arm: udoo: Convert to distro config
authorMeul, Dirk <Dirk.Meul@rwth-aachen.de>
Sat, 13 Oct 2018 12:54:01 +0000 (12:54 +0000)
committerTom Rini <trini@konsulko.com>
Mon, 22 Oct 2018 13:18:49 +0000 (09:18 -0400)
Instead of keeping a custom environment, use a more generic approach
by switching to distro config.

Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
configs/udoo_defconfig
include/configs/udoo.h

index 52de8ca46c226420f48b34eeb65bcc30bc917b96..bfaef1381de08368d394016d9ce0fa5de5960010 100644 (file)
@@ -9,8 +9,10 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
 CONFIG_BOOTDELAY=3
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOARD_EARLY_INIT_F=y
index 985f306813b471e22c4ad9076df5268cab749098..3378b4a601c49f285fa74aa0e282370f5cb28de0 100644 (file)
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "script=boot.scr\0" \
-       "image=zImage\0" \
-       "console=ttymxc1\0" \
-       "splashpos=m,m\0" \
+       "console=ttymxc1,115200\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=undefined\0" \
+       "fdtfile=undefined\0" \
        "fdt_addr=0x18000000\0" \
-       "boot_fdt=try\0" \
+       "fdt_addr_r=0x18000000\0" \
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
-       "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-       "update_sd_firmware_filename=u-boot.imx\0" \
-       "update_sd_firmware=" \
-               "if test ${ip_dyn} = yes; then " \
-                       "setenv get_cmd dhcp; " \
-               "else " \
-                       "setenv get_cmd tftp; " \
-               "fi; " \
-               "if mmc dev ${mmcdev}; then "   \
-                       "if ${get_cmd} ${update_sd_firmware_filename}; then " \
-                               "setexpr fw_sz ${filesize} / 0x200; " \
-                               "setexpr fw_sz ${fw_sz} + 1; "  \
-                               "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-                       "fi; "  \
-               "fi\0" \
-       "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
-       "loadbootscript=" \
-               "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-               "source\0" \
-       "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-       "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-       "mmcboot=echo Booting from mmc ...; " \
-               "run mmcargs; " \
-               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-                       "if run loadfdt; then " \
-                               "bootz ${loadaddr} - ${fdt_addr}; " \
-                       "else " \
-                               "if test ${boot_fdt} = try; then " \
-                                       "bootz; " \
-                               "else " \
-                                       "echo WARN: Cannot load the DT; " \
-                               "fi; " \
-                       "fi; " \
-               "else " \
-                       "bootz; " \
-               "fi;\0" \
-       "netargs=setenv bootargs console=${console},${baudrate} " \
-               "root=/dev/nfs " \
-       "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-               "netboot=echo Booting from net ...; " \
-               "run netargs; " \
-               "if test ${ip_dyn} = yes; then " \
-                       "setenv get_cmd dhcp; " \
-               "else " \
-                       "setenv get_cmd tftp; " \
-               "fi; " \
-               "${get_cmd} ${image}; " \
-               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-                       "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-                               "bootz ${loadaddr} - ${fdt_addr}; " \
-                       "else " \
-                               "if test ${boot_fdt} = try; then " \
-                                       "bootz; " \
-                               "else " \
-                                       "echo WARN: Cannot load the DT; " \
-                               "fi; " \
-                       "fi; " \
-               "else " \
-                       "bootz; " \
-               "fi;\0" \
-               "findfdt=" \
-                       "if test $board_rev = MX6Q ; then " \
-                               "setenv fdt_file imx6q-udoo.dtb; fi; " \
-                       "if test $board_rev = MX6DL ; then " \
-                               "setenv fdt_file imx6dl-udoo.dtb; fi; " \
-                       "if test $fdt_file = undefined; then " \
-                               "echo WARNING: Could not determine dtb to use; fi; \0"
-
-#define CONFIG_BOOTCOMMAND \
-          "run findfdt; " \
-          "mmc dev ${mmcdev}; if mmc rescan; then " \
-                  "if run loadbootscript; then " \
-                          "run bootscript; " \
-                  "else " \
-                          "if run loadimage; then " \
-                                  "run mmcboot; " \
-                          "else run netboot; " \
-                          "fi; " \
-                  "fi; " \
-          "else run netboot; fi"
+       "mmcrootfstype=ext4\0" \
+       "findfdt="\
+               "if test ${board_rev} = MX6Q; then " \
+                       "setenv fdtfile imx6q-udoo.dtb; fi; " \
+               "if test ${board_rev} = MX6DL; then " \
+                       "setenv fdtfile imx6dl-udoo.dtb; fi; " \
+               "if test ${fdtfile} = undefined; then " \
+                       "echo WARNING: Could not determine dtb to use; fi\0" \
+       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+       "ramdisk_addr_r=0x13000000\0" \
+       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+       BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
+       func(SATA, sata, 0) \
+       func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR