mx7ulp: scg: Remove unnused scg_a7_apll_init()
authorFabio Estevam <festevam@gmail.com>
Tue, 5 Nov 2019 12:47:53 +0000 (09:47 -0300)
committerStefano Babic <sbabic@denx.de>
Fri, 6 Dec 2019 11:05:08 +0000 (12:05 +0100)
scg_a7_apll_init() is not called anywhere, so remove such dead code

Signed-off-by: Fabio Estevam <festevam@gmail.com>
arch/arm/include/asm/arch-mx7ulp/scg.h
arch/arm/mach-imx/mx7ulp/scg.c

index 531d8f3a9502cc6689d1e15e6a69df3eba4b6c71..b79bde338f4a119ed258cff97c6d96135fdc2a3d 100644 (file)
@@ -331,7 +331,6 @@ u32 decode_pll(enum pll_clocks pll);
 void scg_a7_rccr_init(void);
 void scg_a7_spll_init(void);
 void scg_a7_ddrclk_init(void);
-void scg_a7_apll_init(void);
 void scg_a7_firc_init(void);
 void scg_a7_nicclk_init(void);
 void scg_a7_sys_clk_sel(enum scg_sys_src clk);
index 819c90af6ce97aed9fbae1bac39493545e94b1a2..c7bb7a1c6675b1785c129d27eb30abf4dfc68129 100644 (file)
@@ -949,67 +949,6 @@ void scg_a7_ddrclk_init(void)
 /* Clock source is System OSC <<0 */
 #define SCG1_APLL_CFG_CLKSRC_NUM        ((0x0) << SCG_PLL_CFG_CLKSRC_SHIFT)
 
-/*
- * A7 APLL = 24MHz / 1 * 22 / 1 / 1 = 528MHz,
- * system PLL is sourced from APLL,
- * APLL clock source is system OSC (24MHz)
- */
-#define SCG1_APLL_CFG_NUM_24M_OSC (SCG1_APLL_CFG_POSTDIV2_NUM     |   \
-                                  SCG1_APLL_CFG_POSTDIV1_NUM     |   \
-                                  (22 << SCG_PLL_CFG_MULT_SHIFT) |   \
-                                  SCG1_APLL_CFG_PFDSEL_NUM       |   \
-                                  SCG1_APLL_CFG_PREDIV_NUM       |   \
-                                  SCG1_APLL_CFG_BYPASS_NUM       |   \
-                                  SCG1_APLL_CFG_PLLSEL_NUM       |   \
-                                  SCG1_APLL_CFG_CLKSRC_NUM)
-
-/* PFD0 Freq = A7 APLL(528MHz) * 18 / 27 = 352MHz */
-#define SCG1_APLL_PFD0_FRAC_NUM (27)
-
-
-void scg_a7_apll_init(void)
-{
-       u32 val = 0;
-
-       /* Disable A7 Auxiliary PLL */
-       val = readl(&scg1_regs->apllcsr);
-       val &= ~SCG_APLL_CSR_APLLEN_MASK;
-       writel(val, &scg1_regs->apllcsr);
-
-       /* Gate off A7 APLL PFD0 ~ PDF4  */
-       val = readl(&scg1_regs->apllpfd);
-       val |= 0x80808080;
-       writel(val, &scg1_regs->apllpfd);
-
-       /* ================ A7 APLL Configuration Start ============== */
-       /* Configure A7 Auxiliary PLL */
-       writel(SCG1_APLL_CFG_NUM_24M_OSC, &scg1_regs->apllcfg);
-
-       /* Enable A7 Auxiliary PLL */
-       val = readl(&scg1_regs->apllcsr);
-       val |= SCG_APLL_CSR_APLLEN_MASK;
-       writel(val, &scg1_regs->apllcsr);
-
-       /* Wait for A7 APLL clock ready */
-       while (!(readl(&scg1_regs->apllcsr) & SCG_APLL_CSR_APLLVLD_MASK))
-               ;
-
-       /* Configure A7 APLL PFD0 */
-       val = readl(&scg1_regs->apllpfd);
-       val &= ~SCG_PLL_PFD0_FRAC_MASK;
-       val |= SCG1_APLL_PFD0_FRAC_NUM;
-       writel(val, &scg1_regs->apllpfd);
-
-       /* Un-gate A7 APLL PFD0 */
-       val = readl(&scg1_regs->apllpfd);
-       val &= ~SCG_PLL_PFD0_GATE_MASK;
-       writel(val, &scg1_regs->apllpfd);
-
-       /* Wait for A7 APLL PFD0 clock being valid */
-       while (!(readl(&scg1_regs->apllpfd) & SCG_PLL_PFD0_VALID_MASK))
-               ;
-}
-
 /* SCG1(A7) FIRC DIV configurations */
 /* Disable FIRC DIV3 */
 #define SCG1_FIRCDIV_DIV3_NUM           ((0x0) << SCG_FIRCDIV_DIV3_SHIFT)