP_FLAGS_TYPE, PCI_EXP_TYPE_ROOT_PORT << 4);
+ rcar_rmw32(dev, RCONF(PCI_HEADER_TYPE), 0x7f,
+ PCI_HEADER_TYPE_BRIDGE);
+
+ /* Enable data link layer active state reporting */
+ rcar_rmw32(dev, REXPCAP(PCI_EXP_LNKCAP),
+ PCI_EXP_LNKCAP_DLLLARC, PCI_EXP_LNKCAP_DLLLARC);
+
+ /* Write out the physical slot number = 0 */
+ rcar_rmw32(dev, REXPCAP(PCI_EXP_SLTCAP),
+ PCI_EXP_SLTCAP_PSN, 0);
+
+ /* Set the completion timer timeout to the maximum 50ms. */
+ rcar_rmw32(dev, TLCTLR + 1, 0x3f, 50);
+
+ /* Terminate list of capabilities (Next Capability Offset=0) */
+ rcar_rmw32(dev, RVCCAP(0), 0xfff00000, 0);
+
+ /* Finish initialization - establish a PCI Express link */
+ writel(CFINIT, priv->regs + PCIETCTLR);
+
+ return rcar_gen3_pcie_wait_for_dl(dev);
+}
+
+static int rcar_gen3_pcie_probe(struct udevice *dev)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+ struct pci_controller *hose = dev_get_uclass_priv(dev);
+ struct clk pci_clk;
+ u32 mask;
+ int i, cnt, ret;
+
+ ret = clk_get_by_index(dev, 0, &pci_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&pci_clk);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < hose->region_count; i++) {
+ if (hose->regions[i].flags != PCI_REGION_SYS_MEMORY)
+ continue;
+
+ if (hose->regions[i].phys_start == 0)
+ continue;
+
+ mask = (hose->regions[i].size - 1) & ~0xf;
+ mask |= LAR_ENABLE;
+ writel(hose->regions[i].phys_start, priv->regs + PCIEPRAR(0));
+ writel(hose->regions[i].phys_start, priv->regs + PCIELAR(0));
+ writel(mask, priv->regs + PCIELAMR(0));
+ break;
+ }
+
+ writel(0, priv->regs + PCIEPRAR(4));
+ writel(0, priv->regs + PCIELAR(4));
+ writel(0, priv->regs + PCIELAMR(4));
+
+ ret = rcar_gen3_pcie_hw_init(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0, cnt = 0; i < hose->region_count; i++) {
+ if (hose->regions[i].flags == PCI_REGION_SYS_MEMORY)
+ continue;
+
+ writel(0, priv->regs + PCIEPTCTLR(cnt));
+ writel((hose->regions[i].size - 1) & ~0x7f,
+ priv->regs + PCIEPAMR(cnt));
+ writel(upper_32_bits(hose->regions[i].phys_start),
+ priv->regs + PCIEPAUR(cnt));
+ writel(lower_32_bits(hose->regions[i].phys_start),
+ priv->regs + PCIEPALR(cnt));
+ mask = PAR_ENABLE;
+ if (hose->regions[i].flags == PCI_REGION_IO)
+ mask |= IO_SPACE;
+ writel(mask, priv->regs + PCIEPTCTLR(cnt));
+
+ cnt++;
+ }
+
+ return 0;
+}
+
+static int rcar_gen3_pcie_ofdata_to_platdata(struct udevice *dev)
+{
+ struct rcar_gen3_pcie_priv *priv = dev_get_platdata(dev);
+
+ priv->regs = devfdt_get_addr_index(dev, 0);
+ if (!priv->regs)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct dm_pci_ops rcar_gen3_pcie_ops = {
+ .read_config = rcar_gen3_pcie_read_config,
+ .write_config = rcar_gen3_pcie_write_config,
+};
+
+static const struct udevice_id rcar_gen3_pcie_ids[] = {
+ { .compatible = "renesas,pcie-rcar-gen3" },
+ { }
+};
+
+U_BOOT_DRIVER(rcar_gen3_pcie) = {
+ .name = "rcar_gen3_pcie",
+ .id = UCLASS_PCI,
+ .of_match = rcar_gen3_pcie_ids,
+ .ops = &rcar_gen3_pcie_ops,
+ .probe = rcar_gen3_pcie_probe,
+ .ofdata_to_platdata = rcar_gen3_pcie_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct rcar_gen3_pcie_priv),
+};
#
# QUICC Engine Drivers
#
+config QE
+ bool "Enable support for QUICC Engine"
+ depends on PPC
+ default y if ARCH_T1040 || ARCH_T1042 || ARCH_T1024 || ARCH_P1021 \
+ || ARCH_P1025
+ help
+ Chose this option to add support for the QUICC Engine.
+
config U_QE
bool "Enable support for U QUICC Engine"
default y if (ARCH_LS1021A && !SD_BOOT && !NAND_BOOT && !QSPI_BOOT) \
|| (TARGET_LS1043ARDB && !SPL_NO_QE && !NAND_BOOT && !QSPI_BOOT)
help
Choose this option to add support for U QUICC Engine.
+
+choice
+ prompt "QUICC Engine FMan ethernet firmware location"
+ depends on FMAN_ENET || QE
+ default SYS_QE_FMAN_FW_IN_ROM
+
+config SYS_QE_FMAN_FW_IN_NOR
+ bool "NOR flash"
+
+config SYS_QE_FMAN_FW_IN_NAND
+ bool "NAND flash"
+
+config SYS_QE_FMAN_FW_IN_SPIFLASH
+ bool "SPI flash"
+
+config SYS_QE_FMAN_FW_IN_MMC
+ bool "MMC"
+
+config SYS_QE_FMAN_FW_IN_REMOTE
+ bool "Remote memory location (PCI)"
+
+config SYS_QE_FMAN_FW_IN_ROM
+ bool "Firmware is already in ROM"
+
+endchoice
family: support for LPDDR2, LPDDR3 and DDR3
the SDRAM parameters for controleur and phy need to be provided
in device tree (computed by DDR tuning tools)
+
+config STM32MP1_DDR_INTERACTIVE
+ bool "STM32MP1 DDR driver : interactive support"
+ depends on STM32MP1_DDR
+ help
+ activate interactive support in STM32MP1 DDR controller driver
+ used for DDR tuning tools
+ to enter in intercative mode type 'd' during SPL DDR driver
+ initialisation
+
+config STM32MP1_DDR_INTERACTIVE_FORCE
+ bool "STM32MP1 DDR driver : force interactive mode"
+ depends on STM32MP1_DDR_INTERACTIVE
+ default n
+ help
+ force interactive mode in STM32MP1 DDR controller driver
+ skip the polling of character 'd' in console
+ useful when SPL is loaded in sysram
+ directly by programmer
+
+config STM32MP1_DDR_TESTS
+ bool "STM32MP1 DDR driver : tests support"
+ depends on STM32MP1_DDR_INTERACTIVE
+ default y
+ help
+ activate test support for interactive support in
+ STM32MP1 DDR controller driver: command test
+
+config STM32MP1_DDR_TUNING
+ bool "STM32MP1 DDR driver : support of tuning"
+ depends on STM32MP1_DDR_INTERACTIVE
+ default y
+ help
+ activate tuning command in STM32MP1 DDR interactive mode
+ used for DDR tuning tools
+ - DQ Deskew algorithm
+ - DQS Trimming
obj-y += stm32mp1_ram.o
obj-y += stm32mp1_ddr.o
+
+obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += stm32mp1_interactive.o
+obj-$(CONFIG_STM32MP1_DDR_TESTS) += stm32mp1_tests.o
+obj-$(CONFIG_STM32MP1_DDR_TUNING) += stm32mp1_tuning.o
+
+ifneq ($(DDR_INTERACTIVE),)
+CFLAGS_stm32mp1_interactive.o += -DCONFIG_STM32MP1_DDR_INTERACTIVE_FORCE=y
+endif
offsetof(struct stm32mp1_ddrphy, x),\
offsetof(struct y, x)}
+#define DDR_REG_DYN(x) \
+ {#x,\
+ offsetof(struct stm32mp1_ddrctl, x),\
+ INVALID_OFFSET}
+
+#define DDRPHY_REG_DYN(x) \
+ {#x,\
+ offsetof(struct stm32mp1_ddrphy, x),\
+ INVALID_OFFSET}
+
+/***********************************************************
+ * PARAMETERS: value get from device tree :
+ * size / order need to be aligned with binding
+ * modification NOT ALLOWED !!!
+ ***********************************************************/
+#define DDRCTL_REG_REG_SIZE 25 /* st,ctl-reg */
+#define DDRCTL_REG_TIMING_SIZE 12 /* st,ctl-timing */
+#define DDRCTL_REG_MAP_SIZE 9 /* st,ctl-map */
+#define DDRCTL_REG_PERF_SIZE 17 /* st,ctl-perf */
+
+#define DDRPHY_REG_REG_SIZE 11 /* st,phy-reg */
+#define DDRPHY_REG_TIMING_SIZE 10 /* st,phy-timing */
+#define DDRPHY_REG_CAL_SIZE 12 /* st,phy-cal */
+
#define DDRCTL_REG_REG(x) DDRCTL_REG(x, stm32mp1_ddrctrl_reg)
-static const struct reg_desc ddr_reg[] = {
+static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = {
DDRCTL_REG_REG(mstr),
DDRCTL_REG_REG(mrctrl0),
DDRCTL_REG_REG(mrctrl1),
};
#define DDRCTL_REG_TIMING(x) DDRCTL_REG(x, stm32mp1_ddrctrl_timing)
-static const struct reg_desc ddr_timing[] = {
+static const struct reg_desc ddr_timing[DDRCTL_REG_TIMING_SIZE] = {
DDRCTL_REG_TIMING(rfshtmg),
DDRCTL_REG_TIMING(dramtmg0),
DDRCTL_REG_TIMING(dramtmg1),
};
#define DDRCTL_REG_MAP(x) DDRCTL_REG(x, stm32mp1_ddrctrl_map)
-static const struct reg_desc ddr_map[] = {
+static const struct reg_desc ddr_map[DDRCTL_REG_MAP_SIZE] = {
DDRCTL_REG_MAP(addrmap1),
DDRCTL_REG_MAP(addrmap2),
DDRCTL_REG_MAP(addrmap3),
};
#define DDRCTL_REG_PERF(x) DDRCTL_REG(x, stm32mp1_ddrctrl_perf)
-static const struct reg_desc ddr_perf[] = {
+static const struct reg_desc ddr_perf[DDRCTL_REG_PERF_SIZE] = {
DDRCTL_REG_PERF(sched),
DDRCTL_REG_PERF(sched1),
DDRCTL_REG_PERF(perfhpr1),
};
#define DDRPHY_REG_REG(x) DDRPHY_REG(x, stm32mp1_ddrphy_reg)
-static const struct reg_desc ddrphy_reg[] = {
+static const struct reg_desc ddrphy_reg[DDRPHY_REG_REG_SIZE] = {
DDRPHY_REG_REG(pgcr),
DDRPHY_REG_REG(aciocr),
DDRPHY_REG_REG(dxccr),
};
#define DDRPHY_REG_TIMING(x) DDRPHY_REG(x, stm32mp1_ddrphy_timing)
-static const struct reg_desc ddrphy_timing[] = {
+static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = {
DDRPHY_REG_TIMING(ptr0),
DDRPHY_REG_TIMING(ptr1),
DDRPHY_REG_TIMING(ptr2),
};
#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal)
-static const struct reg_desc ddrphy_cal[] = {
+static const struct reg_desc ddrphy_cal[DDRPHY_REG_CAL_SIZE] = {
DDRPHY_REG_CAL(dx0dllcr),
DDRPHY_REG_CAL(dx0dqtr),
DDRPHY_REG_CAL(dx0dqstr),
DDRPHY_REG_CAL(dx3dqstr),
};
+/**************************************************************
+ * DYNAMIC REGISTERS: only used for debug purpose (read/modify)
+ **************************************************************/
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+static const struct reg_desc ddr_dyn[] = {
+ DDR_REG_DYN(stat),
+ DDR_REG_DYN(init0),
+ DDR_REG_DYN(dfimisc),
+ DDR_REG_DYN(dfistat),
+ DDR_REG_DYN(swctl),
+ DDR_REG_DYN(swstat),
+ DDR_REG_DYN(pctrl_0),
+ DDR_REG_DYN(pctrl_1),
+};
+
+#define DDR_REG_DYN_SIZE ARRAY_SIZE(ddr_dyn)
+
+static const struct reg_desc ddrphy_dyn[] = {
+ DDRPHY_REG_DYN(pir),
+ DDRPHY_REG_DYN(pgsr),
+ DDRPHY_REG_DYN(zq0sr0),
+ DDRPHY_REG_DYN(zq0sr1),
+ DDRPHY_REG_DYN(dx0gsr0),
+ DDRPHY_REG_DYN(dx0gsr1),
+ DDRPHY_REG_DYN(dx1gsr0),
+ DDRPHY_REG_DYN(dx1gsr1),
+ DDRPHY_REG_DYN(dx2gsr0),
+ DDRPHY_REG_DYN(dx2gsr1),
+ DDRPHY_REG_DYN(dx3gsr0),
+ DDRPHY_REG_DYN(dx3gsr1),
+};
+
+#define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn)
+
+#endif
+
+/*****************************************************************
+ * REGISTERS ARRAY: used to parse device tree and interactive mode
+ *****************************************************************/
enum reg_type {
REG_REG,
REG_TIMING,
REGPHY_REG,
REGPHY_TIMING,
REGPHY_CAL,
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+/* dynamic registers => managed in driver or not changed,
+ * can be dumped in interactive mode
+ */
+ REG_DYN,
+ REGPHY_DYN,
+#endif
REG_TYPE_NB
};
const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = {
[REG_REG] = {
- "static", ddr_reg, ARRAY_SIZE(ddr_reg), DDR_BASE},
+ "static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE},
[REG_TIMING] = {
- "timing", ddr_timing, ARRAY_SIZE(ddr_timing), DDR_BASE},
+ "timing", ddr_timing, DDRCTL_REG_TIMING_SIZE, DDR_BASE},
[REG_PERF] = {
- "perf", ddr_perf, ARRAY_SIZE(ddr_perf), DDR_BASE},
+ "perf", ddr_perf, DDRCTL_REG_PERF_SIZE, DDR_BASE},
[REG_MAP] = {
- "map", ddr_map, ARRAY_SIZE(ddr_map), DDR_BASE},
+ "map", ddr_map, DDRCTL_REG_MAP_SIZE, DDR_BASE},
[REGPHY_REG] = {
- "static", ddrphy_reg, ARRAY_SIZE(ddrphy_reg), DDRPHY_BASE},
+ "static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE},
[REGPHY_TIMING] = {
- "timing", ddrphy_timing, ARRAY_SIZE(ddrphy_timing), DDRPHY_BASE},
+ "timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE},
[REGPHY_CAL] = {
- "cal", ddrphy_cal, ARRAY_SIZE(ddrphy_cal), DDRPHY_BASE},
+ "cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE},
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+[REG_DYN] = {
+ "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE},
+[REGPHY_DYN] = {
+ "dyn", ddrphy_dyn, DDRPHY_REG_DYN_SIZE, DDRPHY_BASE},
+#endif
+
};
const char *base_name[] = {
}
}
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+static void stm32mp1_dump_reg_desc(u32 base_addr, const struct reg_desc *desc)
+{
+ unsigned int *ptr;
+
+ ptr = (unsigned int *)(base_addr + desc->offset);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+
+static void stm32mp1_dump_param_desc(u32 par_addr, const struct reg_desc *desc)
+{
+ unsigned int *ptr;
+
+ ptr = (unsigned int *)(par_addr + desc->par_offset);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+
+static const struct reg_desc *found_reg(const char *name, enum reg_type *type)
+{
+ unsigned int i, j;
+ const struct reg_desc *desc;
+
+ for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) {
+ desc = ddr_registers[i].desc;
+ for (j = 0; j < ddr_registers[i].size; j++) {
+ if (strcmp(name, desc[j].name) == 0) {
+ *type = i;
+ return &desc[j];
+ }
+ }
+ }
+ *type = REG_TYPE_NB;
+ return NULL;
+}
+
+int stm32mp1_dump_reg(const struct ddr_info *priv,
+ const char *name)
+{
+ unsigned int i, j;
+ const struct reg_desc *desc;
+ u32 base_addr;
+ enum base_type p_base;
+ enum reg_type type;
+ const char *p_name;
+ enum base_type filter = NONE_BASE;
+ int result = -1;
+
+ if (name) {
+ if (strcmp(name, base_name[DDR_BASE]) == 0)
+ filter = DDR_BASE;
+ else if (strcmp(name, base_name[DDRPHY_BASE]) == 0)
+ filter = DDRPHY_BASE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) {
+ p_base = ddr_registers[i].base;
+ p_name = ddr_registers[i].name;
+ if (!name || (filter == p_base || !strcmp(name, p_name))) {
+ result = 0;
+ desc = ddr_registers[i].desc;
+ base_addr = get_base_addr(priv, p_base);
+ printf("==%s.%s==\n", base_name[p_base], p_name);
+ for (j = 0; j < ddr_registers[i].size; j++)
+ stm32mp1_dump_reg_desc(base_addr, &desc[j]);
+ }
+ }
+ if (result) {
+ desc = found_reg(name, &type);
+ if (desc) {
+ p_base = ddr_registers[type].base;
+ base_addr = get_base_addr(priv, p_base);
+ stm32mp1_dump_reg_desc(base_addr, desc);
+ result = 0;
+ }
+ }
+ return result;
+}
+
+void stm32mp1_edit_reg(const struct ddr_info *priv,
+ char *name, char *string)
+{
+ unsigned long *ptr, value;
+ enum reg_type type;
+ enum base_type base;
+ const struct reg_desc *desc;
+ u32 base_addr;
+
+ desc = found_reg(name, &type);
+
+ if (!desc) {
+ printf("%s not found\n", name);
+ return;
+ }
+ if (strict_strtoul(string, 16, &value) < 0) {
+ printf("invalid value %s\n", string);
+ return;
+ }
+ base = ddr_registers[type].base;
+ base_addr = get_base_addr(priv, base);
+ ptr = (unsigned long *)(base_addr + desc->offset);
+ writel(value, ptr);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+
+static u32 get_par_addr(const struct stm32mp1_ddr_config *config,
+ enum reg_type type)
+{
+ u32 par_addr = 0x0;
+
+ switch (type) {
+ case REG_REG:
+ par_addr = (u32)&config->c_reg;
+ break;
+ case REG_TIMING:
+ par_addr = (u32)&config->c_timing;
+ break;
+ case REG_PERF:
+ par_addr = (u32)&config->c_perf;
+ break;
+ case REG_MAP:
+ par_addr = (u32)&config->c_map;
+ break;
+ case REGPHY_REG:
+ par_addr = (u32)&config->p_reg;
+ break;
+ case REGPHY_TIMING:
+ par_addr = (u32)&config->p_timing;
+ break;
+ case REGPHY_CAL:
+ par_addr = (u32)&config->p_cal;
+ break;
+ case REG_DYN:
+ case REGPHY_DYN:
+ case REG_TYPE_NB:
+ par_addr = (u32)NULL;
+ break;
+ }
+
+ return par_addr;
+}
+
+int stm32mp1_dump_param(const struct stm32mp1_ddr_config *config,
+ const char *name)
+{
+ unsigned int i, j;
+ const struct reg_desc *desc;
+ u32 par_addr;
+ enum base_type p_base;
+ enum reg_type type;
+ const char *p_name;
+ enum base_type filter = NONE_BASE;
+ int result = -EINVAL;
+
+ if (name) {
+ if (strcmp(name, base_name[DDR_BASE]) == 0)
+ filter = DDR_BASE;
+ else if (strcmp(name, base_name[DDRPHY_BASE]) == 0)
+ filter = DDRPHY_BASE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) {
+ par_addr = get_par_addr(config, i);
+ if (!par_addr)
+ continue;
+ p_base = ddr_registers[i].base;
+ p_name = ddr_registers[i].name;
+ if (!name || (filter == p_base || !strcmp(name, p_name))) {
+ result = 0;
+ desc = ddr_registers[i].desc;
+ printf("==%s.%s==\n", base_name[p_base], p_name);
+ for (j = 0; j < ddr_registers[i].size; j++)
+ stm32mp1_dump_param_desc(par_addr, &desc[j]);
+ }
+ }
+ if (result) {
+ desc = found_reg(name, &type);
+ if (desc) {
+ par_addr = get_par_addr(config, type);
+ if (par_addr) {
+ stm32mp1_dump_param_desc(par_addr, desc);
+ result = 0;
+ }
+ }
+ }
+ return result;
+}
+
+void stm32mp1_edit_param(const struct stm32mp1_ddr_config *config,
+ char *name, char *string)
+{
+ unsigned long *ptr, value;
+ enum reg_type type;
+ const struct reg_desc *desc;
+ u32 par_addr;
+
+ desc = found_reg(name, &type);
+ if (!desc) {
+ printf("%s not found\n", name);
+ return;
+ }
+ if (strict_strtoul(string, 16, &value) < 0) {
+ printf("invalid value %s\n", string);
+ return;
+ }
+ par_addr = get_par_addr(config, type);
+ if (!par_addr) {
+ printf("no parameter %s\n", name);
+ return;
+ }
+ ptr = (unsigned long *)(par_addr + desc->par_offset);
+ writel(value, ptr);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+#endif
+
+__weak bool stm32mp1_ddr_interactive(void *priv,
+ enum stm32mp1_ddr_interact_step step,
+ const struct stm32mp1_ddr_config *config)
+{
+ return false;
+}
+
+#define INTERACTIVE(step)\
+ stm32mp1_ddr_interactive(priv, step, config)
+
static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy)
{
u32 pgsr;
/* self-refresh due to software => check also STAT.selfref_type */
if (mode == DDRCTRL_STAT_OPERATING_MODE_SR) {
mask |= DDRCTRL_STAT_SELFREF_TYPE_MASK;
- stat |= DDRCTRL_STAT_SELFREF_TYPE_SR;
+ val |= DDRCTRL_STAT_SELFREF_TYPE_SR;
} else if (mode == DDRCTRL_STAT_OPERATING_MODE_NORMAL) {
/* normal mode: handle also automatic self refresh */
mask2 = DDRCTRL_STAT_OPERATING_MODE_MASK |
}
/* board-specific DDR power initializations. */
-__weak int board_ddr_power_init(void)
+__weak int board_ddr_power_init(enum ddr_type ddr_type)
{
return 0;
}
const struct stm32mp1_ddr_config *config)
{
u32 pir;
- int ret;
+ int ret = -EINVAL;
- ret = board_ddr_power_init();
+ if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3)
+ ret = board_ddr_power_init(STM32MP_DDR3);
+ else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR2)
+ ret = board_ddr_power_init(STM32MP_LPDDR2);
+ else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR3)
+ ret = board_ddr_power_init(STM32MP_LPDDR3);
if (ret)
panic("ddr power init failed\n");
+start:
debug("name = %s\n", config->info.name);
- debug("speed = %d MHz\n", config->info.speed);
+ debug("speed = %d kHz\n", config->info.speed);
debug("size = 0x%x\n", config->info.size);
/*
* 1. Program the DWC_ddr_umctl2 registers
/* 1.2. start CLOCK */
if (stm32mp1_ddr_clk_enable(priv, config->info.speed))
- panic("invalid DRAM clock : %d MHz\n",
+ panic("invalid DRAM clock : %d kHz\n",
config->info.speed);
/* 1.3. deassert reset */
*/
clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAPBRST);
-/* 1.4. wait 4 cycles for synchronization */
- asm(" nop");
- asm(" nop");
- asm(" nop");
- asm(" nop");
+/* 1.4. wait 128 cycles to permit initialization of end logic */
+ udelay(2);
+ /* for PCLK = 133MHz => 1 us is enough, 2 to allow lower frequency */
+
+ if (INTERACTIVE(STEP_DDR_RESET))
+ goto start;
/* 1.5. initialize registers ddr_umctl2 */
/* Stop uMCTL2 before PHY is ready */
set_reg(priv, REG_PERF, &config->c_perf);
+ if (INTERACTIVE(STEP_CTL_INIT))
+ goto start;
+
/* 2. deassert reset signal core_ddrc_rstn, aresetn and presetn */
clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCORERST);
clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAXIRST);
set_reg(priv, REGPHY_TIMING, &config->p_timing);
set_reg(priv, REGPHY_CAL, &config->p_cal);
+ if (INTERACTIVE(STEP_PHY_INIT))
+ goto start;
+
/* 4. Monitor PHY init status by polling PUBL register PGSR.IDONE
* Perform DDR PHY DRAM initialization and Gate Training Evaluation
*/
/* enable uMCTL2 AXI port 0 and 1 */
setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN);
setbits_le32(&priv->ctl->pctrl_1, DDRCTRL_PCTRL_N_PORT_EN);
+
+ if (INTERACTIVE(STEP_DDR_READY))
+ goto start;
}
struct stm32mp1_ddr_info {
const char *name;
- u16 speed; /* in MHZ */
+ u32 speed; /* in kHZ */
u32 size; /* memory size in byte = col * row * width */
};
struct stm32mp1_ddrphy_cal p_cal;
};
-int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u16 mem_speed);
+int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u32 mem_speed);
void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir);
void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl);
void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl,
/* DDRCTRL REGISTERS */
#define DDRCTRL_MSTR_DDR3 BIT(0)
+#define DDRCTRL_MSTR_LPDDR2 BIT(2)
+#define DDRCTRL_MSTR_LPDDR3 BIT(3)
#define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK GENMASK(13, 12)
#define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL (0 << 12)
#define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF (1 << 12)
#define DDRPHYC_DXNGCR_DXEN BIT(0)
+#define DDRPHYC_DXNDLLCR_DLLSRST BIT(30)
#define DDRPHYC_DXNDLLCR_DLLDIS BIT(31)
#define DDRPHYC_DXNDLLCR_SDPHASE_MASK GENMASK(17, 14)
#define DDRPHYC_DXNDLLCR_SDPHASE_SHIFT 14
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <console.h>
+#include <cli.h>
+#include <clk.h>
+#include <malloc.h>
+#include <ram.h>
+#include <reset.h>
+#include "stm32mp1_ddr.h"
+#include "stm32mp1_tests.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum ddr_command {
+ DDR_CMD_HELP,
+ DDR_CMD_INFO,
+ DDR_CMD_FREQ,
+ DDR_CMD_RESET,
+ DDR_CMD_PARAM,
+ DDR_CMD_PRINT,
+ DDR_CMD_EDIT,
+ DDR_CMD_STEP,
+ DDR_CMD_NEXT,
+ DDR_CMD_GO,
+ DDR_CMD_TEST,
+ DDR_CMD_TUNING,
+ DDR_CMD_UNKNOWN,
+};
+
+const char *step_str[] = {
+ [STEP_DDR_RESET] = "DDR_RESET",
+ [STEP_CTL_INIT] = "DDR_CTRL_INIT_DONE",
+ [STEP_PHY_INIT] = "DDR PHY_INIT_DONE",
+ [STEP_DDR_READY] = "DDR_READY",
+ [STEP_RUN] = "RUN"
+};
+
+enum ddr_command stm32mp1_get_command(char *cmd, int argc)
+{
+ const char *cmd_string[DDR_CMD_UNKNOWN] = {
+ [DDR_CMD_HELP] = "help",
+ [DDR_CMD_INFO] = "info",
+ [DDR_CMD_FREQ] = "freq",
+ [DDR_CMD_RESET] = "reset",
+ [DDR_CMD_PARAM] = "param",
+ [DDR_CMD_PRINT] = "print",
+ [DDR_CMD_EDIT] = "edit",
+ [DDR_CMD_STEP] = "step",
+ [DDR_CMD_NEXT] = "next",
+ [DDR_CMD_GO] = "go",
+#ifdef CONFIG_STM32MP1_DDR_TESTS
+ [DDR_CMD_TEST] = "test",
+#endif
+#ifdef CONFIG_STM32MP1_DDR_TUNING
+ [DDR_CMD_TUNING] = "tuning",
+#endif
+ };
+ /* min and max number of argument */
+ const char cmd_arg[DDR_CMD_UNKNOWN][2] = {
+ [DDR_CMD_HELP] = { 0, 0 },
+ [DDR_CMD_INFO] = { 0, 255 },
+ [DDR_CMD_FREQ] = { 0, 1 },
+ [DDR_CMD_RESET] = { 0, 0 },
+ [DDR_CMD_PARAM] = { 0, 2 },
+ [DDR_CMD_PRINT] = { 0, 1 },
+ [DDR_CMD_EDIT] = { 2, 2 },
+ [DDR_CMD_STEP] = { 0, 1 },
+ [DDR_CMD_NEXT] = { 0, 0 },
+ [DDR_CMD_GO] = { 0, 0 },
+#ifdef CONFIG_STM32MP1_DDR_TESTS
+ [DDR_CMD_TEST] = { 0, 255 },
+#endif
+#ifdef CONFIG_STM32MP1_DDR_TUNING
+ [DDR_CMD_TUNING] = { 0, 255 },
+#endif
+ };
+ int i;
+
+ for (i = 0; i < DDR_CMD_UNKNOWN; i++)
+ if (!strcmp(cmd, cmd_string[i])) {
+ if (argc - 1 < cmd_arg[i][0]) {
+ printf("no enought argument (min=%d)\n",
+ cmd_arg[i][0]);
+ return DDR_CMD_UNKNOWN;
+ } else if (argc - 1 > cmd_arg[i][1]) {
+ printf("too many argument (max=%d)\n",
+ cmd_arg[i][1]);
+ return DDR_CMD_UNKNOWN;
+ } else {
+ return i;
+ }
+ }
+
+ printf("unknown command %s\n", cmd);
+ return DDR_CMD_UNKNOWN;
+}
+
+static void stm32mp1_do_usage(void)
+{
+ const char *usage = {
+ "commands:\n\n"
+ "help displays help\n"
+ "info displays DDR information\n"
+ "info <param> <val> changes DDR information\n"
+ " with <param> = step, name, size or speed\n"
+ "freq displays the DDR PHY frequency in kHz\n"
+ "freq <freq> changes the DDR PHY frequency\n"
+ "param [type|reg] prints input parameters\n"
+ "param <reg> <val> edits parameters in step 0\n"
+ "print [type|reg] dumps registers\n"
+ "edit <reg> <val> modifies one register\n"
+ "step lists the available step\n"
+ "step <n> go to the step <n>\n"
+ "next goes to the next step\n"
+ "go continues the U-Boot SPL execution\n"
+ "reset reboots machine\n"
+#ifdef CONFIG_STM32MP1_DDR_TESTS
+ "test [help] | <n> [...] lists (with help) or executes test <n>\n"
+#endif
+#ifdef CONFIG_STM32MP1_DDR_TUNING
+ "tuning [help] | <n> [...] lists (with help) or execute tuning <n>\n"
+#endif
+ "\nwith for [type|reg]:\n"
+ " all registers if absent\n"
+ " <type> = ctl, phy\n"
+ " or one category (static, timing, map, perf, cal, dyn)\n"
+ " <reg> = name of the register\n"
+ };
+
+ puts(usage);
+}
+
+static bool stm32mp1_check_step(enum stm32mp1_ddr_interact_step step,
+ enum stm32mp1_ddr_interact_step expected)
+{
+ if (step != expected) {
+ printf("invalid step %d:%s expecting %d:%s\n",
+ step, step_str[step],
+ expected,
+ step_str[expected]);
+ return false;
+ }
+ return true;
+}
+
+static void stm32mp1_do_info(struct ddr_info *priv,
+ struct stm32mp1_ddr_config *config,
+ enum stm32mp1_ddr_interact_step step,
+ int argc, char * const argv[])
+{
+ unsigned long value;
+ static char *ddr_name;
+
+ if (argc == 1) {
+ printf("step = %d : %s\n", step, step_str[step]);
+ printf("name = %s\n", config->info.name);
+ printf("size = 0x%x\n", config->info.size);
+ printf("speed = %d kHz\n", config->info.speed);
+ return;
+ }
+
+ if (argc < 3) {
+ printf("no enought parameter\n");
+ return;
+ }
+ if (!strcmp(argv[1], "name")) {
+ u32 i, name_len = 0;
+
+ for (i = 2; i < argc; i++)
+ name_len += strlen(argv[i]) + 1;
+ if (ddr_name)
+ free(ddr_name);
+ ddr_name = malloc(name_len);
+ config->info.name = ddr_name;
+ if (!ddr_name) {
+ printf("alloc error, length %d\n", name_len);
+ return;
+ }
+ strcpy(ddr_name, argv[2]);
+ for (i = 3; i < argc; i++) {
+ strcat(ddr_name, " ");
+ strcat(ddr_name, argv[i]);
+ }
+ printf("name = %s\n", ddr_name);
+ return;
+ }
+ if (!strcmp(argv[1], "size")) {
+ if (strict_strtoul(argv[2], 16, &value) < 0) {
+ printf("invalid value %s\n", argv[2]);
+ } else {
+ config->info.size = value;
+ printf("size = 0x%x\n", config->info.size);
+ }
+ return;
+ }
+ if (!strcmp(argv[1], "speed")) {
+ if (strict_strtoul(argv[2], 10, &value) < 0) {
+ printf("invalid value %s\n", argv[2]);
+ } else {
+ config->info.speed = value;
+ printf("speed = %d kHz\n", config->info.speed);
+ value = clk_get_rate(&priv->clk);
+ printf("DDRPHY = %ld kHz\n", value / 1000);
+ }
+ return;
+ }
+ printf("argument %s invalid\n", argv[1]);
+}
+
+static bool stm32mp1_do_freq(struct ddr_info *priv,
+ int argc, char * const argv[])
+{
+ unsigned long ddrphy_clk;
+
+ if (argc == 2) {
+ if (strict_strtoul(argv[1], 0, &ddrphy_clk) < 0) {
+ printf("invalid argument %s", argv[1]);
+ return false;
+ }
+ if (clk_set_rate(&priv->clk, ddrphy_clk * 1000)) {
+ printf("ERROR: update failed!\n");
+ return false;
+ }
+ }
+ ddrphy_clk = clk_get_rate(&priv->clk);
+ printf("DDRPHY = %ld kHz\n", ddrphy_clk / 1000);
+ if (argc == 2)
+ return true;
+ return false;
+}
+
+static void stm32mp1_do_param(enum stm32mp1_ddr_interact_step step,
+ const struct stm32mp1_ddr_config *config,
+ int argc, char * const argv[])
+{
+ switch (argc) {
+ case 1:
+ stm32mp1_dump_param(config, NULL);
+ break;
+ case 2:
+ if (stm32mp1_dump_param(config, argv[1]))
+ printf("invalid argument %s\n",
+ argv[1]);
+ break;
+ case 3:
+ if (!stm32mp1_check_step(step, STEP_DDR_RESET))
+ return;
+ stm32mp1_edit_param(config, argv[1], argv[2]);
+ break;
+ }
+}
+
+static void stm32mp1_do_print(struct ddr_info *priv,
+ int argc, char * const argv[])
+{
+ switch (argc) {
+ case 1:
+ stm32mp1_dump_reg(priv, NULL);
+ break;
+ case 2:
+ if (stm32mp1_dump_reg(priv, argv[1]))
+ printf("invalid argument %s\n",
+ argv[1]);
+ break;
+ }
+}
+
+static int stm32mp1_do_step(enum stm32mp1_ddr_interact_step step,
+ int argc, char * const argv[])
+{
+ int i;
+ unsigned long value;
+
+ switch (argc) {
+ case 1:
+ for (i = 0; i < ARRAY_SIZE(step_str); i++)
+ printf("%d:%s\n", i, step_str[i]);
+ break;
+
+ case 2:
+ if ((strict_strtoul(argv[1], 0,
+ &value) < 0) ||
+ value >= ARRAY_SIZE(step_str)) {
+ printf("invalid argument %s\n",
+ argv[1]);
+ goto end;
+ }
+
+ if (value != STEP_DDR_RESET &&
+ value <= step) {
+ printf("invalid target %d:%s, current step is %d:%s\n",
+ (int)value, step_str[value],
+ step, step_str[step]);
+ goto end;
+ }
+ printf("step to %d:%s\n",
+ (int)value, step_str[value]);
+ return (int)value;
+ };
+
+end:
+ return step;
+}
+
+#if defined(CONFIG_STM32MP1_DDR_TESTS) || defined(CONFIG_STM32MP1_DDR_TUNING)
+static const char * const s_result[] = {
+ [TEST_PASSED] = "Pass",
+ [TEST_FAILED] = "Failed",
+ [TEST_ERROR] = "Error"
+};
+
+static void stm32mp1_ddr_subcmd(struct ddr_info *priv,
+ int argc, char *argv[],
+ const struct test_desc array[],
+ const int array_nb)
+{
+ int i;
+ unsigned long value;
+ int result;
+ char string[50] = "";
+
+ if (argc == 1) {
+ printf("%s:%d\n", argv[0], array_nb);
+ for (i = 0; i < array_nb; i++)
+ printf("%d:%s:%s\n",
+ i, array[i].name, array[i].usage);
+ return;
+ }
+ if (argc > 1 && !strcmp(argv[1], "help")) {
+ printf("%s:%d\n", argv[0], array_nb);
+ for (i = 0; i < array_nb; i++)
+ printf("%d:%s:%s:%s\n", i,
+ array[i].name, array[i].usage, array[i].help);
+ return;
+ }
+
+ if ((strict_strtoul(argv[1], 0, &value) < 0) ||
+ value >= array_nb) {
+ sprintf(string, "invalid argument %s",
+ argv[1]);
+ result = TEST_FAILED;
+ goto end;
+ }
+
+ if (argc > (array[value].max_args + 2)) {
+ sprintf(string, "invalid nb of args %d, max %d",
+ argc - 2, array[value].max_args);
+ result = TEST_FAILED;
+ goto end;
+ }
+
+ printf("execute %d:%s\n", (int)value, array[value].name);
+ clear_ctrlc();
+ result = array[value].fct(priv->ctl, priv->phy,
+ string, argc - 2, &argv[2]);
+
+end:
+ printf("Result: %s [%s]\n", s_result[result], string);
+}
+#endif
+
+bool stm32mp1_ddr_interactive(void *priv,
+ enum stm32mp1_ddr_interact_step step,
+ const struct stm32mp1_ddr_config *config)
+{
+ const char *prompt = "DDR>";
+ char buffer[CONFIG_SYS_CBSIZE];
+ char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */
+ int argc;
+ static int next_step = -1;
+
+ if (next_step < 0 && step == STEP_DDR_RESET) {
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE_FORCE
+ gd->flags &= ~(GD_FLG_SILENT |
+ GD_FLG_DISABLE_CONSOLE);
+ next_step = STEP_DDR_RESET;
+#else
+ unsigned long start = get_timer(0);
+
+ while (1) {
+ if (tstc() && (getc() == 'd')) {
+ next_step = STEP_DDR_RESET;
+ break;
+ }
+ if (get_timer(start) > 100)
+ break;
+ }
+#endif
+ }
+
+ debug("** step %d ** %s / %d\n", step, step_str[step], next_step);
+
+ if (next_step < 0)
+ return false;
+
+ if (step < 0 || step > ARRAY_SIZE(step_str)) {
+ printf("** step %d ** INVALID\n", step);
+ return false;
+ }
+
+ printf("%d:%s\n", step, step_str[step]);
+ printf("%s\n", prompt);
+
+ if (next_step > step)
+ return false;
+
+ while (next_step == step) {
+ cli_readline_into_buffer(prompt, buffer, 0);
+ argc = cli_simple_parse_line(buffer, argv);
+ if (!argc)
+ continue;
+
+ switch (stm32mp1_get_command(argv[0], argc)) {
+ case DDR_CMD_HELP:
+ stm32mp1_do_usage();
+ break;
+
+ case DDR_CMD_INFO:
+ stm32mp1_do_info(priv,
+ (struct stm32mp1_ddr_config *)config,
+ step, argc, argv);
+ break;
+
+ case DDR_CMD_FREQ:
+ if (stm32mp1_do_freq(priv, argc, argv))
+ next_step = STEP_DDR_RESET;
+ break;
+
+ case DDR_CMD_RESET:
+ do_reset(NULL, 0, 0, NULL);
+ break;
+
+ case DDR_CMD_PARAM:
+ stm32mp1_do_param(step, config, argc, argv);
+ break;
+
+ case DDR_CMD_PRINT:
+ stm32mp1_do_print(priv, argc, argv);
+ break;
+
+ case DDR_CMD_EDIT:
+ stm32mp1_edit_reg(priv, argv[1], argv[2]);
+ break;
+
+ case DDR_CMD_GO:
+ next_step = STEP_RUN;
+ break;
+
+ case DDR_CMD_NEXT:
+ next_step = step + 1;
+ break;
+
+ case DDR_CMD_STEP:
+ next_step = stm32mp1_do_step(step, argc, argv);
+ break;
+
+#ifdef CONFIG_STM32MP1_DDR_TESTS
+ case DDR_CMD_TEST:
+ if (!stm32mp1_check_step(step, STEP_DDR_READY))
+ continue;
+ stm32mp1_ddr_subcmd(priv, argc, argv, test, test_nb);
+ break;
+#endif
+
+#ifdef CONFIG_STM32MP1_DDR_TUNING
+ case DDR_CMD_TUNING:
+ if (!stm32mp1_check_step(step, STEP_DDR_READY))
+ continue;
+ stm32mp1_ddr_subcmd(priv, argc, argv,
+ tuning, tuning_nb);
+ break;
+#endif
+
+ default:
+ break;
+ }
+ }
+ return next_step == STEP_DDR_RESET;
+}
"ddrphyc" /* LAST clock => used for get_rate() */
};
-int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
+int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed)
{
unsigned long ddrphy_clk;
unsigned long ddr_clk;
priv->clk = clk;
ddrphy_clk = clk_get_rate(&priv->clk);
- debug("DDR: mem_speed (%d MHz), RCC %d MHz\n",
- mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
+ debug("DDR: mem_speed (%d kHz), RCC %d kHz\n",
+ mem_speed, (u32)(ddrphy_clk / 1000));
/* max 10% frequency delta */
- ddr_clk = abs(ddrphy_clk - mem_speed * 1000 * 1000);
- if (ddr_clk > (mem_speed * 1000 * 100)) {
- pr_err("DDR expected freq %d MHz, current is %d MHz\n",
- mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
+ ddr_clk = abs(ddrphy_clk - mem_speed * 1000);
+ if (ddr_clk > (mem_speed * 100)) {
+ pr_err("DDR expected freq %d kHz, current is %d kHz\n",
+ mem_speed, (u32)(ddrphy_clk / 1000));
return -EINVAL;
}
debug("%s: %s[0x%x] = %d\n", __func__,
param[idx].name, param[idx].size, ret);
if (ret) {
- pr_err("%s: Cannot read %s\n",
- __func__, param[idx].name);
+ pr_err("%s: Cannot read %s, error=%d\n",
+ __func__, param[idx].name, ret);
return -EINVAL;
}
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+#include <common.h>
+#include <console.h>
+#include <asm/io.h>
+#include <linux/log2.h>
+#include "stm32mp1_tests.h"
+
+#define ADDR_INVALID 0xFFFFFFFF
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int get_bufsize(char *string, int argc, char *argv[], int arg_nb,
+ size_t *bufsize, size_t default_size)
+{
+ unsigned long value;
+
+ if (argc > arg_nb) {
+ if (strict_strtoul(argv[arg_nb], 0, &value) < 0) {
+ sprintf(string, "invalid %d parameter %s",
+ arg_nb, argv[arg_nb]);
+ return -1;
+ }
+ if (value > STM32_DDR_SIZE || value == 0) {
+ sprintf(string, "invalid size %s", argv[arg_nb]);
+ return -1;
+ }
+ if (value & 0x3) {
+ sprintf(string, "unaligned size %s",
+ argv[arg_nb]);
+ return -1;
+ }
+ *bufsize = value;
+ } else {
+ if (default_size != STM32_DDR_SIZE)
+ *bufsize = default_size;
+ else
+ *bufsize = get_ram_size((long *)STM32_DDR_BASE,
+ STM32_DDR_SIZE);
+ }
+ return 0;
+}
+
+static int get_nb_loop(char *string, int argc, char *argv[], int arg_nb,
+ u32 *nb_loop, u32 default_nb_loop)
+{
+ unsigned long value;
+
+ if (argc > arg_nb) {
+ if (strict_strtoul(argv[arg_nb], 0, &value) < 0) {
+ sprintf(string, "invalid %d parameter %s",
+ arg_nb, argv[arg_nb]);
+ return -1;
+ }
+ if (value == 0)
+ printf("WARNING: infinite loop requested\n");
+ *nb_loop = value;
+ } else {
+ *nb_loop = default_nb_loop;
+ }
+
+ return 0;
+}
+
+static int get_addr(char *string, int argc, char *argv[], int arg_nb,
+ u32 *addr)
+{
+ unsigned long value;
+
+ if (argc > arg_nb) {
+ if (strict_strtoul(argv[arg_nb], 16, &value) < 0) {
+ sprintf(string, "invalid %d parameter %s",
+ arg_nb, argv[arg_nb]);
+ return -1;
+ }
+ if (value < STM32_DDR_BASE) {
+ sprintf(string, "too low address %s", argv[arg_nb]);
+ return -1;
+ }
+ if (value & 0x3 && value != ADDR_INVALID) {
+ sprintf(string, "unaligned address %s",
+ argv[arg_nb]);
+ return -1;
+ }
+ *addr = value;
+ } else {
+ *addr = STM32_DDR_BASE;
+ }
+
+ return 0;
+}
+
+static int get_pattern(char *string, int argc, char *argv[], int arg_nb,
+ u32 *pattern, u32 default_pattern)
+{
+ unsigned long value;
+
+ if (argc > arg_nb) {
+ if (strict_strtoul(argv[arg_nb], 16, &value) < 0) {
+ sprintf(string, "invalid %d parameter %s",
+ arg_nb, argv[arg_nb]);
+ return -1;
+ }
+ *pattern = value;
+ } else {
+ *pattern = default_pattern;
+ }
+
+ return 0;
+}
+
+static u32 check_addr(u32 addr, u32 value)
+{
+ u32 data = readl(addr);
+
+ if (value != data) {
+ printf("0x%08x: 0x%08x <=> 0x%08x", addr, data, value);
+ data = readl(addr);
+ printf("(2nd read: 0x%08x)", data);
+ if (value == data)
+ printf("- read error");
+ else
+ printf("- write error");
+ printf("\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int progress(u32 offset)
+{
+ if (!(offset & 0xFFFFFF)) {
+ putc('.');
+ if (ctrlc()) {
+ printf("\ntest interrupted!\n");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int test_loop_end(u32 *loop, u32 nb_loop, u32 progress)
+{
+ (*loop)++;
+ if (nb_loop && *loop >= nb_loop)
+ return 1;
+ if ((*loop) % progress)
+ return 0;
+ /* allow to interrupt the test only for progress step */
+ if (ctrlc()) {
+ printf("test interrupted!\n");
+ return 1;
+ }
+ printf("loop #%d\n", *loop);
+ return 0;
+}
+
+/**********************************************************************
+ *
+ * Function: memTestDataBus()
+ *
+ * Description: Test the data bus wiring in a memory region by
+ * performing a walking 1's test at a fixed address
+ * within that region. The address is selected
+ * by the caller.
+ *
+ * Notes:
+ *
+ * Returns: 0 if the test succeeds.
+ * A non-zero result is the first pattern that failed.
+ *
+ **********************************************************************/
+static u32 databus(u32 *address)
+{
+ u32 pattern;
+ u32 read_value;
+
+ /* Perform a walking 1's test at the given address. */
+ for (pattern = 1; pattern != 0; pattern <<= 1) {
+ /* Write the test pattern. */
+ writel(pattern, address);
+
+ /* Read it back (immediately is okay for this test). */
+ read_value = readl(address);
+ debug("%x: %x <=> %x\n",
+ (u32)address, read_value, pattern);
+
+ if (read_value != pattern)
+ return pattern;
+ }
+
+ return 0;
+}
+
+/**********************************************************************
+ *
+ * Function: memTestAddressBus()
+ *
+ * Description: Test the address bus wiring in a memory region by
+ * performing a walking 1's test on the relevant bits
+ * of the address and checking for aliasing. This test
+ * will find single-bit address failures such as stuck
+ * -high, stuck-low, and shorted pins. The base address
+ * and size of the region are selected by the caller.
+ *
+ * Notes: For best results, the selected base address should
+ * have enough LSB 0's to guarantee single address bit
+ * changes. For example, to test a 64-Kbyte region,
+ * select a base address on a 64-Kbyte boundary. Also,
+ * select the region size as a power-of-two--if at all
+ * possible.
+ *
+ * Returns: NULL if the test succeeds.
+ * A non-zero result is the first address at which an
+ * aliasing problem was uncovered. By examining the
+ * contents of memory, it may be possible to gather
+ * additional information about the problem.
+ *
+ **********************************************************************/
+static u32 *addressbus(u32 *address, u32 nb_bytes)
+{
+ u32 mask = (nb_bytes / sizeof(u32) - 1);
+ u32 offset;
+ u32 test_offset;
+ u32 read_value;
+
+ u32 pattern = 0xAAAAAAAA;
+ u32 antipattern = 0x55555555;
+
+ /* Write the default pattern at each of the power-of-two offsets. */
+ for (offset = 1; (offset & mask) != 0; offset <<= 1)
+ writel(pattern, &address[offset]);
+
+ /* Check for address bits stuck high. */
+ test_offset = 0;
+ writel(antipattern, &address[test_offset]);
+
+ for (offset = 1; (offset & mask) != 0; offset <<= 1) {
+ read_value = readl(&address[offset]);
+ debug("%x: %x <=> %x\n",
+ (u32)&address[offset], read_value, pattern);
+ if (read_value != pattern)
+ return &address[offset];
+ }
+
+ writel(pattern, &address[test_offset]);
+
+ /* Check for address bits stuck low or shorted. */
+ for (test_offset = 1; (test_offset & mask) != 0; test_offset <<= 1) {
+ writel(antipattern, &address[test_offset]);
+ if (readl(&address[0]) != pattern)
+ return &address[test_offset];
+
+ for (offset = 1; (offset & mask) != 0; offset <<= 1) {
+ if (readl(&address[offset]) != pattern &&
+ offset != test_offset)
+ return &address[test_offset];
+ }
+ writel(pattern, &address[test_offset]);
+ }
+
+ return NULL;
+}
+
+/**********************************************************************
+ *
+ * Function: memTestDevice()
+ *
+ * Description: Test the integrity of a physical memory device by
+ * performing an increment/decrement test over the
+ * entire region. In the process every storage bit
+ * in the device is tested as a zero and a one. The
+ * base address and the size of the region are
+ * selected by the caller.
+ *
+ * Notes:
+ *
+ * Returns: NULL if the test succeeds.
+ *
+ * A non-zero result is the first address at which an
+ * incorrect value was read back. By examining the
+ * contents of memory, it may be possible to gather
+ * additional information about the problem.
+ *
+ **********************************************************************/
+static u32 *memdevice(u32 *address, u32 nb_bytes)
+{
+ u32 offset;
+ u32 nb_words = nb_bytes / sizeof(u32);
+
+ u32 pattern;
+ u32 antipattern;
+
+ puts("Fill with pattern");
+ /* Fill memory with a known pattern. */
+ for (pattern = 1, offset = 0; offset < nb_words; pattern++, offset++) {
+ writel(pattern, &address[offset]);
+ if (progress(offset))
+ return NULL;
+ }
+
+ puts("\nCheck and invert pattern");
+ /* Check each location and invert it for the second pass. */
+ for (pattern = 1, offset = 0; offset < nb_words; pattern++, offset++) {
+ if (readl(&address[offset]) != pattern)
+ return &address[offset];
+
+ antipattern = ~pattern;
+ writel(antipattern, &address[offset]);
+ if (progress(offset))
+ return NULL;
+ }
+
+ puts("\nCheck inverted pattern");
+ /* Check each location for the inverted pattern and zero it. */
+ for (pattern = 1, offset = 0; offset < nb_words; pattern++, offset++) {
+ antipattern = ~pattern;
+ if (readl(&address[offset]) != antipattern)
+ return &address[offset];
+ if (progress(offset))
+ return NULL;
+ }
+ printf("\n");
+
+ return NULL;
+}
+
+static enum test_result databuswalk0(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ int i;
+ u32 loop = 0, nb_loop;
+ u32 addr;
+ u32 error = 0;
+ u32 data;
+
+ if (get_nb_loop(string, argc, argv, 0, &nb_loop, 100))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 1, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%x\n", nb_loop, addr);
+ while (!error) {
+ for (i = 0; i < 32; i++)
+ writel(~(1 << i), addr + 4 * i);
+ for (i = 0; i < 32; i++) {
+ data = readl(addr + 4 * i);
+ if (~(1 << i) != data) {
+ error |= 1 << i;
+ debug("%x: error %x expected %x => error:%x\n",
+ addr + 4 * i, data, ~(1 << i), error);
+ }
+ }
+ if (test_loop_end(&loop, nb_loop, 1000))
+ break;
+ for (i = 0; i < 32; i++)
+ writel(0, addr + 4 * i);
+ }
+ if (error) {
+ sprintf(string, "loop %d: error for bits 0x%x",
+ loop, error);
+ return TEST_FAILED;
+ }
+ sprintf(string, "no error for %d loops", loop);
+ return TEST_PASSED;
+}
+
+static enum test_result databuswalk1(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ int i;
+ u32 loop = 0, nb_loop;
+ u32 addr;
+ u32 error = 0;
+ u32 data;
+
+ if (get_nb_loop(string, argc, argv, 0, &nb_loop, 100))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 1, &addr))
+ return TEST_ERROR;
+ printf("running %d loops at 0x%x\n", nb_loop, addr);
+ while (!error) {
+ for (i = 0; i < 32; i++)
+ writel(1 << i, addr + 4 * i);
+ for (i = 0; i < 32; i++) {
+ data = readl(addr + 4 * i);
+ if ((1 << i) != data) {
+ error |= 1 << i;
+ debug("%x: error %x expected %x => error:%x\n",
+ addr + 4 * i, data, (1 << i), error);
+ }
+ }
+ if (test_loop_end(&loop, nb_loop, 1000))
+ break;
+ for (i = 0; i < 32; i++)
+ writel(0, addr + 4 * i);
+ }
+ if (error) {
+ sprintf(string, "loop %d: error for bits 0x%x",
+ loop, error);
+ return TEST_FAILED;
+ }
+ sprintf(string, "no error for %d loops", loop);
+ return TEST_PASSED;
+}
+
+static enum test_result test_databus(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 addr;
+ u32 error;
+
+ if (get_addr(string, argc, argv, 0, &addr))
+ return TEST_ERROR;
+ error = databus((u32 *)addr);
+ if (error) {
+ sprintf(string, "0x%x: error for bits 0x%x",
+ addr, error);
+ return TEST_FAILED;
+ }
+ sprintf(string, "address 0x%x", addr);
+ return TEST_PASSED;
+}
+
+static enum test_result test_addressbus(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 addr;
+ u32 bufsize;
+ u32 error;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (!is_power_of_2(bufsize)) {
+ sprintf(string, "size 0x%x is not a power of 2",
+ (u32)bufsize);
+ return TEST_ERROR;
+ }
+ if (get_addr(string, argc, argv, 1, &addr))
+ return TEST_ERROR;
+
+ error = (u32)addressbus((u32 *)addr, bufsize);
+ if (error) {
+ sprintf(string, "0x%x: error for address 0x%x",
+ addr, error);
+ return TEST_FAILED;
+ }
+ sprintf(string, "address 0x%x, size 0x%x",
+ addr, bufsize);
+ return TEST_PASSED;
+}
+
+static enum test_result test_memdevice(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 addr;
+ size_t bufsize;
+ u32 error;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 1, &addr))
+ return TEST_ERROR;
+ error = (u32)memdevice((u32 *)addr, (unsigned long)bufsize);
+ if (error) {
+ sprintf(string, "0x%x: error for address 0x%x",
+ addr, error);
+ return TEST_FAILED;
+ }
+ sprintf(string, "address 0x%x, size 0x%x",
+ addr, bufsize);
+ return TEST_PASSED;
+}
+
+/**********************************************************************
+ *
+ * Function: sso
+ *
+ * Description: Test the Simultaneous Switching Output.
+ * Verifies succes sive reads and writes to the same memory word,
+ * holding one bit constant while toggling all other data bits
+ * simultaneously
+ * => stress the data bus over an address range
+ *
+ * The CPU writes to each address in the given range.
+ * For each bit, first the CPU holds the bit at 1 while
+ * toggling the other bits, and then the CPU holds the bit at 0
+ * while toggling the other bits.
+ * After each write, the CPU reads the address that was written
+ * to verify that it contains the correct data
+ *
+ **********************************************************************/
+static enum test_result test_sso(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ int i, j;
+ u32 addr, bufsize, remaining, offset;
+ u32 error = 0;
+ u32 data;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 1, &addr))
+ return TEST_ERROR;
+
+ printf("running sso at 0x%x length 0x%x", addr, bufsize);
+ offset = addr;
+ remaining = bufsize;
+ while (remaining) {
+ for (i = 0; i < 32; i++) {
+ /* write pattern. */
+ for (j = 0; j < 6; j++) {
+ switch (j) {
+ case 0:
+ case 2:
+ data = 1 << i;
+ break;
+ case 3:
+ case 5:
+ data = ~(1 << i);
+ break;
+ case 1:
+ data = ~0x0;
+ break;
+ case 4:
+ data = 0x0;
+ break;
+ }
+
+ writel(data, offset);
+ error = check_addr(offset, data);
+ if (error)
+ goto end;
+ }
+ }
+ offset += 4;
+ remaining -= 4;
+ if (progress(offset << 7))
+ goto end;
+ }
+ puts("\n");
+
+end:
+ if (error) {
+ sprintf(string, "error for pattern 0x%x @0x%x",
+ data, offset);
+ return TEST_FAILED;
+ }
+ sprintf(string, "no error for sso at 0x%x length 0x%x", addr, bufsize);
+ return TEST_PASSED;
+}
+
+/**********************************************************************
+ *
+ * Function: Random
+ *
+ * Description: Verifies r/w with pseudo-ramdom value on one region
+ * + write the region (individual access)
+ * + memcopy to the 2nd region (try to use burst)
+ * + verify the 2 regions
+ *
+ **********************************************************************/
+static enum test_result test_random(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 addr, offset, value = 0;
+ size_t bufsize;
+ u32 loop = 0, nb_loop;
+ u32 error = 0;
+ unsigned int seed;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%x\n", nb_loop, addr);
+ while (!error) {
+ seed = rand();
+ for (offset = addr; offset < addr + bufsize; offset += 4)
+ writel(rand(), offset);
+
+ memcpy((void *)addr + bufsize, (void *)addr, bufsize);
+
+ srand(seed);
+ for (offset = addr; offset < addr + 2 * bufsize; offset += 4) {
+ if (offset == (addr + bufsize))
+ srand(seed);
+ value = rand();
+ error = check_addr(offset, value);
+ if (error)
+ break;
+ if (progress(offset))
+ return TEST_FAILED;
+ }
+ if (test_loop_end(&loop, nb_loop, 100))
+ break;
+ }
+
+ if (error) {
+ sprintf(string,
+ "loop %d: error for address 0x%x: 0x%x expected 0x%x",
+ loop, offset, readl(offset), value);
+ return TEST_FAILED;
+ }
+ sprintf(string, "no error for %d loops, size 0x%x",
+ loop, bufsize);
+ return TEST_PASSED;
+}
+
+/**********************************************************************
+ *
+ * Function: noise
+ *
+ * Description: Verifies r/w while forcing switching of all data bus lines.
+ * optimised 4 iteration write/read/write/read cycles...
+ * for pattern and inversed pattern
+ *
+ **********************************************************************/
+void do_noise(u32 addr, u32 pattern, u32 *result)
+{
+ __asm__("push {R0-R11}");
+ __asm__("mov r0, %0" : : "r" (addr));
+ __asm__("mov r1, %0" : : "r" (pattern));
+ __asm__("mov r11, %0" : : "r" (result));
+
+ __asm__("mvn r2, r1");
+
+ __asm__("str r1, [r0]");
+ __asm__("ldr r3, [r0]");
+ __asm__("str r2, [r0]");
+ __asm__("ldr r4, [r0]");
+
+ __asm__("str r1, [r0]");
+ __asm__("ldr r5, [r0]");
+ __asm__("str r2, [r0]");
+ __asm__("ldr r6, [r0]");
+
+ __asm__("str r1, [r0]");
+ __asm__("ldr r7, [r0]");
+ __asm__("str r2, [r0]");
+ __asm__("ldr r8, [r0]");
+
+ __asm__("str r1, [r0]");
+ __asm__("ldr r9, [r0]");
+ __asm__("str r2, [r0]");
+ __asm__("ldr r10, [r0]");
+
+ __asm__("stmia R11!, {R3-R10}");
+
+ __asm__("pop {R0-R11}");
+}
+
+static enum test_result test_noise(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 addr, pattern;
+ u32 result[8];
+ int i;
+ enum test_result res = TEST_PASSED;
+
+ if (get_pattern(string, argc, argv, 0, &pattern, 0xFFFFFFFF))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 1, &addr))
+ return TEST_ERROR;
+
+ printf("running noise for 0x%x at 0x%x\n", pattern, addr);
+
+ do_noise(addr, pattern, result);
+
+ for (i = 0; i < 0x8;) {
+ if (check_addr((u32)&result[i++], pattern))
+ res = TEST_FAILED;
+ if (check_addr((u32)&result[i++], ~pattern))
+ res = TEST_FAILED;
+ }
+
+ return res;
+}
+
+/**********************************************************************
+ *
+ * Function: noise_burst
+ *
+ * Description: Verifies r/w while forcing switching of all data bus lines.
+ * optimised write loop witrh store multiple to use burst
+ * for pattern and inversed pattern
+ *
+ **********************************************************************/
+void do_noise_burst(u32 addr, u32 pattern, size_t bufsize)
+{
+ __asm__("push {R0-R9}");
+ __asm__("mov r0, %0" : : "r" (addr));
+ __asm__("mov r1, %0" : : "r" (pattern));
+ __asm__("mov r9, %0" : : "r" (bufsize));
+
+ __asm__("mvn r2, r1");
+ __asm__("mov r3, r1");
+ __asm__("mov r4, r2");
+ __asm__("mov r5, r1");
+ __asm__("mov r6, r2");
+ __asm__("mov r7, r1");
+ __asm__("mov r8, r2");
+
+ __asm__("loop1:");
+ __asm__("stmia R0!, {R1-R8}");
+ __asm__("stmia R0!, {R1-R8}");
+ __asm__("stmia R0!, {R1-R8}");
+ __asm__("stmia R0!, {R1-R8}");
+ __asm__("subs r9, r9, #128");
+ __asm__("bge loop1");
+ __asm__("pop {R0-R9}");
+}
+
+/* chunk size enough to allow interruption with Ctrl-C*/
+#define CHUNK_SIZE 0x8000000
+static enum test_result test_noise_burst(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 addr, offset, pattern;
+ size_t bufsize, remaining, size;
+ int i;
+ enum test_result res = TEST_PASSED;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_pattern(string, argc, argv, 1, &pattern, 0xFFFFFFFF))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running noise burst for 0x%x at 0x%x + 0x%x",
+ pattern, addr, bufsize);
+
+ offset = addr;
+ remaining = bufsize;
+ size = CHUNK_SIZE;
+ while (remaining) {
+ if (remaining < size)
+ size = remaining;
+ do_noise_burst(offset, pattern, size);
+ remaining -= size;
+ offset += size;
+ if (progress(offset)) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ }
+ puts("\ncheck buffer");
+ for (i = 0; i < bufsize;) {
+ if (check_addr(addr + i, pattern))
+ res = TEST_FAILED;
+ i += 4;
+ if (check_addr(addr + i, ~pattern))
+ res = TEST_FAILED;
+ i += 4;
+ if (progress(i)) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ }
+end:
+ puts("\n");
+ return res;
+}
+
+/**********************************************************************
+ *
+ * Function: pattern test
+ *
+ * Description: optimized loop for read/write pattern (array of 8 u32)
+ *
+ **********************************************************************/
+#define PATTERN_SIZE 8
+static enum test_result test_loop(const u32 *pattern, u32 *address,
+ const u32 bufsize)
+{
+ int i;
+ int j;
+ enum test_result res = TEST_PASSED;
+ u32 *offset, testsize, remaining;
+
+ offset = address;
+ remaining = bufsize;
+ while (remaining) {
+ testsize = bufsize > 0x1000000 ? 0x1000000 : bufsize;
+
+ __asm__("push {R0-R10}");
+ __asm__("mov r0, %0" : : "r" (pattern));
+ __asm__("mov r1, %0" : : "r" (offset));
+ __asm__("mov r2, %0" : : "r" (testsize));
+ __asm__("ldmia r0!, {R3-R10}");
+
+ __asm__("loop2:");
+ __asm__("stmia r1!, {R3-R10}");
+ __asm__("stmia r1!, {R3-R10}");
+ __asm__("stmia r1!, {R3-R10}");
+ __asm__("stmia r1!, {R3-R10}");
+ __asm__("subs r2, r2, #8");
+ __asm__("bge loop2");
+ __asm__("pop {R0-R10}");
+
+ offset += testsize;
+ remaining -= testsize;
+ if (progress((u32)offset)) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ }
+
+ puts("\ncheck buffer");
+ for (i = 0; i < bufsize; i += PATTERN_SIZE * 4) {
+ for (j = 0; j < PATTERN_SIZE; j++, address++)
+ if (check_addr((u32)address, pattern[j])) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ if (progress(i)) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ }
+
+end:
+ puts("\n");
+ return res;
+}
+
+const u32 pattern_div1_x16[PATTERN_SIZE] = {
+ 0x0000FFFF, 0x0000FFFF, 0x0000FFFF, 0x0000FFFF,
+ 0x0000FFFF, 0x0000FFFF, 0x0000FFFF, 0x0000FFFF
+};
+
+const u32 pattern_div2_x16[PATTERN_SIZE] = {
+ 0xFFFFFFFF, 0x00000000, 0xFFFFFFFF, 0x00000000,
+ 0xFFFFFFFF, 0x00000000, 0xFFFFFFFF, 0x00000000
+};
+
+const u32 pattern_div4_x16[PATTERN_SIZE] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000
+};
+
+const u32 pattern_div4_x32[PATTERN_SIZE] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000
+};
+
+const u32 pattern_mostly_zero_x16[PATTERN_SIZE] = {
+ 0x00000000, 0x00000000, 0x00000000, 0x0000FFFF,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000
+};
+
+const u32 pattern_mostly_zero_x32[PATTERN_SIZE] = {
+ 0x00000000, 0x00000000, 0x00000000, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000
+};
+
+const u32 pattern_mostly_one_x16[PATTERN_SIZE] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x0000FFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF
+};
+
+const u32 pattern_mostly_one_x32[PATTERN_SIZE] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF
+};
+
+#define NB_PATTERN 5
+static enum test_result test_freq_pattern(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ const u32 * const patterns_x16[NB_PATTERN] = {
+ pattern_div1_x16,
+ pattern_div2_x16,
+ pattern_div4_x16,
+ pattern_mostly_zero_x16,
+ pattern_mostly_one_x16,
+ };
+ const u32 * const patterns_x32[NB_PATTERN] = {
+ pattern_div2_x16,
+ pattern_div4_x16,
+ pattern_div4_x32,
+ pattern_mostly_zero_x32,
+ pattern_mostly_one_x32
+ };
+ const char *patterns_comments[NB_PATTERN] = {
+ "switching at frequency F/1",
+ "switching at frequency F/2",
+ "switching at frequency F/4",
+ "mostly zero",
+ "mostly one"
+ };
+
+ enum test_result res = TEST_PASSED, pattern_res;
+ int i, bus_width;
+ const u32 **patterns;
+ u32 bufsize;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+
+ switch (readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK) {
+ case DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF:
+ case DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER:
+ bus_width = 16;
+ break;
+ default:
+ bus_width = 32;
+ break;
+ }
+
+ printf("running test pattern at 0x%08x length 0x%x width = %d\n",
+ STM32_DDR_BASE, bufsize, bus_width);
+
+ patterns =
+ (const u32 **)(bus_width == 16 ? patterns_x16 : patterns_x32);
+
+ for (i = 0; i < NB_PATTERN; i++) {
+ printf("test data pattern %s:", patterns_comments[i]);
+ pattern_res = test_loop(patterns[i], (u32 *)STM32_DDR_BASE,
+ bufsize);
+ if (pattern_res != TEST_PASSED) {
+ printf("Failed\n");
+ return pattern_res;
+ }
+ printf("Passed\n");
+ }
+
+ return res;
+}
+
+/**********************************************************************
+ *
+ * Function: pattern test with size
+ *
+ * Description: loop for write pattern
+ *
+ **********************************************************************/
+
+static enum test_result test_loop_size(const u32 *pattern, u32 size,
+ u32 *address,
+ const u32 bufsize)
+{
+ int i, j;
+ enum test_result res = TEST_PASSED;
+ u32 *p = address;
+
+ for (i = 0; i < bufsize; i += size * 4) {
+ for (j = 0; j < size ; j++, p++)
+ *p = pattern[j];
+ if (progress(i)) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ }
+
+ puts("\ncheck buffer");
+ p = address;
+ for (i = 0; i < bufsize; i += size * 4) {
+ for (j = 0; j < size; j++, p++)
+ if (check_addr((u32)p, pattern[j])) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ if (progress(i)) {
+ res = TEST_FAILED;
+ goto end;
+ }
+ }
+
+end:
+ puts("\n");
+ return res;
+}
+
+static enum test_result test_checkboard(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED;
+ u32 bufsize, nb_loop, loop = 0, addr;
+ int i;
+
+ u32 checkboard[2] = {0x55555555, 0xAAAAAAAA};
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%08x length 0x%x\n",
+ nb_loop, addr, bufsize);
+ while (1) {
+ for (i = 0; i < 2; i++) {
+ res = test_loop_size(checkboard, 2, (u32 *)addr,
+ bufsize);
+ if (res)
+ return res;
+ checkboard[0] = ~checkboard[0];
+ checkboard[1] = ~checkboard[1];
+ }
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ sprintf(string, "no error for %d loops at 0x%08x length 0x%x",
+ loop, addr, bufsize);
+
+ return res;
+}
+
+static enum test_result test_blockseq(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED;
+ u32 bufsize, nb_loop, loop = 0, addr, value;
+ int i;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%08x length 0x%x\n",
+ nb_loop, addr, bufsize);
+ while (1) {
+ for (i = 0; i < 256; i++) {
+ value = i | i << 8 | i << 16 | i << 24;
+ printf("pattern = %08x", value);
+ res = test_loop_size(&value, 1, (u32 *)addr, bufsize);
+ if (res != TEST_PASSED)
+ return res;
+ }
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ sprintf(string, "no error for %d loops at 0x%08x length 0x%x",
+ loop, addr, bufsize);
+
+ return res;
+}
+
+static enum test_result test_walkbit0(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED;
+ u32 bufsize, nb_loop, loop = 0, addr, value;
+ int i;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%08x length 0x%x\n",
+ nb_loop, addr, bufsize);
+ while (1) {
+ for (i = 0; i < 64; i++) {
+ if (i < 32)
+ value = 1 << i;
+ else
+ value = 1 << (63 - i);
+
+ printf("pattern = %08x", value);
+ res = test_loop_size(&value, 1, (u32 *)addr, bufsize);
+ if (res != TEST_PASSED)
+ return res;
+ }
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ sprintf(string, "no error for %d loops at 0x%08x length 0x%x",
+ loop, addr, bufsize);
+
+ return res;
+}
+
+static enum test_result test_walkbit1(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED;
+ u32 bufsize, nb_loop, loop = 0, addr, value;
+ int i;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%08x length 0x%x\n",
+ nb_loop, addr, bufsize);
+ while (1) {
+ for (i = 0; i < 64; i++) {
+ if (i < 32)
+ value = ~(1 << i);
+ else
+ value = ~(1 << (63 - i));
+
+ printf("pattern = %08x", value);
+ res = test_loop_size(&value, 1, (u32 *)addr, bufsize);
+ if (res != TEST_PASSED)
+ return res;
+ }
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ sprintf(string, "no error for %d loops at 0x%08x length 0x%x",
+ loop, addr, bufsize);
+
+ return res;
+}
+
+/*
+ * try to catch bad bits which are dependent on the current values of
+ * surrounding bits in either the same word32
+ */
+static enum test_result test_bitspread(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED;
+ u32 bufsize, nb_loop, loop = 0, addr, bitspread[4];
+ int i, j;
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%08x length 0x%x\n",
+ nb_loop, addr, bufsize);
+ while (1) {
+ for (i = 1; i < 32; i++) {
+ for (j = 0; j < i; j++) {
+ if (i < 32)
+ bitspread[0] = (1 << i) | (1 << j);
+ else
+ bitspread[0] = (1 << (63 - i)) |
+ (1 << (63 - j));
+ bitspread[1] = bitspread[0];
+ bitspread[2] = ~bitspread[0];
+ bitspread[3] = ~bitspread[0];
+ printf("pattern = %08x", bitspread[0]);
+
+ res = test_loop_size(bitspread, 4, (u32 *)addr,
+ bufsize);
+ if (res != TEST_PASSED)
+ return res;
+ }
+ }
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ sprintf(string, "no error for %d loops at 0x%08x length 0x%x",
+ loop, addr, bufsize);
+
+ return res;
+}
+
+static enum test_result test_bitflip(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED;
+ u32 bufsize, nb_loop, loop = 0, addr;
+ int i;
+
+ u32 bitflip[4];
+
+ if (get_bufsize(string, argc, argv, 0, &bufsize, 4 * 1024))
+ return TEST_ERROR;
+ if (get_nb_loop(string, argc, argv, 1, &nb_loop, 1))
+ return TEST_ERROR;
+ if (get_addr(string, argc, argv, 2, &addr))
+ return TEST_ERROR;
+
+ printf("running %d loops at 0x%08x length 0x%x\n",
+ nb_loop, addr, bufsize);
+ while (1) {
+ for (i = 0; i < 32; i++) {
+ bitflip[0] = 1 << i;
+ bitflip[1] = bitflip[0];
+ bitflip[2] = ~bitflip[0];
+ bitflip[3] = bitflip[2];
+ printf("pattern = %08x", bitflip[0]);
+
+ res = test_loop_size(bitflip, 4, (u32 *)addr, bufsize);
+ if (res != TEST_PASSED)
+ return res;
+ }
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ sprintf(string, "no error for %d loops at 0x%08x length 0x%x",
+ loop, addr, bufsize);
+
+ return res;
+}
+
+/**********************************************************************
+ *
+ * Function: infinite read access to DDR
+ *
+ * Description: continuous read the same pattern at the same address
+ *
+ **********************************************************************/
+static enum test_result test_read(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 *addr;
+ u32 data;
+ u32 loop = 0;
+ bool random = false;
+
+ if (get_addr(string, argc, argv, 0, (u32 *)&addr))
+ return TEST_ERROR;
+
+ if ((u32)addr == ADDR_INVALID) {
+ printf("random ");
+ random = true;
+ }
+
+ printf("running at 0x%08x\n", (u32)addr);
+
+ while (1) {
+ if (random)
+ addr = (u32 *)(STM32_DDR_BASE +
+ (rand() & (STM32_DDR_SIZE - 1) & ~0x3));
+ data = readl(addr);
+ if (test_loop_end(&loop, 0, 1000))
+ break;
+ }
+ sprintf(string, "0x%x: %x", (u32)addr, data);
+
+ return TEST_PASSED;
+}
+
+/**********************************************************************
+ *
+ * Function: infinite write access to DDR
+ *
+ * Description: continuous write the same pattern at the same address
+ *
+ **********************************************************************/
+static enum test_result test_write(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 *addr;
+ u32 data = 0xA5A5AA55;
+ u32 loop = 0;
+ bool random = false;
+
+ if (get_addr(string, argc, argv, 0, (u32 *)&addr))
+ return TEST_ERROR;
+
+ if ((u32)addr == ADDR_INVALID) {
+ printf("random ");
+ random = true;
+ }
+
+ printf("running at 0x%08x\n", (u32)addr);
+
+ while (1) {
+ if (random) {
+ addr = (u32 *)(STM32_DDR_BASE +
+ (rand() & (STM32_DDR_SIZE - 1) & ~0x3));
+ data = rand();
+ }
+ writel(data, addr);
+ if (test_loop_end(&loop, 0, 1000))
+ break;
+ }
+ sprintf(string, "0x%x: %x", (u32)addr, data);
+
+ return TEST_PASSED;
+}
+
+#define NB_TEST_INFINITE 2
+static enum test_result test_all(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ enum test_result res = TEST_PASSED, result;
+ int i, nb_error = 0;
+ u32 loop = 0, nb_loop;
+
+ if (get_nb_loop(string, argc, argv, 0, &nb_loop, 1))
+ return TEST_ERROR;
+
+ while (!nb_error) {
+ /* execute all the test except the lasts which are infinite */
+ for (i = 1; i < test_nb - NB_TEST_INFINITE; i++) {
+ printf("execute %d:%s\n", (int)i, test[i].name);
+ result = test[i].fct(ctl, phy, string, 0, NULL);
+ printf("result %d:%s = ", (int)i, test[i].name);
+ if (result != TEST_PASSED) {
+ nb_error++;
+ res = TEST_FAILED;
+ puts("Failed");
+ } else {
+ puts("Passed");
+ }
+ puts("\n\n");
+ }
+ printf("loop %d: %d/%d test failed\n\n\n",
+ loop + 1, nb_error, test_nb - NB_TEST_INFINITE);
+ if (test_loop_end(&loop, nb_loop, 1))
+ break;
+ }
+ if (res != TEST_PASSED) {
+ sprintf(string, "loop %d: %d/%d test failed", loop, nb_error,
+ test_nb - NB_TEST_INFINITE);
+ } else {
+ sprintf(string, "loop %d: %d tests passed", loop,
+ test_nb - NB_TEST_INFINITE);
+ }
+ return res;
+}
+
+/****************************************************************
+ * TEST Description
+ ****************************************************************/
+
+const struct test_desc test[] = {
+ {test_all, "All", "[loop]", "Execute all tests", 1 },
+ {test_databus, "Simple DataBus", "[addr]",
+ "Verifies each data line by walking 1 on fixed address",
+ 1
+ },
+ {databuswalk0, "DataBusWalking0", "[loop] [addr]",
+ "Verifies each data bus signal can be driven low (32 word burst)",
+ 2
+ },
+ {databuswalk1, "DataBusWalking1", "[loop] [addr]",
+ "Verifies each data bus signal can be driven high (32 word burst)",
+ 2
+ },
+ {test_addressbus, "AddressBus", "[size] [addr]",
+ "Verifies each relevant bits of the address and checking for aliasing",
+ 2
+ },
+ {test_memdevice, "MemDevice", "[size] [addr]",
+ "Test the integrity of a physical memory (test every storage bit in the region)",
+ 2
+ },
+ {test_sso, "SimultaneousSwitchingOutput", "[size] [addr] ",
+ "Stress the data bus over an address range",
+ 2
+ },
+ {test_noise, "Noise", "[pattern] [addr]",
+ "Verifies r/w while forcing switching of all data bus lines.",
+ 3
+ },
+ {test_noise_burst, "NoiseBurst", "[size] [pattern] [addr]",
+ "burst transfers while forcing switching of the data bus lines",
+ 3
+ },
+ {test_random, "Random", "[size] [loop] [addr]",
+ "Verifies r/w and memcopy(burst for pseudo random value.",
+ 3
+ },
+ {test_freq_pattern, "FrequencySelectivePattern ", "[size]",
+ "write & test patterns: Mostly Zero, Mostly One and F/n",
+ 1
+ },
+ {test_blockseq, "BlockSequential", "[size] [loop] [addr]",
+ "test incremental pattern",
+ 3
+ },
+ {test_checkboard, "Checkerboard", "[size] [loop] [addr]",
+ "test checker pattern",
+ 3
+ },
+ {test_bitspread, "BitSpread", "[size] [loop] [addr]",
+ "test Bit Spread pattern",
+ 3
+ },
+ {test_bitflip, "BitFlip", "[size] [loop] [addr]",
+ "test Bit Flip pattern",
+ 3
+ },
+ {test_walkbit0, "WalkingOnes", "[size] [loop] [addr]",
+ "test Walking Ones pattern",
+ 3
+ },
+ {test_walkbit1, "WalkingZeroes", "[size] [loop] [addr]",
+ "test Walking Zeroes pattern",
+ 3
+ },
+ /* need to the the 2 last one (infinite) : skipped for test all */
+ {test_read, "infinite read", "[addr]",
+ "basic test : infinite read access", 1},
+ {test_write, "infinite write", "[addr]",
+ "basic test : infinite write access", 1},
+};
+
+const int test_nb = ARRAY_SIZE(test);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef _RAM_STM32MP1_TESTS_H_
+#define _RAM_STM32MP1_TESTS_H_
+
+#include "stm32mp1_ddr_regs.h"
+
+enum test_result {
+ TEST_PASSED,
+ TEST_FAILED,
+ TEST_ERROR
+};
+
+struct test_desc {
+ enum test_result (*fct)(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string,
+ int argc, char *argv[]);
+ const char *name;
+ const char *usage;
+ const char *help;
+ u8 max_args;
+};
+
+extern const struct test_desc test[];
+extern const int test_nb;
+
+extern const struct test_desc tuning[];
+extern const int tuning_nb;
+
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+#include <common.h>
+#include <console.h>
+#include <clk.h>
+#include <ram.h>
+#include <reset.h>
+#include <asm/io.h>
+
+#include "stm32mp1_ddr_regs.h"
+#include "stm32mp1_ddr.h"
+#include "stm32mp1_tests.h"
+
+#define MAX_DQS_PHASE_IDX _144deg
+#define MAX_DQS_UNIT_IDX 7
+#define MAX_GSL_IDX 5
+#define MAX_GPS_IDX 3
+
+/* Number of bytes used in this SW. ( min 1--> max 4). */
+#define NUM_BYTES 4
+
+enum dqs_phase_enum {
+ _36deg = 0,
+ _54deg = 1,
+ _72deg = 2,
+ _90deg = 3,
+ _108deg = 4,
+ _126deg = 5,
+ _144deg = 6
+};
+
+/* BIST Result struct */
+struct BIST_result {
+ /* Overall test result:
+ * 0 Fail (any bit failed) ,
+ * 1 Success (All bits success)
+ */
+ bool test_result;
+ /* 1: true, all fail / 0: False, not all bits fail */
+ bool all_bits_fail;
+ bool bit_i_test_result[8]; /* 0 fail / 1 success */
+};
+
+/* a struct that defines tuning parameters of a byte. */
+struct tuning_position {
+ u8 phase; /* DQS phase */
+ u8 unit; /* DQS unit delay */
+ u32 bits_delay; /* Bits deskew in this byte */
+};
+
+/* 36deg, 54deg, 72deg, 90deg, 108deg, 126deg, 144deg */
+const u8 dx_dll_phase[7] = {3, 2, 1, 0, 14, 13, 12};
+
+static u8 BIST_error_max = 1;
+static u32 BIST_seed = 0x1234ABCD;
+
+static u8 get_nb_bytes(struct stm32mp1_ddrctl *ctl)
+{
+ u32 data_bus = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK;
+ u8 nb_bytes = NUM_BYTES;
+
+ switch (data_bus) {
+ case DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF:
+ nb_bytes /= 2;
+ break;
+ case DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER:
+ nb_bytes /= 4;
+ break;
+ default:
+ break;
+ }
+
+ return nb_bytes;
+}
+
+static void itm_soft_reset(struct stm32mp1_ddrphy *phy)
+{
+ stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST);
+}
+
+/* Read DQ unit delay register and provides the retrieved value for DQS
+ * We are assuming that we have the same delay when clocking
+ * by DQS and when clocking by DQSN
+ */
+static u8 DQ_unit_index(struct stm32mp1_ddrphy *phy, u8 byte, u8 bit)
+{
+ u32 index;
+ u32 addr = DXNDQTR(phy, byte);
+
+ /* We are assuming that we have the same delay when clocking by DQS
+ * and when clocking by DQSN : use only the low bits
+ */
+ index = (readl(addr) >> DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit))
+ & DDRPHYC_DXNDQTR_DQDLY_LOW_MASK;
+
+ pr_debug("%s: [%x]: %x => DQ unit index = %x\n",
+ __func__, addr, readl(addr), index);
+
+ return index;
+}
+
+/* Sets the DQS phase delay for a byte lane.
+ *phase delay is specified by giving the index of the desired delay
+ * in the dx_dll_phase array.
+ */
+static void DQS_phase_delay(struct stm32mp1_ddrphy *phy, u8 byte, u8 phase_idx)
+{
+ u8 sdphase_val = 0;
+
+ /* Write DXNDLLCR.SDPHASE = dx_dll_phase(phase_index); */
+ sdphase_val = dx_dll_phase[phase_idx];
+ clrsetbits_le32(DXNDLLCR(phy, byte),
+ DDRPHYC_DXNDLLCR_SDPHASE_MASK,
+ sdphase_val << DDRPHYC_DXNDLLCR_SDPHASE_SHIFT);
+}
+
+/* Sets the DQS unit delay for a byte lane.
+ * unit delay is specified by giving the index of the desired delay
+ * for dgsdly and dqsndly (same value).
+ */
+static void DQS_unit_delay(struct stm32mp1_ddrphy *phy,
+ u8 byte, u8 unit_dly_idx)
+{
+ /* Write the same value in DXNDQSTR.DQSDLY and DXNDQSTR.DQSNDLY */
+ clrsetbits_le32(DXNDQSTR(phy, byte),
+ DDRPHYC_DXNDQSTR_DQSDLY_MASK |
+ DDRPHYC_DXNDQSTR_DQSNDLY_MASK,
+ (unit_dly_idx << DDRPHYC_DXNDQSTR_DQSDLY_SHIFT) |
+ (unit_dly_idx << DDRPHYC_DXNDQSTR_DQSNDLY_SHIFT));
+
+ /* After changing this value, an ITM soft reset (PIR.ITMSRST=1,
+ * plus PIR.INIT=1) must be issued.
+ */
+ stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST);
+}
+
+/* Sets the DQ unit delay for a bit line in particular byte lane.
+ * unit delay is specified by giving the desired delay
+ */
+static void set_DQ_unit_delay(struct stm32mp1_ddrphy *phy,
+ u8 byte, u8 bit,
+ u8 dq_delay_index)
+{
+ u8 dq_bit_delay_val = dq_delay_index | (dq_delay_index << 2);
+
+ /* same value on delay for clock DQ an DQS_b */
+ clrsetbits_le32(DXNDQTR(phy, byte),
+ DDRPHYC_DXNDQTR_DQDLY_MASK
+ << DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit),
+ dq_bit_delay_val << DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit));
+}
+
+static void set_r0dgsl_delay(struct stm32mp1_ddrphy *phy,
+ u8 byte, u8 r0dgsl_idx)
+{
+ clrsetbits_le32(DXNDQSTR(phy, byte),
+ DDRPHYC_DXNDQSTR_R0DGSL_MASK,
+ r0dgsl_idx << DDRPHYC_DXNDQSTR_R0DGSL_SHIFT);
+}
+
+static void set_r0dgps_delay(struct stm32mp1_ddrphy *phy,
+ u8 byte, u8 r0dgps_idx)
+{
+ clrsetbits_le32(DXNDQSTR(phy, byte),
+ DDRPHYC_DXNDQSTR_R0DGPS_MASK,
+ r0dgps_idx << DDRPHYC_DXNDQSTR_R0DGPS_SHIFT);
+}
+
+/* Basic BIST configuration for data lane tests. */
+static void config_BIST(struct stm32mp1_ddrphy *phy)
+{
+ /* Selects the SDRAM bank address to be used during BIST. */
+ u32 bbank = 0;
+ /* Selects the SDRAM row address to be used during BIST. */
+ u32 brow = 0;
+ /* Selects the SDRAM column address to be used during BIST. */
+ u32 bcol = 0;
+ /* Selects the value by which the SDRAM address is incremented
+ * for each write/read access.
+ */
+ u32 bainc = 0x00000008;
+ /* Specifies the maximum SDRAM rank to be used during BIST.
+ * The default value is set to maximum ranks minus 1.
+ * must be 0 with single rank
+ */
+ u32 bmrank = 0;
+ /* Selects the SDRAM rank to be used during BIST.
+ * must be 0 with single rank
+ */
+ u32 brank = 0;
+ /* Specifies the maximum SDRAM bank address to be used during
+ * BIST before the address & increments to the next rank.
+ */
+ u32 bmbank = 1;
+ /* Specifies the maximum SDRAM row address to be used during
+ * BIST before the address & increments to the next bank.
+ */
+ u32 bmrow = 0x7FFF; /* To check */
+ /* Specifies the maximum SDRAM column address to be used during
+ * BIST before the address & increments to the next row.
+ */
+ u32 bmcol = 0x3FF; /* To check */
+ u32 bmode_conf = 0x00000001; /* DRam mode */
+ u32 bdxen_conf = 0x00000001; /* BIST on Data byte */
+ u32 bdpat_conf = 0x00000002; /* Select LFSR pattern */
+
+ /*Setup BIST for DRAM mode, and LFSR-random data pattern.*/
+ /*Write BISTRR.BMODE = 1?b1;*/
+ /*Write BISTRR.BDXEN = 1?b1;*/
+ /*Write BISTRR.BDPAT = 2?b10;*/
+
+ /* reset BIST */
+ writel(0x3, &phy->bistrr);
+
+ writel((bmode_conf << 3) | (bdxen_conf << 14) | (bdpat_conf << 17),
+ &phy->bistrr);
+
+ /*Setup BIST Word Count*/
+ /*Write BISTWCR.BWCNT = 16?b0008;*/
+ writel(0x00000200, &phy->bistwcr); /* A multiple of BL/2 */
+
+ writel(bcol | (brow << 12) | (bbank << 28), &phy->bistar0);
+ writel(brank | (bmrank << 2) | (bainc << 4), &phy->bistar1);
+
+ /* To check this line : */
+ writel(bmcol | (bmrow << 12) | (bmbank << 28), &phy->bistar2);
+}
+
+/* Select the Byte lane to be tested by BIST. */
+static void BIST_datx8_sel(struct stm32mp1_ddrphy *phy, u8 datx8)
+{
+ clrsetbits_le32(&phy->bistrr,
+ DDRPHYC_BISTRR_BDXSEL_MASK,
+ datx8 << DDRPHYC_BISTRR_BDXSEL_SHIFT);
+
+ /*(For example, selecting Byte Lane 3, BISTRR.BDXSEL = 4?b0011)*/
+ /* Write BISTRR.BDXSEL = datx8; */
+}
+
+/* Perform BIST Write_Read test on a byte lane and return test result. */
+static void BIST_test(struct stm32mp1_ddrphy *phy, u8 byte,
+ struct BIST_result *bist)
+{
+ bool result = true; /* BIST_SUCCESS */
+ u32 cnt = 0;
+ u32 error = 0;
+
+ bist->test_result = true;
+
+run:
+ itm_soft_reset(phy);
+
+ /*Perform BIST Reset*/
+ /* Write BISTRR.BINST = 3?b011; */
+ clrsetbits_le32(&phy->bistrr,
+ 0x00000007,
+ 0x00000003);
+
+ /*Re-seed LFSR*/
+ /* Write BISTLSR.SEED = 32'h1234ABCD; */
+ if (BIST_seed)
+ writel(BIST_seed, &phy->bistlsr);
+ else
+ writel(rand(), &phy->bistlsr);
+
+ /* some delay to reset BIST */
+ mdelay(1);
+
+ /*Perform BIST Run*/
+ clrsetbits_le32(&phy->bistrr,
+ 0x00000007,
+ 0x00000001);
+ /* Write BISTRR.BINST = 3?b001; */
+
+ /* Wait for a number of CTL clocks before reading BIST register*/
+ /* Wait 300 ctl_clk cycles; ... IS it really needed?? */
+ /* Perform BIST Instruction Stop*/
+ /* Write BISTRR.BINST = 3?b010;*/
+
+ /* poll on BISTGSR.BDONE. If 0, wait. ++TODO Add timeout */
+ while (!(readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDDONE))
+ ;
+
+ /*Check if received correct number of words*/
+ /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */
+ if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) ==
+ readl(&phy->bistwcr)) {
+ /*Determine if there is a data comparison error*/
+ /* if (Read BISTGSR.BDXERR = 1?b0) */
+ if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR)
+ result = false; /* BIST_FAIL; */
+ else
+ result = true; /* BIST_SUCCESS; */
+ } else {
+ result = false; /* BIST_FAIL; */
+ }
+
+ /* loop while success */
+ cnt++;
+ if (result && cnt != 1000)
+ goto run;
+
+ if (!result)
+ error++;
+
+ if (error < BIST_error_max) {
+ if (cnt != 1000)
+ goto run;
+ bist->test_result = true;
+ } else {
+ bist->test_result = false;
+ }
+}
+
+/* After running the deskew algo, this function applies the new DQ delays
+ * by reading them from the array "deskew_delay"and writing in PHY registers.
+ * The bits that are not deskewed parfectly (too much skew on them,
+ * or data eye very wide) are marked in the array deskew_non_converge.
+ */
+static void apply_deskew_results(struct stm32mp1_ddrphy *phy, u8 byte,
+ u8 deskew_delay[NUM_BYTES][8],
+ u8 deskew_non_converge[NUM_BYTES][8])
+{
+ u8 bit_i;
+ u8 index;
+
+ for (bit_i = 0; bit_i < 8; bit_i++) {
+ set_DQ_unit_delay(phy, byte, bit_i, deskew_delay[byte][bit_i]);
+ index = DQ_unit_index(phy, byte, bit_i);
+ pr_debug("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]",
+ byte, bit_i, deskew_delay[byte][bit_i],
+ index, index - 3);
+ printf("Byte %d, bit %d, DQ delay = %d",
+ byte, bit_i, deskew_delay[byte][bit_i]);
+ if (deskew_non_converge[byte][bit_i] == 1)
+ pr_debug(" - not converged : still more skew");
+ printf("\n");
+ }
+}
+
+/* DQ Bit de-skew algorithm.
+ * Deskews data lines as much as possible.
+ * 1. Add delay to DQS line until finding the failure
+ * (normally a hold time violation)
+ * 2. Reduce DQS line by small steps until finding the very first time
+ * we go back to "Pass" condition.
+ * 3. For each DQ line, Reduce DQ delay until finding the very first failure
+ * (normally a hold time fail)
+ * 4. When all bits are at their first failure delay, we can consider them
+ * aligned.
+ * Handle conrer situation (Can't find Pass-fail, or fail-pass transitions
+ * at any step)
+ * TODO Provide a return Status. Improve doc
+ */
+static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy, char *string)
+{
+ /* New DQ delay value (index), set during Deskew algo */
+ u8 deskew_delay[NUM_BYTES][8];
+ /*If there is still skew on a bit, mark this bit. */
+ u8 deskew_non_converge[NUM_BYTES][8];
+ struct BIST_result result;
+ s8 dqs_unit_delay_index = 0;
+ u8 datx8 = 0;
+ u8 bit_i = 0;
+ s8 phase_idx = 0;
+ s8 bit_i_delay_index = 0;
+ u8 success = 0;
+ struct tuning_position last_right_ok;
+ u8 force_stop = 0;
+ u8 fail_found;
+ u8 error = 0;
+ u8 nb_bytes = get_nb_bytes(ctl);
+ /* u8 last_pass_dqs_unit = 0; */
+
+ memset(deskew_delay, 0, sizeof(deskew_delay));
+ memset(deskew_non_converge, 0, sizeof(deskew_non_converge));
+
+ /*Disable DQS Drift Compensation*/
+ clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP);
+ /*Disable all bytes*/
+ /* Disable automatic power down of DLL and IOs when disabling
+ * a byte (To avoid having to add programming and delay
+ * for a DLL re-lock when later re-enabling a disabled Byte Lane)
+ */
+ clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX);
+
+ /* Disable all data bytes */
+ clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN);
+
+ /* Config the BIST block */
+ config_BIST(phy);
+ pr_debug("BIST Config done.\n");
+
+ /* Train each byte */
+ for (datx8 = 0; datx8 < nb_bytes; datx8++) {
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ datx8 + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ pr_debug("\n======================\n");
+ pr_debug("Start deskew byte %d .\n", datx8);
+ pr_debug("======================\n");
+ /* Enable Byte (DXNGCR, bit DXEN) */
+ setbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN);
+
+ /* Select the byte lane for comparison of read data */
+ BIST_datx8_sel(phy, datx8);
+
+ /* Set all DQDLYn to maximum value. All bits within the byte
+ * will be delayed with DQSTR = 2 instead of max = 3
+ * to avoid inter bits fail influence
+ */
+ writel(0xAAAAAAAA, DXNDQTR(phy, datx8));
+
+ /* Set the DQS phase delay to 90 DEG (default).
+ * What is defined here is the index of the desired config
+ * in the PHASE array.
+ */
+ phase_idx = _90deg;
+
+ /* Set DQS unit delay to the max value. */
+ dqs_unit_delay_index = MAX_DQS_UNIT_IDX;
+ DQS_unit_delay(phy, datx8, dqs_unit_delay_index);
+ DQS_phase_delay(phy, datx8, phase_idx);
+
+ /* Issue a DLL soft reset */
+ clrbits_le32(DXNDLLCR(phy, datx8), DDRPHYC_DXNDLLCR_DLLSRST);
+ setbits_le32(DXNDLLCR(phy, datx8), DDRPHYC_DXNDLLCR_DLLSRST);
+
+ /* Test this typical init condition */
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+
+ /* If the test pass in this typical condition,
+ * start the algo with it.
+ * Else, look for Pass init condition
+ */
+ if (!success) {
+ pr_debug("Fail at init condtion. Let's look for a good init condition.\n");
+ success = 0; /* init */
+ /* Make sure we start with a PASS condition before
+ * looking for a fail condition.
+ * Find the first PASS PHASE condition
+ */
+
+ /* escape if we find a PASS */
+ pr_debug("increase Phase idx\n");
+ while (!success && (phase_idx <= MAX_DQS_PHASE_IDX)) {
+ DQS_phase_delay(phy, datx8, phase_idx);
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+ phase_idx++;
+ }
+ /* if ended with success
+ * ==>> Restore the fist success condition
+ */
+ if (success)
+ phase_idx--; /* because it ended with ++ */
+ }
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ datx8 + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ /* We couldn't find a successful condition, its seems
+ * we have hold violation, lets try reduce DQS_unit Delay
+ */
+ if (!success) {
+ /* We couldn't find a successful condition, its seems
+ * we have hold violation, lets try reduce DQS_unit
+ * Delay
+ */
+ pr_debug("Still fail. Try decrease DQS Unit delay\n");
+
+ phase_idx = 0;
+ dqs_unit_delay_index = 0;
+ DQS_phase_delay(phy, datx8, phase_idx);
+
+ /* escape if we find a PASS */
+ while (!success &&
+ (dqs_unit_delay_index <=
+ MAX_DQS_UNIT_IDX)) {
+ DQS_unit_delay(phy, datx8,
+ dqs_unit_delay_index);
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+ dqs_unit_delay_index++;
+ }
+ if (success) {
+ /* Restore the first success condition*/
+ dqs_unit_delay_index--;
+ /* last_pass_dqs_unit = dqs_unit_delay_index;*/
+ DQS_unit_delay(phy, datx8,
+ dqs_unit_delay_index);
+ } else {
+ /* No need to continue,
+ * there is no pass region.
+ */
+ force_stop = 1;
+ }
+ }
+
+ /* There is an initial PASS condition
+ * Look for the first failing condition by PHASE stepping.
+ * This part of the algo can finish without converging.
+ */
+ if (force_stop) {
+ printf("Result: Failed ");
+ printf("[Cannot Deskew lines, ");
+ printf("there is no PASS region]\n");
+ error++;
+ continue;
+ }
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ datx8 + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+
+ pr_debug("there is a pass region for phase idx %d\n",
+ phase_idx);
+ pr_debug("Step1: Find the first failing condition\n");
+ /* Look for the first failing condition by PHASE stepping.
+ * This part of the algo can finish without converging.
+ */
+
+ /* escape if we find a fail (hold time violation)
+ * condition at any bit or if out of delay range.
+ */
+ while (success && (phase_idx <= MAX_DQS_PHASE_IDX)) {
+ DQS_phase_delay(phy, datx8, phase_idx);
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+ phase_idx++;
+ }
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ datx8 + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+
+ /* if the loop ended with a failing condition at any bit,
+ * lets look for the first previous success condition by unit
+ * stepping (minimal delay)
+ */
+ if (!success) {
+ pr_debug("Fail region (PHASE) found phase idx %d\n",
+ phase_idx);
+ pr_debug("Let's look for first success by DQS Unit steps\n");
+ /* This part, the algo always converge */
+ phase_idx--;
+
+ /* escape if we find a success condition
+ * or if out of delay range.
+ */
+ while (!success && dqs_unit_delay_index >= 0) {
+ DQS_unit_delay(phy, datx8,
+ dqs_unit_delay_index);
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+ dqs_unit_delay_index--;
+ }
+ /* if the loop ended with a success condition,
+ * the last delay Right OK (before hold violation)
+ * condition is then defined as following:
+ */
+ if (success) {
+ /* Hold the dely parameters of the the last
+ * delay Right OK condition.
+ * -1 to get back to current condition
+ */
+ last_right_ok.phase = phase_idx;
+ /*+1 to get back to current condition */
+ last_right_ok.unit = dqs_unit_delay_index + 1;
+ last_right_ok.bits_delay = 0xFFFFFFFF;
+ pr_debug("Found %d\n", dqs_unit_delay_index);
+ } else {
+ /* the last OK condition is then with the
+ * previous phase_idx.
+ * -2 instead of -1 because at the last
+ * iteration of the while(),
+ * we incremented phase_idx
+ */
+ last_right_ok.phase = phase_idx - 1;
+ /* Nominal+1. Because we want the previous
+ * delay after reducing the phase delay.
+ */
+ last_right_ok.unit = 1;
+ last_right_ok.bits_delay = 0xFFFFFFFF;
+ pr_debug("Not Found : try previous phase %d\n",
+ phase_idx - 1);
+
+ DQS_phase_delay(phy, datx8, phase_idx - 1);
+ dqs_unit_delay_index = 0;
+ success = true;
+ while (success &&
+ (dqs_unit_delay_index <
+ MAX_DQS_UNIT_IDX)) {
+ DQS_unit_delay(phy, datx8,
+ dqs_unit_delay_index);
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+ dqs_unit_delay_index++;
+ pr_debug("dqs_unit_delay_index = %d, result = %d\n",
+ dqs_unit_delay_index, success);
+ }
+
+ if (!success) {
+ last_right_ok.unit =
+ dqs_unit_delay_index - 1;
+ } else {
+ last_right_ok.unit = 0;
+ pr_debug("ERROR: failed region not FOUND");
+ }
+ }
+ } else {
+ /* we can't find a failing condition at all bits
+ * ==> Just hold the last test condition
+ * (the max DQS delay)
+ * which is the most likely,
+ * the closest to a hold violation
+ * If we can't find a Fail condition after
+ * the Pass region, stick at this position
+ * In order to have max chances to find a fail
+ * when reducing DQ delays.
+ */
+ last_right_ok.phase = MAX_DQS_PHASE_IDX;
+ last_right_ok.unit = MAX_DQS_UNIT_IDX;
+ last_right_ok.bits_delay = 0xFFFFFFFF;
+ pr_debug("Can't find the a fail condition\n");
+ }
+
+ /* step 2:
+ * if we arrive at this stage, it means that we found the last
+ * Right OK condition (by tweeking the DQS delay). Or we simply
+ * pushed DQS delay to the max
+ * This means that by reducing the delay on some DQ bits,
+ * we should find a failing condition.
+ */
+ printf("Byte %d, DQS unit = %d, phase = %d\n",
+ datx8, last_right_ok.unit, last_right_ok.phase);
+ pr_debug("Step2, unit = %d, phase = %d, bits delay=%x\n",
+ last_right_ok.unit, last_right_ok.phase,
+ last_right_ok.bits_delay);
+
+ /* Restore the last_right_ok condtion. */
+ DQS_unit_delay(phy, datx8, last_right_ok.unit);
+ DQS_phase_delay(phy, datx8, last_right_ok.phase);
+ writel(last_right_ok.bits_delay, DXNDQTR(phy, datx8));
+
+ /* train each bit
+ * reduce delay on each bit, and perform a write/read test
+ * and stop at the very first time it fails.
+ * the goal is the find the first failing condition
+ * for each bit.
+ * When we achieve this condition< for all the bits,
+ * we are sure they are aligned (+/- step resolution)
+ */
+ fail_found = 0;
+ for (bit_i = 0; bit_i < 8; bit_i++) {
+ if (ctrlc()) {
+ sprintf(string,
+ "interrupted at byte %d/%d, error=%d",
+ datx8 + 1, nb_bytes, error);
+ return error;
+ }
+ pr_debug("deskewing bit %d:\n", bit_i);
+ success = 1; /* init */
+ /* Set all DQDLYn to maximum value.
+ * Only bit_i will be down-delayed
+ * ==> if we have a fail, it will be definitely
+ * from bit_i
+ */
+ writel(0xFFFFFFFF, DXNDQTR(phy, datx8));
+ /* Arriving at this stage,
+ * we have a success condition with delay = 3;
+ */
+ bit_i_delay_index = 3;
+
+ /* escape if bit delay is out of range or
+ * if a fatil occurs
+ */
+ while ((bit_i_delay_index >= 0) && success) {
+ set_DQ_unit_delay(phy, datx8,
+ bit_i,
+ bit_i_delay_index);
+ BIST_test(phy, datx8, &result);
+ success = result.test_result;
+ bit_i_delay_index--;
+ }
+
+ /* if escape with a fail condition
+ * ==> save this position for bit_i
+ */
+ if (!success) {
+ /* save the delay position.
+ * Add 1 because the while loop ended with a --,
+ * and that we need to hold the last success
+ * delay
+ */
+ deskew_delay[datx8][bit_i] =
+ bit_i_delay_index + 2;
+ if (deskew_delay[datx8][bit_i] > 3)
+ deskew_delay[datx8][bit_i] = 3;
+
+ /* A flag that states we found at least a fail
+ * at one bit.
+ */
+ fail_found = 1;
+ pr_debug("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n",
+ bit_i, bit_i_delay_index + 1,
+ datx8, bit_i,
+ deskew_delay[datx8][bit_i]);
+ } else {
+ /* if we can find a success condition by
+ * back-delaying this bit, just set the delay
+ * to 0 (the best deskew
+ * possible) and mark the bit.
+ */
+ deskew_delay[datx8][bit_i] = 0;
+ /* set a flag that will be used later
+ * in the report.
+ */
+ deskew_non_converge[datx8][bit_i] = 1;
+ pr_debug("Fail not found on bit %d => deskew[%d][%d] = %d\n",
+ bit_i, datx8, bit_i,
+ deskew_delay[datx8][bit_i]);
+ }
+ }
+ pr_debug("**********byte %d tuning complete************\n",
+ datx8);
+ /* If we can't find any failure by back delaying DQ lines,
+ * hold the default values
+ */
+ if (!fail_found) {
+ for (bit_i = 0; bit_i < 8; bit_i++)
+ deskew_delay[datx8][bit_i] = 0;
+ pr_debug("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n");
+ }
+
+ apply_deskew_results(phy, datx8, deskew_delay,
+ deskew_non_converge);
+ /* Restore nominal value for DQS delay */
+ DQS_phase_delay(phy, datx8, 3);
+ DQS_unit_delay(phy, datx8, 3);
+ /* disable byte after byte bits deskew */
+ clrbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN);
+ } /* end of byte deskew */
+
+ /* re-enable all data bytes */
+ setbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN);
+ setbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN);
+ setbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN);
+ setbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN);
+
+ if (error) {
+ sprintf(string, "error = %d", error);
+ return TEST_FAILED;
+ }
+
+ return TEST_PASSED;
+} /* end function */
+
+/* Trim DQS timings and set it in the centre of data eye.
+ * Look for a PPPPF region, then look for a FPPP region and finally select
+ * the mid of the FPPPPPF region
+ */
+static enum test_result eye_training(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy, char *string)
+{
+ /*Stores the DQS trim values (PHASE index, unit index) */
+ u8 eye_training_val[NUM_BYTES][2];
+ u8 byte = 0;
+ struct BIST_result result;
+ s8 dqs_unit_delay_index = 0;
+ s8 phase_idx = 0;
+ s8 dqs_unit_delay_index_pass = 0;
+ s8 phase_idx_pass = 0;
+ u8 success = 0;
+ u8 left_phase_bound_found, right_phase_bound_found;
+ u8 left_unit_bound_found, right_unit_bound_found;
+ u8 left_bound_found, right_bound_found;
+ struct tuning_position left_bound, right_bound;
+ u8 error = 0;
+ u8 nb_bytes = get_nb_bytes(ctl);
+
+ /*Disable DQS Drift Compensation*/
+ clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP);
+ /*Disable all bytes*/
+ /* Disable automatic power down of DLL and IOs when disabling a byte
+ * (To avoid having to add programming and delay
+ * for a DLL re-lock when later re-enabling a disabled Byte Lane)
+ */
+ clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX);
+
+ /*Disable all data bytes */
+ clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN);
+
+ /* Config the BIST block */
+ config_BIST(phy);
+
+ for (byte = 0; byte < nb_bytes; byte++) {
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ byte + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ right_bound.phase = 0;
+ right_bound.unit = 0;
+
+ left_bound.phase = 0;
+ left_bound.unit = 0;
+
+ left_phase_bound_found = 0;
+ right_phase_bound_found = 0;
+
+ left_unit_bound_found = 0;
+ right_unit_bound_found = 0;
+
+ left_bound_found = 0;
+ right_bound_found = 0;
+
+ /* Enable Byte (DXNGCR, bit DXEN) */
+ setbits_le32(DXNGCR(phy, byte), DDRPHYC_DXNGCR_DXEN);
+
+ /* Select the byte lane for comparison of read data */
+ BIST_datx8_sel(phy, byte);
+
+ /* Set DQS phase delay to the nominal value. */
+ phase_idx = _90deg;
+ phase_idx_pass = phase_idx;
+
+ /* Set DQS unit delay to the nominal value. */
+ dqs_unit_delay_index = 3;
+ dqs_unit_delay_index_pass = dqs_unit_delay_index;
+ success = 0;
+
+ pr_debug("STEP0: Find Init delay\n");
+ /* STEP0: Find Init delay: a delay that put the system
+ * in a "Pass" condition then (TODO) update
+ * dqs_unit_delay_index_pass & phase_idx_pass
+ */
+ DQS_unit_delay(phy, byte, dqs_unit_delay_index);
+ DQS_phase_delay(phy, byte, phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ /* If we have a fail in the nominal condition */
+ if (!success) {
+ /* Look at the left */
+ while (phase_idx >= 0 && !success) {
+ phase_idx--;
+ DQS_phase_delay(phy, byte, phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ }
+ }
+ if (!success) {
+ /* if we can't find pass condition,
+ * then look at the right
+ */
+ phase_idx = _90deg;
+ while (phase_idx <= MAX_DQS_PHASE_IDX &&
+ !success) {
+ phase_idx++;
+ DQS_phase_delay(phy, byte,
+ phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ }
+ }
+ /* save the pass condition */
+ if (success) {
+ phase_idx_pass = phase_idx;
+ } else {
+ printf("Result: Failed ");
+ printf("[Cannot DQS timings, ");
+ printf("there is no PASS region]\n");
+ error++;
+ continue;
+ }
+
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ byte + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ pr_debug("STEP1: Find LEFT PHASE DQS Bound\n");
+ /* STEP1: Find LEFT PHASE DQS Bound */
+ while ((phase_idx >= 0) &&
+ (phase_idx <= MAX_DQS_PHASE_IDX) &&
+ !left_phase_bound_found) {
+ DQS_unit_delay(phy, byte,
+ dqs_unit_delay_index);
+ DQS_phase_delay(phy, byte,
+ phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+
+ /*TODO: Manage the case were at the beginning
+ * there is already a fail
+ */
+ if (!success) {
+ /* the last pass condition */
+ left_bound.phase = ++phase_idx;
+ left_phase_bound_found = 1;
+ } else if (success) {
+ phase_idx--;
+ }
+ }
+ if (!left_phase_bound_found) {
+ left_bound.phase = 0;
+ phase_idx = 0;
+ }
+ /* If not found, lets take 0 */
+
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ byte + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ pr_debug("STEP2: Find UNIT left bound\n");
+ /* STEP2: Find UNIT left bound */
+ while ((dqs_unit_delay_index >= 0) &&
+ !left_unit_bound_found) {
+ DQS_unit_delay(phy, byte,
+ dqs_unit_delay_index);
+ DQS_phase_delay(phy, byte, phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ if (!success) {
+ left_bound.unit =
+ ++dqs_unit_delay_index;
+ left_unit_bound_found = 1;
+ left_bound_found = 1;
+ } else if (success) {
+ dqs_unit_delay_index--;
+ }
+ }
+
+ /* If not found, lets take 0 */
+ if (!left_unit_bound_found)
+ left_bound.unit = 0;
+
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ byte + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ pr_debug("STEP3: Find PHase right bound\n");
+ /* STEP3: Find PHase right bound, start with "pass"
+ * condition
+ */
+
+ /* Set DQS phase delay to the pass value. */
+ phase_idx = phase_idx_pass;
+
+ /* Set DQS unit delay to the pass value. */
+ dqs_unit_delay_index = dqs_unit_delay_index_pass;
+
+ while ((phase_idx <= MAX_DQS_PHASE_IDX) &&
+ !right_phase_bound_found) {
+ DQS_unit_delay(phy, byte,
+ dqs_unit_delay_index);
+ DQS_phase_delay(phy, byte, phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ if (!success) {
+ /* the last pass condition */
+ right_bound.phase = --phase_idx;
+ right_phase_bound_found = 1;
+ } else if (success) {
+ phase_idx++;
+ }
+ }
+
+ /* If not found, lets take the max value */
+ if (!right_phase_bound_found) {
+ right_bound.phase = MAX_DQS_PHASE_IDX;
+ phase_idx = MAX_DQS_PHASE_IDX;
+ }
+
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d, error=%d",
+ byte + 1, nb_bytes, error);
+ return TEST_FAILED;
+ }
+ pr_debug("STEP4: Find UNIT right bound\n");
+ /* STEP4: Find UNIT right bound */
+ while ((dqs_unit_delay_index <= MAX_DQS_UNIT_IDX) &&
+ !right_unit_bound_found) {
+ DQS_unit_delay(phy, byte,
+ dqs_unit_delay_index);
+ DQS_phase_delay(phy, byte, phase_idx);
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ if (!success) {
+ right_bound.unit =
+ --dqs_unit_delay_index;
+ right_unit_bound_found = 1;
+ right_bound_found = 1;
+ } else if (success) {
+ dqs_unit_delay_index++;
+ }
+ }
+ /* If not found, lets take the max value */
+ if (!right_unit_bound_found)
+ right_bound.unit = MAX_DQS_UNIT_IDX;
+
+ /* If we found a regular FAil Pass FAil pattern
+ * FFPPPPPPFF
+ * OR PPPPPFF Or FFPPPPP
+ */
+
+ if (left_bound_found || right_bound_found) {
+ eye_training_val[byte][0] = (right_bound.phase +
+ left_bound.phase) / 2;
+ eye_training_val[byte][1] = (right_bound.unit +
+ left_bound.unit) / 2;
+
+ /* If we already lost 1/2PHASE Tuning,
+ * let's try to recover by ++ on unit
+ */
+ if (((right_bound.phase + left_bound.phase) % 2 == 1) &&
+ eye_training_val[byte][1] != MAX_DQS_UNIT_IDX)
+ eye_training_val[byte][1]++;
+ pr_debug("** found phase : %d - %d & unit %d - %d\n",
+ right_bound.phase, left_bound.phase,
+ right_bound.unit, left_bound.unit);
+ pr_debug("** calculating mid region: phase: %d unit: %d (nominal is 3)\n",
+ eye_training_val[byte][0],
+ eye_training_val[byte][1]);
+ } else {
+ /* PPPPPPPPPP, we're already good.
