Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Shlomo Kut, 29 Mar 2004:
+ Add support for MKS Instruments "Quantum" board
+
+* Fix build problem with Cogent boards;
+ avoid using <asm/byteorder.h> when using the host compiler
+
* Patch by Ganapathi C, 04 Aug 2004:
Fix NFS timeout issue
#########################################################################
LIST_8xx=" \
- Adder87x GENIETV MBX860T RBC823 \
- AdderII GTH MHPC rmu \
- ADS860 hermes MPC86xADS RPXClassic \
- AMX860 IAD210 MPC885ADS RPXlite \
- c2mon ICU862_100MHz MVS1 RPXlite_DW \
- CCM IP860 NETPHONE RRvision \
- cogent_mpc8xx IVML24 NETTA SM850 \
- ELPT860 IVML24_128 NETTA2 SPD823TS \
- ESTEEM192E IVML24_256 NETTA_ISDN svm_sc8xx \
- ETX094 IVMS8 NETVIA SXNI855T \
- FADS823 IVMS8_128 NETVIA_V2 TOP860 \
- FADS850SAR IVMS8_256 NX823 TQM823L \
- FADS860T KUP4K pcu_e TQM823L_LCD \
- FLAGADM KUP4X QS823 TQM850L \
- FPS850L LANTEC QS850 TQM855L \
- GEN860T lwmon QS860T TQM860L \
- GEN860T_SC MBX R360MPI v37 \
+ Adder87x GENIETV MBX860T R360MPI \
+ AdderII GTH MHPC RBC823 \
+ ADS860 hermes MPC86xADS rmu \
+ AMX860 IAD210 MPC885ADS RPXClassic \
+ c2mon ICU862_100MHz MVS1 RPXlite \
+ CCM IP860 NETPHONE RPXlite_DW \
+ cogent_mpc8xx IVML24 NETTA RRvision \
+ ELPT860 IVML24_128 NETTA2 SM850 \
+ ESTEEM192E IVML24_256 NETTA_ISDN SPD823TS \
+ ETX094 IVMS8 NETVIA svm_sc8xx \
+ FADS823 IVMS8_128 NETVIA_V2 SXNI855T \
+ FADS850SAR IVMS8_256 NX823 TOP860 \
+ FADS860T KUP4K pcu_e TQM823L \
+ FLAGADM KUP4X QS823 TQM823L_LCD \
+ FPS850L LANTEC QS850 TQM850L \
+ GEN860T lwmon QS860T TQM855L \
+ GEN860T_SC MBX quantum TQM860L \
+ v37 \
"
#########################################################################
QS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+quantum_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx quantum
+
R360MPI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
* i.e. they are 8 bytes apart. For big endian addressing, the 8 bit register
* will be at byte 7 (the address + 7). For little endian addressing, the
* register will be at byte 0 (the address + 0). To learn the endianess
- * we must include <asm/byteorder.h>
+ * we must include <endian.h>
*
* Take the CMA102 and CMA111 motherboards as examples...
