+++ /dev/null
-EXTRA_DIST = README.Debian changelog conffiles control copyright dirs docs info init.d postinst rules shlibs
+++ /dev/null
-tinc for Debian
-----------------------
-
-The manual for tinc is also available as info pages, type `info tinc'
-to read it.
-
-The system startup script for tinc, /etc/init.d/tinc, uses the file
-/etc/tinc/nets.boot to find out which networks have to be started.
-
- -- Ivo Timmermans <itimmermans@bigfoot.com>, Wed, 31 May 2000, 19:56:05 +0200
+++ /dev/null
-tinc (1.0pre3-0.1) unstable; urgency=low
-
- * upgraded to upstream version 1.0pre3
-
- -- Ivo Timmermans <itimmermans@bigfoot.com> Sun, 25 Jun 2000 00:00:00 +0200
-
-tinc (1.0pre2-1) unstable; urgency=low
-
- * postinst creates a file /etc/tinc/nets.boot, containing all networks
- to be started upon system startup;
- * init.d script starts all networks from that list.
- * postinst script creates tap devices
-
- -- Ivo Timmermans <itimmermans@bigfoot.com> Tue, 16 May 2000 00:06:25 +0200
-
-tinc (1.0pre1-0.4) unstable; urgency=low
-
- * postinst script
-
- -- Ivo Timmermans <itimmermans@bigfoot.com> Mon, 15 May 2000 19:22:05 +0200
-
-tinc (1.0pre1-0.3) unstable; urgency=low
-
- * system startup script
-
- -- Ivo Timmermans <itimmermans@bigfoot.com> Sun, 14 May 2000 22:58:02 +0200
-
-tinc (1.0pre1-0.2) unstable; urgency=low
-
- * Included the blowfish license
-
- -- Ivo Timmermans <itimmermans@bigfoot.com> Fri, 21 Apr 2000 17:07:50 +0200
-
-tinc (1.0pre1-0.1) unstable; urgency=low
-
- * Initial Release.
-
- -- Ivo Timmermans <itimmermans@bigfoot.com> Fri, 21 Apr 2000 17:07:50 +0200
-
-Local variables:
-mode: debian-changelog
-End:
+++ /dev/null
-/etc/tinc/example/tinc.conf
-/etc/init.d/tinc
+++ /dev/null
-Source: tinc
-Section: non-US/main
-Priority: optional
-Maintainer: Ivo Timmermans <itimmermans@bigfoot.com>
-Standards-Version: 3.0.1
-Build-Depends: libc6-dev, libssl095a-dev, autoconf (>= 2.12), automake,
-
-Package: tinc
-Architecture: i386
-Depends: ${shlibs:Depends}, (libssl095a|libssl09), perl5
-Description: Virtual Private Network daemon
- tinc is a daemon with which you can create a virtual private network
- (VPN). One daemon can handle multiple connections, so you can
- create an entire (moderately sized) VPN with only one daemon per
- participating computer.
- .
- You need to have two kernel modules installed, the manual will
- explain you how to do that.
+++ /dev/null
-This package was debianized by Ivo Timmermans <itimmermans@bigfoot.com> on
-Fri, 21 Apr 2000 17:07:50 +0200.
-
-It was downloaded from http://tinc.nl.linux.org/
-
-Upstream Author(s):
- Ivo Timmermans <itimmermans@bigfoot.com>
- Guus Sliepen <guus@sliepen.warande.net>
-
-Copyright: GPL version 2. On Debian GNU/Linux systems, the complete
-text of the GNU General Public License can be found in
-/usr/share/common-licenses/GPL.
-
-The blowfish library is from the libssl package by Eric Young. The
-copyright notice for this library follows.
-
-----------------------------------------------------------------------
-Copyright (C) 1995-1997 Eric Young (eay@mincom.oz.au)
-All rights reserved.
-
-This package is an Blowfish implementation written
-by Eric Young (eay@mincom.oz.au).
-
-This library is free for commercial and non-commercial use as long as
-the following conditions are aheared to. The following conditions
-apply to all code found in this distribution.
-
-Copyright remains Eric Young's, and as such any Copyright notices in
-the code are not to be removed.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the copyright
- notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-3. All advertising materials mentioning features or use of this software
- must display the following acknowledgement:
- This product includes software developed by Eric Young (eay@mincom.oz.au)
-
-THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
-The license and distribution terms for any publically available version or
-derivative of this code cannot be changed. i.e. this code cannot simply be
-copied and put under another distrubution license
-[including the GNU Public License.]
-
-The reason behind this being stated in this direct manner is past
-experience in code simply being copied and the attribution removed
-from it and then being distributed as part of other packages. This
-implementation was a non-trivial and unpaid effort.