+ * Set nominal values.
+ */
+ eye_training_val[byte][0] = 3;
+ eye_training_val[byte][1] = 3;
+ }
+ DQS_phase_delay(phy, byte, eye_training_val[byte][0]);
+ DQS_unit_delay(phy, byte, eye_training_val[byte][1]);
+
+ printf("Byte %d, DQS unit = %d, phase = %d\n",
+ byte,
+ eye_training_val[byte][1],
+ eye_training_val[byte][0]);
+ }
+
+ if (error) {
+ sprintf(string, "error = %d", error);
+ return TEST_FAILED;
+ }
+
+ return TEST_PASSED;
+}
+
+static void display_reg_results(struct stm32mp1_ddrphy *phy, u8 byte)
+{
+ u8 i = 0;
+
+ printf("Byte %d Dekew result, bit0 delay, bit1 delay...bit8 delay\n ",
+ byte);
+
+ for (i = 0; i < 8; i++)
+ printf("%d ", DQ_unit_index(phy, byte, i));
+ printf("\n");
+
+ printf("dxndllcr: [%08x] val:%08x\n",
+ DXNDLLCR(phy, byte),
+ readl(DXNDLLCR(phy, byte)));
+ printf("dxnqdstr: [%08x] val:%08x\n",
+ DXNDQSTR(phy, byte),
+ readl(DXNDQSTR(phy, byte)));
+ printf("dxndqtr: [%08x] val:%08x\n",
+ DXNDQTR(phy, byte),
+ readl(DXNDQTR(phy, byte)));
+}
+
+/* analyse the dgs gating log table, and determine the midpoint.*/
+static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte,
+ u8 dqs_gating[NUM_BYTES]
+ [MAX_GSL_IDX + 1]
+ [MAX_GPS_IDX + 1])
+{
+ /* stores the dqs gate values (gsl index, gps index) */
+ u8 dqs_gate_values[NUM_BYTES][2];
+ u8 gsl_idx, gps_idx = 0;
+ u8 left_bound_idx[2] = {0, 0};
+ u8 right_bound_idx[2] = {0, 0};
+ u8 left_bound_found = 0;
+ u8 right_bound_found = 0;
+ u8 intermittent = 0;
+ u8 value;
+
+ for (gsl_idx = 0; gsl_idx <= MAX_GSL_IDX; gsl_idx++) {
+ for (gps_idx = 0; gps_idx <= MAX_GPS_IDX; gps_idx++) {
+ value = dqs_gating[byte][gsl_idx][gps_idx];
+ if (value == 1 && left_bound_found == 0) {
+ left_bound_idx[0] = gsl_idx;
+ left_bound_idx[1] = gps_idx;
+ left_bound_found = 1;
+ } else if (value == 0 &&
+ left_bound_found == 1 &&
+ !right_bound_found) {
+ if (gps_idx == 0) {
+ right_bound_idx[0] = gsl_idx - 1;
+ right_bound_idx[1] = MAX_GPS_IDX;
+ } else {
+ right_bound_idx[0] = gsl_idx;
+ right_bound_idx[1] = gps_idx - 1;
+ }
+ right_bound_found = 1;
+ } else if (value == 1 &&
+ right_bound_found == 1) {
+ intermittent = 1;
+ }
+ }
+ }
+
+ /* if only ppppppp is found, there is no mid region. */
+ if (left_bound_idx[0] == 0 && left_bound_idx[1] == 0 &&
+ right_bound_idx[0] == 0 && right_bound_idx[1] == 0)
+ intermittent = 1;
+
+ /*if we found a regular fail pass fail pattern ffppppppff
+ * or pppppff or ffppppp
+ */
+ if (!intermittent) {
+ /*if we found a regular fail pass fail pattern ffppppppff
+ * or pppppff or ffppppp
+ */
+ if (left_bound_found || right_bound_found) {
+ pr_debug("idx0(%d): %d %d idx1(%d) : %d %d\n",
+ left_bound_found,
+ right_bound_idx[0], left_bound_idx[0],
+ right_bound_found,
+ right_bound_idx[1], left_bound_idx[1]);
+ dqs_gate_values[byte][0] =
+ (right_bound_idx[0] + left_bound_idx[0]) / 2;
+ dqs_gate_values[byte][1] =
+ (right_bound_idx[1] + left_bound_idx[1]) / 2;
+ /* if we already lost 1/2gsl tuning,
+ * let's try to recover by ++ on gps
+ */
+ if (((right_bound_idx[0] +
+ left_bound_idx[0]) % 2 == 1) &&
+ dqs_gate_values[byte][1] != MAX_GPS_IDX)
+ dqs_gate_values[byte][1]++;
+ /* if we already lost 1/2gsl tuning and gps is on max*/
+ else if (((right_bound_idx[0] +
+ left_bound_idx[0]) % 2 == 1) &&
+ dqs_gate_values[byte][1] == MAX_GPS_IDX) {
+ dqs_gate_values[byte][1] = 0;
+ dqs_gate_values[byte][0]++;
+ }
+ /* if we have gsl left and write limit too close
+ * (difference=1)
+ */
+ if (((right_bound_idx[0] - left_bound_idx[0]) == 1)) {
+ dqs_gate_values[byte][1] = (left_bound_idx[1] +
+ right_bound_idx[1] +
+ 4) / 2;
+ if (dqs_gate_values[byte][1] >= 4) {
+ dqs_gate_values[byte][0] =
+ right_bound_idx[0];
+ dqs_gate_values[byte][1] -= 4;
+ } else {
+ dqs_gate_values[byte][0] =
+ left_bound_idx[0];
+ }
+ }
+ pr_debug("*******calculating mid region: system latency: %d phase: %d********\n",
+ dqs_gate_values[byte][0],
+ dqs_gate_values[byte][1]);
+ pr_debug("*******the nominal values were system latency: 0 phase: 2*******\n");
+ set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]);
+ set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]);
+ }
+ } else {
+ /* if intermitant, restore defaut values */
+ pr_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n");
+ set_r0dgsl_delay(phy, byte, 0);
+ set_r0dgps_delay(phy, byte, 2);
+ }
+
+ /* return 0 if intermittent or if both left_bound
+ * and right_bound are not found
+ */
+ return !(intermittent || (left_bound_found && right_bound_found));
+}
+
+static enum test_result read_dqs_gating(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string)
+{
+ /* stores the log of pass/fail */
+ u8 dqs_gating[NUM_BYTES][MAX_GSL_IDX + 1][MAX_GPS_IDX + 1];
+ u8 byte, gsl_idx, gps_idx = 0;
+ struct BIST_result result;
+ u8 success = 0;
+ u8 nb_bytes = get_nb_bytes(ctl);
+
+ memset(dqs_gating, 0x0, sizeof(dqs_gating));
+
+ /*disable dqs drift compensation*/
+ clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP);
+ /*disable all bytes*/
+ /* disable automatic power down of dll and ios when disabling a byte
+ * (to avoid having to add programming and delay
+ * for a dll re-lock when later re-enabling a disabled byte lane)
+ */
+ clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX);
+
+ /* disable all data bytes */
+ clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN);
+ clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN);
+
+ /* config the bist block */
+ config_BIST(phy);
+
+ for (byte = 0; byte < nb_bytes; byte++) {
+ if (ctrlc()) {
+ sprintf(string, "interrupted at byte %d/%d",
+ byte + 1, nb_bytes);
+ return TEST_FAILED;
+ }
+ /* enable byte x (dxngcr, bit dxen) */
+ setbits_le32(DXNGCR(phy, byte), DDRPHYC_DXNGCR_DXEN);
+
+ /* select the byte lane for comparison of read data */
+ BIST_datx8_sel(phy, byte);
+ for (gsl_idx = 0; gsl_idx <= MAX_GSL_IDX; gsl_idx++) {
+ for (gps_idx = 0; gps_idx <= MAX_GPS_IDX; gps_idx++) {
+ if (ctrlc()) {
+ sprintf(string,
+ "interrupted at byte %d/%d",
+ byte + 1, nb_bytes);
+ return TEST_FAILED;
+ }
+ /* write cfg to dxndqstr */
+ set_r0dgsl_delay(phy, byte, gsl_idx);
+ set_r0dgps_delay(phy, byte, gps_idx);
+
+ BIST_test(phy, byte, &result);
+ success = result.test_result;
+ if (success)
+ dqs_gating[byte][gsl_idx][gps_idx] = 1;
+ itm_soft_reset(phy);
+ }
+ }
+ set_midpoint_read_dqs_gating(phy, byte, dqs_gating);
+ /* dummy reads */
+ readl(0xc0000000);
+ readl(0xc0000000);
+ }
+
+ /* re-enable drift compensation */
+ /* setbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); */
+ return TEST_PASSED;
+}
+
+/****************************************************************
+ * TEST
+ ****************************************************************
+ */
+static enum test_result do_read_dqs_gating(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc,
+ char *argv[])
+{
+ u32 rfshctl3 = readl(&ctl->rfshctl3);
+ u32 pwrctl = readl(&ctl->pwrctl);
+ enum test_result res;
+
+ stm32mp1_refresh_disable(ctl);
+ res = read_dqs_gating(ctl, phy, string);
+ stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl);
+
+ return res;
+}
+
+static enum test_result do_bit_deskew(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 rfshctl3 = readl(&ctl->rfshctl3);
+ u32 pwrctl = readl(&ctl->pwrctl);
+ enum test_result res;
+
+ stm32mp1_refresh_disable(ctl);
+ res = bit_deskew(ctl, phy, string);
+ stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl);
+
+ return res;
+}
+
+static enum test_result do_eye_training(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ u32 rfshctl3 = readl(&ctl->rfshctl3);
+ u32 pwrctl = readl(&ctl->pwrctl);
+ enum test_result res;
+
+ stm32mp1_refresh_disable(ctl);
+ res = eye_training(ctl, phy, string);
+ stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl);
+
+ return res;
+}
+
+static enum test_result do_display(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ int byte;
+ u8 nb_bytes = get_nb_bytes(ctl);
+
+ for (byte = 0; byte < nb_bytes; byte++)
+ display_reg_results(phy, byte);
+
+ return TEST_PASSED;
+}
+
+static enum test_result do_bist_config(struct stm32mp1_ddrctl *ctl,
+ struct stm32mp1_ddrphy *phy,
+ char *string, int argc, char *argv[])
+{
+ unsigned long value;
+
+ if (argc > 0) {
+ if (strict_strtoul(argv[0], 0, &value) < 0) {
+ sprintf(string, "invalid nbErr %s", argv[0]);
+ return TEST_FAILED;
+ }
+ BIST_error_max = value;
+ }
+ if (argc > 1) {
+ if (strict_strtoul(argv[1], 0, &value) < 0) {
+ sprintf(string, "invalid Seed %s", argv[1]);
+ return TEST_FAILED;
+ }
+ BIST_seed = value;
+ }
+ printf("Bist.nbErr = %d\n", BIST_error_max);
+ if (BIST_seed)
+ printf("Bist.Seed = 0x%x\n", BIST_seed);
+ else
+ printf("Bist.Seed = random\n");
+
+ return TEST_PASSED;
+}
+
+/****************************************************************
+ * TEST Description
+ ****************************************************************
+ */
+
+const struct test_desc tuning[] = {
+ {do_read_dqs_gating, "Read DQS gating",
+ "software read DQS Gating", "", 0 },
+ {do_bit_deskew, "Bit de-skew", "", "", 0 },
+ {do_eye_training, "Eye Training", "or DQS training", "", 0 },
+ {do_display, "Display registers", "", "", 0 },
+ {do_bist_config, "Bist config", "[nbErr] [seed]",
+ "configure Bist test", 2},
+};
+
+const int tuning_nb = ARRAY_SIZE(tuning);
Choose this option to add support for UART driver on the Marvell
Armada 3700 SoC. The base address is configured via DT.
+config MCFUART
+ bool "Freescale ColdFire UART support"
+ help
+ Choose this option to add support for UART driver on the ColdFire
+ SoC's family. The serial communication channel provides a full-duplex
+ asynchronous/synchronous receiver and transmitter deriving an
+ operating frequency from the internal bus clock or an external clock.
+
config MXC_UART
bool "IMX serial port support"
depends on MX5 || MX6
*
* Modified to add device model (DM) support
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
+ *
+ * Modified to add DM and fdt support, removed non DM code
+ * (C) Copyright 2018 Angelo Dureghello <angelo@sysam.it>
*/
/*
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
}
-#ifndef CONFIG_DM_SERIAL
-
-static int mcf_serial_init(void)
-{
- uart_t *uart_base;
- int port_idx;
-
- uart_base = (uart_t *)CONFIG_SYS_UART_BASE;
- port_idx = CONFIG_SYS_UART_PORT;
-
- return mcf_serial_init_common(uart_base, port_idx, gd->baudrate);
-}
-
-static void mcf_serial_putc(const char c)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- if (c == '\n')
- serial_putc('\r');
-
- /* Wait for last character to go. */
- while (!(readb(&uart->usr) & UART_USR_TXRDY))
- ;
-
- writeb(c, &uart->utb);
-}
-
-static int mcf_serial_getc(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- /* Wait for a character to arrive. */
- while (!(readb(&uart->usr) & UART_USR_RXRDY))
- ;
-
- return readb(&uart->urb);
-}
-
-static void mcf_serial_setbrg(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- mcf_serial_setbrg_common(uart, gd->baudrate);
-}
-
-static int mcf_serial_tstc(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- return readb(&uart->usr) & UART_USR_RXRDY;
-}
-
-static struct serial_device mcf_serial_drv = {
- .name = "mcf_serial",
- .start = mcf_serial_init,
- .stop = NULL,
- .setbrg = mcf_serial_setbrg,
- .putc = mcf_serial_putc,
- .puts = default_serial_puts,
- .getc = mcf_serial_getc,
- .tstc = mcf_serial_tstc,
-};
-
-void mcf_serial_initialize(void)
-{
- serial_register(&mcf_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &mcf_serial_drv;
-}
-
-#endif
-
-#ifdef CONFIG_DM_SERIAL
-
static int coldfire_serial_probe(struct udevice *dev)
{
struct coldfire_serial_platdata *plat = dev->platdata;
return 0;
}
+static int coldfire_ofdata_to_platdata(struct udevice *dev)
+{
+ struct coldfire_serial_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr_base;
+
+ addr_base = devfdt_get_addr(dev);
+ if (addr_base == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ plat->base = (uint32_t)addr_base;
+
+ plat->port = dev->seq;
+ plat->baudrate = gd->baudrate;
+
+ return 0;
+}
+
static const struct dm_serial_ops coldfire_serial_ops = {
.putc = coldfire_serial_putc,
.pending = coldfire_serial_pending,
.setbrg = coldfire_serial_setbrg,
};
+static const struct udevice_id coldfire_serial_ids[] = {
+ { .compatible = "fsl,mcf-uart" },
+ { }
+};
+
U_BOOT_DRIVER(serial_coldfire) = {
.name = "serial_coldfire",
.id = UCLASS_SERIAL,
+ .of_match = coldfire_serial_ids,
+ .ofdata_to_platdata = coldfire_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct coldfire_serial_platdata),
.probe = coldfire_serial_probe,
.ops = &coldfire_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
-#endif
_stm32_serial_setbrg(base, uart_info,
CONFIG_DEBUG_UART_CLOCK,
CONFIG_BAUDRATE);
- printf("DEBUG done\n");
}
static inline void _debug_uart_putc(int c)
struct stm32_uart_info *uart_info = _debug_uart_info();
while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN)
- WATCHDOG_RESET();
+ ;
}
DEBUG_UART_FUNCS
used to access the SPI NOR flash on platforms embedding this
Cadence IP core.
+config CF_SPI
+ bool "ColdFire SPI driver"
+ help
+ Enable the ColdFire SPI driver. This driver can be used on
+ some m68k SoCs.
+
config DESIGNWARE_SPI
bool "Designware SPI driver"
help
*
* Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * Support for DM and DT, non-DM code removed.
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ *
+ * TODO: fsl_dspi.c should work as a driver for the DSPI module.
*/
#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/spi_coldfire.h>
#include <spi.h>
#include <malloc.h>
-#include <asm/immap.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/io.h>
-struct cf_spi_slave {
- struct spi_slave slave;
+struct coldfire_spi_priv {
+ struct dspi *regs;
uint baudrate;
+ int mode;
int charbit;
};
-extern void cfspi_port_conf(void);
-extern int cfspi_claim_bus(uint bus, uint cs);
-extern void cfspi_release_bus(uint bus, uint cs);
-
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SPI_IDLE_VAL
#endif
#endif
-#if defined(CONFIG_CF_DSPI)
-/* DSPI specific mode */
-#define SPI_MODE_MOD 0x00200000
-#define SPI_DBLRATE 0x00100000
-
-static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave)
+/*
+ * DSPI specific mode
+ *
+ * bit 31 - 28: Transfer size 3 to 16 bits
+ * 27 - 26: PCS to SCK delay prescaler
+ * 25 - 24: After SCK delay prescaler
+ * 23 - 22: Delay after transfer prescaler
+ * 21 : Allow overwrite for bit 31-22 and bit 20-8
+ * 20 : Double baud rate
+ * 19 - 16: PCS to SCK delay scaler
+ * 15 - 12: After SCK delay scaler
+ * 11 - 8: Delay after transfer scaler
+ * 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST
+ */
+#define SPI_MODE_MOD 0x00200000
+#define SPI_MODE_DBLRATE 0x00100000
+
+#define SPI_MODE_XFER_SZ_MASK 0xf0000000
+#define SPI_MODE_DLY_PRE_MASK 0x0fc00000
+#define SPI_MODE_DLY_SCA_MASK 0x000fff00
+
+#define MCF_FRM_SZ_16BIT DSPI_CTAR_TRSZ(0xf)
+#define MCF_DSPI_SPEED_BESTMATCH 0x7FFFFFFF
+#define MCF_DSPI_MAX_CTAR_REGS 8
+
+/* Default values */
+#define MCF_DSPI_DEFAULT_SCK_FREQ 10000000
+#define MCF_DSPI_DEFAULT_MAX_CS 4
+#define MCF_DSPI_DEFAULT_MODE 0
+
+#define MCF_DSPI_DEFAULT_CTAR (DSPI_CTAR_TRSZ(7) | \
+ DSPI_CTAR_PCSSCK_1CLK | \
+ DSPI_CTAR_PASC(0) | \
+ DSPI_CTAR_PDT(0) | \
+ DSPI_CTAR_CSSCK(0) | \
+ DSPI_CTAR_ASC(0) | \
+ DSPI_CTAR_DT(1) | \
+ DSPI_CTAR_BR(6))
+
+#define MCF_CTAR_MODE_MASK (MCF_FRM_SZ_16BIT | \
+ DSPI_CTAR_PCSSCK(3) | \
+ DSPI_CTAR_PASC_7CLK | \
+ DSPI_CTAR_PDT(3) | \
+ DSPI_CTAR_CSSCK(0x0f) | \
+ DSPI_CTAR_ASC(0x0f) | \
+ DSPI_CTAR_DT(0x0f))
+
+#define setup_ctrl(ctrl, cs) ((ctrl & 0xFF000000) | ((1 << cs) << 16))
+
+static inline void cfspi_tx(struct coldfire_spi_priv *cfspi,
+ u32 ctrl, u16 data)
{
- return container_of(slave, struct cf_spi_slave, slave);
+ /*
+ * Need to check fifo level here
+ */
+ while ((readl(&cfspi->regs->sr) & 0x0000F000) >= 0x4000)
+ ;
+
+ writel(ctrl | data, &cfspi->regs->tfr);
}
-static void cfspi_init(void)
+static inline u16 cfspi_rx(struct coldfire_spi_priv *cfspi)
{
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
- cfspi_port_conf(); /* port configuration */
-
- dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 |
- DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 |
- DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 |
- DSPI_MCR_CRXF | DSPI_MCR_CTXF;
+ while ((readl(&cfspi->regs->sr) & 0x000000F0) == 0)
+ ;
- /* Default setting in platform configuration */
-#ifdef CONFIG_SYS_DSPI_CTAR0
- dspi->ctar[0] = CONFIG_SYS_DSPI_CTAR0;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR1
- dspi->ctar[1] = CONFIG_SYS_DSPI_CTAR1;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR2
- dspi->ctar[2] = CONFIG_SYS_DSPI_CTAR2;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR3
- dspi->ctar[3] = CONFIG_SYS_DSPI_CTAR3;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR4
- dspi->ctar[4] = CONFIG_SYS_DSPI_CTAR4;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR5
- dspi->ctar[5] = CONFIG_SYS_DSPI_CTAR5;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR6
- dspi->ctar[6] = CONFIG_SYS_DSPI_CTAR6;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR7
- dspi->ctar[7] = CONFIG_SYS_DSPI_CTAR7;
-#endif
+ return readw(&cfspi->regs->rfr);
}
-static void cfspi_tx(u32 ctrl, u16 data)
+static int coldfire_spi_claim_bus(struct udevice *dev)
{
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+ struct udevice *bus = dev->parent;
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dspi *dspi = cfspi->regs;
+ struct dm_spi_slave_platdata *slave_plat =
+ dev_get_parent_platdata(dev);
- while ((dspi->sr & 0x0000F000) >= 4) ;
+ if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
+ return -1;
- dspi->tfr = (ctrl | data);
+ /* Clear FIFO and resume transfer */
+ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
+
+ dspi_chip_select(slave_plat->cs);
+
+ return 0;
}
-static u16 cfspi_rx(void)
+static int coldfire_spi_release_bus(struct udevice *dev)
{
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+ struct udevice *bus = dev->parent;
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dspi *dspi = cfspi->regs;
+ struct dm_spi_slave_platdata *slave_plat =
+ dev_get_parent_platdata(dev);
- while ((dspi->sr & 0x000000F0) == 0) ;
+ /* Clear FIFO */
+ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
- return (dspi->rfr & 0xFFFF);
+ dspi_chip_unselect(slave_plat->cs);
+
+ return 0;
}
-static int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout,
- void *din, ulong flags)
+static int coldfire_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din,
+ unsigned long flags)
{
- struct cf_spi_slave *cfslave = to_cf_spi_slave(slave);
+ struct udevice *bus = dev_get_parent(dev);
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
u8 *spi_rd = NULL, *spi_wr = NULL;
- static u32 ctrl = 0;
+ static u32 ctrl;
uint len = bitlen >> 3;
- if (cfslave->charbit == 16) {
+ if (cfspi->charbit == 16) {
bitlen >>= 1;
- spi_wr16 = (u16 *) dout;
- spi_rd16 = (u16 *) din;
+ spi_wr16 = (u16 *)dout;
+ spi_rd16 = (u16 *)din;
} else {
- spi_wr = (u8 *) dout;
- spi_rd = (u8 *) din;
+ spi_wr = (u8 *)dout;
+ spi_rd = (u8 *)din;
}
if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
ctrl |= DSPI_TFR_CONT;
- ctrl = (ctrl & 0xFF000000) | ((1 << slave->cs) << 16);
+ ctrl = setup_ctrl(ctrl, slave_plat->cs);
if (len > 1) {
int tmp_len = len - 1;
+
while (tmp_len--) {
- if (dout != NULL) {
- if (cfslave->charbit == 16)
- cfspi_tx(ctrl, *spi_wr16++);
+ if (dout) {
+ if (cfspi->charbit == 16)
+ cfspi_tx(cfspi, ctrl, *spi_wr16++);
else
- cfspi_tx(ctrl, *spi_wr++);
- cfspi_rx();
+ cfspi_tx(cfspi, ctrl, *spi_wr++);
+ cfspi_rx(cfspi);
}
- if (din != NULL) {
- cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
- if (cfslave->charbit == 16)
- *spi_rd16++ = cfspi_rx();
+ if (din) {
+ cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
+ if (cfspi->charbit == 16)
+ *spi_rd16++ = cfspi_rx(cfspi);
else
- *spi_rd++ = cfspi_rx();
+ *spi_rd++ = cfspi_rx(cfspi);
}
}
len = 1; /* remaining byte */
}
- if ((flags & SPI_XFER_END) == SPI_XFER_END)
+ if (flags & SPI_XFER_END)
ctrl &= ~DSPI_TFR_CONT;
if (len) {
- if (dout != NULL) {
- if (cfslave->charbit == 16)
- cfspi_tx(ctrl, *spi_wr16);
+ if (dout) {
+ if (cfspi->charbit == 16)
+ cfspi_tx(cfspi, ctrl, *spi_wr16);
else
- cfspi_tx(ctrl, *spi_wr);
- cfspi_rx();
+ cfspi_tx(cfspi, ctrl, *spi_wr);
+ cfspi_rx(cfspi);
}
- if (din != NULL) {
- cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
- if (cfslave->charbit == 16)
- *spi_rd16 = cfspi_rx();
+ if (din) {
+ cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
+ if (cfspi->charbit == 16)
+ *spi_rd16 = cfspi_rx(cfspi);
else
- *spi_rd = cfspi_rx();
+ *spi_rd = cfspi_rx(cfspi);
}
} else {
/* dummy read */
- cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
- cfspi_rx();
+ cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
+ cfspi_rx(cfspi);
}
return 0;
}
-static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
- uint mode)
+static int coldfire_spi_set_speed(struct udevice *bus, uint max_hz)
{
- /*
- * bit definition for mode:
- * bit 31 - 28: Transfer size 3 to 16 bits
- * 27 - 26: PCS to SCK delay prescaler
- * 25 - 24: After SCK delay prescaler
- * 23 - 22: Delay after transfer prescaler
- * 21 : Allow overwrite for bit 31-22 and bit 20-8
- * 20 : Double baud rate
- * 19 - 16: PCS to SCK delay scaler
- * 15 - 12: After SCK delay scaler
- * 11 - 8: Delay after transfer scaler
- * 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST
- */
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dspi *dspi = cfspi->regs;
int prescaler[] = { 2, 3, 5, 7 };
int scaler[] = {
2, 4, 6, 8,
4096, 8192, 16384, 32768
};
int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0;
- int best_i, best_j, bestmatch = 0x7FFFFFFF, baud_speed;
- u32 bus_setup = 0;
+ int best_i, best_j, bestmatch = MCF_DSPI_SPEED_BESTMATCH, baud_speed;
+ u32 bus_setup;
+
+ cfspi->baudrate = max_hz;
+
+ /* Read current setup */
+ bus_setup = readl(&dspi->ctar[bus->seq]);
tmp = (prescaler[3] * scaler[15]);
/* Maximum and minimum baudrate it can handle */
- if ((cfslave->baudrate > (gd->bus_clk >> 1)) ||
- (cfslave->baudrate < (gd->bus_clk / tmp))) {
+ if ((cfspi->baudrate > (gd->bus_clk >> 1)) ||
+ (cfspi->baudrate < (gd->bus_clk / tmp))) {
printf("Exceed baudrate limitation: Max %d - Min %d\n",
(int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp));
- return NULL;
+ return -1;
}
/* Activate Double Baud when it exceed 1/4 the bus clk */
- if ((CONFIG_SYS_DSPI_CTAR0 & DSPI_CTAR_DBR) ||
- (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
+ if ((bus_setup & DSPI_CTAR_DBR) ||
+ (cfspi->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
bus_setup |= DSPI_CTAR_DBR;
dbr = 1;
}
- if (mode & SPI_CPOL)
- bus_setup |= DSPI_CTAR_CPOL;
- if (mode & SPI_CPHA)
- bus_setup |= DSPI_CTAR_CPHA;
- if (mode & SPI_LSB_FIRST)
- bus_setup |= DSPI_CTAR_LSBFE;
-
/* Overwrite default value set in platform configuration file */
- if (mode & SPI_MODE_MOD) {
-
- if ((mode & 0xF0000000) == 0)
- bus_setup |=
- dspi->ctar[cfslave->slave.bus] & 0x78000000;
- else
- bus_setup |= ((mode & 0xF0000000) >> 1);
-
+ if (cfspi->mode & SPI_MODE_MOD) {
/*
* Check to see if it is enabled by default in platform
* config, or manual setting passed by mode parameter
*/
- if (mode & SPI_DBLRATE) {
+ if (cfspi->mode & SPI_MODE_DBLRATE) {
bus_setup |= DSPI_CTAR_DBR;
dbr = 1;
}
- bus_setup |= (mode & 0x0FC00000) >> 4; /* PSCSCK, PASC, PDT */
- bus_setup |= (mode & 0x000FFF00) >> 4; /* CSSCK, ASC, DT */
- } else
- bus_setup |= (dspi->ctar[cfslave->slave.bus] & 0x78FCFFF0);
-
- cfslave->charbit =
- ((dspi->ctar[cfslave->slave.bus] & 0x78000000) ==
- 0x78000000) ? 16 : 8;
+ }
pbrcnt = sizeof(prescaler) / sizeof(int);
brcnt = sizeof(scaler) / sizeof(int);
for (j = 0; j < brcnt; j++) {
tmp = (baud_speed / scaler[j]) * (1 + dbr);
- if (tmp > cfslave->baudrate)
- diff = tmp - cfslave->baudrate;
+ if (tmp > cfspi->baudrate)
+ diff = tmp - cfspi->baudrate;
else
- diff = cfslave->baudrate - tmp;
+ diff = cfspi->baudrate - tmp;
if (diff < bestmatch) {
bestmatch = diff;
}
}
}
+
+ bus_setup &= ~(DSPI_CTAR_PBR(0x03) | DSPI_CTAR_BR(0x0f));
bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
- dspi->ctar[cfslave->slave.bus] = bus_setup;
+ writel(bus_setup, &dspi->ctar[bus->seq]);
- return &cfslave->slave;
+ return 0;
}
-#endif /* CONFIG_CF_DSPI */
-#ifdef CONFIG_CMD_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+static int coldfire_spi_set_mode(struct udevice *bus, uint mode)
{
- if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8)))
- return 1;
- else
- return 0;
-}
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dspi *dspi = cfspi->regs;
+ u32 bus_setup = 0;
-void spi_init(void)
-{
- cfspi_init();
-}
+ cfspi->mode = mode;
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct cf_spi_slave *cfslave;
+ if (cfspi->mode & SPI_CPOL)
+ bus_setup |= DSPI_CTAR_CPOL;
+ if (cfspi->mode & SPI_CPHA)
+ bus_setup |= DSPI_CTAR_CPHA;
+ if (cfspi->mode & SPI_LSB_FIRST)
+ bus_setup |= DSPI_CTAR_LSBFE;
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
+ /* Overwrite default value set in platform configuration file */
+ if (cfspi->mode & SPI_MODE_MOD) {
+ if ((cfspi->mode & SPI_MODE_XFER_SZ_MASK) == 0)
+ bus_setup |=
+ readl(&dspi->ctar[bus->seq]) & MCF_FRM_SZ_16BIT;
+ else
+ bus_setup |=
+ ((cfspi->mode & SPI_MODE_XFER_SZ_MASK) >> 1);
- cfslave = spi_alloc_slave(struct cf_spi_slave, bus, cs);
- if (!cfslave)
- return NULL;
+ /* PSCSCK, PASC, PDT */
+ bus_setup |= (cfspi->mode & SPI_MODE_DLY_PRE_MASK) >> 4;
+ /* CSSCK, ASC, DT */
+ bus_setup |= (cfspi->mode & SPI_MODE_DLY_SCA_MASK) >> 4;
+ } else {
+ bus_setup |=
+ (readl(&dspi->ctar[bus->seq]) & MCF_CTAR_MODE_MASK);
+ }
+
+ cfspi->charbit =
+ ((readl(&dspi->ctar[bus->seq]) & MCF_FRM_SZ_16BIT) ==
+ MCF_FRM_SZ_16BIT) ? 16 : 8;
- cfslave->baudrate = max_hz;
+ setbits_be32(&dspi->ctar[bus->seq], bus_setup);
- /* specific setup */
- return cfspi_setup_slave(cfslave, mode);
+ return 0;
}
-void spi_free_slave(struct spi_slave *slave)
+static int coldfire_spi_probe(struct udevice *bus)
{
- struct cf_spi_slave *cfslave = to_cf_spi_slave(slave);
+ struct coldfire_spi_platdata *plat = dev_get_platdata(bus);
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dspi *dspi = cfspi->regs;
+ int i;
- free(cfslave);
-}
+ cfspi->regs = (struct dspi *)plat->regs_addr;
-int spi_claim_bus(struct spi_slave *slave)
-{
- return cfspi_claim_bus(slave->bus, slave->cs);
+ cfspi->baudrate = plat->speed_hz;
+ cfspi->mode = plat->mode;
+
+ for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) {
+ unsigned int ctar = 0;
+
+ if (plat->ctar[i][0] == 0)
+ break;
+
+ ctar = DSPI_CTAR_TRSZ(plat->ctar[i][0]) |
+ DSPI_CTAR_PCSSCK(plat->ctar[i][1]) |
+ DSPI_CTAR_PASC(plat->ctar[i][2]) |
+ DSPI_CTAR_PDT(plat->ctar[i][3]) |
+ DSPI_CTAR_CSSCK(plat->ctar[i][4]) |
+ DSPI_CTAR_ASC(plat->ctar[i][5]) |
+ DSPI_CTAR_DT(plat->ctar[i][6]) |
+ DSPI_CTAR_BR(plat->ctar[i][7]);
+
+ writel(ctar, &cfspi->regs->ctar[i]);
+ }
+
+ /* Default CTARs */
+ for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++)
+ writel(MCF_DSPI_DEFAULT_CTAR, &dspi->ctar[i]);
+
+ dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 |
+ DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 |
+ DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 |
+ DSPI_MCR_CRXF | DSPI_MCR_CTXF;
+
+ return 0;
}
-void spi_release_bus(struct spi_slave *slave)
+void spi_init(void)
{
- cfspi_release_bus(slave->bus, slave->cs);
}
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus)
{
- return cfspi_xfer(slave, bitlen, dout, din, flags);
+ fdt_addr_t addr;
+ struct coldfire_spi_platdata *plat = bus->platdata;
+ const void *blob = gd->fdt_blob;
+ int node = dev_of_offset(bus);
+ int *ctar, len;
+
+ addr = devfdt_get_addr(bus);
+ if (addr == FDT_ADDR_T_NONE)
+ return -ENOMEM;
+
+ plat->regs_addr = addr;
+
+ plat->num_cs = fdtdec_get_int(blob, node, "num-cs",
+ MCF_DSPI_DEFAULT_MAX_CS);
+
+ plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
+ MCF_DSPI_DEFAULT_SCK_FREQ);
+
+ plat->mode = fdtdec_get_int(blob, node, "spi-mode",
+ MCF_DSPI_DEFAULT_MODE);
+
+ memset(plat->ctar, 0, sizeof(plat->ctar));
+
+ ctar = (int *)fdt_getprop(blob, node, "ctar-params", &len);
+
+ if (ctar && len) {
+ int i, q, ctar_regs;
+
+ ctar_regs = len / sizeof(unsigned int) / MAX_CTAR_FIELDS;
+
+ if (ctar_regs > MAX_CTAR_REGS)
+ ctar_regs = MAX_CTAR_REGS;
+
+ for (i = 0; i < ctar_regs; i++) {
+ for (q = 0; q < MAX_CTAR_FIELDS; q++)
+ plat->ctar[i][q] = *ctar++;
+ }
+ }
+
+ debug("DSPI: regs=%pa, max-frequency=%d, num-cs=%d, mode=%d\n",
+ (void *)plat->regs_addr,
+ plat->speed_hz, plat->num_cs, plat->mode);
+
+ return 0;
}
-#endif /* CONFIG_CMD_SPI */
+
+static const struct udevice_id coldfire_spi_ids[] = {
+ { .compatible = "fsl,mcf-dspi" },
+ { }
+};
+#endif
+
+static const struct dm_spi_ops coldfire_spi_ops = {
+ .claim_bus = coldfire_spi_claim_bus,
+ .release_bus = coldfire_spi_release_bus,
+ .xfer = coldfire_spi_xfer,
+ .set_speed = coldfire_spi_set_speed,
+ .set_mode = coldfire_spi_set_mode,
+};
+
+U_BOOT_DRIVER(coldfire_spi) = {
+ .name = "spi_coldfire",
+ .id = UCLASS_SPI,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+ .of_match = coldfire_spi_ids,
+ .ofdata_to_platdata = coldfire_dspi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct coldfire_spi_platdata),
+#endif
+ .probe = coldfire_spi_probe,
+ .ops = &coldfire_spi_ops,
+ .priv_auto_alloc_size = sizeof(struct coldfire_spi_priv),
+};
struct usb_ehci *ehci = NULL;
struct ehci_fsl_priv *priv = container_of(ctrl, struct ehci_fsl_priv,
ehci);
-
+#ifdef CONFIG_PPC
+ ehci = (struct usb_ehci *)lower_32_bits(priv->hcd_base);
+#else
ehci = (struct usb_ehci *)priv->hcd_base;
+#endif
+
if (ehci_fsl_init(priv, ehci, priv->ehci.hccr, priv->ehci.hcor) < 0)
return -ENXIO;
debug("Can't get the EHCI register base address\n");
return -ENXIO;
}
+#ifdef CONFIG_PPC
+ ehci = (struct usb_ehci *)lower_32_bits(priv->hcd_base);
+#else
ehci = (struct usb_ehci *)priv->hcd_base;
+#endif
hccr = (struct ehci_hccr *)(&ehci->caplength);
hcor = (struct ehci_hcor *)
((void *)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
It's a string of the EXT4 file name. This file use to store the
environment (explicit path to the file)
-if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARC
+if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARC || ARCH_STM32MP
config ENV_OFFSET
hex "Environment Offset"
#include <env_default.h>
struct hsearch_data env_htab = {
+#if CONFIG_IS_ENABLED(ENV_SUPPORT)
+ /* defined in flags.c, only compile with ENV_SUPPORT */
.change_ok = env_flags_validate,
+#endif
};
/*
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
env_reloc();
env_fix_drivers();
- env_htab.change_ok += gd->reloc_off;
+
+ if (env_htab.change_ok)
+ env_htab.change_ok += gd->reloc_off;
#endif
if (gd->env_valid == ENV_INVALID) {
#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD)
* expected to fail if passed a directory path:
*/
free(fsdata.fatbuf);
- fat_itr_root(itr, &fsdata);
- if (!fat_itr_resolve(itr, filename, TYPE_DIR)) {
+ ret = fat_itr_root(itr, &fsdata);
+ if (ret)
+ goto out_free_itr;
+ ret = fat_itr_resolve(itr, filename, TYPE_DIR);
+ if (!ret)
*size = 0;
- ret = 0;
- }
goto out_free_both;
}
return 1;
}
-static int flush_dir_table(fat_itr *itr);
+static int new_dir_table(fat_itr *itr);
+static int flush_dir(fat_itr *itr);
/*
* Fill dir_slot entries with appropriate name, id, and attr
memcpy(itr->dent, slotptr, sizeof(dir_slot));
slotptr--;
counter--;
+
+ if (itr->remaining == 0)
+ flush_dir(itr);
+
+ /* allocate a cluster for more entries */
if (!fat_itr_next(itr))
- if (!itr->dent && !itr->is_root && flush_dir_table(itr))
+ if (!itr->dent &&
+ (!itr->is_root || itr->fsdata->fatsize == 32) &&
+ new_dir_table(itr))
return -1;
}
- if (!itr->dent && !itr->is_root)
- /*
- * don't care return value here because we have already
- * finished completing an entry with name, only ending up
- * no more entry left
- */
- flush_dir_table(itr);
-
return 0;
}
}
/**
- * set_cluster() - write data to cluster
+ * set_sectors() - write data to sectors
*
- * Write 'size' bytes from 'buffer' into the specified cluster.
+ * Write 'size' bytes from 'buffer' into the specified sector.
*
* @mydata: data to be written
- * @clustnum: cluster to be written to
+ * @startsect: sector to be written to
* @buffer: data to be written
* @size: bytes to be written (but not more than the size of a cluster)
* Return: 0 on success, -1 otherwise
*/
static int
-set_cluster(fsdata *mydata, u32 clustnum, u8 *buffer, u32 size)
+set_sectors(fsdata *mydata, u32 startsect, u8 *buffer, u32 size)
{
- u32 idx = 0;
- u32 startsect;
+ u32 nsects = 0;
int ret;
- if (clustnum > 0)
- startsect = clust_to_sect(mydata, clustnum);
- else
- startsect = mydata->rootdir_sect;
-
- debug("clustnum: %d, startsect: %d\n", clustnum, startsect);
+ debug("startsect: %d\n", startsect);
if ((unsigned long)buffer & (ARCH_DMA_MINALIGN - 1)) {
ALLOC_CACHE_ALIGN_BUFFER(__u8, tmpbuf, mydata->sect_size);
size -= mydata->sect_size;
}
} else if (size >= mydata->sect_size) {
- idx = size / mydata->sect_size;
- ret = disk_write(startsect, idx, buffer);
- if (ret != idx) {
+ nsects = size / mydata->sect_size;
+ ret = disk_write(startsect, nsects, buffer);
+ if (ret != nsects) {
debug("Error writing data (got %d)\n", ret);
return -1;
}
- startsect += idx;
- idx *= mydata->sect_size;
- buffer += idx;
- size -= idx;
+ startsect += nsects;
+ buffer += nsects * mydata->sect_size;
+ size -= nsects * mydata->sect_size;
}
if (size) {
return 0;
}
+/**
+ * set_cluster() - write data to cluster
+ *
+ * Write 'size' bytes from 'buffer' into the specified cluster.
+ *
+ * @mydata: data to be written
+ * @clustnum: cluster to be written to
+ * @buffer: data to be written
+ * @size: bytes to be written (but not more than the size of a cluster)
+ * Return: 0 on success, -1 otherwise
+ */
+static int
+set_cluster(fsdata *mydata, u32 clustnum, u8 *buffer, u32 size)
+{
+ return set_sectors(mydata, clust_to_sect(mydata, clustnum),
+ buffer, size);
+}
+
+static int
+flush_dir(fat_itr *itr)
+{
+ fsdata *mydata = itr->fsdata;
+ u32 startsect, sect_offset, nsects;
+
+ if (!itr->is_root || mydata->fatsize == 32)
+ return set_cluster(mydata, itr->clust, itr->block,
+ mydata->clust_size * mydata->sect_size);
+
+ sect_offset = itr->clust * mydata->clust_size;
+ startsect = mydata->rootdir_sect + sect_offset;
+ /* do not write past the end of rootdir */
+ nsects = min_t(u32, mydata->clust_size,
+ mydata->rootdir_size - sect_offset);
+
+ return set_sectors(mydata, startsect, itr->block,
+ nsects * mydata->sect_size);
+}
+
static __u8 tmpbuf_cluster[MAX_CLUSTSIZE] __aligned(ARCH_DMA_MINALIGN);
/*
}
/*
- * Write directory entries in itr's buffer to block device
+ * Allocate a cluster for additional directory entries
*/
-static int flush_dir_table(fat_itr *itr)
+static int new_dir_table(fat_itr *itr)
{
fsdata *mydata = itr->fsdata;
int dir_newclust = 0;
unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
- if (set_cluster(mydata, itr->clust, itr->block, bytesperclust) != 0) {
- printf("error: writing directory entry\n");
- return -1;
- }
dir_newclust = find_empty_cluster(mydata);
set_fatent_value(mydata, itr->clust, dir_newclust);
if (mydata->fatsize == 32)
return itr->dent;
}
- if (!itr->dent && !itr->is_root && flush_dir_table(itr))
+ /* allocate a cluster for more entries */
+ if (!itr->dent &&
+ (!itr->is_root || itr->fsdata->fatsize == 32) &&
+ new_dir_table(itr))
/* indicate that allocating dent failed */
itr->dent = NULL;
return 0;
}
+/**
+ * normalize_longname() - check long file name and convert to lower case
+ *
+ * We assume here that the FAT file system is using an 8bit code page.
+ * Linux typically uses CP437, EDK2 assumes CP1250.
+ *
+ * @l_filename: preallocated buffer receiving the normalized name
+ * @filename: filename to normalize
+ * Return: 0 on success, -1 on failure
+ */
static int normalize_longname(char *l_filename, const char *filename)
{
- const char *p, legal[] = "!#$%&\'()-.@^`_{}~";
- unsigned char c;
- int name_len;
-
- /* Check that the filename is valid */
- for (p = filename; p < filename + strlen(filename); p++) {
- c = *p;
-
- if (('0' <= c) && (c <= '9'))
- continue;
- if (('A' <= c) && (c <= 'Z'))
- continue;
- if (('a' <= c) && (c <= 'z'))
- continue;
- if (strchr(legal, c))
- continue;
- /* extended code */
- if ((0x80 <= c) && (c <= 0xff))
- continue;
+ const char *p, illegal[] = "<>:\"/\\|?*";
+ if (strlen(filename) >= VFAT_MAXLEN_BYTES)
return -1;
- }
- /* Normalize it */
- name_len = strlen(filename);
- if (name_len >= VFAT_MAXLEN_BYTES)
- /* should return an error? */
- name_len = VFAT_MAXLEN_BYTES - 1;
+ for (p = filename; *p; ++p) {
+ if ((unsigned char)*p < 0x20)
+ return -1;
+ if (strchr(illegal, *p))
+ return -1;
+ }
- memcpy(l_filename, filename, name_len);
- l_filename[name_len] = 0; /* terminate the string */
- downcase(l_filename, INT_MAX);
+ strcpy(l_filename, filename);
+ downcase(l_filename, VFAT_MAXLEN_BYTES);
return 0;
}
memset(itr->dent, 0, sizeof(*itr->dent));
- /* Set short name to set alias checksum field in dir_slot */
+ /* Calculate checksum for short name */
set_name(itr->dent, filename);
+
+ /* Set long name entries */
if (fill_dir_slot(itr, filename)) {
ret = -EIO;
goto exit;
}
- /* Set attribute as archive for regular file */
+ /* Set short name entry */
fill_dentry(itr->fsdata, itr->dent, filename, 0, size, 0x20);
retdent = itr->dent;
}
/* Write directory table to device */
- ret = set_cluster(mydata, itr->clust, itr->block,
- mydata->clust_size * mydata->sect_size);
+ ret = flush_dir(itr);
if (ret) {
printf("Error: writing directory entry\n");
ret = -EIO;
memset(dentptr, 0, sizeof(*dentptr));
dentptr->name[0] = 0xe5;
- if (set_cluster(mydata, itr->clust, itr->block,
- mydata->clust_size * mydata->sect_size) != 0) {
+ if (flush_dir(itr)) {
printf("error: writing directory entry\n");
return -EIO;
}
}
/* Write directory table to device */
- ret = set_cluster(mydata, itr->clust, itr->block,
- mydata->clust_size * mydata->sect_size);
+ ret = flush_dir(itr);
if (ret)
printf("Error: writing directory entry\n");
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 545KB (1089 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_TERANETICS
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#ifdef CONFIG_CMD_SPI
-# define CONFIG_SYS_DSPI_CS2
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#ifdef CONFIG_CMD_SPI
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
-# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
-#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#ifdef CONFIG_CMD_SPI
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
-# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
-#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
#define CONFIG_SYS_SBFHDR_SIZE 0x13
-#ifdef CONFIG_CMD_SPI
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-#endif
/* PCI */
#ifdef CONFIG_CMD_PCI
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 family */
-#define CONFIG_QE 1 /* Has QE */
/*
* System IO Config
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 family */
-#define CONFIG_QE 1 /* Has QE */
/*
* System IO Config
#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
-#define CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
#ifndef __ASSEMBLY__
#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
-#define CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
#ifndef __ASSEMBLY__
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FW_ADDR 0xfff00000
/*
#define CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_ATHEROS
#endif
/* Default address of microcode for the Linux Fman driver */
/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 825KB (1650 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_TERANETICS
#define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_QE
/* Default address of microcode for the Linux FMan driver */
#if defined(CONFIG_SPIFLASH)
/*
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#define CONFIG_SYS_QE_FW_ADDR 0x130000
#elif defined(CONFIG_SDCARD)
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#define CONFIG_SYS_QE_FW_ADDR 0xEFE00000
#endif
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_REALTEK
#define CONFIG_SYS_DPAA_FMAN
-#ifdef CONFIG_TARGET_T1024RDB
-#define CONFIG_QE
-#endif
/* Default address of microcode for the Linux FMan driver */
#if defined(CONFIG_SPIFLASH)
/*
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#define CONFIG_SYS_QE_FW_ADDR 0x130000
#elif defined(CONFIG_SDCARD)
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#if defined(CONFIG_TARGET_T1024RDB)
#define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#define CONFIG_SYS_QE_FW_ADDR 0xEFE00000
#endif
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_REALTEK
#if defined(CONFIG_TARGET_T1024RDB)
#define RGMII_PHY1_ADDR 0x2
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
-#define CONFIG_QE
/* Default address of microcode for the Linux Fman driver */
#if defined(CONFIG_SPIFLASH)
/*
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 825KB (1650 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#define CONFIG_SYS_QE_FW_ADDR 0xEFF10000
#endif
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_REALTEK
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
-#define CONFIG_QE
#define CONFIG_U_QE
/* Default address of microcode for the Linux Fman driver */
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_REALTEK
#endif
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_REALTEK
#define CONFIG_PHY_TERANETICS
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#define CONFIG_CORTINA_FW_ADDR 0x120000
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_CORTINA_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#define CONFIG_CORTINA_FW_ADDR (512 * 0x8a0)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_CORTINA_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_CORTINA_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_CORTINA_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#define CONFIG_CORTINA_FW_ADDR 0xFFE10000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_CORTINA_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#define CONFIG_CORTINA_FW_ADDR 0xEFE00000
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_CORTINA
#define CONFIG_PHY_REALTEK
#define CONFIG_CORTINA_FW_LENGTH 0x40000
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_TERANETICS
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#endif /* CONFIG_NOBQFMAN */
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_CORTINA
#include "bcmstb.h"
-#define BCMSTB_SDHCI_BASE 0xf0200300
#define BCMSTB_TIMER_LOW 0xf0412008
#define BCMSTB_TIMER_HIGH 0xf041200c
#define BCMSTB_TIMER_FREQUENCY 0xf0412020
#include "bcmstb.h"
-#define BCMSTB_SDHCI_BASE 0xf03e0200
#define BCMSTB_TIMER_LOW 0xf0412008
#define BCMSTB_TIMER_HIGH 0xf041200c
#define BCMSTB_TIMER_FREQUENCY 0xf0412020
#define NANDTGTS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-"cfgscr=nand read ${cfgaddr} cfgscr && source ${cfgaddr}\0" \
+"cfgscr=mw ${dtbaddr} 0; nand read ${cfgaddr} cfgscr && source ${cfgaddr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
"nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
"root=mtd6 rootfstype=jffs2 b_mode=${b_mode}\0" \
"b_nand=nand read ${loadaddr} kernel; nand read ${dtbaddr} dtb; " \
#ifdef CONFIG_ENV_IS_IN_MMC
#define MMCTGTS \
MMCSPI_TGTS \
-"cfgscr=mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr}\0"
+"cfgscr=mw ${dtbaddr} 0;" \
+" mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0"
#else
#define MMCTGTS ""
#endif /* CONFIG_MMC */
#ifdef CONFIG_SPI
#define SPITGTS \
MMCSPI_TGTS \
-"cfgscr=sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr}\0"
+"cfgscr=mw ${dtbaddr} 0;" \
+" sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0"
#else
#define SPITGTS ""
#endif /* CONFIG_SPI */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011-2014 OMICRON electronics GmbH
- *
- * Based on da850evm.h. Original Copyrights follow:
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_CALIMAIN
-
-/*
- * SoC Configuration
- */
-#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq()
-#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_SYS_WDTTIMERBASE DAVINCI_TIMER1_BASE
-#define CONFIG_SYS_WDT_PERIOD_LOW \
- (60 * CONFIG_SYS_OSCIN_FREQ) /* 60 s heartbeat */
-#define CONFIG_SYS_WDT_PERIOD_HIGH 0x0
-#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11)
-
-/*
- * PLL configuration
- */
-
-#define CONFIG_SYS_DA850_PLL0_PLLM \
- ((calimain_get_osc_freq() == 25000000) ? 23 : 24)
-#define CONFIG_SYS_DA850_PLL1_PLLM \
- ((calimain_get_osc_freq() == 25000000) ? 20 : 21)
-
-/*
- * DDR2 memory configuration
- */
-#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
- DV_DDR_PHY_EXT_STRBEN | \
- (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDBCR ( \
- (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \
- (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \
- (1 << DV_DDR_SDCR_DDREN_SHIFT) | \
- (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \
- (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \
- (0x3 << DV_DDR_SDCR_CL_SHIFT) | \
- (0x3 << DV_DDR_SDCR_IBANK_SHIFT) | \
- (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
-
-/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
-#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \
- (16 << DV_DDR_SDTMR1_RFC_SHIFT) | \
- (1 << DV_DDR_SDTMR1_RP_SHIFT) | \
- (1 << DV_DDR_SDTMR1_RCD_SHIFT) | \
- (1 << DV_DDR_SDTMR1_WR_SHIFT) | \
- (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \
- (7 << DV_DDR_SDTMR1_RC_SHIFT) | \
- (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \
- (1 << DV_DDR_SDTMR1_WTR_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \
- (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \
- (2 << DV_DDR_SDTMR2_XP_SHIFT) | \
- (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \
- (18 << DV_DDR_SDTMR2_XSNR_SHIFT) | \
- (199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \
- (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \
- (2 << DV_DDR_SDTMR2_CKE_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDRCR 0x000003FF
-#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30
-
-/*
- * Flash memory timing
- */
-
-#define CONFIG_SYS_DA850_CS2CFG ( \
- DAVINCI_ABCR_WSETUP(2) | \
- DAVINCI_ABCR_WSTROBE(5) | \
- DAVINCI_ABCR_WHOLD(3) | \
- DAVINCI_ABCR_RSETUP(1) | \
- DAVINCI_ABCR_RSTROBE(14) | \
- DAVINCI_ABCR_RHOLD(0) | \
- DAVINCI_ABCR_TA(3) | \
- DAVINCI_ABCR_ASIZE_16BIT)
-
-/* single 64 MB NOR flash device connected to CS2 and CS3 */
-#define CONFIG_SYS_DA850_CS3CFG CONFIG_SYS_DA850_CS2CFG
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-
-#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
- DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
- DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
- DAVINCI_SYSCFG_SUSPSRC_UART2 | \
- DAVINCI_SYSCFG_SUSPSRC_EMAC | \
- DAVINCI_SYSCFG_SUSPSRC_I2C)
-
-/* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (16 << 20))
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
-#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
-#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
-#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
-#define CONFIG_ENV_ADDR \
- (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SECT_SZ * 2)
-#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define PHYS_FLASH_SIZE (64 << 20) /* Flash size 64MB */
-#define CONFIG_SYS_MAX_FLASH_SECT \
- ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) + 3)
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#endif
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_LOADADDR 0xc0700000
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;"
-#define CONFIG_BOOT_RETRY_TIME 60 /* continue boot after 60 s inactivity */
-#define CONFIG_RESET_TO_RETRY
-
-/*
- * Default environment settings
- * gpio0 = button, gpio1 = led green, gpio2 = led red
- * verify = n ... disable kernel checksum verification for faster booting
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "tftpdir=calimero\0" \
- "flashkernel=tftpboot $loadaddr $tftpdir/uImage; " \
- "erase 0x60800000 +0x400000; " \
- "cp.b $loadaddr 0x60800000 $filesize\0" \
- "flashrootfs=" \
- "tftpboot $loadaddr $tftpdir/rootfs.jffs2; " \
- "erase 0x60c00000 +0x2e00000; " \
- "cp.b $loadaddr 0x60c00000 $filesize\0" \
- "flashuboot=tftpboot $loadaddr $tftpdir/u-boot.bin; " \
- "protect off all; " \
- "erase 0x60000000 +0x80000; " \
- "cp.b $loadaddr 0x60000000 $filesize\0" \
- "flashrlk=tftpboot $loadaddr $tftpdir/uImage-rlk; " \
- "erase 0x60080000 +0x780000; " \
- "cp.b $loadaddr 0x60080000 $filesize\0" \
- "erase_persistent=erase 0x63a00000 +0x600000;\0" \
- "bootnor=setenv bootargs console=ttyS2,115200n8 " \
- "root=/dev/mtdblock3 rw rootfstype=jffs2 " \
- "rootwait ethaddr=$ethaddr; " \
- "gpio c 1; gpio s 2; bootm 0x60800000\0" \
- "bootrlk=gpio s 1; gpio s 2;" \
- "setenv bootargs console=ttyS2,115200n8 " \
- "ethaddr=$ethaddr; bootm 0x60080000\0" \
- "boottftp=setenv bootargs console=ttyS2,115200n8 " \
- "root=/dev/mtdblock3 rw rootfstype=jffs2 " \
- "rootwait ethaddr=$ethaddr; " \
- "tftpboot $loadaddr $tftpdir/uImage;" \
- "gpio c 1; gpio s 2; bootm $loadaddr\0" \
- "checkupdate=if test -n $update_flag; then " \
- "echo Previous update failed - starting RLK; " \
- "run bootrlk; fi; " \
- "if test -n $initial_setup; then " \
- "echo Running initial setup procedure; " \
- "sleep 1; run flashall; fi\0" \
- "product=accessory\0" \
- "serial=XX12345\0" \
- "checknor=" \
- "if gpio i 0; then run bootnor; fi;\0" \
- "checkrlk=" \
- "if gpio i 0; then run bootrlk; fi;\0" \
- "checkbutton=" \
- "run checknor; sleep 1;" \
- "run checknor; sleep 1;" \
- "run checknor; sleep 1;" \
- "run checknor; sleep 1;" \
- "run checknor;" \
- "gpio s 1; gpio s 2;" \
- "echo ---- Release button to boot RLK ----;" \
- "run checkrlk; sleep 1;" \
- "run checkrlk; sleep 1;" \
- "run checkrlk; sleep 1;" \
- "run checkrlk; sleep 1;" \
- "run checkrlk; sleep 1;" \
- "run checkrlk;" \
- "echo ---- Factory reset requested ----;" \
- "gpio c 1;" \
- "setenv factory_reset true;" \
- "saveenv;" \
- "run bootnor;\0" \
- "flashall=run flashrlk;" \
- "run flashkernel;" \
- "run flashrootfs;" \
- "setenv erase_datafs true;" \
- "setenv initial_setup;" \
- "saveenv;" \
- "run bootnor;\0" \
- "verify=n\0" \
- "clearenv=protect off all;" \
- "erase 0x60040000 +0x40000;\0" \
- "altbootcmd=run bootrlk\0"
-
-#define CONFIG_PREBOOT \
- "echo Version: $ver; " \
- "echo Serial: $serial; " \
- "echo MAC: $ethaddr; " \
- "echo Product: $product; " \
- "gpio c 1; gpio c 2;"
-
-/* additions for new relocation code, must added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0xc0000000
-/* initial stack pointer in internal SRAM */
-#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00)
-
-#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
-
-#ifndef __ASSEMBLY__
-int calimain_get_osc_freq(void);
-#endif
-
-#include <asm/arch/hardware.h>
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 CompuLab, Ltd.
