*
*/
-#define GNUNET_ATS_ARRAY_TERMINATOR 0
+#define GNUNET_TRANSPORT_ATS_ARRAY_TERMINATOR 0
/**
* Enum defining all known property types for ATS
- * Enum values are used in the GNUNET_ATS_Information struct as (key,value)-pair
+ * Enum values are used in the GNUNET_TRANSPORT_ATS_Information struct as (key,value)-pair
*
* Cost are always stored in uint32_t, so all units used to define costs
* have to be normalized to fit in uint32_t [0 .. 4.294.967.295]
* 2049..3072 : Values with a relation to availability
*
*/
-enum GNUNET_ATS_Property
+enum GNUNET_TRANSPORT_ATS_Property
{
/* Cost related values */
* LAN: 0 [cent/MB]
* 2G : 10 [cent/MB]
*/
- GNUNET_ATS_COST_FINANCIAL_PER_VOLUME = 1,
+ GNUNET_TRANSPORT_ATS_COST_FINANCIAL_PER_VOLUME = 1,
/**
* Time based cost in financial units to transmit data
* LAN : 0 [cent/h]
* Dialup: 10 [cent/h]
*/
- GNUNET_ATS_COST_FINANCIAL_PER_TIME = 2,
+ GNUNET_TRANSPORT_ATS_COST_FINANCIAL_PER_TIME = 2,
/**
* Computational costs
* HTTPS with AES CBC-128: 5,279
* HTTPS with RC4-1024: 2,652
*/
- GNUNET_ATS_COST_COMPUTATIONAL = 3,
+ GNUNET_TRANSPORT_ATS_COST_COMPUTATIONAL = 3,
/**
* Energy consumption
* WLAN: 89 (600 mW @ 802.11g /w 54 MBit/s)
* Bluetooth: 267 (100 mW @ BT2.0 EDR /w 3 MBit/s)
*/
- GNUNET_ATS_COST_ENERGY_CONSUMPTION = 4,
+ GNUNET_TRANSPORT_ATS_COST_ENERGY_CONSUMPTION = 4,
/**
* Connect cost
* 2129 bytes Ethernet, 1975 bytes TCP/IP, 1755 bytes TCP, 1403 bytes HTTPS
*
* */
- GNUNET_ATS_COST_CONNECT = 5,
+ GNUNET_TRANSPORT_ATS_COST_CONNECT = 5,
/**
* Bandwidth cost
* Dial-up: 8 (64 Kbit/s)
*
*/
- GNUNET_ATS_COST_BANDWITH_AVAILABLE = 6,
+ GNUNET_TRANSPORT_ATS_COST_BANDWITH_AVAILABLE = 6,
/**
* Network overhead
* UDP/IPv4 over Ethernet: 1024 + 38 + 20 + 8 = 1090 [bytes/kb]
* UDP/IPv6 over Ethernet: 1024 + 38 + 40 + 8 = 1110 [bytes/kb]
*/
- GNUNET_ATS_COST_NETWORK_OVERHEAD = 7,
+ GNUNET_TRANSPORT_ATS_COST_NETWORK_OVERHEAD = 7,
/* Quality related values */
*
* Unit: [dBm]
*/
- GNUNET_ATS_QUALITY_PHY_SIGNAL_STRENGTH = 1025,
+ GNUNET_TRANSPORT_ATS_QUALITY_PHY_SIGNAL_STRENGTH = 1025,
/**
* Collision rate on physical layer
*
* Unit: [B/s]
*/
- GNUNET_ATS_QUALITY_PHY_COLLISION_RATE = 1026,
+ GNUNET_TRANSPORT_ATS_QUALITY_PHY_COLLISION_RATE = 1026,
/**
* Error rate on physical layer
*
* Unit: [B/s]
*/
- GNUNET_ATS_QUALITY_PHY_ERROR_RATE = 1027,
+ GNUNET_TRANSPORT_ATS_QUALITY_PHY_ERROR_RATE = 1027,
/* Network layer quality properties */
* Dialup: 4000
* WLAN : 7000
*/
- GNUNET_ATS_QUALITY_NET_DELAY = 1028,
+ GNUNET_TRANSPORT_ATS_QUALITY_NET_DELAY = 1028,
/**
* Jitter
*
* Unit: [μs]
*/
- GNUNET_ATS_QUALITY_NET_JITTER = 1029,
+ GNUNET_TRANSPORT_ATS_QUALITY_NET_JITTER = 1029,
/**
* Error rate on network layer
