/*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
-#include <pci.h>
#ifdef CONFIG_SDRAM_BANK0
-#define MAGIC0 0x00000000
-#define MAGIC1 0x11111111
-#define MAGIC2 0x22222222
-#define MAGIC3 0x33333333
-#define MAGIC4 0x44444444
-#define MAGIC5 0x55555555
-#define MAGIC6 0x66666666
+#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-#define ADDR_ZERO 0x00000000
-#define ADDR_400 0x00000400
-#define ADDR_01MB 0x00100000
-#define ADDR_08MB 0x00800000
-#define ADDR_16MB 0x01000000
-#define ADDR_32MB 0x02000000
-#define ADDR_64MB 0x04000000
-#define ADDR_128MB 0x08000000
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+struct sdram_conf_s {
+ unsigned long size;
+ unsigned long reg;
+};
+
+typedef struct sdram_conf_s sdram_conf_t;
+
+sdram_conf_t mb0cf[] = {
+ {(128 << 20), 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
+ {(64 << 20), 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
+ {(32 << 20), 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
+ {(16 << 20), 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
+ {(4 << 20), 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
+};
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-/*-----------------------------------------------------------------------
- */
void sdram_init(void)
{
- ulong speed;
ulong sdtr1;
ulong rtr;
-
- /*
- * Determine SDRAM speed
- */
- speed = get_bus_freq(0); /* parameter not used on ppc4xx */
+ int i;
/*
* Support for 100MHz and 133MHz SDRAM
*/
- if (speed > 100000000) {
+ if (get_bus_freq(0) > 100000000) {
/*
* 133 MHz SDRAM
*/
rtr = 0x05f00000;
}
- /*
- * Disable memory controller.
- */
- mtsdram0(mem_mcopt1, 0x00000000);
-
- /*
- * Set MB0CF for bank 0. (0-128MB) Address Mode 3 since 13x10(4)
- */
- mtsdram0(mem_mb0cf, 0x000A4001);
-
- mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, rtr);
-
- /*
- * Wait for 200us
- */
- udelay(200);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram0(mem_mcopt1, 0x80800000);
-
- /*
- * Wait for 10ms
- */
- udelay(10000);
-
- /*
- * Test if 128 MByte are equipped (mirror test)
- */
- *(volatile ulong *)ADDR_ZERO = MAGIC0;
- *(volatile ulong *)ADDR_08MB = MAGIC1;
- *(volatile ulong *)ADDR_16MB = MAGIC2;
- *(volatile ulong *)ADDR_32MB = MAGIC3;
- *(volatile ulong *)ADDR_64MB = MAGIC4;
-
- if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
- (*(volatile ulong *)ADDR_08MB == MAGIC1) &&
- (*(volatile ulong *)ADDR_16MB == MAGIC2) &&
- (*(volatile ulong *)ADDR_32MB == MAGIC3)) {
+ for (i=0; i<N_MB0CF; i++) {
/*
- * OK, 128MB detected -> all done
+ * Disable memory controller.
*/
- return;
- }
+ mtsdram0(mem_mcopt1, 0x00000000);
- /*
- * Now test for 64 MByte...
- */
-
- /*
- * Disable memory controller.
- */
- mtsdram0(mem_mcopt1, 0x00000000);
-
- /*
- * Set MB0CF for bank 0. (0-64MB) Address Mode 3 since 13x9(4)
- */
- mtsdram0(mem_mb0cf, 0x00084001);
-
- mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, rtr);
-
- /*
- * Wait for 200us
- */
- udelay(200);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram0(mem_mcopt1, 0x80800000);
-
- /*
- * Wait for 10ms
- */
- udelay(10000);
-
- /*
- * Test if 64 MByte are equipped (mirror test)
- */
- *(volatile ulong *)ADDR_ZERO = MAGIC0;
- *(volatile ulong *)ADDR_08MB = MAGIC1;
- *(volatile ulong *)ADDR_16MB = MAGIC2;
- *(volatile ulong *)ADDR_32MB = MAGIC3;
-
- if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
- (*(volatile ulong *)ADDR_08MB == MAGIC1) &&
- (*(volatile ulong *)ADDR_16MB == MAGIC2)) {
/*
- * OK, 64MB detected -> all done
+ * Set MB0CF for bank 0.
