sunxi: Add defconfig and dts for Dserve DSRV9703C tablet
authorHans de Goede <hdegoede@redhat.com>
Sat, 19 Mar 2016 07:55:47 +0000 (08:55 +0100)
committerHans de Goede <hdegoede@redhat.com>
Wed, 23 Mar 2016 21:04:13 +0000 (22:04 +0100)
The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD,
1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
arch/arm/dts/Makefile
arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts [new file with mode: 0644]
board/sunxi/MAINTAINERS
configs/dserve_dsrv9703c_defconfig [new file with mode: 0644]

index 1a0d577ccf4753f65b2afde55bd3d5f244aee646..6112f5273ab096d099f479c9e094e9822225db54 100644 (file)
@@ -110,6 +110,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
        sun4i-a10-ba10-tvbox.dtb \
        sun4i-a10-chuwi-v7-cw0825.dtb \
        sun4i-a10-cubieboard.dtb \
+       sun4i-a10-dserve-dsrv9703c.dtb \
        sun4i-a10-gemei-g9.dtb \
        sun4i-a10-hackberry.dtb \
        sun4i-a10-hyundai-a7hd.dtb \
diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
new file mode 100644 (file)
index 0000000..893497e
--- /dev/null
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+       model = "Dserve DSRV9703C";
+       compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bl_en_pin_dsrv9703c>;
+               pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+               brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+               default-brightness-level = <8>;
+               enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       haptics {
+               compatible = "regulator-haptic";
+               haptic-supply = <&reg_motor>;
+               min-microvolt = <3000000>;
+               max-microvolt = <3000000>;
+       };
+
+       reg_motor: reg_motor {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&motor_pins>;
+               regulator-name = "vcc-motor";
+               regulator-min-microvolt = <3000000>;
+               regulator-max-microvolt = <3000000>;
+               enable-active-high;
+               gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+       };
+};
+
+&codec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&codec_pa_pin>;
+       allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+
+       axp209: pmic@34 {
+               reg = <0x34>;
+               interrupts = <0>;
+       };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins_a>;
+       /* pull-ups and devices require AXP209 LDO3 */
+       status = "failed";
+};
+
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c2_pins_a>;
+       status = "okay";
+
+       ft5406ee8: touchscreen@38 {
+               compatible = "edt,edt-ft5406";
+               reg = <0x38>;
+               interrupt-parent = <&pio>;
+               interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&touchscreen_pins>;
+               reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+               touchscreen-size-x = <1024>;
+               touchscreen-size-y = <768>;
+       };
+};
+
+&lradc {
+       vref-supply = <&reg_ldo2>;
+       status = "okay";
+
+       button@400 {
+               label = "Volume Down";
+               linux,code = <KEY_VOLUMEDOWN>;
+               channel = <0>;
+               voltage = <400000>;
+       };
+
+       button@800 {
+               label = "Volume Up";
+               linux,code = <KEY_VOLUMEUP>;
+               channel = <0>;
+               voltage = <800000>;
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       bl_en_pin_dsrv9703c: bl_en_pin@0 {
+               allwinner,pins = "PH7";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       codec_pa_pin: codec_pa_pin@0 {
+               allwinner,pins = "PH15";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       motor_pins: motor_pins@0 {
+               allwinner,pins = "PB3";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       touchscreen_pins: touchscreen_pins@0 {
+               allwinner,pins = "PB13";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
+       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+               allwinner,pins = "PH5";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+       };
+};
+
+&pwm {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pwm0_pins_a>;
+       status = "okay";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <1250000>;
+       regulator-max-microvolt = <1250000>;
+       regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+       regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+       status = "okay";
+};
+
+&reg_usb2_vbus {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       usb2_vbus-supply = <&reg_usb2_vbus>;
+       status = "okay";
+};
index 58fd20033aa73e6b7d38ef1f84ec964332b4e811..603cda703df60ad3357065aabbbe24f3d6ca006b 100644 (file)
@@ -7,6 +7,7 @@ F:      configs/A10-OLinuXino-Lime_defconfig
 F:     configs/ba10_tv_box_defconfig
 F:     configs/Chuwi_V7_CW0825_defconfig
 F:     configs/Cubieboard_defconfig
+F:     configs/dserve_dsrv9703c_defconfig
 F:     configs/Hyundai_A7HD_defconfig
 F:     configs/inet1_defconfig
 F:     configs/inet97fv2_defconfig
diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig
new file mode 100644 (file)
index 0000000..45c6047
--- /dev/null
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN4I=y
+CONFIG_DRAM_CLK=360
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_USB0_VBUS_PIN="PB9"
+CONFIG_USB0_VBUS_DET="PH5"
+CONFIG_USB0_ID_DET="PH4"
+CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:80000,le:479,ri:544,up:5,lo:26,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH8"
+CONFIG_VIDEO_LCD_BL_EN="PH7"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_USB_MUSB_HOST=y