This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
bool "Support colibri_pxa270"
select CPU_PXA
-config TARGET_JORNADA
- bool "Support jornada"
- select CPU_SA1100
-
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
select CPU_V7
source "board/icpdas/lp8x4x/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep0033/Kconfig"
-source "board/jornada/Kconfig"
source "board/karo/tx25/Kconfig"
source "board/maxbcm/Kconfig"
source "board/mpl/vcma9/Kconfig"
+++ /dev/null
-if TARGET_JORNADA
-
-config SYS_BOARD
- default "jornada"
-
-config SYS_CONFIG_NAME
- default "jornada"
-
-endif
+++ /dev/null
-JORNADA BOARD
-M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
-S: Maintained
-F: board/jornada/
-F: include/configs/jornada.h
-F: configs/jornada_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# 2004 (c) MontaVista Software, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := jornada.o
-obj-y += setup.o
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-int board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_JORNADA720;
- gd->bd->bi_boot_params = 0xc0000100;
-
-
- /*
- * Turn on flashing.
- * Would be nice to have some protection but
- * that would have to be implemented in the
- * flash init function, which isnt possible yet.
- */
- PPSR |= (1 << 7);
- PPDR |= (1 << 7);
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-
- return (0);
-}
+++ /dev/null
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- * 2004 (c) MontaVista Software, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
-/*-----------------------------------------------------------------------
- * Board defines:
- */
-
-#define MDCNFG 0x00
-#define MDCAS00 0x04
-#define MDCAS01 0x08
-#define MDCAS02 0x0C
-#define MSC0 0x10
-#define MSC1 0x14
-#define MECR 0x18
-#define MDREFR 0x1C
-#define MDCAS20 0x20
-#define MDCAS21 0x24
-#define MDCAS22 0x28
-#define MSC2 0x2C
-#define SMCNFG 0x30
-
-#define GPDR 0x04
-#define GPSR 0x08
-#define GPCR 0x0C
-#define GAFR 0x1C
-
-#define PPDR 0x00
-#define PPSR 0x04
-#define PPAR 0x08
-
-#define MDREFR_TRASR(n_) (n_ & (0x0000000f))
-#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4)
-#define MDREFR_K0DB2 (1 << 18)
-#define MDREFR_K1DB2 (1 << 22)
-#define MDREFR_K2DB2 (1 << 26)
-
-#define MDREFR_K0RUN (1 << 17)
-#define MDREFR_K1RUN (1 << 21)
-#define MDREFR_K2RUN (1 << 25)
-
-#define MDREFR_SLFRSH (1 << 31)
-#define MDREFR_E1PIN (1 << 20)
-
-#define PSSR 0x04
-#define PSSR_DH 0x00000008
-#define POSR 0x08
-#define RCSR 0x04
-
-/*-----------------------------------------------------------------------
- * Setup parameters for the board:
- */
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-PWR_BASE: .word 0x90020000
-RST_BASE: .long 0x90030000
-PPC_BASE: .long 0x90060000
-GPIO_BASE: .long 0x90040000
-IC_BASE: .word 0x90050000
-
-cpuspeed: .word 0xa0
-/* calculated from old blob bootloader */
-mdcnfg: .long 0x00037267 /* mdcnfg 0x00037267 */
-mdcas00: .long 0x5555557f /* mdcas00 0x5555557f */
-mdcas01: .long 0x55555555 /* mdcas01 0x55555555 */
-mdcas02: .long 0x55555555 /* mdcas02 0x55555555 */
-msc0: .long 0xfff04f78 /* msc0 0xfff04f78 */
-msc1: .long 0xfff8fff0 /* msc1 0xfff8fff0 */
-mecr: .long 0x98c698c6 /* mecr 0x98c698c6 */
-mdrefr: .long 0x067600c7 /* mdrefr 0x04340327 */
-mdcas20: .long 0xd1284142 /* mdcas20 0xd1284142 */
-mdcas21: .long 0x72249529 /* mdcas21 0x72249529 */
-mdcas22: .long 0x78414351 /* mdcas22 0x78414351 */
-msc2: .long 0x201d2959 /* msc2 0x201d2959 */
-smcnfg: .long 0x00000000 /* smcnfg 0x00000000 */
-
-pin_set_out: .long 0x37ff70
-pin_set_dir: .long 0x11480
-
-gpdr_set: .long 0x0B3A0900
-gpsr_set: .long 0x02100800
-gpcr_set: .long 0x092A0100
-gafr_set: .long 0x08600000
-
-.globl lowlevel_init
-lowlevel_init:
-
-
- /* this is required for flashing */
- ldr r0, PPC_BASE
- ldr r1, pin_set_out
- str r1, [r0, #PPSR]
- ldr r1, pin_set_dir
- str r1, [r0, #PPDR]
-
- /* Setting up the memory and stuff */
- /***********************************/
-
- ldr r0, MEM_BASE
-
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
- ldr r1, mdcas00
- str r1, [r0, #MDCAS00]