- * Author: Igor Grinberg <grinberg@compulab.co.il>
- *
- * Configuration settings for the CompuLab CM-T3517 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_CM_T3517 /* working with CM-T3517 */
-
-/*
- * This is needed for the DMA stuff.
- * Although the default iss 64, we still define it
- * to be on the safe side once the default is changed.
- */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap.h>
-
-#define CONFIG_MACH_TYPE MACH_TYPE_CM_T3517
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-/*
- * The early kernel mapping on ARM currently only maps from the base of DRAM
- * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
- * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
- * so that leaves DRAM base to DRAM base + 0x4000 available.
- */
-#define CONFIG_SYS_BOOTMAPSZ 0x4000
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
-/* USB */
-
-#ifndef CONFIG_USB_MUSB_AM35X
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
-#endif /* CONFIG_USB_MUSB_AM35X */
-
-/* commands to include */
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_BUS 0
-#define CONFIG_I2C_MULTI_BUS
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
- /* to access nand at */
- /* CS0 */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
- /* devices */
-
-/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
- "baudrate=115200\0" \
- "console=ttyO2,115200n8\0" \
- "netretry=yes\0" \
- "mpurate=auto\0" \
- "vram=12M\0" \
- "dvimode=1024x768MR-16@60\0" \
- "defaultdisplay=dvi\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
- "mmcrootfstype=ext4\0" \
- "nandroot=/dev/mtdblock4 rw\0" \
- "nandrootfstype=ubifs\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "nandargs=setenv bootargs console=${console} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} 2a0000 400000; " \
- "bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run nandboot; " \
- "fi; " \
- "fi; " \
- "else run nandboot; fi"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_TIMESTAMP
-#define CONFIG_SYS_AUTOLOAD "no"
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000)
-
-/*
- * AM3517 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define CONFIG_SYS_CS0_SIZE (256 << 20)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#define CONFIG_ENV_OFFSET 0x260000
-#define CONFIG_ENV_ADDR 0x260000
-
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_ARP_TIMEOUT 200UL
-#define CONFIG_NET_RETRY_COUNT 5
-#endif /* CONFIG_CMD_NET */
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* Status LED */
-#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */
-
-/* Display Configuration */
-#define LCD_BPP LCD_COLOR16
-
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASHIMAGE_GUARD
-#define CONFIG_BMP_16BPP
-#define CONFIG_SCF0403_LCD
-
-/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_SYS_EEPROM_SIZE 256
-
-#endif /* __CONFIG_H */
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
* env, so we got 0x110000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
* about 825KB (1650 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* slave SRIO or PCIE outbound window->master inbound window->
* master LAW->the ucode address in master's memory space.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_TERANETICS
* about 825KB (1650 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
-#endif
-
#ifdef CONFIG_PCI
#define CONFIG_PCI_INDIRECT_BRIDGE
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-#define CONFIG_USE_SPIFLASH
-#define CONFIG_SYS_USE_NAND
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
-#define CONFIG_PREBOOT
-
-/*
- * SoC Configuration
- */
-#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ 24000000
-#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-
-/* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-
-#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
-#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
-
-/*
- * I2C Configuration
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#endif
-
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_ENV_SIZE (8 << 10)
-#define CONFIG_ENV_OFFSET 0x80000
-#define CONFIG_ENV_SECT_SIZE (64 << 10)
-#endif
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-/* NAND Setup */
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_NO_SUBPAGE
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
-#undef CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#endif
-
-#if !defined(CONFIG_SYS_USE_NAND) && \
- !defined(CONFIG_USE_NOR) && \
- !defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_SIZE (16 << 10)
-#endif
-
-/* additions for new relocation code, must added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0xc0000000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "ea20"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "as=3\0" \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "rfsbargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rfsbpath}\0" \
- "testrfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${testrfspath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw initrd=" \
- "0x${ramdisk_addr_r},4M\0" \
- "mtdids=nand0=davinci_nand.0\0" \
- "serverip=192.168.5.249\0" \
- "ipaddr=192.168.5.248\0" \
- "rootpath=/opt/eldk/arm\0" \
- "splashpos=230,180\0" \
- "testrfspath=/opt/eldk/test_arm\0" \
- "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \
- "ubi.mtd=${as} root=ubi0:rootfs\0" \
- "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \
- "ubi.mtd=${as} root=ubi0:rootfs\0" \
- "addip_sta=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
- "addip=if test -n ${ipdyn};then run addip_dyn;" \
- "else run addip_sta;fi\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addtty=setenv bootargs ${bootargs}" \
- " console=${consoledev},${baudrate}n8\0" \
- "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
- "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \
- "consoledev=ttyS0\0" \
- "loadaddr=c0000014\0" \
- "memory=32M\0" \
- "kernel_addr_r=c0700000\0" \
- "hostname=" CONFIG_HOSTNAME "\0" \
- "bootfile=" CONFIG_HOSTNAME "/uImage\0" \
- "ramdisk_file=" CONFIG_HOSTNAME "/image.ext2\0" \
- "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \
- "bootm ${kernel_addr_r}\0" \
- "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \
- "bootm ${kernel_addr}\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
- "run nfsargs addip addtty addmtd addmisc addmem;" \
- "bootm ${kernel_addr_r}\0" \
- "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \
- "run rfsbargs addip addtty addmtd addmisc addmem; " \
- "bootm ${kernel_addr_r}\0" \
- "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \
- "run testrfsargs addip addtty addmtd addmisc addmem; " \
- "bootm ${kernel_addr_r}\0" \
- "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
- "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
- "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
- "ubifsload ${kernel_addr_r} /boot/uImage;" \
- "ubifsumount; run nandargs addip addtty " \
- "addmtd addmisc addmem;clrlogo;" \
- "bootm ${kernel_addr_r}\0" \
- "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
- "ubifsload ${kernel_addr_r} /boot/uImage;" \
- "ubifsumount; run nandrwargs addip addtty " \
- "addmtd addmisc addmem;clrlogo;" \
- "bootm ${kernel_addr_r}\0" \
- "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \
- " addip addtty addmtd addmisc addmem;" \
- "clrlogo;bootm ${kernel_addr_r}\0" \
- "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
- "load_magic=if sf probe 0;then sf " \
- "read c0000000 0x10000 0x60000;fi\0" \
- "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
- "if ubifsload c0000014 /boot/u-boot.bin;" \
- "then mw c0000008 ${filesize};else echo Error reading" \
- " u-boot from nand!;fi\0" \
- "load_net=if sf probe 0;then sf read c0000000 0x10000 " \
- "0x60000;tftp c0000014 ${u-boot};" \
- "mw c0000008 ${filesize};fi\0" \
- "upd=if sf probe 0;then sf erase 10000 60000;" \
- "sf write c0000000 10000 60000;fi\0" \
- "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \
- "sf erase 0 10000;" \
- "sf write 0xc0700000 0 ${filesize};fi\0" \
- "ubootupd_net=if run load_net;then echo Updating u-boot;" \
- "if run upd; then echo U-Boot updated;" \
- "else echo Error updating u-boot !;" \
- "echo Board without bootloader !!;" \
- "fi;" \
- "else echo U-Boot not downloaded..exiting;fi\0" \
- "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \
- "bootcmd=run net_testrfs\0"
-
-#include <asm/arch/hardware.h>
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2012 8D Technologies inc.
- * Based on mt_ventoux.h, original banner below:
- *
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "tam3517-common.h"
-
-/* Our console port is port3 */
-#undef CONFIG_SYS_NS16550_COM1
-
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-
-#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK
-
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_HOSTNAME "eco5pk"
-
-/*
- * Set its own mtdparts, different from common
- */
-
-/*
- * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten.
- */
-#undef CONFIG_ENV_OFFSET_REDUND
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_SYS_ENV_SECT_SIZE)
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
- "install_kernel=if dhcp $bootfile; then nand erase kernel;" \
- "nand write $fileaddr kernel; fi\0" \
- "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
- "serverip=192.168.142.60\0"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- * Based on:
- * U-Boot:include/configs/da850evm.h
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-
-/*
- * SoC Configuration
- */
-#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ 24000000
-#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-
-/* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
-
-#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
- DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
- DAVINCI_SYSCFG_SUSPSRC_UART2 | \
- DAVINCI_SYSCFG_SUSPSRC_UART0 | \
- DAVINCI_SYSCFG_SUSPSRC_EMAC)
-
-/*
- * PLL configuration
- */
-
-#define CONFIG_SYS_DA850_PLL0_PLLM 24
-#define CONFIG_SYS_DA850_PLL1_PLLM 24
-
-/*
- * DDR2 memory configuration
- */
-#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
- DV_DDR_PHY_EXT_STRBEN | \
- (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
-#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000498
-
-#define CONFIG_SYS_DA850_DDR2_SDBCR2 0x00000004
-#define CONFIG_SYS_DA850_DDR2_PBBPR 0x00000020
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \
- (13 << DV_DDR_SDTMR1_RFC_SHIFT) | \
- (2 << DV_DDR_SDTMR1_RP_SHIFT) | \
- (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \
- (2 << DV_DDR_SDTMR1_WR_SHIFT) | \
- (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \
- (8 << DV_DDR_SDTMR1_RC_SHIFT) | \
- (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \
- (1 << DV_DDR_SDTMR1_WTR_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \
- (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \
- (2 << DV_DDR_SDTMR2_XP_SHIFT) | \
- (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \
- (14 << DV_DDR_SDTMR2_XSNR_SHIFT) | \
- (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) | \
- (1 << DV_DDR_SDTMR2_RTP_SHIFT) | \
- (2 << DV_DDR_SDTMR2_CKE_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDBCR ( \
- (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \
- (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \
- (1 << DV_DDR_SDCR_DDREN_SHIFT) | \
- (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \
- (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \
- (2 << DV_DDR_SDCR_CL_SHIFT) | \
- (3 << DV_DDR_SDCR_IBANK_SHIFT) | \
- (2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
-
-#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \
- DAVINCI_ABCR_WSTROBE(2) | \
- DAVINCI_ABCR_WHOLD(0) | \
- DAVINCI_ABCR_RSETUP(1) | \
- DAVINCI_ABCR_RSTROBE(2) | \
- DAVINCI_ABCR_RHOLD(1) | \
- DAVINCI_ABCR_TA(0) | \
- DAVINCI_ABCR_ASIZE_8BIT)
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-
-/*
- * Flash & Environment
- */
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_CS 3
-#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_NAND_MASK_CLE 0x10
-#define CONFIG_SYS_NAND_MASK_ALE 0x8
-#undef CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x120000
-#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
- CONFIG_SYS_NAND_U_BOOT_SIZE - \
- CONFIG_SYS_MALLOC_LEN - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_NAND_ECCPOS { \
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63}
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 10
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_LOAD
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#endif
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-#define CONFIG_HWCONFIG /* enable hwconfig */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
- "root=/dev/mtdblock5 rw noinitrd " \
- "rootfstype=jffs2 noinitrd\0" \
- "hwconfig=dsp:wake=yes\0" \
- "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
- "bootfile=uImage\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "mtddevname=uboot-env\0" \
- "mtddevnum=0\0" \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "u-boot=/tftpboot/ipam390/u-boot.ais\0" \
- "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
- "nand write c0000000 20000 ${filesize}\0" \
- "setbootparms=nand read c0100000 200000 400000;" \
- "run defbootargs addmtd;" \
- "spl export atags c0100000;" \
- "nand erase.part bootparms;" \
- "nand write c0000100 180000 20000\0" \
- "\0"
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-/* defines for SPL */
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
- CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_STACK 0x8001ff00
-#define CONFIG_SPL_MAX_SIZE 0x20000
-#define CONFIG_SPL_MAX_FOOTPRINT 32768
-
-/* additions for new relocation code, must added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0xc0000000
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-
-/* add FALCON boot mode */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
-#define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR
-
-/* GPIO support */
-#define CONFIG_IPAM390_GPIO_BOOTMODE ((16 * 7) + 14)
-
-#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_IPAM390_GPIO_LED_RED ((16 * 7) + 11)
-#define CONFIG_IPAM390_GPIO_LED_GREEN ((16 * 7) + 12)
-
-#include <asm/arch/hardware.h>
-
-#endif /* __CONFIG_H */
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 family */
-#define CONFIG_QE 1 /* Has QE */
#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
#define CONFIG_83XX_PCICLK 66000000
/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
/* between the u-boot partition and env */
#ifndef CONFIG_SYS_QE_FW_ADDR
#define CONFIG_SYS_QE_FW_ADDR 0xF00C0000
/*
* High Level Configuration Options
*/
-#define CONFIG_QE /* Has QE */
#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */
/*
/*
* High Level Configuration Options
*/
-#define CONFIG_QE /* Has QE */
/*
* QE UEC ethernet configuration
* env is stored at 0x100000, sector size is 0x10000, x2 (redundant)
* ucode is stored after env, so we got 0x120000.
*/
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x120000
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#define CONFIG_FMAN_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PCI_INDIRECT_BRIDGE
/*SPI device */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_FSL_SPI_INTERFACE
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#endif
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
- !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#endif
-
/*
* IFC Definitions
*/
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
- !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#endif
-
/*
* IFC Definitions
*/
#else
#ifdef CONFIG_NAND_BOOT
/* Store Fman ucode at offeset 0x900000(72 blocks). */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE)
#elif defined(CONFIG_SD_BOOT)
/*
* about 1MB (2040 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
#define CONFIG_SYS_QE_FW_ADDR (512 * 0x4A00)
#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
/* FMan fireware Pre-load address */
#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
#define CONFIG_SYS_QE_FW_ADDR 0x60940000
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_REALTEK
#define CONFIG_PHYLIB_10G
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
-
#define RGMII_PHY1_ADDR 0x1
#define RGMII_PHY2_ADDR 0x2
* about 1MB (2048 blocks), Env is stored after the image, and the env size is
* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
*/
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
#elif defined(CONFIG_NAND_BOOT)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR (36 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
#endif
#endif
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_REALTEK
#define CONFIG_PHYLIB_10G
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
#define RGMII_PHY1_ADDR 0x1
#define RGMII_PHY2_ADDR 0x2
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * Based on omap3_evm_config.h
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-#define CONFIG_MACH_TYPE MACH_TYPE_MCX
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap.h>
-
-/*
- * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
- * and older u-boot.bin with the new U-Boot SPL.
- */
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
-#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-/*
- * DDR related
- */
-#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
-/* EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57
-
-/* commands to include */
-
-#define CONFIG_SYS_I2C
-
-/* RTC */
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
- /* to access */
- /* nand at CS0 */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
- /* NAND devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
-
-/* Environment information */
-
-#define CONFIG_BOOTFILE "uImage"
-
-/* Setup MTD for NAND on the SOM */
-
-#define CONFIG_HOSTNAME "mcx"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "adddbg=setenv bootargs ${bootargs} trace_buf_size=64M\0" \
- "adddebug=setenv bootargs ${bootargs} earlyprintk=serial\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "addfb=setenv bootargs ${bootargs} vram=6M " \
- "omapfb.vram=1:2M,2:2M,3:2M omapdss.def_disp=lcd\0" \
- "addip_sta=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:eth0:off\0" \
- "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
- "addip=if test -n ${ipdyn};then run addip_dyn;" \
- "else run addip_sta;fi\0" \
- "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
- "addtty=setenv bootargs ${bootargs} " \
- "console=${consoledev},${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "baudrate=115200\0" \
- "consoledev=ttyO2\0" \
- "hostname=" CONFIG_HOSTNAME "\0" \
- "loadaddr=0x82000000\0" \
- "load=tftp ${loadaddr} ${u-boot}\0" \
- "load_k=tftp ${loadaddr} ${bootfile}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
- "loadmlo=tftp ${loadaddr} ${mlo}\0" \
- "mlo=" CONFIG_HOSTNAME "/MLO\0" \
- "mmcargs=root=/dev/mmcblk0p2 rw " \
- "rootfstype=ext3 rootwait\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "run addip addtty addmtd addfb addeth addmisc;" \
- "run loaduimage; " \
- "bootm ${loadaddr}\0" \
- "net_nfs=run load_k; " \
- "run nfsargs; " \
- "run addip addtty addmtd addfb addeth addmisc;" \
- "bootm ${loadaddr}\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "u-boot=" CONFIG_HOSTNAME "/u-boot.img\0" \
- "uboot_addr=0x80000\0" \
- "update=nandecc sw;nand erase ${uboot_addr} 100000;" \
- "nand write ${loadaddr} ${uboot_addr} 80000\0" \
- "updatemlo=nandecc hw;nand erase 0 20000;" \
- "nand write ${loadaddr} 0 20000\0" \
- "upd=if run load;then echo Updating u-boot;if run update;" \
- "then echo U-Boot updated;" \
- "else echo Error updating u-boot !;" \
- "echo Board without bootloader !!;" \
- "fi;" \
- "else echo U-Boot not downloaded..exiting;fi\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
- "nandargs=setenv bootargs ubi.mtd=7 " \
- "root=ubi0:rootfs rootfstype=ubifs\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "ubi part nand0,4;" \
- "ubi readvol ${loadaddr} kernel;" \
- "run addtty addmtd addfb addeth addmisc;" \
- "bootm ${loadaddr}\0" \
- "preboot=ubi part nand0,7;" \
- "ubi readvol ${loadaddr} splash;" \
- "bmp display ${loadaddr};" \
- "gpio set 55\0" \
- "swupdate_args=setenv bootargs root=/dev/ram " \
- "quiet loglevel=1 " \
- "consoleblank=0 ${swupdate_misc}\0" \
- "swupdate=echo Running Sw-Update...;" \
- "if printenv mtdparts;then echo Starting SwUpdate...; " \
- "else mtdparts default;fi; " \
- "ubi part nand0,5;" \
- "ubi readvol 0x82000000 kernel_recovery;" \
- "ubi part nand0,6;" \
- "ubi readvol 0x84000000 fs_recovery;" \
- "run swupdate_args; " \
- "setenv bootargs ${bootargs} " \
- "${mtdparts} " \
- "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \
- "omapdss.def_disp=lcd;" \
- "bootm 0x82000000 0x84000000\0" \
- "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \
- "then source 82000000;else run nandboot;fi\0"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
- 0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
- /* address */
-#define CONFIG_PREBOOT
-
-/*
- * AM3517 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-
-/*
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Redundant Environment */
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_ENV_OFFSET 0x180000
-#define CONFIG_ENV_ADDR 0x180000
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- 2 * CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* Defines for SPL */
-
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-
-#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
-#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-
-/* move malloc and bss high to prevent clashing with the main image */
-#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
-#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
-/* NAND boot config */
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\
- 48, 49, 50, 51, 52, 53, 54, 55,\
- 56, 57, 58, 59, 60, 61, 62, 63}
-#define CONFIG_SYS_NAND_ECCSIZE 256
-#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
-#define CONFIG_SPL_NAND_SOFTECC
-
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-
-/*
- * ethernet support
- *
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#endif
-
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_VIDEO_BMP_RLE8
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- *
- * Configuration settings for the Teejet mt_ventoux board.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "tam3517-common.h"
-
-#undef CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \
- 6 * 1024 * 1024)
-
-#define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX
-
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_HOSTNAME "mt_ventoux"
-
-/*
- * Set its own mtdparts, different from common
- */
-
-/*
- * FPGA
- */
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_WAIT 10000
-#define CONFIG_MAX_FPGA_DEVICES 1
-#define CONFIG_FPGA_DELAY() udelay(1)
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_VIDEO_BMP_RLE8
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
- "bootcmd=run net_nfs\0"
-
-#endif /* __CONFIG_H */
#if defined(CONFIG_TARGET_P1021RDB)
#define CONFIG_BOARDNAME "P1021RDB-PC"
#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_QE
#define CONFIG_VSC7385_ENET
#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
addresses in the LBC */
#if defined(CONFIG_TARGET_P1025RDB)
#define CONFIG_BOARDNAME "P1025RDB"
#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_QE
#define CONFIG_SLIC
#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
#ifdef CONFIG_QE
/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FW_ADDR 0xefec0000
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#endif /* CONFIG_QE */
#if defined(CONFIG_TWR_P1025)
#define CONFIG_BOARDNAME "TWR-P1025"
#define CONFIG_PHY_ATHEROS
-#define CONFIG_QE
#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Conversion of LBC addr */
#define CONFIG_SYS_LBC_LCRR 0x80000002 /* LB clock ratio reg */
#endif
#ifdef CONFIG_QE
/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FW_ADDR 0xefec0000
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#endif /* CONFIG_QE */
#define CONFIG_REMAKE_ELF
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_TARGET "spl/u-boot-spl.scif"
+#endif
+
/* boot option */
#define CONFIG_CMDLINE_TAG
"tftp 0x48000000 Image-"CONFIG_DEFAULT_FDT_FILE"; " \
"booti 0x48080000 - 0x48000000"
+/* SPL support */
+#if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965)
+#define CONFIG_SPL_BSS_START_ADDR 0xe633f000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x1000
+#else
+#define CONFIG_SPL_BSS_START_ADDR 0xe631f000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x1000
+#endif
+#define CONFIG_SPL_STACK 0xe6304000
+#define CONFIG_SPL_MAX_SIZE 0x7000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SH_SCIF_CLK_FREQ 65000000
+#endif
+
#endif /* __RCAR_GEN3_COMMON_H */
#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
#endif
-/*
- * malloc() pool size
- */
-#define CONFIG_SYS_MALLOC_LEN SZ_32M
-
/*
* Configuration of the external SRAM memory used by U-Boot
*/
*/
#define CONFIG_SYS_LOAD_ADDR STM32_DDR_BASE
-/*
- * Env parameters
- */
-#define CONFIG_ENV_SIZE SZ_4K
-
/* ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
* for nand boot, boot with on ubifs partition on nand
* for nor boot, use the default order
*/
-#define CONFIG_PREBOOT
-
#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
"echo \"Boot over ${boot_device}${boot_instance}!\";" \
"if test ${boot_device} = serial || test ${boot_device} = usb;" \
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1) | \
- DSPI_CTAR_BR(6))
-#define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
-#define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
-
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- *
- * Configuration for the Technexion twister board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "tam3517-common.h"
-
-#define CONFIG_MACH_TYPE MACH_TYPE_TAM3517
-
-#define CONFIG_TAM3517_SW3_SETTINGS
-#define CONFIG_XR16L2751
-
-
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_HOSTNAME "twister"
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
- "bootcmd=run nandboot\0"
-
-/* SPL OS boot options */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
-
-#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
-
-#endif /* __CONFIG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+#ifndef __spi_coldfire_h
+#define __spi_coldfire_h
+
+#define MAX_CTAR_REGS 8
+#define MAX_CTAR_FIELDS 8
+
+/*
+ * struct coldfire_spi_platdata - information about a coldfire spi module
+ *
+ * @regs_addr: base address for module registers
+ * @speed_hz: default SCK frequency
+ * @mode: default SPI mode
+ * @num_cs: number of DSPI chipselect signals
+ */
+struct coldfire_spi_platdata {
+ fdt_addr_t regs_addr;
+ uint speed_hz;
+ uint mode;
+ uint num_cs;
+ uint ctar[MAX_CTAR_REGS][MAX_CTAR_FIELDS];
+};
+
+#endif /* __spi_coldfire_h */
+
extern unsigned int __efi_runtime_start, __efi_runtime_stop;
extern unsigned int __efi_runtime_rel_start, __efi_runtime_rel_stop;
-/*
+/**
+ * struct efi_open_protocol_info_item - open protocol info item
+ *
* When a protocol is opened a open protocol info entry is created.
