libs-y += drivers/mtd/spi/
libs-y += drivers/net/
libs-y += drivers/net/phy/
-libs-y += drivers/pci/
libs-y += drivers/power/ \
drivers/power/domain/ \
drivers/power/fuel_gauge/ \
@echo "Failure to update by the deadline may result in board removal."
@echo "See doc/driver-model/MIGRATION.txt for more info."
@echo "===================================================="
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+ @echo "===================== WARNING ======================"
+ @echo "CONFIG_OF_EMBED is enabled. This option should only"
+ @echo "be used for debugging purposes. Please use"
+ @echo "CONFIG_OF_SEPARATE for boards in mainline."
+ @echo "See doc/README.fdt-control for more info."
+ @echo "===================================================="
endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
bool "Support PDU001"
select DM
select DM_SERIAL
+ imply SPL_SEPARATE_BSS
imply CMD_DM
help
Support for PDU001 platform developed by EETS GmbH.
-DA850_AM18XXEVM BOARD
+DA850_EVM BOARD
M: Adam Ford <aford173@gmail.com>
S: Maintained
F: board/davinci/da8xxevm/
F: include/configs/da850evm.h
-F: configs/da850_am18xxevm_defconfig
F: configs/da850evm_defconfig
F: configs/da850evm_nand_defconfig
F: configs/da850evm_direct_nor_defconfig
+AM18XXEVM BOARD
+S: Orphan
+F: configs/da850_am18xxevm_defconfig
+
OMAPL138_LCDK BOARD
M: Peter Howard <phoward@gme.net.au>
S: Maintained
}
#endif
-#if !CONFIG_IS_ENABLED(DM_USB)
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
-};
-
-static struct omap_musb_board_data musb_board_data = {
- .interface_type = MUSB_INTERFACE_ULPI,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HOST)
- .mode = MUSB_HOST,
-#elif defined(CONFIG_USB_MUSB_GADGET)
- .mode = MUSB_PERIPHERAL,
-#else
-#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
-#endif
- .config = &musb_config,
- .power = 100,
- .platform_ops = &omap2430_ops,
- .board_data = &musb_board_data,
-};
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
-/* Call usb_stop() before starting the kernel */
-void show_boot_progress(int val)
-{
- if (val == BOOTSTAGE_ID_RUN_OS)
- usb_stop();
-}
-
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
-#endif /* !DM_USB*/
/*
* Routine: misc_init_r
* Description: Configure board specific parts
{
twl4030_power_init();
omap_die_id_display();
-
-#if !CONFIG_IS_ENABLED(DM_USB)
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
- musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
-#endif
-#endif
return 0;
}
config SPL_LIBDISK_SUPPORT
bool "Support disk partitions"
+ select PARTITIONS
help
Enable support for disk partitions within SPL. 'Disk' is something
of a misnomer as it includes non-spinning media such as flash (as
config SPL_MMC_SUPPORT
bool "Support MMC"
depends on MMC
+ select HAVE_BLOCK_DEVICE
help
Enable support for MMC (Multimedia Card) within SPL. This enables
the MMC protocol implementation and allows any enabled drivers to
TPL, tpl/u-boot-with-tpl.bin. For new boards, suggest to
use u-boot.img.
-config SPL_PCI_SUPPORT
+config SPL_PCI
bool "Support PCI drivers"
help
Enable support for PCI in SPL. For platforms that need PCI to boot,
config SPL_USB_HOST_SUPPORT
bool "Support USB host drivers"
+ select HAVE_BLOCK_DEVICE
help
Enable access to USB (Universal Serial Bus) host devices so that
SPL can load U-Boot from a connected USB peripheral, such as a USB
help
Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details.
-config TPL_PCI_SUPPORT
+config TPL_PCI
bool "Support PCI drivers"
help
Enable support for PCI in TPL. For platforms that need PCI to boot,
CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_ISW_ENTRY_ADDR=0x40300350
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_LOGLEVEL=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
-CONFIG_DRIVER_TI_CPSW=y
CONFIG_PHY_GIGE=y
CONFIG_MII=y
+CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_TIMER=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_MUSB_TI=y
CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
+CONFIG_LOGLEVEL=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
# CONFIG_SPL_ENV_SUPPORT is not set
# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
-CONFIG_DRIVER_TI_CPSW=y
CONFIG_PHY_GIGE=y
CONFIG_MII=y
+CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_TIMER=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_MUSB_TI=y
CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_ETHER=y
+CONFIG_SPL_TINY_MEMSET=y
CONFIG_RSA=y
CONFIG_LZO=y
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_EMBED=y
+CONFIG_OF_SEPARATE=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001"
# CONFIG_NET is not set
CONFIG_SPL_DM=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
-CONFIG_SPL_PCI_SUPPORT=y
+CONFIG_SPL_PCI=y
CONFIG_SPL_PCH_SUPPORT=y
CONFIG_SPL_RTC_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+# CONFIG_SPL_BLK is not set
CONFIG_CLK=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_ENV_IS_IN_MMC=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+# CONFIG_SPL_BLK is not set
CONFIG_CLK=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
CONFIG_BCH=y
-# CONFIG_SPL_OF_LIBFDT is not set
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
CONFIG_BCH=y
-# CONFIG_SPL_OF_LIBFDT is not set
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
CONFIG_BCH=y
-# CONFIG_SPL_OF_LIBFDT is not set
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
CONFIG_BCH=y
-# CONFIG_SPL_OF_LIBFDT is not set
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
-CONFIG_SPL_PCI_SUPPORT=y
+CONFIG_SPL_PCI=y
CONFIG_SPL_PCH_SUPPORT=y
CONFIG_SPL_RTC_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_PCI=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_PCI=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
Note that for some odd reason qemu-system-aarch64 needs to be explicitly
told to use a 64-bit CPU or it will boot in 32-bit mode.
+Additional persistent U-boot environment support can be added as follows:
+- Create envstore.img using qemu-img:
+ qemu-img create -f raw envstore.img 64M
+- Add a pflash drive parameter to the command line:
+ -drive if=pflash,format=raw,index=1,file=envstore.img
+
Additional peripherals that have been tested to work in both U-Boot and Linux
can be enabled with the following command line parameters:
In concert with maintainers migrating their block device usage to the
appropriate DM driver, CONFIG_BLK needs to be set as well. The final deadline
here coincides with the final deadline for migration of the various block
-subsystems.
+subsystems. At this point we will be able to audit and correct the logic in
+Kconfig around using CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE and make
+use of CONFIG_BLK / CONFIG_SPL_BLK as needed.
CONFIG_DM_SPI
CONFIG_DM_SPI_FLASH
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
-obj-$(CONFIG_$(SPL_TPL_)PCI_SUPPORT) += pci/
+obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
-obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
-obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
obj-$(CONFIG_SPL_THERMAL) += thermal/
obj-y += blk_legacy.o
endif
+ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_IDE) += ide.o
+endif
obj-$(CONFIG_SANDBOX) += sandbox.o
obj-$(CONFIG_$(SPL_TPL_)BLOCK_CACHE) += blkcache.o
static int blk_post_probe(struct udevice *dev)
{
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
+#if defined(CONFIG_PARTITIONS) && defined(CONFIG_HAVE_BLOCK_DEVICE)
struct blk_desc *desc = dev_get_uclass_platdata(dev);
part_init(desc);
config FIRMWARE
bool "Enable Firmware driver support"
+config SPL_ARM_PSCI_FW
+ bool
+ select FIRMWARE
+
config ARM_PSCI_FW
bool
select FIRMWARE
obj-$(CONFIG_FIRMWARE) += firmware-uclass.o
-obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_$(SPL_)ARM_PSCI_FW) += psci.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_SANDBOX) += firmware-sandbox.o
/* try Processor Local Bus device first */
addr = dev_read_addr(dev);
-#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
+#if CONFIG_IS_ENABLED(PCI) && defined(CONFIG_DM_PCI)
if (addr == FDT_ADDR_T_NONE) {
