armv8/ls1043aqds: add DSPI support

Enable three DSPI flash memories on board.

Commands:
=> sf probe 1:0
SF: Detected N25Q128A with page size 256 Bytes,
				erase size 64 KiB, total 16 MiB
=> sf probe 1:1
SF: Detected SST25WF040B with page size 256 Bytes,
				erase size 4 KiB, total 512 KiB
=> sf probe 1:2
SF: Detected EN25S64 with page size 256 Bytes,
				erase size 64 KiB, total 8 MiB

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index 1fd530da5acea07a59563d9fc102a93c66fcc6c4..f7113c5a0c4d71579408570523c1078ba765c1d1 100644 (file)
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -4,3 +4,6 @@ CONFIG_TARGET_LS1043AQDS=y
 CONFIG_SYS_NS16550=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
 CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y

diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index e9d5afd43ae4f1313298d55a7eacb8152b5e5cb2..8d4370fdcceba5fa71abc5c7c27d3868d613a56b 100644 (file)
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -3,3 +3,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043AQDS=y
 CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y

diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 5221ddb4344e218386c0f5d944c3c7380aebdaff..bc7699698ab01d7a260c6709465f59463bb5fd2f 100644 (file)
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -1,3 +1,8 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043AQDS=y
 CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y

diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index 6765d3dc685b330ceb67376bad62ce5d5a942ca1..0409e33f1ba6417d6e2a6fe6b6cef01644cbfa96 100644 (file)
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -3,3 +3,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043AQDS=y
 CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index e80ac27135192d1d82aa0e9593219167afc0138b..35d97508a8b424172b322ccb3463516288f3224c 100644 (file)
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -197,6 +197,18 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
+/*  DSPI  */
+#define CONFIG_FSL_DSPI
+#ifdef CONFIG_FSL_DSPI
+#define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO       /* cs0 */
+#define CONFIG_SPI_FLASH_SST           /* cs1 */
+#define CONFIG_SPI_FLASH_EON           /* cs2 */
+#define CONFIG_SF_DEFAULT_BUS          1
+#define CONFIG_SF_DEFAULT_CS           0
+#endif
+
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 
 /* FMan ucode */

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index dbdcc515ea4ae6082499d9864dc003e158f20709..506f50d8955dc33623e9f927af0d6ffbf6a4a2e7 100644 (file)
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -222,16 +222,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
-/* DSPI */
-#define CONFIG_FSL_DSPI
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_CMD_SF
-#define CONFIG_DM_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_BUS          1
-#define CONFIG_SF_DEFAULT_CS           0
-#endif
-
 /*
  * Environment
  */