*
#ifndef __ASSEMBLY__
-#include <asm/byteorder.h>
+#ifdef USE_HOSTCC
+#include <endian.h> /* avoid using private kernel header files */
+#else
+#include <asm/byteorder.h> /* use U-Boot provided headers */
+#endif
/* a single CMA10x motherboard i/o register */
typedef
struct {
-#if defined(__LITTLE_ENDIAN)
+#if __BYTE_ORDER == __LITTLE_ENDIAN
unsigned char value;
#endif
unsigned char filler[7];
-#if defined(__BIG_ENDIAN)
+#if __BYTE_ORDER == __BIG_ENDIAN
unsigned char value;
#endif
}
/* V360EPC PCI Bridge */
typedef
struct {
-#if defined(__LITTLE_ENDIAN)
+#if __BYTE_ORDER == __LITTLE_ENDIAN
unsigned short v3_pci_vendor; /* 0x00 */
unsigned short v3_pci_device;
unsigned short v3_pci_cmd; /* 0x04 */
unsigned long reserved8:24;
unsigned long reserved9[7]; /* 0xe4 */
#endif
-#if defined(__BIG_ENDIAN)
+#if __BYTE_ORDER == __BIG_ENDIAN
unsigned short v3_pci_device; /* 0x00 */
unsigned short v3_pci_vendor;
unsigned short v3_pci_stat; /* 0x04 */
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o fpga.o
+
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# RMU boards
+#
+
+TEXT_BASE = 0xfff00000
--- /dev/null
+/*
+ * (C) Copyright 2001-2003
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* The DEBUG define must be before common to enable debugging */
+#undef DEBUG
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include "fpga.h"
+/* ------------------------------------------------------------------------- */
+
+#define MAX_ONES 226
+
+/* MPC850 port D */
+#define PD(bit) (1 << (15 - (bit)))
+# define FPGA_INIT PD(11) /* FPGA init pin (ppc input) */
+# define FPGA_PRG PD(12) /* FPGA program pin (ppc output) */
+# define FPGA_CLK PD(13) /* FPGA clk pin (ppc output) */
+# define FPGA_DATA PD(14) /* FPGA data pin (ppc output) */
+# define FPGA_DONE PD(15) /* FPGA done pin (ppc input) */
+
+
+/* DDR 0 - input, 1 - output */
+#define FPGA_INIT_PDDIR FPGA_PRG | FPGA_CLK | FPGA_DATA /* just set outputs */
+
+
+#define SET_FPGA(data) immr->im_ioport.iop_pddat = (data)
+#define GET_FPGA immr->im_ioport.iop_pddat
+
+#define FPGA_WRITE_1 { \
+ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
+ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+
+#define FPGA_WRITE_0 { \
+ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
+ SET_FPGA(FPGA_PRG); /* set data to 0 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+
+
+int fpga_boot (unsigned char *fpgadata, int size)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ int i, index, len;
+ int count;
+
+#ifdef CFG_FPGA_SPARTAN2
+ int j;
+ unsigned char data;
+#else
+ unsigned char b;
+ int bit;
+#endif
+
+ debug ("fpga_boot: fpgadata = %p, size = %d\n", fpgadata, size);
+
+ /* display infos on fpgaimage */
+ printf ("FPGA:");
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf (" %s", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+ printf ("\n");
+
+
+ index = 0;
+
+#ifdef CFG_FPGA_SPARTAN2
+ /* search for preamble 0xFFFFFFFF */
+ while (1) {
+ if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
+ && (fpgadata[index + 2] == 0xff)
+ && (fpgadata[index + 3] == 0xff))
+ break; /* preamble found */
+ else
+ index++;
+ }
+#else
+ /* search for preamble 0xFF2X */
+ for (index = 0; index < size - 1; index++) {
+ if ((fpgadata[index] == 0xff)
+ && ((fpgadata[index + 1] & 0xf0) == 0x30))
+ break;
+ }
+ index += 2;
+#endif
+
+ debug ("FPGA: configdata starts at position 0x%x\n", index);
+ debug ("FPGA: length of fpga-data %d\n", size - index);
+
+ /*
+ * Setup port pins for fpga programming
+ */
+ immr->im_ioport.iop_pddir = FPGA_INIT_PDDIR;
+
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ /*
+ * Init fpga by asserting and deasserting PROGRAM*
+ */
+ SET_FPGA (FPGA_CLK | FPGA_DATA);
+
+ /* Wait for FPGA init line low */
+ count = 0;
+ while (GET_FPGA & FPGA_INIT) {
+ udelay (1000); /* wait 1ms */
+ /* Check for timeout - 100us max, so use 3ms */
+ if (count++ > 3) {
+ debug ("FPGA: Booting failed!\n");
+ return ERROR_FPGA_PRG_INIT_LOW;
+ }
+ }
+
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ /* deassert PROGRAM* */
+ SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
+
+ /* Wait for FPGA end of init period . */
+ count = 0;
+ while (!(GET_FPGA & FPGA_INIT)) {
+ udelay (1000); /* wait 1ms */
+ /* Check for timeout */
+ if (count++ > 3) {
+ debug ("FPGA: Booting failed!\n");
+ return ERROR_FPGA_PRG_INIT_HIGH;
+ }
+ }
+
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ debug ("write configuration data into fpga\n");
+ /* write configuration-data into fpga... */
+
+#ifdef CFG_FPGA_SPARTAN2
+ /*
+ * Load uncompressed image into fpga
+ */
+ for (i = index; i < size; i++) {
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ if ((i % 1024) == 0)
+ printf ("%6d out of %6d\r", i, size); /* let them know we are alive */
+#endif
+
+ data = fpgadata[i];
+ for (j = 0; j < 8; j++) {
+ if ((data & 0x80) == 0x80) {
+ FPGA_WRITE_1;
+ } else {
+ FPGA_WRITE_0;
+ }
+ data <<= 1;
+ }
+ }
+ /* add some 0xff to the end of the file */
+ for (i = 0; i < 8; i++) {
+ data = 0xff;
+ for (j = 0; j < 8; j++) {
+ if ((data & 0x80) == 0x80) {
+ FPGA_WRITE_1;
+ } else {
+ FPGA_WRITE_0;
+ }
+ data <<= 1;
+ }
+ }
+#else
+ /* send 0xff 0x20 */
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_1;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+
+ /*
+ ** Bit_DeCompression
+ ** Code 1 .. maxOnes : n '1's followed by '0'
+ ** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0'
+ ** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1'
+ ** 255 : '1'
+ */
+
+ for (i = index; i < size; i++) {
+ b = fpgadata[i];
+ if ((b >= 1) && (b <= MAX_ONES)) {
+ for (bit = 0; bit < b; bit++) {
+ FPGA_WRITE_1;
+ }
+ FPGA_WRITE_0;
+ } else if (b == (MAX_ONES + 1)) {
+ for (bit = 1; bit < b; bit++) {
+ FPGA_WRITE_1;
+ }
+ } else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
+ for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
+ FPGA_WRITE_0;
+ }
+ FPGA_WRITE_1;
+ } else if (b == 255) {
+ FPGA_WRITE_1;
+ }
+ }
+#endif
+ debug ("\n\n");
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ /*
+ * Check if fpga's DONE signal - correctly booted ?
+ */
+
+ /* Wait for FPGA end of programming period . */
+ count = 0;
+ while (!(GET_FPGA & FPGA_DONE)) {
+ udelay (1000); /* wait 1ms */
+ /* Check for timeout */
+ if (count++ > 3) {
+ debug ("FPGA: Booting failed!\n");
+ return ERROR_FPGA_PRG_DONE;
+ }
+ }
+
+ debug ("FPGA: Booting successful!\n");
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Virtex2 FPGA configuration support for the QUANTUM computer
+ */
+int fpga_boot(unsigned char *fpgadata, int size);
+
+#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */
+#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */
+#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
+/* vim: set ts=4 sw=4 tw=78: */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "fpga.h"
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+unsigned long flash_init (void);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFCC25
+
+const uint sdram_table[] = {
+ /*
+ * Single Read. (Offset 00h in UPMA RAM)
+ */
+ 0x0F03CC04, 0x00ACCC24, 0x1FF74C20, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Burst Read. (Offset 08h in UPMA RAM)
+ */
+ 0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
+ 0x01FFCC20, 0x1FF74C20, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Single Write. (Offset 18h in UPMA RAM)
+ */
+ 0x0F03CC02, 0x00AC0C24, 0x1FF74C25, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Burst Write. (Offset 20h in UPMA RAM)
+ */
+ 0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
+ 0x01FFFC24, 0x1FF74C25, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Refresh. (Offset 30h in UPMA RAM)
+ * (Initialization code at 0x36)
+ */
+ 0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
+ 0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4,
+
+ /*
+ * Exception. (Offset 3Ch in UPMA RAM)
+ */
+ 0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ unsigned char *s = getenv ("serial#");
+
+ puts ("Board QUANTUM, Serial No: ");
+
+ for (; s && *s; ++s) {
+ if (*s == ' ')
+ break;
+ putc (*s);
+ }
+ putc ('\n');
+ return (0); /* success */
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size9;
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ /* Refresh clock prescalar */
+ memctl->memc_mptpr = CFG_MPTPR;
+
+ memctl->memc_mar = 0x00000088;
+
+ /* Map controller banks 1 to the SDRAM bank */
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+
+ memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+ udelay (200);
+
+ /* perform SDRAM initializsation sequence */
+
+ memctl->memc_mcr = 0x80002136; /* SDRAM bank 0 */
+ udelay (1);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+ udelay (1000);
+
+ /* Check Bank 0 Memory Size,
+ * 9 column mode
+ */
+ size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE_PRELIM,
+ SDRAM_MAX_SIZE);
+ /*
+ * Final mapping:
+ */
+ memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ udelay (1000);
+
+ return (size9);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+ long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile long int *addr;
+ ulong cnt, val, size;
+ ulong save[32]; /* to make test non-destructive */
+ unsigned char i = 0;
+
+ memctl->memc_mamr = mamr_value;
+
+ for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ save[i] = *addr;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ /* Restore the original data before leaving the function.
