select SUPPORT_SPL
select SUPPORT_TPL
+config TARGET_P1021RDB
+ bool "Support P1021RDB"
+ select SUPPORT_SPL
+ select SUPPORT_TPL
+
config TARGET_P1_P2_RDB_PC
bool "Support p1_p2_rdb_pc"
select SUPPORT_SPL
TARGET_P1020MBG || \
TARGET_P1020RDB_PC || \
TARGET_P1020RDB_PD || \
- TARGET_P1020UTM
+ TARGET_P1020UTM || \
+ TARGET_P1021RDB
config SYS_BOARD
default "p1_p2_rdb_pc"
#ifdef CONFIG_SYS_DDR_RAW_TIMING
#if defined(CONFIG_P1020RDB_PROTO) || \
- defined(CONFIG_P1021RDB) || \
+ defined(CONFIG_TARGET_P1021RDB) || \
defined(CONFIG_TARGET_P1020UTM)
/* Micron MT41J256M8_187E */
dimm_params_t ddr_raw_timing = {
#define GPIO_SLIC_PIN 30
#define GPIO_SLIC_DATA (1 << (31 - GPIO_SLIC_PIN))
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
#define GPIO_DDR_RST_PORT 1
#define GPIO_DDR_RST_PIN 8
#define GPIO_DDR_RST_DATA (1 << (31 - GPIO_DDR_RST_PIN))
#define GPIO_2BIT_MASK (0x3 << (32 - (GPIO_DDR_RST_PIN + 1) * 2))
#endif
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
#define PCA_IOPORT_I2C_ADDR 0x23
#define PCA_IOPORT_OUTPUT_CMD 0x2
#define PCA_IOPORT_CFG_CMD 0x6
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* GPIO */
{1, 1, 2, 0, 0}, /* GPIO7/PB1 - LOAD_DEFAULT_N */
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
{1, 8, 1, 1, 0}, /* GPIO10/PB8 - DDR_RST */
#endif
{0, 15, 1, 0, 0}, /* GPIO11/A15 - WDI */
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
par_io_t *par_io = (par_io_t *) &(gur->qe_par_io);
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
/* reset DDR3 */
setbits_be32(&par_io[GPIO_DDR_RST_PORT].cpdat, GPIO_DDR_RST_DATA);
udelay(1000);
}
#if defined(CONFIG_QE) && \
- (defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB))
+ (defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB))
static void fdt_board_fixup_qe_pins(void *blob)
{
unsigned int oldbus;
#ifdef CONFIG_QE
do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
sizeof("okay"), 0);
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
fdt_board_fixup_qe_pins(blob);
#endif
#endif
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_TPL=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB"
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_TPL=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB"
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
"57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
#endif
-#if defined(CONFIG_P1021RDB)
+#if defined(CONFIG_TARGET_P1021RDB)
#define CONFIG_BOARDNAME "P1021RDB-PC"
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_P1021
CONFIG_OVERWRITE_ETHADDR_ONCE
CONFIG_P1020
CONFIG_P1021
-CONFIG_P1021RDB
CONFIG_P1024
CONFIG_P1024RDB
CONFIG_P1025