ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7

Device tree and binding alignment with kernel v5.5-rc7

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
index 07cd0809ffee7c836427414d0fcdbc1b59356108..81a363d93db58a7ee94b1fce6f9f71a8b1b38d80 100644 (file)
--- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -138,7 +138,16 @@
                                status = "disabled";
                        };
 
-                       adc12_usb_pwr_pins_a: adc12-usb-pwr-pins-0 {
+                       adc12_ain_pins_a: adc12-ain-0 {
+                               pins {
+                                       pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+                                                <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+                                                <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+                                                <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+                               };
+                       };
+
+                       adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
                                pins {
                                        pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
                                                 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
@@ -175,6 +184,18 @@
                                };
                        };
 
+                       dac_ch1_pins_a: dac-ch1 {
+                               pins {
+                                       pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+                               };
+                       };
+
+                       dac_ch2_pins_a: dac-ch2 {
+                               pins {
+                                       pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+                               };
+                       };
+
                        dcmi_pins_a: dcmi-0 {
                                pins {
                                        pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */

diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index 232fe709057f275a299bcb0ee538504bb44f0280..3065593bf2add004a41d8ff43677592331bde0e6 100644 (file)
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -252,14 +252,13 @@
                                regulator-name = "vbus_otg";
                                interrupts = <IT_OCP_OTG 0>;
                                interrupt-parent = <&pmic>;
-                               regulator-active-discharge;
                        };
 
                        vbus_sw: pwr_sw2 {
                                regulator-name = "vbus_sw";
                                interrupts = <IT_OCP_SWOUT 0>;
                                interrupt-parent = <&pmic>;
-                               regulator-active-discharge;
+                               regulator-active-discharge = <1>;
                        };
                };
 

diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index dcaab3eef2f2783c908cd192d5d3f98f956a151b..4045a6e7312d706e5ac4039476830f25191cbc0c 100644 (file)
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -35,24 +35,7 @@
 };
 
 &adc {
-       pinctrl-names = "default";
-       pinctrl-0 = <&adc12_usb_pwr_pins_a>;
-       vdd-supply = <&vdd>;
-       vdda-supply = <&vdd>;
-       vref-supply = <&vrefbuf>;
        status = "okay";
-       adc1: adc@0 {
-               /*
-                * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
-                * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
-                * 5 * (56 + 47kOhms) * 5pF => 2.5us.
-                * Use arbitrary margin here (e.g. 5µs).
-                */
-               st,min-sample-time-nsecs = <5000>;
-               /* ANA0, ANA1, USB Type-C CC1 & CC2 */
-               st,adc-channels = <0 1 18 19>;
-               status = "okay";
-       };
 };
 
 &clk_hse {

diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index dc61bfc3d5abd411b51107bfa11597342fa902f6..624bf6954bec2d14bfa710727ba4ac57bc5b3f6b 100644 (file)
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -25,6 +25,7 @@
        };
 
        memory@c0000000 {
+               device_type = "memory";
                reg = <0xc0000000 0x20000000>;
        };
 
@@ -92,7 +93,34 @@
                        "Playback" , "MCLK",
                        "Capture" , "MCLK",
                        "MICL" , "Mic Bias";
-               dais = <&sai2a_port &sai2b_port>;
+               dais = <&sai2a_port &sai2b_port &i2s2_port>;
+               status = "okay";
+       };
+};
+
+&adc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+       vdd-supply = <&vdd>;
+       vdda-supply = <&vdd>;
+       vref-supply = <&vrefbuf>;
+       status = "disabled";
+       adc1: adc@0 {
+               /*
+                * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+                * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+                * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+                * Use arbitrary margin here (e.g. 5us).
+                */
+               st,min-sample-time-nsecs = <5000>;
+               /* AIN connector, USB Type-C CC1 & CC2 */
+               st,adc-channels = <0 1 6 13 18 19>;
+               status = "okay";
+       };
+       adc2: adc@100 {
+               /* AIN connector, USB Type-C CC1 & CC2 */
+               st,adc-channels = <0 1 2 6 18 19>;
+               st,min-sample-time-nsecs = <5000>;
                status = "okay";
        };
 };
@@ -146,9 +174,7 @@
                reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
                interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
                interrupt-parent = <&gpiog>;
-               pinctrl-names = "default", "sleep";
-               pinctrl-0 = <&ltdc_pins_a>;
-               pinctrl-1 = <&ltdc_pins_sleep_a>;
+               #sound-dai-cells = <0>;
                status = "okay";
 
                ports {
@@ -161,6 +187,13 @@
                                        remote-endpoint = <&ltdc_ep0_out>;
                                };
                        };
+
+                       port@3 {
+                               reg = <3>;
+                               sii9022_tx_endpoint: endpoint {
+                                       remote-endpoint = <&i2s2_endpoint>;
+                               };
+                       };
                };
        };
 