+ */
+ *addr = save[i];
+ for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+ addr = (volatile ulong *) base + cnt;
+ *addr = save[--i];
+ }
+ return (0);
+ }
+
+ for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+ *addr = save[--i];
+
+ if (val != (~cnt)) {
+ size = cnt * sizeof (long);
+ /* Restore the original data before returning
+ */
+ for (cnt <<= 1; cnt <= maxsize / sizeof (long);
+ cnt <<= 1) {
+ addr = (volatile ulong *) base + cnt;
+ *addr = save[--i];
+ }
+ return (size);
+ }
+ }
+ return (maxsize);
+}
+
+/*
+ * Miscellaneous intialization
+ */
+int misc_init_r (void)
+{
+ char *fpga_data_str = getenv ("fpgadata");
+ char *fpga_size_str = getenv ("fpgasize");
+ void *fpga_data;
+ int fpga_size;
+ int status;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ int flash_size;
+
+ /* Remap FLASH according to real size */
+ flash_size = flash_init ();
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+ if (fpga_data_str && fpga_size_str) {
+ fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16);
+ fpga_size = simple_strtoul (fpga_size_str, NULL, 10);
+
+ status = fpga_boot (fpga_data, fpga_size);
+ if (status != 0) {
+ printf ("\nFPGA: Booting failed ");
+ switch (status) {
+ case ERROR_FPGA_PRG_INIT_LOW:
+ printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_INIT_HIGH:
+ printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_DONE:
+ printf ("(Timeout: DONE not high after programming FPGA)\n ");
+ break;
+ }
+ }
+ }
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+/* XXX ?
+ . = env_offset;
+*/
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+
+ . = env_offset;
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
#if (CMA_MB_CAPS & CMA_MB_CAP_SER2) && !(CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
#error 2nd dual serial capability defined without serial/parallel capability
#endif
-#include <board/cogent/mb.h>
+#include "../board/cogent/mb.h"
#endif /* _CONFIG_COGENT_COMMON_H */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ * changes for 16M board
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#undef CONFIG_MPC860
+#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
+#define CONFIG_RPXLITE 1 /* QUANTUM is the RPXlite clone */
+#define CONFIG_RMU 1 /* The QUNATUM is based on our RMU */
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+/* default developmenmt environment */
+
+#undef CONFIG_CLOCKS_IN_MHZ /* clocks passed to Linux in MHz. Needed for old kernels (2.4) crashes for new kernels */
+
+#define CONFIG_ETHADDR 00:0B:17:00:00:00
+
+#define CONFIG_IPADDR 10.10.69.10
+#define CONFIG_SERVERIP 10.10.69.49
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_HOSTNAME QUANTUM
+#define CONFIG_ROOTPATH /opt/eldk/pcc_8xx
+
+#define CONFIG_BOOTARGS "root=/dev/ram rw"
+
+#define CONFIG_BOOTCOMMAND "bootm ff000000"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "serial#=12345\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0"
+
+/*
+ * Select the more full-featured memory test (Barr embedded systems)
+ */
+#define CFG_ALT_MEMTEST
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+
+/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/
+#define CONFIG_RTC_M48T35A 1
+
+#if 0
+#define CONFIG_WATCHDOG 1 /* watchdog enabled */
+#else
+#undef CONFIG_WATCHDOG
+#endif
+
+/* NVRAM and RTC */
+#define CFG_NVRAM_BASE_ADDR 0xFA000000
+#define CFG_NVRAM_SIZE 2048
+
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO)
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "system"
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00040000 /* memtest works on */
+#define CFG_MEMTEST_END 0x01f00000 /* 256K ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFA200000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+
+#if 1
+ #define CFG_FLASH_CFI_DRIVER
+#else
+ #undef CFG_FLASH_CFI_DRIVER
+#endif
+
+
+#ifdef CFG_FLASH_CFI_DRIVER
+ #define CFG_FLASH_CFI 1
+ #undef CFG_FLASH_USE_BUFFER_WRITE
+ #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#endif
+
+/*%%% #define CFG_FLASH_BASE 0xFFF00000 */
+#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#else
+#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
+#endif
+#define CFG_MONITOR_BASE 0xFFF00000
+/*%%% #define CFG_MONITOR_BASE CFG_FLASH_BASE */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x00F40000 /* Offset of Environment Sector absolute address 0xfff40000*/
+#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/* FPGA */
+#define CONFIG_MISC_INIT_R
+#define CFG_FPGA_SPARTAN2
+#define CFG_FPGA_PROG_FEEDBACK
+
+
+/*-----------------------------------------------------------------------
+ * Reset address
+ */
+#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR (SIUMCR_MLRC10)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ */
+/*%%%#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
+ */
+/* up to 50 MHz we use a 1:1 clock */
+#define CFG_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF00
+/* up to 50 MHz we use a 1:1 clock */
+#define CFG_SCCR (SCCR_COM00 | SCCR_TBS)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0xEC000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define CFG_DER 0x2002000F*/
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0 and OR0 (FLASH)
+ */
+
+#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */
+#define CFG_PRELIM_OR_AM 0xFE000000 /* OR addr mask */
+
+/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
+#define CFG_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
+
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+
+/*
+ * BR1 and OR1 (SDRAM)
+ *
+ */
+#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
+#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM 0x00000E00
+
+#define CFG_OR1_PRELIM (0xF0000000 | CFG_OR_TIMING_SDRAM ) /* map 256 MB */
+#define CFG_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/* RPXLITE mem setting */
+#define CFG_BR3_PRELIM 0xFA400001 /* FPGA */
+#define CFG_OR3_PRELIM 0xFFFF8910
+
+#define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
+#define CFG_OR4_PRELIM 0xFFFE0970
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MAMR_PTA 20
+
+/*
+ * Refresh clock Prescalar
+ */
+#define CFG_MPTPR MPTPR_PTP_DIV2
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+ MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * BCSRx
+ *
+ * Board Status and Control Registers
+ *
+ */
+
+#define BCSR0 0xFA400000
+#define BCSR1 0xFA400001
+#define BCSR2 0xFA400002
+#define BCSR3 0xFA400003
+
+#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
+#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
+#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
+#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
+#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
+#define BCSR0_COLTEST 0x20
+#define BCSR0_ETHLPBK 0x40
+#define BCSR0_ETHEN 0x80
+
+#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */
+#define BCSR1_PCVCTL6 0x02
+#define BCSR1_PCVCTL5 0x04
+#define BCSR1_PCVCTL4 0x08
+#define BCSR1_IPB5SEL 0x10
+
+#define BCSR2_ENPA5HDR 0x08 /* USB Control */
+#define BCSR2_ENUSBCLK 0x10
+#define BCSR2_USBPWREN 0x20
+#define BCSR2_USBSPD 0x40
+#define BCSR2_USBSUSP 0x80
+
+#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */
+#define BCSR3_BWNVR 0x02 /* NVRAM Battery */
+#define BCSR3_RDY_BSY 0x04 /* Flash Operation */
+#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */
+#define BCSR3_D27 0x10 /* Dip Switch settings */
+#define BCSR3_D26 0x20
+#define BCSR3_D25 0x40
+#define BCSR3_D24 0x80
+
+#endif /* __CONFIG_H */
#ifndef __BIG_ENDIAN_BITFIELD
#define __BIG_ENDIAN_BITFIELD
#endif
+#define __BYTE_ORDER __BIG_ENDIAN
#include <linux/byteorder/swab.h>
#ifndef __LITTLE_ENDIAN_BITFIELD
#define __LITTLE_ENDIAN_BITFIELD
#endif
+#define __BYTE_ORDER __LITTLE_ENDIAN
#include <linux/byteorder/swab.h>
projects / oweals / u-boot.git / commitdiff