* Note: This numbers are just assumptions as an example, not
* measured or somehow determined
*/
- GNUNET_ATS_QUALITY_NET_ERRORRATE = 1030,
+ GNUNET_TRANSPORT_ATS_QUALITY_NET_ERRORRATE = 1030,
/**
* Drop rate on network layer
* Note: This numbers are just assumptions as an example, not
* measured or somehow determined
*/
- GNUNET_ATS_QUALITY_NET_DROPRATE = 1031,
+ GNUNET_TRANSPORT_ATS_QUALITY_NET_DROPRATE = 1031,
/**
* Loss rate on network layer
* Note: This numbers are just assumptions as an example, not measured
* or somehow determined
*/
- GNUNET_ATS_QUALITY_NET_LOSSRATE = 1032,
+ GNUNET_TRANSPORT_ATS_QUALITY_NET_LOSSRATE = 1032,
/**
* Throughput on network layer
* Dialup: 4
*
*/
- GNUNET_ATS_QUALITY_NET_THROUGHPUT = 1033,
+ GNUNET_TRANSPORT_ATS_QUALITY_NET_THROUGHPUT = 1033,
/* Availability related values */
/* =========================== */
/**
* Is a peer reachable?
*/
- GNUNET_ATS_AVAILABILITY_REACHABLE = 2048,
+ GNUNET_TRANSPORT_ATS_AVAILABILITY_REACHABLE = 2048,
/**
* Is there a connection established to a peer using this transport
*/
- GNUNET_ATS_AVAILABILITY_CONNECTED = 2049
+ GNUNET_TRANSPORT_ATS_AVAILABILITY_CONNECTED = 2049
};
/**
* This structure will be used by plugins to communicate costs to ATS or by
* higher level components to tell ATS their constraints.
- * Always a pair of (GNUNET_ATS_Property, uint32_t value).
+ * Always a pair of (GNUNET_TRANSPORT_ATS_Property, uint32_t value).
* Value is always uint32_t, so all units used to define costs have to
* be normalized to fit uint32_t.
*/
-struct GNUNET_ATS_Information
+struct GNUNET_TRANSPORT_ATS_Information
{
/**
* ATS property type
/**
* Function called whenever the plugin has to notify ATS about costs for using this transport
*
- * The cost will be passed as struct GNUNET_ATS_Cost_Information[]
+ * The cost will be passed as struct GNUNET_TRANSPORT_ATS_Cost_Information[]
* This array is 0-terminated, so the last element will be a pair:
- * ((cost->cost_type==GNUNET_ATS_ARRAY_TERMINATOR) && cost->cost_value==0))
+ * ((cost->cost_type==GNUNET_TRANSPORT_ATS_ARRAY_TERMINATOR) && cost->cost_value==0))
*
* @param cls closure
* @param peer peer
* @param addr peer address
* @param addrlen address length
- * @param cost pointer to the first element of struct GNUNET_ATS_Cost_Information[]
+ * @param cost pointer to the first element of struct GNUNET_TRANSPORT_ATS_Cost_Information[]
*/
typedef void (*GNUNET_TRANSPORT_CostReport) (void *cls,
const struct GNUNET_PeerIdentity *peer,
const void *addr,
uint16_t addrlen,
- struct GNUNET_ATS_Information * cost);
+ struct GNUNET_TRANSPORT_ATS_Information * cost);
/**
* The transport service will pass a pointer to a struct
projects / oweals / gnunet.git / commitdiff