*/
- return;
- }
+ mtsdram0(mem_mb0cf, mb0cf[i].reg);
+ mtsdram0(mem_sdtr1, sdtr1);
+ mtsdram0(mem_rtr, rtr);
- /*
- * Now test for 32 MByte...
- */
-
- /*
- * Disable memory controller.
- */
- mtsdram0(mem_mcopt1, 0x00000000);
-
- /*
- * Set MB0CF for bank 0. (0-32MB) Address Mode 2 since 12x9(4)
- */
- mtsdram0(mem_mb0cf, 0x00062001);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram0(mem_mcopt1, 0x80800000);
-
- /*
- * Wait for 10ms
- */
- udelay(10000);
-
- /*
- * Test if 32 MByte are equipped (mirror test)
- */
- *(volatile ulong *)ADDR_ZERO = MAGIC0;
- *(volatile ulong *)ADDR_400 = MAGIC1;
- *(volatile ulong *)ADDR_08MB = MAGIC2;
- *(volatile ulong *)ADDR_16MB = MAGIC3;
+ udelay(200);
- if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
- (*(volatile ulong *)ADDR_400 == MAGIC1) &&
- (*(volatile ulong *)ADDR_08MB == MAGIC2)) {
/*
- * OK, 32MB detected -> all done
+ * Set memory controller options reg, MCOPT1.
+ * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
+ * read/prefetch.
*/
- return;
- }
+ mtsdram0(mem_mcopt1, 0x80800000);
- /*
- * Now test for 16 MByte...
- */
- /*
- * Disable memory controller.
- */
- mtsdram0(mem_mcopt1, 0x00000000);
-
- /*
- * Set MB0CF for bank 0. (0-16MB) Address Mode 4 since 12x8(4)
- */
- mtsdram0(mem_mb0cf, 0x00046001);
+ udelay(10000);
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram0(mem_mcopt1, 0x80800000);
-
- /*
- * Wait for 10ms
- */
- udelay(10000);
-
- /*
- * Test if 16 MByte are equipped (mirror test)
- */
- *(volatile ulong *)ADDR_ZERO = MAGIC0;
- *(volatile ulong *)ADDR_400 = MAGIC1;
- *(volatile ulong *)ADDR_01MB = MAGIC5;
- *(volatile ulong *)ADDR_08MB = MAGIC2;
-/* *(volatile ulong *)ADDR_16MB = MAGIC3;*/
-
- if ((*(volatile ulong *)ADDR_ZERO == MAGIC0) &&
- (*(volatile ulong *)ADDR_400 == MAGIC1) &&
- (*(volatile ulong *)ADDR_01MB == MAGIC5) &&
- (*(volatile ulong *)ADDR_08MB == MAGIC2)) {
- /*
- * OK, 16MB detected -> all done
- */
- return;
+ if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+ /*
+ * OK, size detected -> all done
+ */
+ return;
+ }
}
-
- /*
- * Setup for 4 MByte...
- */
-
- /*
- * Disable memory controller.
- */
- mtsdram0(mem_mcopt1, 0x00000000);
-
- /*
- * Set MB0CF for bank 0. (0-4MB) Address Mode 5 since 11x8(2)
- */
- mtsdram0(mem_mb0cf, 0x00008001);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram0(mem_mcopt1, 0x80800000);
-
- /*
- * Wait for 10ms
- */
- udelay(10000);
}
#endif /* CONFIG_SDRAM_BANK0 */
projects / oweals / u-boot.git / commitdiff