+++ /dev/null
-etc/tinc
-etc/tinc/example
-etc/tinc/example/passphrases
+++ /dev/null
-INSTALL
-NEWS
-README
+++ /dev/null
-doc/tinc.info
+++ /dev/null
-#! /usr/bin/perl -w
-#
-# System startup script for tinc
-# $Id: init.d,v 1.15 2000/10/18 20:12:06 zarq Exp $
-#
-# Based on Lubomir Bulej's Redhat init script.
-#
-# Create a file $NETSFILE (/etc/tinc/nets.boot), and put all the names of
-# the networks in there. These names must be valid directory names under
-# $TCONF (/etc/tinc). Lines starting with a # will be ignored in this
-# file.
-#
-
-my $DAEMON="/usr/sbin/tincd";
-my $NAME="tinc";
-my $DESC="tinc daemons";
-my $TCONF="/etc/tinc";
-my $EXTRA="";
-my $NETSFILE="$TCONF/nets.boot";
-my @NETS=();
-
-
-if (! -f $DAEMON) { exit 0; }
-
-
-
-sub find_nets {
- if(! open(FH, $NETSFILE)) {
- warn "Please create $NETSFILE.\n";
- exit 0;
- }
- while (<FH>) {
- chomp;
- if( /^[ ]*([^ \#]+)/i ) {
- push(@NETS, "$1");
- }
- }
- if($#NETS == -1) {
- warn "$NETSFILE doesn't contain any nets.\n";
- exit 0;
- }
-
-}
-
-
-##############################################################################
-# vpn_load () Loads VPN configuration
-#
-# $_[0] ... VPN to load
-
-sub vpn_load {
- my @addr;
- $CFG="$TCONF/$_[0]/tinc.conf";
- if(! open($CFG, "< $CFG")) {
- warn "tinc: $CFG does not exist\n";
- return 0;
- }
-
- # load TINCD config
- while(<$CFG>) {
- if( /^[ ]*TapDevice[ =]+([^ \#]+)/i ) {
- $DEV=$1;
- chomp($DEV);
- $DEV =~ s/^.*\/([^\/0-9]+)([0-9]+)$/$1$2/;
- $NUM = $2;
- } elsif ( /^[ ]*(MyOwnVPNIP|MyVirtualIP)[ =]+([^ \#]+)/i ) {
- $VPN=$2;
- chomp($VPN);
- } elsif ( /^[ ]*VpnMask[ =]+([^ \#]+)/i ) {
- $VPNMASK=$1;
- chomp($VPNMASK);
- }
- }
- if(!defined($DEV)) {
- warn "tinc: There must be a TapDevice\n";
- return 0;
- }
- if($DEV eq "") {
- warn "tinc: TapDevice should be of the form /dev/tapN\n";
- return 0;
- }
- if(!defined($VPN)) {
- warn "tinc: MyVirtualIP required\n";
- return 0;
- }
- if($VPN eq "") {
- warn "tinc: No argument to MyVirtualIP/MyOwnVPNIP\n";
- return 0;
- }
- if(defined($VPNMASK) && $VPNMASK eq "") {
- warn "tinc: Invalid argument to VpnMask\n";
- return 0;
- }
-
- $ADR = $VPN;
- $ADR =~ s/^([^\/]+)\/.*$/$1/;
- $LEN = $VPN;
- $LEN =~ s/^.*\/([^\/]+)$/$1/;
- if($ADR eq "" || $LEN eq "") {
- warn "tinc: Badly formed MyVirtualIP/MyOwnVPNIP\n";
- return 0;
- }
- @addr = split(/\./, $ADR);
-
- $ADR = pack('C4', @addr);
- $MSK = pack('N4', -1 << (32 - $LEN));
- $BRD = join(".", unpack('C4', $ADR | ~$MSK));
- $MAC = "fe:fd:" . join(":", map { sprintf "%02x", $_ } unpack('C4', $ADR));
-
- if(!defined($VPNMASK)) {
- $VPNMASK = $MSK;
- $VPNMASK = join(".", unpack('C4', $VPNMASK));
- }
- $ADR = join(".", unpack('C4', $ADR));
- $MSK = join(".", unpack('C4', $MSK));
-
- 1;
-}
-
-
-##############################################################################
-# vpn_start () starts specified VPN
-#
-# $_[0] ... VPN to start
-
-sub vpn_start {
- vpn_load($_[0]) || return 0;
-
- system("insmod ethertap -s --name=\"ethertap$NUM\" unit=\"$NUM\" >/dev/null");
- system("ifconfig $DEV hw ether $MAC");
- system("ifconfig $DEV $ADR netmask $VPNMASK broadcast $BRD mtu 1448 -arp");
- system("start-stop-daemon --start --quiet --pidfile /var/run/$NAME.$_[0].pid --exec $DAEMON -- -n $_[0] $EXTRA");
-}
-
-
-
-
-##############################################################################
-# vpn_stop () Stops specified VPN
-#
-# $_[0] ... VPN to stop
-
-sub vpn_stop {
- vpn_load($_[0]) || return 1;
-
- system("start-stop-daemon --stop --quiet --pidfile /var/run/$NAME.$_[0].pid --exec $DAEMON -- -n $_[0] $EXTRA -k");
-
- system("ifconfig $DEV down");
- system("rmmod ethertap$NUM -s");
-}
-
-
-if(!defined($ARGV[0])) {
- die "Usage: /etc/init.d/$NAME {start|stop|restart|force-reload}\n";
-}
