x86: Use TEXT_BASE in linker scripts

Use TEXT_BASE rather than a hard-coded base address on x86 linker scripts.
This will allow any board to define its base link address without having
to modify the linker script

diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds
index 7b0ffaa6cc85a2d2b0098da4956636c15dcae3d0..d78d75f2c5992b35d3718d26f3dfdf8a1a1fcd60 100644 (file)
--- a/board/eNET/u-boot.lds
+++ b/board/eNET/u-boot.lds
@@ -27,7 +27,7 @@ ENTRY(_start)
 
 SECTIONS
 {
-       . = 0x06000000;         /* Location of bootcode in flash */
+       . = TEXT_BASE;          /* Location of bootcode in flash */
        _i386boot_text_start = .;
        .text  : { *(.text); }
 
@@ -98,12 +98,12 @@ SECTIONS
         * The fff0 offset of resetvec is important, however.
         */
        . = 0xfffffe00;
-       .start32 : AT (0x0603fe00) { *(.start32); }
+       .start32 : AT (TEXT_BASE + 0x3fe00) { *(.start32); }
 
        . = 0xf800;
-       .start16 : AT (0x0603f800) { *(.start16); }
+       .start16 : AT (TEXT_BASE + 0x3f800) { *(.start16); }
 
        . = 0xfff0;
-       .resetvec : AT (0x0603fff0) { *(.resetvec); }
+       .resetvec : AT (TEXT_BASE + 0x3fff0) { *(.resetvec); }
        _i386boot_end = (LOADADDR(.resetvec) + SIZEOF(.resetvec) );
 }