driver/ddr/freescale: Add support of accumulate ECC

If less than 8 ECC pins are used for DDR data bus width smaller than 64
bits, the 8-bit ECC code will be transmitted/received across several beats,
and it will be used to check 64-bits of data once 8-bits of ECC are
accumulated.

Signed-off-by: York Sun <yorksun@freescale.com>

diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 04e4178b15d7273ae9a6eb43c1b5b5bd4bcd0666..5e0ee77e46c6d28b4c8913789da52bda018b163e 100644 (file)
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -693,6 +693,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
        unsigned int x32_en = 0;        /* x32 enable */
        unsigned int pchb8 = 0;         /* precharge bit 8 enable */
        unsigned int hse;               /* Global half strength override */
+       unsigned int acc_ecc_en = 0;    /* Accumulated ECC enable */
        unsigned int mem_halt = 0;      /* memory controller halt */
        unsigned int bi = 0;            /* Bypass initialization */
 
@@ -736,6 +737,9 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
        ba_intlv_ctl = popts->ba_intlv_ctl;
        hse = popts->half_strength_driver_enable;
 
+       /* set when ddr bus width < 64 */
+       acc_ecc_en = (dbw != 0 && ecc_en == 1) ? 1 : 0;
+
        ddr->ddr_sdram_cfg = (0
                        | ((mem_en & 0x1) << 31)
                        | ((sren & 0x1) << 30)
@@ -752,6 +756,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
                        | ((x32_en & 0x1) << 5)
                        | ((pchb8 & 0x1) << 4)
                        | ((hse & 0x1) << 3)
+                       | ((acc_ecc_en & 0x1) << 2)
                        | ((mem_halt & 0x1) << 1)
                        | ((bi & 0x1) << 0)
                        );