@@ -244,7 +277,7 @@
 
                        vddcore: buck1 {
                                regulator-name = "vddcore";
-                               regulator-min-microvolt = <800000>;
+                               regulator-min-microvolt = <1200000>;
                                regulator-max-microvolt = <1350000>;
                                regulator-always-on;
                                regulator-initial-mode = <0>;
@@ -345,7 +378,7 @@
                         vbus_sw: pwr_sw2 {
                                regulator-name = "vbus_sw";
                                interrupts = <IT_OCP_SWOUT 0>;
-                               regulator-active-discharge;
+                               regulator-active-discharge = <1>;
                         };
                };
 
@@ -364,6 +397,23 @@
        };
 };
 
+&i2s2 {
+       clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+       clock-names = "pclk", "i2sclk", "x8k", "x11k";
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&i2s2_pins_a>;
+       pinctrl-1 = <&i2s2_pins_sleep_a>;
+       status = "okay";
+
+       i2s2_port: port {
+               i2s2_endpoint: endpoint {
+                       remote-endpoint = <&sii9022_tx_endpoint>;
+                       format = "i2s";
+                       mclk-fs = <256>;
+               };
+       };
+};
+
 &ipcc {
        status = "okay";
 };
@@ -374,6 +424,9 @@
 };
 
 &ltdc {
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&ltdc_pins_a>;
+       pinctrl-1 = <&ltdc_pins_sleep_a>;
        status = "okay";
 
        port {

diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index 020ea0f0e2f08ada5329ca282a9e3f576a160505..d26adcbeba33ea235495eefab6e72abf1cb9d82d 100644 (file)
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -53,6 +53,19 @@
        };
 };
 
+&i2c1 {
+       touchscreen@38 {
+               compatible = "focaltech,ft6236";
+               reg = <0x38>;
+               interrupts = <2 2>;
+               interrupt-parent = <&gpiof>;
+               interrupt-controller;
+               touchscreen-size-x = <480>;
+               touchscreen-size-y = <800>;
+               status = "okay";
+       };
+};
+
 &ltdc {
        status = "okay";
 

diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index acb59f24cc6a3d089d739e96de3e62b64d800714..ae4da39ce854ea88ab1044eac5aefaac3fcf75e0 100644 (file)
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -84,7 +84,21 @@
 
                gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
                gpios-states = <0>;
-               states = <1800000 0x1 2900000 0x0>;
+               states = <1800000 0x1>,
+                        <2900000 0x0>;
+       };
+};
+
+&dac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+       vref-supply = <&vdda>;
+       status = "disabled";
+       dac1: dac@1 {
+               status = "okay";
+       };
+       dac2: dac@2 {
+               status = "okay";
        };
 };
 
@@ -127,7 +141,7 @@
 
                        vddcore: buck1 {
                                regulator-name = "vddcore";
-                               regulator-min-microvolt = <800000>;
+                               regulator-min-microvolt = <1200000>;
                                regulator-max-microvolt = <1350000>;
                                regulator-always-on;
                                regulator-initial-mode = <0>;
@@ -225,7 +239,7 @@
                         vbus_sw: pwr_sw2 {
                                regulator-name = "vbus_sw";
                                interrupts = <IT_OCP_SWOUT 0>;
-                               regulator-active-discharge;
+                               regulator-active-discharge = <1>;
                         };
                };
 

diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index aa5892b156e346d72ff061dc043cad6a8cc9ab09..bd8ffc185f966b9e7d04a7851f27c73a5c4256c1 100644 (file)
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -32,7 +32,6 @@
 
        joystick {
                compatible = "gpio-keys";
-               #size-cells = <0>;
                pinctrl-0 = <&joystick_pins>;
                pinctrl-names = "default";
                button-0 {
@@ -343,14 +342,12 @@
 
 &usbh_ehci {
        phys = <&usbphyc_port0>;
-       phy-names = "usb";
        status = "okay";
 };
 
 &usbotg_hs {
        dr_mode = "peripheral";
        phys = <&usbphyc_port1 0>;
-       phy-names = "usb2-phy";
        status = "okay";
 };