MPC8541/MPC8555: Enable SS_EN in DDR_SDRAM_CLK_CNLT register

According to the MPC8555/MPC8541 reference manual the SS_EN (source
synchronous enable) bit in the DDR_SDRAM_CLK_CNLT register must be set
during initialization.

>From section 9.4.1.8 of that manual:

   Source synchronous enable. This bit field must be set during
   initialization. See Section 9.6.1, "DDR SDRAM Initialization
   Sequence," details.

   0 - Reserved
   1 - The address and command are sent to the DDR SDRAMs source
       synchronously.

In addition, Freescale application note AN2805 is also very clear that
this bit must be set.

This patch reverts a change introduced by commit
457caecdbca3df21a93abff19eab12dbc61b7897.

Testing Done:

Compiled targets CONFIG_TARGET_MPC8555CDS and CONFIG_TARGET_MPC8541CDS
and inspected the generated assembly code to verify the SS_EN bit was being
set.  There is one extra instruction emitted:

  fff9b774: 65 29 80 00  oris    r9,r9,32768

Compiled the CONFIG_TARGET_MPC8548CDS target and verified that no
additional instructions were emitted related to this patch.

Booted an image on a MPC8541 based board successfully.

Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Reviewed-by: York Sun <yorksun@freescale.com>

diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 690e73dacf6bea41af718be7bbcd680801e863bd..391925751a51bdca12701159a17ef5b79b7ee85c 100644 (file)
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -1747,9 +1747,17 @@ static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
                                         const memctl_options_t *popts)
 {
        unsigned int clk_adjust;        /* Clock adjust */
+       unsigned int ss_en = 0;         /* Source synchronous enable */
 
+#if defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+       /* Per FSL Application Note: AN2805 */
+       ss_en = 1;
+#endif
        clk_adjust = popts->clk_adjust;
-       ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
+       ddr->ddr_sdram_clk_cntl = (0
+                                  | ((ss_en & 0x1) << 31)
+                                  | ((clk_adjust & 0xF) << 23)
+                                  );
        debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl);
 }