-
-if($ARGV[0] eq "start") {
- find_nets;
- print "Starting $DESC:";
- foreach $n (@NETS) {
- print " $n";
- vpn_start($n);
- }
- print ".\n";
-} elsif ($ARGV[0] eq "stop") {
- find_nets;
- print "Stopping $DESC:";
- foreach $n (@NETS) {
- print " $n";
- vpn_stop($n);
- }
- print ".\n";
-} elsif ($ARGV[0] eq "restart" || $ARGV[0] eq "force-reload") {
- find_nets;
- print "Stopping $DESC:";
- foreach $n (@NETS) {
- print " $n";
- vpn_stop($n);
- }
- print ".\n";
- print "Starting $DESC:";
- foreach $n (@NETS) {
- print " $n";
- vpn_start($n);
- }
- print ".\n";
-} else {
- die "Usage: /etc/init.d/$NAME {start|stop|restart|force-reload}\n";
-}
+++ /dev/null
-#! /bin/sh
-# postinst script for tinc
-#
-# $Id: postinst,v 1.6 2000/05/21 23:01:28 zarq Exp $
-#
-# see: dh_installdeb(1)
-
-TCONF="/etc/tinc"
-NETSFILE="$TCONF/nets.boot"
-
-set -e
-
-# summary of how this script can be called:
-# * <postinst> `configure' <most-recently-configured-version>
-# * <old-postinst> `abort-upgrade' <new version>
-# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-# <new-version>
-# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-# <failed-install-package> <version> `removing'
-# <conflicting-package> <version>
-# for details, see /usr/doc/packaging-manual/
-#
-# quoting from the policy:
-# Any necessary prompting should almost always be confined to the
-# post-installation script, and should be protected with a conditional
-# so that unnecessary prompting doesn't happen if a package's
-# installation fails and the `postinst' is called with `abort-upgrade',
-# `abort-remove' or `abort-deconfigure'.
-
-case "$1" in
- configure)
- if [ ! -e /dev/.devfs ] ; then
- devices_exist=1
- for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ; do
- test -e /dev/tap$d || devices_exist=0
- done
- if [ $devices_exist -eq 0 ] ; then
- cd /dev && ./MAKEDEV netlink || true
- fi
- fi
-
- if [ ! -e $NETSFILE ] ; then
- echo "## This file contains all names of the networks to be started on system startup." > $NETSFILE
- fi
- ;;
-
- abort-upgrade|abort-remove|abort-deconfigure)
-
- ;;
-
- *)
- echo "postinst called with unknown argument \`$1'" >&2
- exit 0
- ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-
+++ /dev/null
-#!/usr/bin/make -f
-# Sample debian/rules that uses debhelper.
-# GNU copyright 1997 to 1999 by Joey Hess.
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-# This is the debhelper compatability version to use.
-export DH_COMPAT=1
-
-build: build-stamp
-build-stamp:
- dh_testdir
-
- ./configure --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --sysconfdir=/etc
- $(MAKE)
-
- touch build-stamp
-
-clean:
- dh_testdir
- dh_testroot
- rm -f build-stamp
-
- -$(MAKE) distclean
-
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_clean -k
- dh_installdirs
-
- $(MAKE) install DESTDIR=`pwd`/debian/tmp
- mkdir -p `pwd`/debian/tmp/etc/tinc/example
- cp doc/tinc.conf.sample `pwd`/debian/tmp/etc/tinc/example/tinc.conf
- ln -s /usr/share/doc/tinc/README.Debian `pwd`/debian/tmp/etc/tinc/example/README
- rm -f `pwd`/debian/tmp/usr/lib/tinc/libblowfish.so
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-# dh_testversion
- dh_testdir
- dh_testroot
-# dh_installdebconf
- dh_installdocs
- dh_installexamples
-# dh_installmenu
-# dh_installemacsen
-# dh_installpam
- dh_installinit
-# dh_installcron
- dh_installmanpages
- dh_installinfo
-# dh_undocumented
- dh_installchangelogs ChangeLog
- dh_link
- dh_strip
- dh_compress
- dh_fixperms
-# # You may want to make some executables suid here.
-# dh_suidregister
-# dh_makeshlibs
- dh_installdeb
-# dh_perl
- dh_shlibdeps
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
+++ /dev/null
-libblowfish 0 libc6
projects / oweals / tinc.git / commitdiff