board/BuR/kwb: Redesign default-environment

Due to several changes in the boot-process we do a complete redesign of the
default environment.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index 7989f4b475556d6a9e14b5bc9a0e0fc6898e070f..dd30df27b05b2d12144a14e4f1d4f6c8969e9b6f 100644 (file)
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -43,49 +43,58 @@
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x200 /* 256 KB */
 #define CONFIG_SPL_MMC_SUPPORT
 
-#undef CONFIG_SPL_OS_BOOT
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR               0x80F80000
-
-/* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x900   /* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x80    /* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
-
-#endif /* CONFIG_SPL_OS_BOOT */
-
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE                        (128 << 10)
+/* Always 64 KiB env size */
+#define CONFIG_ENV_SIZE                        (64 << 10)
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "autoload=0\0" \
-       "loadaddr=0x80100000\0" \
-       "bootfile=arimg\0" \
-       "usbboot=echo Booting from USB-Stick ...; " \
-               "usb start; " \
-               "fatload usb 0 ${loadaddr} ${bootfile}; " \
-               "usb stop; " \
-               "go ${loadaddr};\0" \
-       "netboot=echo Booting from network ...; " \
-               "setenv autoload 0; " \
-               "dhcp; " \
-               "tftp ${loadaddr} arimg; " \
-               "go ${loadaddr}\0" \
-       "usbupdate=echo Updating UBOOT from USB-Stick ...; " \
-               "usb start; " \
-               "fatload usb 0 0x80000000 updateubootusb.img; " \
-               "source;\0" \
-       "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
-               "setenv autoload 0; " \
-               "dhcp;" \
-               "tftp 0x80000000 updateUBOOT.img;" \
-               "source;\0"
+BUR_COMMON_ENV \
+"vx_romfsbase=0x800E0000\0" \
+"vx_romfssize=0x20000\0" \
+"vx_memtop=0x8FBEF000\0" \
+"loadromfs=mmc read ${vx_romfsbase} 700 100\0" \
+"autoload=0\0" \
+"loadaddr=0x80100000\0" \
+"logoaddr=0x82000000\0" \
+"defaultARlen=0x8000\0" \
+"loaddefaultAR=mmc read ${loadaddr} 800 ${defaultARlen}\0" \
+"defaultAR=run loadromfs; run loaddefaultAR; go ${loadaddr}\0" \
+"logo0=fatload mmc 0:1 ${logoaddr} SYSTEM/ADDON/Bootlogo/Bootlogo.bmp.gz && " \
+       "bmp display ${logoaddr} 0 0\0" \
+"logo1=fatload mmc 0:1 ${logoaddr} SYSTEM/BASE/Bootlogo/Bootlogo.bmp.gz && " \
+       "bmp display ${logoaddr} 0 0\0" \
+"mmcboot=echo booting AR from eMMC-flash ...; "\
+       "run logo0 || run logo1; " \
+       "run loadromfs; " \
+       "fatload mmc 0:1 ${loadaddr} arimg && go ${loadaddr}; " \
+       "run defaultAR;\0" \
+"netboot=echo booting AR from network ...; " \
+       "run loadromfs; " \
+       "tftp ${loadaddr} arimg && go ${loadaddr}; " \
+       "puts 'networkboot failed!';\0" \
+"usbupdate=echo updating u-boot from usb ...; " \
+       "usb start; " \
+       "fatload usb 0 0x80000000 updateubootusb.img && source; " \
+       "puts 'usbupdate failed!'\0" \
+"netscript=echo running script from network (tftp) ...; " \
+       "tftp 0x80000000 netscript.img && source; " \
+       "puts 'netscript load failed!'\0" \
+"netupdate=tftp ${loadddr} MLO && mmc write ${loadaddr} 100 100; " \
+       "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 300\0" \
+"netupdatedefaultAR=echo updating defaultAR from network (tftp) ...; " \
+       "if tftp 0x80100000 arimg.bin; " \
+       "then mmc write 0x80100000 800 ${defaultARlen}; " \
+       "else setcurs 1 8; puts 'defAR update failed (tftp)!'; fi;\0" \
+"netupdateROMFS=echo updating romfs from network (tftp) ...; " \
+       "if tftp 0x80100000 romfs.bin; " \
+       "then mmc write 0x80100000 700 100; " \
+       "else setcurs 1 8; puts 'romfs update failed (tftp)!'; fi;\0"
+
 #endif /* !CONFIG_SPL_BUILD*/
 
 #define CONFIG_BOOTCOMMAND \
        "run usbupdate;"
-#define CONFIG_BOOTDELAY               1 /* TODO: für release auf 0 setzen */
+#define CONFIG_BOOTDELAY               0
 
 /* undefine command which we not need here */
 #undef CONFIG_BOOTM_NETBSD