This was done automatically with the following bits of scripting.
The Kconfig choice content was generated with this script snippet:
for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do
TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i);
MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i)
echo "config TARGET_$TARGET"
echo " bool \"$TARGET\""
echo " depends on $MACH"
echo
done
defconfigs were updated with a sed script (t):
# Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS,
/^CONFIG_SYS_EXTRA_OPTIONS/ {
s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/;
# Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving
# CONFIG_TARGET_<BOARD> in pattern space
P;D;
};
# Move CONFIG_TARGET_<BOARD> to hold space
/^CONFIG_TARGET/{h;n}
# Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or
# normal mode.
/^CONFIG_MACH/{p;g;p;n};
/^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n};
# Print any remaining lines normally
p;
Run as:
sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*)
and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from
Colombus_defconfig
board/sunxi/Makefile was updated with:
sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile
and manually retabbing a few lines to line up again.
The board descriptions could certainly be improved.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
default "sun7i" if MACH_SUN7I
default "sun8i" if MACH_SUN8I
+choice
+ prompt "Board"
+
+config TARGET_A10_OLINUXINO_L
+ bool "A10_OLINUXINO_L"
+ depends on MACH_SUN4I
+
+config TARGET_A10S_OLINUXINO_M
+ bool "A10S_OLINUXINO_M"
+ depends on MACH_SUN5I
+
+config TARGET_A13_OLINUXINOM
+ bool "A13_OLINUXINOM"
+ depends on MACH_SUN5I
+
+config TARGET_A13_OLINUXINO
+ bool "A13_OLINUXINO"
+ depends on MACH_SUN5I
+
+config TARGET_A20_OLINUXINO_L2
+ bool "A20_OLINUXINO_L2"
+ depends on MACH_SUN7I
+
+config TARGET_A20_OLINUXINO_L
+ bool "A20_OLINUXINO_L"
+ depends on MACH_SUN7I
+
+config TARGET_A20_OLINUXINO_M
+ bool "A20_OLINUXINO_M"
+ depends on MACH_SUN7I
+
+config TARGET_AUXTEK_T004
+ bool "AUXTEK_T004"
+ depends on MACH_SUN5I
+
+config TARGET_BANANAPI
+ bool "BANANAPI"
+ depends on MACH_SUN7I
+
+config TARGET_COLOMBUS
+ bool "COLOMBUS"
+ depends on MACH_SUN6I
+
+config TARGET_CUBIEBOARD2
+ bool "CUBIEBOARD2"
+ depends on MACH_SUN7I
+
+config TARGET_CUBIEBOARD
+ bool "CUBIEBOARD"
+ depends on MACH_SUN4I
+
+config TARGET_CUBIETRUCK
+ bool "CUBIETRUCK"
+ depends on MACH_SUN7I
+
+config TARGET_IPPO_Q8H_V5
+ bool "IPPO_Q8H_V5"
+ depends on MACH_SUN8I
+
+config TARGET_PCDUINO3
+ bool "PCDUINO3"
+ depends on MACH_SUN7I
+
+config TARGET_MELE_A1000G
+ bool "MELE_A1000G"
+ depends on MACH_SUN4I
+
+config TARGET_MELE_A1000
+ bool "MELE_A1000"
+ depends on MACH_SUN4I
+
+config TARGET_MELE_M3
+ bool "MELE_M3"
+ depends on MACH_SUN7I
+
+config TARGET_MINI_X_1GB
+ bool "MINI_X_1GB"
+ depends on MACH_SUN4I
+
+config TARGET_MINI_X
+ bool "MINI_X"
+ depends on MACH_SUN4I
+
+config TARGET_BA10_TV_BOX
+ bool "BA10_TV_BOX"
+ depends on MACH_SUN4I
+
+config TARGET_I12_TVBOX
+ bool "I12_TVBOX"
+ depends on MACH_SUN7I
+
+config TARGET_QT840A
+ bool "QT840A"
+ depends on MACH_SUN7I
+
+config TARGET_R7DONGLE
+ bool "R7DONGLE"
+ depends on MACH_SUN5I
+
+endchoice
+
config SYS_BOARD
default "sunxi"
obj-y += board.o
obj-$(CONFIG_SUNXI_GMAC) += gmac.o
obj-$(CONFIG_SUNXI_AHCI) += ahci.o
-obj-$(CONFIG_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o
-obj-$(CONFIG_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o
-obj-$(CONFIG_A13_OLINUXINO) += dram_a13_olinuxino.o
-obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o
-obj-$(CONFIG_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o
-obj-$(CONFIG_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o
-obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o
+obj-$(CONFIG_TARGET_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o
+obj-$(CONFIG_TARGET_A13_OLINUXINO) += dram_a13_olinuxino.o
+obj-$(CONFIG_TARGET_A13_OLINUXINOM) += dram_a13_oli_micro.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
# This is not a typo, uses the same mem settings as the a10s-olinuxino-m
-obj-$(CONFIG_AUXTEK_T004) += dram_a10s_olinuxino_m.o
-obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o
-obj-$(CONFIG_BANANAPI) += dram_bananapi.o
-obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o
-obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o
-obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o
-obj-$(CONFIG_I12_TVBOX) += dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_MELE_A1000) += dram_sun4i_360_512.o
-obj-$(CONFIG_MELE_A1000G) += dram_sun4i_360_1024_iow8.o
-obj-$(CONFIG_MELE_M3) += dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_MINI_X) += dram_sun4i_360_512.o
-obj-$(CONFIG_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o
-obj-$(CONFIG_PCDUINO3) += dram_linksprite_pcduino3.o
-obj-$(CONFIG_QT840A) += dram_sun7i_384_512_busw16_iow16.o
-obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o
+obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o
+obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o
+obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o
+obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o
+obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o
+obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o
+obj-$(CONFIG_TARGET_I12_TVBOX) += dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MELE_A1000) += dram_sun4i_360_512.o
+obj-$(CONFIG_TARGET_MELE_A1000G) += dram_sun4i_360_1024_iow8.o
+obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o
+obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o
+obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o
+obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o
+obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A10_OLINUXINO_L,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_A10_OLINUXINO_L=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
+S:CONFIG_MMC0_CD_PIN="PG1"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A10S_OLINUXINO_M=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINOM,CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A13_OLINUXINOM=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINO,CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A13_OLINUXINO=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_L2=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_L=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
+S:CONFIG_MMC0_CD_PIN="PH1"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_M=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AUXTEK_T004,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_AUXTEK_T004=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BANANAPI,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-bananapi.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_BANANAPI=y
-CONFIG_SYS_EXTRA_OPTIONS="COLOMBUS"
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
+CONFIG_TARGET_COLOMBUS=y
CONFIG_FDTFILE="sun6i-a31-colombus.dtb"
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_CUBIEBOARD2=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_CUBIEBOARD=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_CUBIETRUCK=y
-CONFIG_SYS_EXTRA_OPTIONS="IPPO_Q8H_V5,CONS_INDEX=5"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I=y
+CONFIG_TARGET_IPPO_Q8H_V5=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="PCDUINO3,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_PCDUINO3=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000G,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MELE_A1000G=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MELE_A1000=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-m3.dtb"
+S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+S:CONFIG_MMC0_CD_PIN="PH1"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_MELE_M3=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MINI_X_1GB,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MINI_X_1GB=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MINI_X,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MINI_X=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BA10_TV_BOX,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_BA10_TV_BOX=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="I12_TVBOX,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_I12_TVBOX=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="QT840A,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_QT840A=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="R7DONGLE,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_R7DONGLE=y