powerpc: T208xRDB: Disable legacy PCIe driver when DM_PCI is enabled
authorHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Tue, 27 Aug 2019 11:02:56 +0000 (11:02 +0000)
committerPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Wed, 28 Aug 2019 08:17:44 +0000 (13:47 +0530)
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
include/configs/T208xRDB.h

index ab92ca3b686337d0a1fceb3333e6f337fdde543d..3d95c4afa262bb66ae99310cee47784b8a810b4e 100644 (file)
@@ -433,49 +433,51 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE3           /* PCIE controller 3 */
 #define CONFIG_PCIE4           /* PCIE controller 4 */
-#define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0x80000000
-#define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS      0xc00000000ull
-#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
 #define CONFIG_SYS_PCIE1_IO_VIRT       0xf8000000
-#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xff8000000ull
-#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS      0xc20000000ull
-#define CONFIG_SYS_PCIE2_MEM_SIZE      0x10000000 /* 256M */
 #define CONFIG_SYS_PCIE2_IO_VIRT       0xf8010000
-#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
 #define CONFIG_SYS_PCIE2_IO_PHYS       0xff8010000ull
-#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 #define CONFIG_SYS_PCIE3_MEM_VIRT      0xb0000000
-#define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
 #define CONFIG_SYS_PCIE3_MEM_PHYS      0xc30000000ull
-#define CONFIG_SYS_PCIE3_MEM_SIZE      0x10000000      /* 256M */
 #define CONFIG_SYS_PCIE3_IO_VIRT       0xf8020000
-#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
 #define CONFIG_SYS_PCIE3_IO_PHYS       0xff8020000ull
-#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 4, Base address 203000 */
 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
-#define CONFIG_SYS_PCIE4_MEM_BUS       0xe0000000
 #define CONFIG_SYS_PCIE4_MEM_PHYS      0xc40000000ull
-#define CONFIG_SYS_PCIE4_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS                0x00000000
 #define CONFIG_SYS_PCIE4_IO_PHYS       0xff8030000ull
-#define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
 
 #ifdef CONFIG_PCI
+#if !defined(CONFIG_DM_PCI)
+#define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
+#define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
+#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
+#define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE      0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
+#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
+#define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_SIZE      0x10000000      /* 256M */
+#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
+#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
+#define CONFIG_SYS_PCIE4_MEM_BUS       0xe0000000
+#define CONFIG_SYS_PCIE4_MEM_SIZE      0x10000000      /* 256M */
+#define CONFIG_SYS_PCIE4_IO_BUS                0x00000000
+#define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
 #define CONFIG_PCI_INDIRECT_BRIDGE
+#endif
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif