endif
endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
-ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
-ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
select ARCH_MISC_INIT
select BOARD_EARLY_INIT_F
select CPU_V7A
- select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
imply MXC_GPIO
config ARCH_MX6
bool "Freescale MX6"
select CPU_V7A
- select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_THUMB_BUILD if SPL
void enable_ocotp_clk(unsigned char enable);
#endif
void enable_usboh3_clk(unsigned char enable);
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable);
#endif
void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq);
int word;
};
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
extern struct imx_sec_config_fuse_t const imx_sec_config_fuse;
#endif
i.MX6/7 supports DCD and Plugin. Enable this configuration
to use Plugin, otherwise DCD will be used.
-config SECURE_BOOT
+config IMX_HAB
bool "Support i.MX HAB features"
depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
select FSL_CAAM if HAS_CAAM
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
endif
obj-$(CONFIG_SATA) += sata.o
-obj-$(CONFIG_SECURE_BOOT) += hab.o
+obj-$(CONFIG_IMX_HAB) += hab.o
obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
endif
ifeq ($(SOC),$(filter $(SOC),mx7ulp))
obj-y += cache.o
-obj-$(CONFIG_SECURE_BOOT) += hab.o
+obj-$(CONFIG_IMX_HAB) += hab.o
endif
ifeq ($(SOC),$(filter $(SOC),vf610))
obj-y += ddrmc-vf610.o
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 1,
.word = 3,
}
#endif
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
u32 reg;
};
#endif
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 0,
.word = 6,
}
}
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
if (enable)
}
#endif
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 1,
.word = 3,
enable_usboh3_clk(1);
}
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
if (enable)
static char *get_reset_cause(char *);
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 29,
.word = 6,
}
#endif
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
/*
* +------------+ 0x0 (DDR_UIMAGE_START) -
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
PLUGIN board/freescale/mx6sllevk/plugin.bin 0x00907000
#else
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
PLUGIN board/freescale/mx6ullevk/plugin.bin 0x00907000
#else
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
PLUGIN board/freescale/mx7ulp_evk/plugin.bin 0x2F020000
#else
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG__IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include <config.h>
IMAGE_VERSION 2
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
*/
clrsetbits_le16(&wdog->wcr, 0, 0x10);
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
/* Determine HAB state */
env_set_ulong(HAB_ENABLED_ENVNAME, imx_hab_is_enabled());
#else
spl_image->flags |= SPL_FIT_FOUND;
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
board_spl_fit_post_load((ulong)fit, size);
#endif
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_COLIBRI_IMX7=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_IMX_RDC=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_COLIBRI_IMX7=y
CONFIG_TARGET_COLIBRI_IMX7_EMMC=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_MX6DL_MAMOJ=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CSF_SIZE=0x2060
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_WARP7=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_WARP7=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
the dek_blob cmd enabled. The image used for DEK blob generation
needs to have the following configurations enabled in Kconfig:
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_CMD_DEKBLOB=y
Note: The encrypted boot feature is only supported by HABv4 or
The U-Boot provides support to secure boot configuration and also provide
access to the HAB APIs exposed by the ROM vector table, the support is
-enabled by selecting the CONFIG_SECURE_BOOT option.
+enabled by selecting the CONFIG_IMX_HAB option.
When built with this configuration, the U-Boot provides extra functions for
HAB, such as the HAB status logs retrievement through the hab_status command
-------------------------------------
The first step is to generate an U-Boot image supporting the HAB features
-mentioned above, this can be achieved by adding CONFIG_SECURE_BOOT to the
+mentioned above, this can be achieved by adding CONFIG_IMX_HAB to the
build configuration:
- Defconfig:
- CONFIG_SECURE_BOOT=y
+ CONFIG_IMX_HAB=y
- Kconfig:
The U-Boot provides support to secure boot configuration and also provide
access to the HAB APIs exposed by the ROM vector table, the support is
-enabled by selecting the CONFIG_SECURE_BOOT option.
+enabled by selecting the CONFIG_IMX_HAB option.
When built with this configuration the U-Boot correctly pads the final SPL
image by aligning to the next 0xC00 address, so the CSF signature data
-------------------------------------
The first step is to generate an U-Boot image supporting the HAB features
-mentioned above, this can be achieved by adding CONFIG_SECURE_BOOT to the
+mentioned above, this can be achieved by adding CONFIG_IMX_HAB to the
build configuration:
- Defconfig:
- CONFIG_SECURE_BOOT=y
+ CONFIG_IMX_HAB=y
- Kconfig:
#ifdef CONFIG_SPL_SIZE_LIMIT
spl_size_limit = CONFIG_SPL_SIZE_LIMIT;
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_CSF_SIZE)
+#if defined(CONFIG_IMX_HAB) && defined(CONFIG_CSF_SIZE)
spl_size_limit -= CONFIG_CSF_SIZE;
#endif
#ifdef CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD