mx6sabresd: Add LVDS splash screen support
authorFabio Estevam <fabio.estevam@freescale.com>
Wed, 4 Sep 2013 18:12:38 +0000 (15:12 -0300)
committerStefano Babic <sbabic@denx.de>
Tue, 10 Sep 2013 17:12:55 +0000 (19:12 +0200)
mx6sabresd boards can be connected to a Hannstar XGA LVDS panel.

Add support for displaying U-boot splashscreen on it.

By default, HDMI splash is selected.

In order to use splash via LVDS, do the following in the U-boot prompt:

setenv panel Hannstar-XGA
save

and reboot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
board/freescale/mx6sabresd/mx6sabresd.c

index 5db516d5fd92fa07a248c55efcd7267693016c54..c832bd98a851bc70ef83fd4762083ede630f8c6b 100644 (file)
@@ -234,47 +234,171 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-static struct fb_videomode const hdmi = {
-       .name           = "HDMI",
-       .refresh        = 60,
-       .xres           = 1024,
-       .yres           = 768,
-       .pixclock       = 15385,
-       .left_margin    = 220,
-       .right_margin   = 40,
-       .upper_margin   = 21,
-       .lower_margin   = 7,
-       .hsync_len      = 60,
-       .vsync_len      = 10,
-       .sync           = FB_SYNC_EXT,
-       .vmode          = FB_VMODE_NONINTERLACED
+struct display_info_t {
+       int     bus;
+       int     addr;
+       int     pixfmt;
+       int     (*detect)(struct display_info_t const *dev);
+       void    (*enable)(struct display_info_t const *dev);
+       struct  fb_videomode mode;
 };
 
-int board_video_skip(void)
+static int detect_hdmi(struct display_info_t const *dev)
 {
-       int ret;
+       struct hdmi_regs *hdmi  = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+       return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
+}
 
-       ret = ipuv3_fb_init(&hdmi, 0, IPU_PIX_FMT_RGB24);
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+       imx_enable_hdmi_phy();
+}
 
-       if (ret)
-               printf("HDMI cannot be configured: %d\n", ret);
+static void enable_lvds(struct display_info_t const *dev)
+{
+       struct iomuxc *iomux = (struct iomuxc *)
+                               IOMUXC_BASE_ADDR;
+       u32 reg = readl(&iomux->gpr[2]);
+       reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
+              IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT;
+       writel(reg, &iomux->gpr[2]);
+}
+static struct display_info_t const displays[] = {{
+       .bus    = -1,
+       .addr   = 0,
+       .pixfmt = IPU_PIX_FMT_RGB24,
+       .detect = detect_hdmi,
+       .enable = do_enable_hdmi,
+       .mode   = {
+               .name           = "HDMI",
+               .refresh        = 60,
+               .xres           = 1024,
+               .yres           = 768,
+               .pixclock       = 15385,
+               .left_margin    = 220,
+               .right_margin   = 40,
+               .upper_margin   = 21,
+               .lower_margin   = 7,
+               .hsync_len      = 60,
+               .vsync_len      = 10,
+               .sync           = FB_SYNC_EXT,
+               .vmode          = FB_VMODE_NONINTERLACED
+} }, {
+       .bus    = -1,
+       .addr   = 0,
+       .pixfmt = IPU_PIX_FMT_LVDS666,
+       .detect = NULL,
+       .enable = enable_lvds,
+       .mode   = {
+               .name           = "Hannstar-XGA",
+               .refresh        = 60,
+               .xres           = 1024,
+               .yres           = 768,
+               .pixclock       = 15385,
+               .left_margin    = 220,
+               .right_margin   = 40,
+               .upper_margin   = 21,
+               .lower_margin   = 7,
+               .hsync_len      = 60,
+               .vsync_len      = 10,
+               .sync           = FB_SYNC_EXT,
+               .vmode          = FB_VMODE_NONINTERLACED
+} } };
 
-       imx_enable_hdmi_phy();
-       return ret;
+int board_video_skip(void)
+{
+       int i;
+       int ret;
+       char const *panel = getenv("panel");
+       if (!panel) {
+               for (i = 0; i < ARRAY_SIZE(displays); i++) {
+                       struct display_info_t const *dev = displays+i;
+                       if (dev->detect(dev)) {
+                               panel = dev->mode.name;
+                               printf("auto-detected panel %s\n", panel);
+                               break;
+                       }
+               }
+               if (!panel) {
+                       panel = displays[0].mode.name;
+                       printf("No panel detected: default to %s\n", panel);
+               }
+       } else {
+               for (i = 0; i < ARRAY_SIZE(displays); i++) {
+                       if (!strcmp(panel, displays[i].mode.name))
+                               break;
+               }
+       }
+       if (i < ARRAY_SIZE(displays)) {
+               ret = ipuv3_fb_init(&displays[i].mode, 0,
+                                   displays[i].pixfmt);
+               if (!ret) {
+                       displays[i].enable(displays+i);
+                       printf("Display: %s (%ux%u)\n",
+                              displays[i].mode.name,
+                              displays[i].mode.xres,
+                              displays[i].mode.yres);
+               } else
+                       printf("LCD %s cannot be configured: %d\n",
+                              displays[i].mode.name, ret);
+       } else {
+               printf("unsupported panel %s\n", panel);
+               return -EINVAL;
+       }
+
+       return 0;
 }
 
 static void setup_display(void)
 {
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+       struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
        int reg;
 
        enable_ipu_clock();
        imx_setup_hdmi();
 
+       /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */
+       reg = __raw_readl(&mxc_ccm->CCGR3);
+       reg |=  MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
+       writel(reg, &mxc_ccm->CCGR3);
+
+       /* set LDB0, LDB1 clk select to 011/011 */
+       reg = readl(&mxc_ccm->cs2cdr);
+       reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+                | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+       reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+             | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+       writel(reg, &mxc_ccm->cs2cdr);
+
+       reg = readl(&mxc_ccm->cscmr2);
+       reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
+       writel(reg, &mxc_ccm->cscmr2);
+
        reg = readl(&mxc_ccm->chsccdr);
        reg |= (CHSCCDR_CLK_SEL_LDB_DI0
                << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+       reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+               << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
        writel(reg, &mxc_ccm->chsccdr);
+
+       reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+            | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
+            | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+            | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+            | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+            | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+            | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+            | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED
+            | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0;
+       writel(reg, &iomux->gpr[2]);
+
+       reg = readl(&iomux->gpr[3]);
+       reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK
+                       | IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
+           | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+              << IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET);
+       writel(reg, &iomux->gpr[3]);
 }
 #endif /* CONFIG_VIDEO_IPUV3 */