- ldr r1, mdcas01
- str r1, [r0, #MDCAS01]
- ldr r1, mdcas02
- str r1, [r0, #MDCAS02]
- ldr r1, mdcas20
- str r1, [r0, #MDCAS20]
- ldr r1, mdcas21
- str r1, [r0, #MDCAS21]
- ldr r1, mdcas22
- str r1, [r0, #MDCAS22]
-
- /* clear kxDB2 */
- ldr r2, [r0, #MDREFR]
- bic r2, r2, #MDREFR_K0DB2
- bic r2, r2, #MDREFR_K1DB2
- bic r2, r2, #MDREFR_K2DB2
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_TRASR(7)
-
- mov r4, #0x2000
- spin: subs r4, r4, #1
- bne spin
-
- ldr r1, PWR_BASE
- mov r2, #PSSR_DH
- str r2, [r1, #PSSR]
-
- ldr r2, [r0, #MDREFR]
- bic r2, r2, #MDREFR_K0DB2
- bic r2, r2, #MDREFR_K1DB2
- bic r2, r2, #MDREFR_K2DB2
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_TRASR(7)
- orr r2, r2, #MDREFR_DRI(12)
- orr r2, r2, #MDREFR_K0DB2
- orr r2, r2, #MDREFR_K1DB2
- orr r2, r2, #MDREFR_K2DB2
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_K0RUN
- orr r2, r2, #MDREFR_K1RUN
- orr r2, r2, #MDREFR_K2RUN
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- bic r2, r2, #MDREFR_SLFRSH
- str r2, [r0, #MDREFR]
-
- ldr r2, [r0, #MDREFR]
- orr r2, r2, #MDREFR_E1PIN
- str r2, [r0, #MDREFR]
-
- ldr r2, MEM_START
-.rept 8
- ldr r3, [r2]
-.endr
-
- ldr r2, [r0, #MDCNFG]
- orr r2, r2, #0x00000003
- orr r2, r2, #0x00030000
- str r2, [r0, #MDCNFG]
-
- ldr r1, msc0
- str r1, [r0, #MSC0]
- ldr r1, msc1
- str r1, [r0, #MSC1]
- ldr r1, msc2
- str r1, [r0, #MSC2]
- ldr r1, smcnfg
- str r1, [r0, #SMCNFG]
- ldr r1, mecr
- str r1, [r0, #MECR]
-
- mov pc, lr
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_TARGET_JORNADA=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_MISC is not set
-CONFIG_SYS_PROMPT="HP Jornada# "
+++ /dev/null
-/*
- * Copyright 2010 (C)
- * Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1110 1 /* This is an SA110 CPU */
-#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */
-#define CONFIG_SYS_FLASH_PROTECTION 1
-
-#define CONFIG_SYS_TEXT_BASE 0xC1F00000
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/* Console setting */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL 1
-#define CONFIG_SERIAL3 1 /* we use serial 3 */
-#define CONFIG_BAUDRATE 19200
-#define CONFIG_LOADS_ECHO 1
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1"
-#define CONFIG_BOOTCOMMAND "run boot_kernel"
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-#define CONFIG_SYS_LOAD_ADDR 0xc0000000
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* console buffsize */
-#define CONFIG_SYS_PBSIZE (256+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */
-#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */
-#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_ERASE_TOUT (4096)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (4096)
-#define CONFIG_SYS_FLASH_INCREMENT 0x02000000
-#define PHYS_FLASH_1 0x00000000 /* starts at 0x0 */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256KB Sectors */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 260
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-#define CONFIG_FLASH_SHOW_PROGRESS 1
-
-/* Environment */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x00040000
-#define CONFIG_ENV_OFFSET 0x00040000
-#define CONFIG_ENV_SIZE 0x00040000
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- Monitor - 0x00000000 - 0x00040000 (256kb)
- Environment - 0x00040000 - 0x00080000 (256kb)
- Kernel - 0x00080000 - 0x00380000 (3mb)
- Rootfs - 0x00380000 - 0x........ (rest)
-*/
-
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_INIT_SP_ADDR 0x0
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2 0xc4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=jornada7xx-0"
-#define MTDPARTS_DEFAULT "mtdparts=jornada7xx-0:256k(u-boot),256k(env),"\
- "3m(kernel),-(user);"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "flash_kernel=protect off all; " \
- "erase 00080000 0037ffff;cp.b c0000000 00080000 00300000;\0" \
- "flash_uboot=protect off all; " \
- "erase 00000000 0003ffff;cp.b c0000000 00000000 00040000;\0" \
- "boot_kernel=cp.b 00080000 c0000000 00300000;bootm;\0"
-#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff