+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-/* environment.h defines the various CONFIG_ENV_... values in terms
- * of whichever ones are given in the configuration file.
- */
-#include <environment.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- * has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPWV * addr, flash_info_t * info);
-static void flash_reset (flash_info_t * info);
-static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data);
-static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect (flash_info_t * info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size_b;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- size_b = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size_b;
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx\n",
- size_b);
- }
-
- /* Do this again (was done already in flast_get_size), just
- * in case we move it when remap the FLASH.
- */
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
- /* read the hardware protection status (if any) into the
- * protection array in flash_info.
- */
- flash_sync_real_protect (&flash_info[0]);
-#endif
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_ADDR
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return (size_b);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset (flash_info_t * info)
-{
- FPWV *base = (FPWV *) (info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW) 0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW) 0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
- && (info->flash_id & FLASH_BTYPE)) {
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set up sector start address table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * sect_size);
- } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM800T) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set up sector start address table (top boot sector type) */
- for (i = 0; i < info->sector_count - 3; i++)
- info->start[i] = base + (i * sect_size);
- i = info->sector_count - 1;
- info->start[i--] =
- base + (info->size - 0x00004000) * (sizeof (FPW) / 2);
- info->start[i--] =
- base + (info->size - 0x00006000) * (sizeof (FPW) / 2);
- info->start[i--] =
- base + (info->size - 0x00008000) * (sizeof (FPW) / 2);
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t * info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- char *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- case FLASH_MAN_BM:
- printf ("BRIGHT MICRO ");
- break;
- case FLASH_MAN_FUJ:
- printf ("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf ("SST ");
- break;
- case FLASH_MAN_STM:
- printf ("STM ");
- break;
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- } else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM800T:
- fmt = "29LV800B%s (8 Mbit, %s)\n";
- break;
- case FLASH_AM640U:
- fmt = "29LV641D (64 Mbit, uniform sectors)\n";
- break;
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- fmt = "28F800C3%s (8 Mbit, %s)\n";
- break;
- case FLASH_INTEL800B:
- case FLASH_INTEL800T:
- fmt = "28F800B3%s (8 Mbit, %s)\n";
- break;
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- fmt = "28F160C3%s (16 Mbit, %s)\n";
- break;
- case FLASH_INTEL160B:
- case FLASH_INTEL160T:
- fmt = "28F160B3%s (16 Mbit, %s)\n";
- break;
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- fmt = "28F320C3%s (32 Mbit, %s)\n";
- break;
- case FLASH_INTEL320B:
- case FLASH_INTEL320T:
- fmt = "28F320B3%s (32 Mbit, %s)\n";
- break;
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- fmt = "28F640C3%s (64 Mbit, %s)\n";
- break;
- case FLASH_INTEL640B:
- case FLASH_INTEL640T:
- fmt = "28F640B3%s (64 Mbit, %s)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf (fmt, bootletter, boottype);
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV * addr, flash_info_t * info)
-{
- /* Write auto select command: read Manufacturer ID */
-
- /* Write auto select command sequence and test FLASH answer */
- addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
- addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
- addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- switch (addr[0] & 0xff) {
-
- case (uchar) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN)
- switch (addr[1]) {
-
- case (FPW) AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MiB */
-
- case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F800C3B:
- info->flash_id += FLASH_28F800C3B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F800B3B:
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F160C3B:
- info->flash_id += FLASH_28F160C3B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F160B3B:
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F320C3B:
- info->flash_id += FLASH_28F320C3B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F320B3B:
- info->flash_id += FLASH_INTEL320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F640C3B:
- info->flash_id += FLASH_28F640C3B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F640B3B:
- info->flash_id += FLASH_INTEL640B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
- }
-
- flash_get_offsets ((ulong) addr, info);
-
- /* Put FLASH back in read mode */
- flash_reset (info);
-
- return (info->size);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void flash_sync_real_protect (flash_info_t * info)
-{
- FPWV *addr = (FPWV *) (info->start[0]);
- FPWV *sect;
- int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- /* check for protected sectors */
- *addr = (FPW) 0x00900090;
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but mixed protected and unprotected devices
- * within a sector should never happen.
- */
- sect = (FPWV *) (info->start[i]);
- info->protect[i] =
- (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
- }
-
- /* Put FLASH back in read mode */
- flash_reset (info);
- break;
-
- case FLASH_AM640U:
- case FLASH_AM800T:
- default:
- /* no hardware protect that we support */
- break;
- }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_INTEL800B:
- case FLASH_INTEL160B:
- case FLASH_INTEL320B:
- case FLASH_INTEL640B:
- case FLASH_28F800C3B:
- case FLASH_28F160C3B:
- case FLASH_28F320C3B:
- case FLASH_28F640C3B:
- case FLASH_AM640U:
- case FLASH_AM800T:
- break;
- case FLASH_UNKNOWN:
- default:
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- start = get_timer(0);
- last = 0;
-
- addr = (FPWV *) (info->start[sect]);
- if (intel) {
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
- } else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *) (info->start[0]);
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00800080; /* erase mode */
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- *addr = (FPW) 0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay (1000);
-
- while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if ((now =
- get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- }
-
- flash_reset (info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1 * CONFIG_SYS_HZ) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- flash_reset (info); /* reset to read mode */
- }
-
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof (data), left -= sizeof (data) - bytes) {
-
- bytes = addr & (sizeof (data) - 1);
- addr &= ~(sizeof (data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
-#ifdef CONFIG_SYS_LITTLE_ENDIAN
- for (i = 0; i < sizeof (data); i++) {
- data >>= 8;
- if (i < bytes || i - bytes >= left)
- data += (*((uchar *) addr + i)) << 24;
- else
- data += (*src++) << 24;
- }
-#else
- for (i = 0; i < sizeof (data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left)
- data += *((uchar *) addr + i);
- else
- data += *src++;
- }
-#endif
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- res = write_word_amd (info, (FPWV *) addr, data);
- break;
- case FLASH_MAN_INTEL:
- res = write_word_intel (info, (FPWV *) addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf ("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
-{
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
-
- base = (FPWV *) (info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- start = get_timer(0);
-
- /* data polling for D7 */
- while (res == 0
- && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00F000F0; /* reset bank */
- res = 1;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data)
-{
- int flag;
- int res = 0; /* result, assume success */
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
- *dest = (FPW) 0x00400040; /* program setup */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- start = get_timer(0);
-
- while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00B000B0; /* Suspend program */
- res = 1;
- }
- }
-
- if (res == 0 && (*dest & (FPW) 0x00100010))
- res = 1; /* write failed, time out error is close enough */
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
-
- return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect (flash_info_t * info, long sector, int prot)
-{
- int rcode = 0; /* assume success */
- FPWV *addr; /* address of sector */
- FPW value;
-
- addr = (FPWV *) (info->start[sector]);
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- flash_reset (info); /* make sure in read mode */
- *addr = (FPW) 0x00600060L; /* lock command setup */
- if (prot)
- *addr = (FPW) 0x00010001L; /* lock sector */
- else
- *addr = (FPW) 0x00D000D0L; /* unlock sector */
- flash_reset (info); /* reset to read mode */
-
- /* now see if it really is locked/unlocked as requested */
- *addr = (FPW) 0x00900090;
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but return failure. Mixed protected and
- * unprotected devices within a sector should never happen.
- */
- value = addr[2] & (FPW) 0x00010001;
- if (value == 0)
- info->protect[sector] = 0;
- else if (value == (FPW) 0x00010001)
- info->protect[sector] = 1;
- else {
- /* error, mixed protected and unprotected */
- rcode = 1;
- info->protect[sector] = 1;
- }
- if (info->protect[sector] != prot)
- rcode = 1; /* failed to protect/unprotect as requested */
-
- /* reload all protection bits from hardware for now */
- flash_sync_real_protect (info);
- break;
-
- case FLASH_AM640U:
- case FLASH_AM800T:
- default:
- /* no hardware protect that we support */
- info->protect[sector] = prot;
- break;
- }
-
- return rcode;
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuration settings for the PLEB 2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250 1 /* This is an PXA255 CPU */
-#define CONFIG_PLEB2 1 /* on an PLEB2 Board */
-#undef CONFIG_LCD
-#undef CONFIG_MMC
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/* None - PLEB 2 doesn't have any of this.
- #define CONFIG_LAN91C96
- #define CONFIG_LAN91C96_BASE 0x0C000000
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.0.21
-#define CONFIG_SERVERIP 192.168.0.250
-#define CONFIG_BOOTCOMMAND "bootm 40000"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200"
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
-#define CONFIG_CMD_MMC
-#endif
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 4 MB */
-
-/* Not entirely sure about this - DS/CHC */
-#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0x00000000 /* Don't set anything */
-#define CONFIG_SYS_GPSR1_VAL 0x00000080
-#define CONFIG_SYS_GPSR2_VAL 0x00000000
-
-#define CONFIG_SYS_GPCR0_VAL 0x00000000 /* Don't clear anything */
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00000000
-
-#define CONFIG_SYS_GPDR0_VAL 0x00000000
-#define CONFIG_SYS_GPDR1_VAL 0x000007C3
-#define CONFIG_SYS_GPDR2_VAL 0x00000000
-
-/* Edge detect registers (these are set by the kernel) */
-#define CONFIG_SYS_GRER0_VAL 0x00000000
-#define CONFIG_SYS_GRER1_VAL 0x00000000
-#define CONFIG_SYS_GRER2_VAL 0x00000000
-#define CONFIG_SYS_GFER0_VAL 0x00000000
-#define CONFIG_SYS_GFER1_VAL 0x00000000
-#define CONFIG_SYS_GFER2_VAL 0x00000000
-
-#define CONFIG_SYS_GAFR0_L_VAL 0x00000000
-#define CONFIG_SYS_GAFR0_U_VAL 0x00000000
-#define CONFIG_SYS_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */
-#define CONFIG_SYS_GAFR1_U_VAL 0x00000000
-#define CONFIG_SYS_GAFR2_L_VAL 0x00000000
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
-
-#define CONFIG_SYS_PSSR_VAL 0x20
-#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */
-#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */
-#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */
-#define CONFIG_SYS_MSC1_VAL 0x00000000
-#define CONFIG_SYS_MSC2_VAL 0x00000000
-
-#define CONFIG_SYS_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM.
- tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
-
-#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual */
- /* bits set in lowlevel_init.S */
-#define CONFIG_SYS_MDMRS_VAL 0x00000000
-
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000 /* Hangover from Lubbock.
- Needs calculating. (DS/CHC) */
-#define CONFIG_SYS_MCMEM0_VAL 0x00010504
-#define CONFIG_SYS_MCMEM1_VAL 0x00010504
-#define CONFIG_SYS_MCATT0_VAL 0x00010504
-#define CONFIG_SYS_MCATT1_VAL 0x00010504
-#define CONFIG_SYS_MCIO0_VAL 0x00004715
-#define CONFIG_SYS_MCIO1_VAL 0x00004715
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-/* FIXME */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* Flash protection */
-#define CONFIG_SYS_FLASH_PROTECTION 1
-
-/* FIXME */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
-#define CONFIG_ENV_SECT_SIZE 0x20000
-
-/* Option added to get around byte ordering issues in the flash driver */
-#define CONFIG_SYS_LITTLE_ENDIAN 1
-
-#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff