fsl_esdhc: Update usdhc driver to support i.MX8

Add CONFIG_ARCH_IMX8 to use the 64bits support in usdhc driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 03c6743ae89f6e48a6f95a51a13379dbf9845829..220f4f74a801a2a6c801610bc463d98247d57a66 100644 (file)
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -257,7 +257,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
        int timeout;
        struct fsl_esdhc *regs = priv->esdhc_regs;
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_MX8M)
+       defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
        dma_addr_t addr;
 #endif
        uint wml_value;
@@ -271,7 +271,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
                esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_MX8M)
+       defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
                addr = virt_to_phys((void *)(data->dest));
                if (upper_32_bits(addr))
                        printf("Error found for upper 32 bits\n");
@@ -301,7 +301,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
                                        wml_value << 16);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_MX8M)
+       defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
                addr = virt_to_phys((void *)(data->src));
                if (upper_32_bits(addr))
                        printf("Error found for upper 32 bits\n");
@@ -367,7 +367,7 @@ static void check_and_invalidate_dcache_range
        unsigned size = roundup(ARCH_DMA_MINALIGN,
                                data->blocks*data->blocksize);
 #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_MX8M)
+       defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
        dma_addr_t addr;
 
        addr = virt_to_phys((void *)(data->dest));