* These are maintained in a list.
+ *
+ * @link: link to the list of open protocol info entries of a protocol
+ * @info: information about the opening of a protocol
*/
struct efi_open_protocol_info_item {
- /* Link to the list of open protocol info entries of a protocol */
struct list_head link;
struct efi_open_protocol_info_entry info;
};
-/*
+/**
+ * struct efi_handler - single protocol interface of a handle
+ *
* When the UEFI payload wants to open a protocol on an object to get its
* interface (usually a struct with callback functions), this struct maps the
* protocol GUID to the respective protocol interface
+ *
+ * @link: link to the list of protocols of a handle
+ * @guid: GUID of the protocol
+ * @protocol_interface: protocol interface
+ * @open_infos link to the list of open protocol info items
*/
struct efi_handler {
- /* Link to the list of protocols of a handle */
struct list_head link;
const efi_guid_t *guid;
void *protocol_interface;
- /* Link to the list of open protocol info items */
struct list_head open_infos;
};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2005-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2010
- * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
- */
-#ifndef _led_display_h_
-#define _led_display_h_
-
-/* Display Commands */
-#define DISPLAY_CLEAR 0x1 /* Clear the display */
-#define DISPLAY_HOME 0x2 /* Set cursor at home position */
-
-void display_set(int cmd);
-int display_putc(char c);
-#endif
r = EFI_CALL(efi_locate_device_path(protocol, &dp,
&old_handle));
- if (r == EFI_SUCCESS) {
+ if (r == EFI_SUCCESS &&
+ dp->type == DEVICE_PATH_TYPE_END) {
+ EFI_PRINT("Path %pD already installed\n",
+ protocol_interface);
r = EFI_ALREADY_STARTED;
break;
}
{
#ifdef CONFIG_DM_RTC
efi_status_t ret = EFI_SUCCESS;
- int r;
struct rtc_time tm;
struct udevice *dev;
ret = EFI_INVALID_PARAMETER;
goto out;
}
-
- r = uclass_get_device(UCLASS_RTC, 0, &dev);
- if (!r)
- r = dm_rtc_get(dev, &tm);
- if (r) {
+ if (uclass_get_device(UCLASS_RTC, 0, &dev) ||
+ dm_rtc_get(dev, &tm)) {
+ ret = EFI_UNSUPPORTED;
+ goto out;
+ }
+ if (dm_rtc_get(dev, &tm)) {
ret = EFI_DEVICE_ERROR;
goto out;
}
return EFI_EXIT(ret);
#else
EFI_ENTRY("%p %p", time, capabilities);
- return EFI_EXIT(EFI_DEVICE_ERROR);
+ return EFI_EXIT(EFI_UNSUPPORTED);
#endif
}
+/**
+ * efi_set_time_boottime() - set current time
+ *
+ * This function implements the SetTime() runtime service before
+ * SetVirtualAddressMap() is called.
+ *
+ * See the Unified Extensible Firmware Interface (UEFI) specification
+ * for details.
+ *
+ * @time: pointer to structure to with current time
+ * Returns: status code
+ */
+static efi_status_t EFIAPI efi_set_time_boottime(struct efi_time *time)
+{
+#ifdef CONFIG_DM_RTC
+ efi_status_t ret = EFI_SUCCESS;
+ struct rtc_time tm;
+ struct udevice *dev;
+
+ EFI_ENTRY("%p", time);
+ if (!time) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ if (uclass_get_device(UCLASS_RTC, 0, &dev)) {
+ ret = EFI_UNSUPPORTED;
+ goto out;
+ }
+
+ memset(&tm, 0, sizeof(tm));
+ tm.tm_year = time->year;
+ tm.tm_mon = time->month;
+ tm.tm_mday = time->day;
+ tm.tm_hour = time->hour;
+ tm.tm_min = time->minute;
+ tm.tm_sec = time->second;
+ tm.tm_isdst = time->daylight == EFI_TIME_IN_DAYLIGHT;
+ /* Calculate day of week */
+ rtc_calc_weekday(&tm);
+
+ if (dm_rtc_set(dev, &tm))
+ ret = EFI_DEVICE_ERROR;
+out:
+ return EFI_EXIT(ret);
+#else
+ EFI_ENTRY("%p", time);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+#endif
+}
/**
* efi_reset_system() - reset system
*
return EFI_DEVICE_ERROR;
}
+/**
+ * efi_set_time() - set current time
+ *
+ * This function implements the SetTime runtime service after
+ * SetVirtualAddressMap() is called. As the U-Boot driver are not available
+ * anymore only an error code is returned.
+ *
+ * See the Unified Extensible Firmware Interface (UEFI) specification
+ * for details.
+ *
+ * @time: pointer to structure to with current time
+ * Returns: status code
+ */
+efi_status_t __weak __efi_runtime EFIAPI efi_set_time(struct efi_time *time)
+{
+ return EFI_UNSUPPORTED;
+}
+
struct efi_runtime_detach_list_struct {
void *ptr;
void *patchto;
/* RTC accessors are gone */
.ptr = &efi_runtime_services.get_time,
.patchto = &efi_get_time,
+ }, {
+ .ptr = &efi_runtime_services.set_time,
+ .patchto = &efi_set_time,
}, {
/* Clean up system table */
.ptr = &systab.con_in,
.headersize = sizeof(struct efi_runtime_services),
},
.get_time = &efi_get_time_boottime,
- .set_time = (void *)&efi_device_error,
+ .set_time = &efi_set_time_boottime,
.get_wakeup_time = (void *)&efi_unimplemented,
.set_wakeup_time = (void *)&efi_unimplemented,
.set_virtual_address_map = &efi_set_virtual_address_map,
#include <efi_loader.h>
/* Characters that may not be used in file names */
-static const char illegal[] = "<>:\"/\\|?*";
+static const char illegal[] = "<>:\"/\\|?*\x7f";
/*
* EDK2 assumes codepage 1250 when creating FAT 8.3 file names.
EFI_ENTRY("\"%ls\" %pUl %x %zu %p", variable_name, vendor, attributes,
data_size, data);
- if (!variable_name || !vendor) {
+ /* TODO: implement APPEND_WRITE */
+ if (!variable_name || !vendor ||
+ (attributes & EFI_VARIABLE_APPEND_WRITE)) {
ret = EFI_INVALID_PARAMETER;
goto out;
}
if (val) {
parse_attr(val, &attr);
+ /* We should not free val */
+ val = NULL;
if (attr & READ_ONLY) {
- /* We should not free val */
- val = NULL;
ret = EFI_WRITE_PROTECTED;
goto out;
}
+
+ /*
+ * attributes won't be changed
+ * TODO: take care of APPEND_WRITE once supported
+ */
+ if (attr != attributes) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
}
val = malloc(2 * data_size + strlen("{ro,run,boot}(blob)") + 1);
#include <efi_selftest.h>
#define EFI_ST_NO_RTC "Could not read real time clock\n"
+#define EFI_ST_NO_RTC_SET "Could not set real time clock\n"
static struct efi_runtime_services *runtime;
/*
* Execute unit test.
*
- * Display current time.
+ * Read and display current time.
+ * Set a new value and read it back.
+ * Set the real time clock back the current time.
*
* @return: EFI_ST_SUCCESS for success
*/
static int execute(void)
{
efi_status_t ret;
- struct efi_time tm;
+ struct efi_time tm, tm_old, tm_new = {
+ .year = 2017,
+ .month = 5,
+ .day = 19,
+ .hour = 13,
+ .minute = 47,
+ .second = 53,
+ };
/* Display current time */
- ret = runtime->get_time(&tm, NULL);
+ ret = runtime->get_time(&tm_old, NULL);
if (ret != EFI_SUCCESS) {
#ifdef CONFIG_CMD_DATE
efi_st_error(EFI_ST_NO_RTC);
efi_st_todo(EFI_ST_NO_RTC);
return EFI_ST_SUCCESS;
#endif
- } else {
- efi_st_printf("Time according to real time clock: "
- "%.4u-%.2u-%.2u %.2u:%.2u:%.2u\n",
- tm.year, tm.month, tm.day,
- tm.hour, tm.minute, tm.second);
+ }
+ efi_st_printf("Time according to real time clock: "
+ "%.4u-%.2u-%.2u %.2u:%.2u:%.2u\n",
+ tm_old.year, tm_old.month, tm_old.day,
+ tm_old.hour, tm_old.minute, tm_old.second);
+ ret = runtime->set_time(&tm_new);
+ if (ret != EFI_SUCCESS) {
+#ifdef CONFIG_CMD_DATE
+ efi_st_error(EFI_ST_NO_RTC_SET);
+ return EFI_ST_FAILURE;
+#else
+ efi_st_todo(EFI_ST_NO_RTC_SET);
+ return EFI_ST_SUCCESS;
+#endif
+ }
+ ret = runtime->get_time(&tm, NULL);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error(EFI_ST_NO_RTC);
+ return EFI_ST_FAILURE;
+ }
+ if (tm.year != tm_new.year ||
+ tm.month != tm_new.month ||
+ tm.day != tm_new.day ||
+ tm.hour != tm_new.hour ||
+ tm.minute != tm_new.minute ||
+ tm.second < tm_new.second ||
+ tm.second > tm_new.second + 2) {
+ efi_st_error(EFI_ST_NO_RTC_SET);
+ return EFI_ST_FAILURE;
+ }
+ /* Set time back to old value */
+ ret = runtime->set_time(&tm_old);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error(EFI_ST_NO_RTC_SET);
+ return EFI_ST_FAILURE;
}
return EFI_ST_SUCCESS;
EFI_VARIABLE_APPEND_WRITE,
7, v + 8);
if (ret != EFI_SUCCESS) {
- efi_st_error("SetVariable failed\n");
- return EFI_ST_FAILURE;
- }
- len = EFI_ST_MAX_DATA_SIZE;
- ret = runtime->get_variable(L"efi_st_var1", &guid_vendor1,
- &attr, &len, data);
- if (ret != EFI_SUCCESS) {
- efi_st_error("GetVariable failed\n");
- return EFI_ST_FAILURE;
+ efi_st_todo("SetVariable(APPEND_WRITE) failed\n");
+ } else {
+ len = EFI_ST_MAX_DATA_SIZE;
+ ret = runtime->get_variable(L"efi_st_var1", &guid_vendor1,
+ &attr, &len, data);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("GetVariable failed\n");
+ return EFI_ST_FAILURE;
+ }
+ if (len != 15)
+ efi_st_todo("GetVariable returned wrong length %u\n",
+ (unsigned int)len);
+ if (memcmp(data, v, len))
+ efi_st_todo("GetVariable returned wrong value\n");
}
- if (len != 15)
- efi_st_todo("GetVariable returned wrong length %u\n",
- (unsigned int)len);
- if (memcmp(data, v, len))
- efi_st_todo("GetVariable returned wrong value\n");
/* Enumerate variables */
boottime->set_mem(&guid, 16, 0);
*varname = 0;
CONFIG_BUILD_ENVCRC
CONFIG_BUS_WIDTH
CONFIG_BZIP2
-CONFIG_CADDY2
CONFIG_CALXEDA_XGMAC
CONFIG_CDP_APPLIANCE_VLAN_TYPE
CONFIG_CDP_CAPABILITIES
CONFIG_CM_REMAP
CONFIG_CM_SPD_DETECT
CONFIG_CM_T335
-CONFIG_CM_T3517
CONFIG_CM_T3X
CONFIG_CM_T43
CONFIG_CM_T54
CONFIG_CONS_SCIF3
CONFIG_CONS_SCIF4
CONFIG_CONS_SCIF5
-CONFIG_CONS_SCIF7
CONFIG_CONTROL
CONFIG_CONTROLCENTERD
CONFIG_CON_ROT
CONFIG_DISCONTIGMEM
CONFIG_DISCOVER_PHY
CONFIG_DISPLAY_AER_xxxx
-CONFIG_DLVISION_10G
CONFIG_DM9000_BASE
CONFIG_DM9000_BYTE_SWAPPED
CONFIG_DM9000_DEBUG
CONFIG_DRIVER_AX88796L
CONFIG_DRIVER_DM9000
CONFIG_DRIVER_EP93XX_MAC
-CONFIG_DRIVER_ETHER
CONFIG_DRIVER_NE2000
CONFIG_DRIVER_NE2000_BASE
CONFIG_DRIVER_NE2000_CCR
CONFIG_DRIVER_SMC911X_BASE
CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
CONFIG_DRIVER_TI_EMAC_USE_RMII
-CONFIG_DRIVE_MMC
-CONFIG_DRIVE_SATA
-CONFIG_DRIVE_TYPES
CONFIG_DSP_CLUSTER_START
CONFIG_DUOVERO
CONFIG_DWC2_DFLT_SPEED_FULL
CONFIG_EHCI_MXS_PORT0
CONFIG_EHCI_MXS_PORT1
CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
-CONFIG_EMMC_BOOT
CONFIG_EMU
CONFIG_ENABLE_36BIT_PHYS
CONFIG_ENABLE_MMU
CONFIG_ENV_SETTINGS_V2
CONFIG_ENV_SIZE_FLEX
CONFIG_ENV_SIZE_REDUND
-CONFIG_ENV_SPI_BUS
-CONFIG_ENV_SPI_CS
-CONFIG_ENV_SPI_MAX_HZ
-CONFIG_ENV_SPI_MODE
CONFIG_ENV_SROM_BANK
CONFIG_ENV_TOTAL_SIZE
CONFIG_ENV_UBIFS_OPTION
CONFIG_ESBC_HDR_LS
CONFIG_ESDHC_DETECT_8_BIT_QUIRK
CONFIG_ESDHC_DETECT_QUIRK
-CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1
CONFIG_ESDHC_HC_BLK_ADDR
CONFIG_ESPRESSO7420
CONFIG_ET1100_BASE
CONFIG_FLASH_SHOW_PROGRESS
CONFIG_FLASH_SPANSION_S29WS_N
CONFIG_FLASH_VERIFY
-CONFIG_FMAN_ENET
CONFIG_FM_PLAT_CLK_DIV
CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32
CONFIG_FORMIKE
CONFIG_GREEN_LED
CONFIG_GURNARD_FPGA
CONFIG_GURNARD_SPLASH
-CONFIG_GZIP
CONFIG_GZIP_COMPRESSED
CONFIG_GZIP_COMPRESS_DEF_SZ
CONFIG_G_DNL_THOR_PRODUCT_NUM
CONFIG_G_DNL_UMS_PRODUCT_NUM
CONFIG_G_DNL_UMS_VENDOR_NUM
CONFIG_H264_FREQ
-CONFIG_H8300
CONFIG_HAS_ETH0
CONFIG_HAS_ETH1
CONFIG_HAS_ETH2
CONFIG_I2C_TIMEOUT
CONFIG_ICACHE
CONFIG_ICS307_REFCLK_HZ
-CONFIG_IDE_PCMCIA
CONFIG_IDE_PREINIT
CONFIG_IDE_RESET
CONFIG_IDE_SWAP_IO
CONFIG_INI_MAX_SECTION
CONFIG_INTEGRITY
CONFIG_INTERRUPTS
-CONFIG_IO
-CONFIG_IO64
-CONFIG_IOCON
CONFIG_IODELAY_RECALIBRATION
CONFIG_IOMUX_LPSR
CONFIG_IOMUX_SHARE_CONF_REG
CONFIG_KIRQ_EN
CONFIG_KM8321
CONFIG_KMCOGE4
-CONFIG_KMCOGE5NE
-CONFIG_KMETER1
CONFIG_KMLION1
-CONFIG_KMOPTI2
CONFIG_KMP204X
-CONFIG_KMSUPX5
CONFIG_KMTEGR1
-CONFIG_KMTEPR2
CONFIG_KMVECT1
CONFIG_KM_BOARD_EXTRA_ENV
CONFIG_KM_BOARD_NAME
CONFIG_MCFPIT
CONFIG_MCFRTC
CONFIG_MCFTMR
-CONFIG_MCFUART
CONFIG_MCLK_DIS
CONFIG_MDIO_TIMEOUT
CONFIG_MEMSIZE
CONFIG_NO_ETH
CONFIG_NO_RELOCATION
CONFIG_NO_WAIT
-CONFIG_NR_CPUS
CONFIG_NR_DRAM_POPULATED
CONFIG_NS16550_MIN_FUNCTIONS
CONFIG_NS8382X
CONFIG_PQ_MDS_PIB
CONFIG_PQ_MDS_PIB_ATM
CONFIG_PRAM
-CONFIG_PREBOOT
CONFIG_PRINTK
CONFIG_PROC_FS
CONFIG_PROFILE_ALL_BRANCHES
CONFIG_PXA_VGA
CONFIG_PXA_VIDEO
CONFIG_QBMAN_CLK_DIV
-CONFIG_QE
CONFIG_QEMU_MIPS
CONFIG_QIXIS_I2C_ACCESS
CONFIG_QSPI
CONFIG_RD_LVL
CONFIG_REALMODE_DEBUG
CONFIG_RED_LED
-CONFIG_REFCLK_FREQ
CONFIG_REG
CONFIG_REG_0
CONFIG_REG_1_BASE
CONFIG_SCF0403_LCD
CONFIG_SCIF
CONFIG_SCIF_A
-CONFIG_SCIF_EXT_CLOCK
CONFIG_SCIF_USE_EXT_CLK
CONFIG_SCSI_AHCI_PLAT
CONFIG_SCSI_DEV_LIST
CONFIG_SHARP_LQ035Q7DH06
CONFIG_SHEEVA_88SV131
CONFIG_SHEEVA_88SV331xV5
-CONFIG_SHMIN
CONFIG_SHOW_ACTIVITY
CONFIG_SHOW_BOOT_PROGRESS
CONFIG_SH_CMT_CLK_FREQ
CONFIG_SMSTP8_ENA
CONFIG_SMSTP9_ENA
CONFIG_SOCRATES
-CONFIG_SOC_DM355
-CONFIG_SOC_DM365
CONFIG_SOC_DM644X
-CONFIG_SOC_DM646X
CONFIG_SOC_K2E
CONFIG_SOC_K2G
CONFIG_SOC_K2HK
CONFIG_ST_SMI
CONFIG_SUNXI_GPIO
CONFIG_SUNXI_MAX_FB_SIZE
-CONFIG_SUPERH_ON_CHIP_R8A66597
CONFIG_SUVD3
CONFIG_SXNI855T
CONFIG_SYSFLAGS_ADDR
CONFIG_SYS_DIRECT_FLASH_TFTP
CONFIG_SYS_DISCOVER_PHY
CONFIG_SYS_DIU_ADDR
-CONFIG_SYS_DM36x_PINMUX0
-CONFIG_SYS_DM36x_PINMUX1
-CONFIG_SYS_DM36x_PINMUX2
-CONFIG_SYS_DM36x_PINMUX3
-CONFIG_SYS_DM36x_PINMUX4
-CONFIG_SYS_DM36x_PLL1_PREDIV
-CONFIG_SYS_DM36x_PLL2_PREDIV
CONFIG_SYS_DMA_USE_INTSRAM
CONFIG_SYS_DP501_BASE
CONFIG_SYS_DP501_DIFFERENTIAL
CONFIG_SYS_FORM_PMC_XMC
CONFIG_SYS_FORM_VME
CONFIG_SYS_FORM_XMC
-CONFIG_SYS_FPGA0_BASE
-CONFIG_SYS_FPGA0_SIZE
CONFIG_SYS_FPGAREG_DATE
CONFIG_SYS_FPGAREG_DIPSW
CONFIG_SYS_FPGAREG_FREQ
CONFIG_SYS_GAFR2_U_VAL
CONFIG_SYS_GAFR3_L_VAL
CONFIG_SYS_GAFR3_U_VAL
-CONFIG_SYS_GBIT_MII1_BUSNAME
-CONFIG_SYS_GBIT_MII_BUSNAME
CONFIG_SYS_GBL_DATA_OFFSET
CONFIG_SYS_GBL_DATA_SIZE
CONFIG_SYS_GIC400_ADDR
CONFIG_SYS_HELP_CMD_WIDTH
CONFIG_SYS_HIGH
CONFIG_SYS_HMI_BASE
-CONFIG_SYS_HOSTNAME
CONFIG_SYS_HRCW_HIGH
-CONFIG_SYS_HRCW_HIGH_BASE
CONFIG_SYS_HRCW_LOW
CONFIG_SYS_HZ_CLOCK
CONFIG_SYS_I2C
CONFIG_SYS_LOAD_ADDR
CONFIG_SYS_LOAD_ADDR2
CONFIG_SYS_LOW
-CONFIG_SYS_LOWBOOT
CONFIG_SYS_LOWMEM_BASE
CONFIG_SYS_LOW_RES_TIMER
CONFIG_SYS_LPAE_SDRAM_BASE
CONFIG_SYS_MAPLE
CONFIG_SYS_MAPLE_MEM_PHYS
CONFIG_SYS_MAPPED_RAM_BASE
-CONFIG_SYS_MARUBUN_IO
-CONFIG_SYS_MARUBUN_MRSHPC
-CONFIG_SYS_MARUBUN_MW1
-CONFIG_SYS_MARUBUN_MW2
CONFIG_SYS_MASTER_CLOCK
CONFIG_SYS_MATRIX_EBI0CSA_VAL
CONFIG_SYS_MATRIX_EBICSA_VAL
CONFIG_SYS_MCLINK_MAX
CONFIG_SYS_MCMEM0_VAL
CONFIG_SYS_MCMEM1_VAL
-CONFIG_SYS_MDC1_PIN
CONFIG_SYS_MDCNFG_VAL
-CONFIG_SYS_MDC_PIN
CONFIG_SYS_MDIO1_OFFSET
-CONFIG_SYS_MDIO1_PIN
CONFIG_SYS_MDIO_BASE_ADDR
-CONFIG_SYS_MDIO_PIN
CONFIG_SYS_MDMRS_VAL
CONFIG_SYS_MDREFR_VAL
CONFIG_SYS_MECR_VAL
CONFIG_SYS_NOR1_CSPR_EXT
CONFIG_SYS_NOR_AMASK
CONFIG_SYS_NOR_AMASK_EARLY
-CONFIG_SYS_NOR_BR_PRELIM
CONFIG_SYS_NOR_CSOR
CONFIG_SYS_NOR_CSPR
CONFIG_SYS_NOR_CSPR_EXT
CONFIG_SYS_NOR_FTIM1
CONFIG_SYS_NOR_FTIM2
CONFIG_SYS_NOR_FTIM3
-CONFIG_SYS_NOR_OR_PRELIM
CONFIG_SYS_NO_DCACHE
CONFIG_SYS_NS16550_CLK
CONFIG_SYS_NS16550_CLK_DIV
CONFIG_SYS_OR1_REMAP
CONFIG_SYS_OR6_64M
CONFIG_SYS_OR6_8M
-CONFIG_SYS_OR_TIMING_FLASH
CONFIG_SYS_OR_TIMING_MRAM
CONFIG_SYS_OSCIN_FREQ
CONFIG_SYS_OSD_DH
CONFIG_SYS_POST_WORD_ADDR
CONFIG_SYS_PPC_DDR_WIMGE
CONFIG_SYS_PQSPAR
-CONFIG_SYS_PRELIM_OR_AM
CONFIG_SYS_PROMPT_HUSH_PS2
CONFIG_SYS_PSDPAR
CONFIG_SYS_PSSR_VAL
CONFIG_SYS_PTDPAR
CONFIG_SYS_PTV
CONFIG_SYS_PUAPAR
-CONFIG_SYS_QE_FMAN_FW_IN_MMC
-CONFIG_SYS_QE_FMAN_FW_IN_NAND
-CONFIG_SYS_QE_FMAN_FW_IN_NOR
-CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
CONFIG_SYS_QE_FMAN_FW_LENGTH
CONFIG_SYS_QE_FW_ADDR
-CONFIG_SYS_QE_FW_IN_SPIFLASH
CONFIG_SYS_QMAN_CENA_BASE
CONFIG_SYS_QMAN_CENA_SIZE
CONFIG_SYS_QMAN_CINH_BASE
CONFIG_SYS_SDRAM_DRVSTRENGTH
CONFIG_SYS_SDRAM_DRV_STRENGTH
CONFIG_SYS_SDRAM_EMOD
-CONFIG_SYS_SDRAM_LOWER
CONFIG_SYS_SDRAM_MODE
CONFIG_SYS_SDRAM_SIZE
CONFIG_SYS_SDRAM_SIZE0
CONFIG_SYS_SDRAM_SIZE1
CONFIG_SYS_SDRAM_SIZE_LAW
-CONFIG_SYS_SDRAM_UPPER
CONFIG_SYS_SDRAM_VAL
CONFIG_SYS_SDRAM_VAL1
CONFIG_SYS_SDRAM_VAL10
CONFIG_SYS_USE_DATAFLASH_CS0
CONFIG_SYS_USE_DATAFLASH_CS1
CONFIG_SYS_USE_DATAFLASH_CS3
-CONFIG_SYS_USE_DSPLINK
CONFIG_SYS_USE_FLASH
CONFIG_SYS_USE_MAIN_OSCILLATOR
CONFIG_SYS_USE_MMC
CONFIG_TSECV2_1
CONFIG_TSEC_TBI
CONFIG_TSEC_TBICR_SETTINGS
-CONFIG_TUGE1
CONFIG_TULIP
CONFIG_TULIP_FIX_DAVICOM
CONFIG_TULIP_SELECT_MEDIA
CONFIG_TULIP_USE_IO
-CONFIG_TUXX1
CONFIG_TWL6030_INPUT
CONFIG_TWL6030_POWER
CONFIG_TWR
CONFIG_USB_OTG_BLACKLIST_HUB
CONFIG_USB_PHY_TYPE
CONFIG_USB_PXA25X_SMALL
-CONFIG_USB_R8A66597_HCD
CONFIG_USB_SERIALNO
CONFIG_USB_TI_CPPI_DMA
CONFIG_USB_TTY
CONFIG_VIDEO_VCXK
CONFIG_VID_FLS_ENV
CONFIG_VM86
-CONFIG_VME8349
CONFIG_VOIPAC_LCD
CONFIG_VOL_MONITOR_INA220
CONFIG_VOL_MONITOR_IR36021_READ
CONFIG_YAFFS_UTIL
CONFIG_YAFFS_WINCE
CONFIG_YELLOW_LED
-CONFIG_ZLIB
CONFIG_ZLT
CONFIG_ZM7300
-CONFIG_ZYNQMP_EEPROM
CONFIG_ZYNQ_HISPD_BROKEN
CONFIG_eTSEC_MDIO_BUS
#define HEADER_VERSION_V1 0x1
/* default option : bit0 => no signature */
#define HEADER_DEFAULT_OPTION (cpu_to_le32(0x00000001))
+/* default binary type for U-Boot */
+#define HEADER_TYPE_UBOOT (cpu_to_le32(0x00000000))
struct stm32_header {
uint32_t magic_number;
uint32_t option_flags;
uint32_t ecdsa_algorithm;
uint32_t ecdsa_public_key[64 / 4];
- uint32_t padding[84 / 4];
+ uint32_t padding[83 / 4];
+ uint32_t binary_type;
};
static struct stm32_header stm32image_header;
ptr->header_version[VER_MAJOR_IDX] = HEADER_VERSION_V1;
ptr->option_flags = HEADER_DEFAULT_OPTION;
ptr->ecdsa_algorithm = 1;
+ ptr->binary_type = HEADER_TYPE_UBOOT;
}
static uint32_t stm32image_checksum(void *start, uint32_t len)
le32_to_cpu(stm32hdr->image_checksum));
printf("Option : 0x%08x\n",
le32_to_cpu(stm32hdr->option_flags));
+ printf("BinaryType : 0x%08x\n",
+ le32_to_cpu(stm32hdr->binary_type));
}
static void stm32image_set_header(void *ptr, struct stat *sbuf, int ifd,
projects / oweals / u-boot.git / commitdiff