/* then try pci device */
struct fdt_pci_addr pci_addr;
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
+ "console=ttyS2,115200n8\0" \
"fdtfile=am3517-evm.dtb\0" \
"fdtaddr=0x82C00000\0" \
"vram=16M\0" \
#define CONFIG_SYS_HZ 1000
/* Environment options */
-#define CONFIG_ENV_SIZE SZ_64K
+#define CONFIG_ENV_ADDR 0x4000000
+#define CONFIG_ENV_SIZE SZ_256K
#define BOOT_TARGET_DEVICES(func) \
func(SCSI, scsi, 0) \
+ func(VIRTIO, virtio, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE 0x0
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */
+
#endif /* __CONFIG_H */
return fdtdec_get_addr_size(blob, node, prop_name, NULL);
}
-#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
+#if CONFIG_IS_ENABLED(PCI) && defined(CONFIG_DM_PCI)
int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
const char *prop_name, struct fdt_pci_addr *addr)
{
else
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+ifdef CONFIG_SPL_FRAMEWORK
+libs-$(CONFIG_PARTITIONS) += disk/
+endif
endif
-libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-y += drivers/
libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
libs-y += dts/
static int lib_test_hex_to_bin(struct unit_test_state *uts)
{
- return 0;
-
ut_asserteq(0x0, hex_to_bin('0'));
ut_asserteq(0x1, hex_to_bin('1'));
ut_asserteq(0x2, hex_to_bin('2'));
ut_asserteq(0xe, hex_to_bin('e'));
ut_asserteq(0xf, hex_to_bin('f'));
ut_asserteq(-1, hex_to_bin('g'));
+
+ return 0;
}
DM_TEST(lib_test_hex_to_bin, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
extern u32 __dtb_test_fdt_overlay_begin;
extern u32 __dtb_test_fdt_overlay_stacked_begin;
+static void *fdt;
+
static int ut_fdt_getprop_u32_by_index(void *fdt, const char *path,
const char *name, int index,
u32 *out)
static int fdt_overlay_change_int_property(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
u32 val = 0;
ut_assertok(ut_fdt_getprop_u32(fdt, "/test-node", "test-int-property",
static int fdt_overlay_change_str_property(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
const char *val = NULL;
ut_assertok(fdt_getprop_str(fdt, "/test-node", "test-str-property",
static int fdt_overlay_add_str_property(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
const char *val = NULL;
ut_assertok(fdt_getprop_str(fdt, "/test-node", "test-str-property-2",
static int fdt_overlay_add_node_by_phandle(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
int off;
off = fdt_path_offset(fdt, "/test-node/new-node");
static int fdt_overlay_add_node_by_path(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
int off;
off = fdt_path_offset(fdt, "/new-node");
static int fdt_overlay_add_subnode_property(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
int off;
off = fdt_path_offset(fdt, "/test-node/sub-test-node");
static int fdt_overlay_local_phandle(struct unit_test_state *uts)
{
uint32_t local_phandle;
- void *fdt = uts->priv;
u32 val = 0;
int off;
static int fdt_overlay_local_phandles(struct unit_test_state *uts)
{
uint32_t local_phandle, test_phandle;
- void *fdt = uts->priv;
u32 val = 0;
int off;
static int fdt_overlay_stacked(struct unit_test_state *uts)
{
- void *fdt = uts->priv;
u32 val = 0;
ut_assertok(ut_fdt_getprop_u32(fdt, "/new-local-node",
void *fdt_base = &__dtb_test_fdt_base_begin;
void *fdt_overlay = &__dtb_test_fdt_overlay_begin;
void *fdt_overlay_stacked = &__dtb_test_fdt_overlay_stacked_begin;
- void *fdt_base_copy, *fdt_overlay_copy, *fdt_overlay_stacked_copy;
+ void *fdt_overlay_copy, *fdt_overlay_stacked_copy;
int ret = -ENOMEM;
uts = calloc(1, sizeof(*uts));
ut_assertok(fdt_check_header(fdt_base));
ut_assertok(fdt_check_header(fdt_overlay));
- fdt_base_copy = malloc(FDT_COPY_SIZE);
- if (!fdt_base_copy)
+ fdt = malloc(FDT_COPY_SIZE);
+ if (!fdt)
goto err1;
- uts->priv = fdt_base_copy;
fdt_overlay_copy = malloc(FDT_COPY_SIZE);
if (!fdt_overlay_copy)
* (and relocate it since the memory might be mapped
* read-only)
*/
- ut_assertok(fdt_open_into(fdt_base, fdt_base_copy, FDT_COPY_SIZE));
+ ut_assertok(fdt_open_into(fdt_base, fdt, FDT_COPY_SIZE));
/*
* Resize the overlay to 4k so that we have room to operate on
FDT_COPY_SIZE));
/* Apply the overlay */
- ut_assertok(fdt_overlay_apply(fdt_base_copy, fdt_overlay_copy));
+ ut_assertok(fdt_overlay_apply(fdt, fdt_overlay_copy));
/* Apply the stacked overlay */
- ut_assertok(fdt_overlay_apply(fdt_base_copy, fdt_overlay_stacked_copy));
+ ut_assertok(fdt_overlay_apply(fdt, fdt_overlay_stacked_copy));
ret = cmd_ut_category("overlay", tests, n_ents, argc, argv);
err3:
free(fdt_overlay_copy);
err2:
- free(fdt_base_copy);
+ free(fdt);
err1:
- free(uts);
-
return ret;
}
projects / oweals / u-boot.git / commitdiff