ARM: dts: Add support for stm32f746-evaluation board support
authorPatrice Chotard <patrice.chotard@st.com>
Fri, 16 Feb 2018 12:27:03 +0000 (13:27 +0100)
committerTom Rini <trini@konsulko.com>
Wed, 14 Mar 2018 01:45:37 +0000 (21:45 -0400)
This board offers:
  _ STM32F746NGH6 microcontroller with 1 Mbyte Flash and 320+4 Kbytes RAM
  _ Six 5 V power supply options:
        Power jack
        ST-LINK/V2-1 USB connector
        User USB HS connector
        User USB FS1 connector
        User USB FS2 connector
        Daughterboard
  _ SAI Audio DAC, stereo audio jack which supports headset with microphone
  _ Stereo digital microphone, audio jack connector used to connect
    external speakers
  _ 2 Gbytes (or more) SDMMC interface microSD card
  _ RF-EEPROM on I2C compatible serial interface
  _ RS-232 communication
  _ IrDA transceiver
  _ JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded
  _ IEEE-802.3-2002 compliant Ethernet connector
  _ Camera module
  _ 8Mx32 bit SDRAM, 1Mx16 bit SRAM & 8Mx16 bit Nor Flash
  _ 512 Mbits QuadSPI Nor Flash
  _ 5.7 inch 640x480 pixel TFT color LCD with capacitive touch panel
  _ Joystick with 4-direction control and selector
  _ Reset, WakeUp/Tamper or key button
  _ 4 color user LEDs
  _ Extension connectors & memory connectors for daughterboard or
    wrapping board
  _ USB OTG HS and FS with Micro-AB connectors
  _ RTC with backup battery
  _ CAN 2.0A/B compliant connection
  _ Potentiometer
  _ Motor control connector

More detailed information are available here :
http://www.st.com/en/evaluation-tools/stm32746g-eval.html

To compile stm32f746-eval board, use same defconfig as
stm32f746-disco, the only difference is to pass
"DEVICE_TREE=stm32746g-eval".

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas Manocha <vikas.manocha@st.com>
arch/arm/dts/Makefile
arch/arm/dts/stm32746g-eval.dts [new file with mode: 0644]

index 20a4c37d48af3ba016fb262be216bfdcd87b4cd1..f7971b65befc27f36ddb6a4bf50c5081009edd1c 100644 (file)
@@ -225,7 +225,8 @@ dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
        stm32f469-disco.dtb
 
 dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
-       stm32f769-disco.dtb
+       stm32f769-disco.dtb \
+       stm32746g-eval.dtb
 dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
        stm32h743i-eval.dtb
 
diff --git a/arch/arm/dts/stm32746g-eval.dts b/arch/arm/dts/stm32746g-eval.dts
new file mode 100644 (file)
index 0000000..4f6d38a
--- /dev/null
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2018 - Christophe Priouzeau <christophe.priouzeau@st.com>
+ *
+ * Based on:
+ * stm32f746-disco.dts from U-boot 2018.01
+ * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/memory/stm32-sdram.h>
+
+/ {
+       model = "STMicroelectronics STM32F746G-EVAL board";
+       compatible = "st,stm32f746g-eval", "st,stm32f746";
+
+       chosen {
+               bootargs = "root=/dev/mmcblk0p1 rw rootwait";
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory {
+               reg = <0xC0000000 0x2000000>;
+       };
+
+       aliases {
+               serial0 = &usart1;
+               spi0 = &qspi;
+               mmc0 = &sdio;
+               /* Aliases for gpios so as to use sequence */
+               gpio0 = &gpioa;
+               gpio1 = &gpiob;
+               gpio2 = &gpioc;
+               gpio3 = &gpiod;
+               gpio4 = &gpioe;
+               gpio5 = &gpiof;
+               gpio6 = &gpiog;
+               gpio7 = &gpioh;
+               gpio8 = &gpioi;
+               gpio9 = &gpioj;
+               gpio10 = &gpiok;
+       };
+
+       led1 {
+               compatible = "st,led1";
+               led-gpio = <&gpiof 10 0>;
+       };
+
+       button1 {
+               compatible = "st,button1";
+               button-gpio = <&gpioc 13 0>;
+       };
+};
+
+&clk_hse {
+       clock-frequency = <25000000>;
+};
+
+&pinctrl {
+       usart1_pins_a: usart1@0 {
+               pins1 {
+                      pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+                               bias-disable;
+                               drive-push-pull;
+                               slew-rate = <2>;
+               };
+               pins2 {
+                       pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+                       bias-disable;
+               };
+       };
+
+       ethernet_mii: mii@0 {
+             pins {
+                     pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+                            <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+                            <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+                            <STM32F746_PA2_FUNC_ETH_MDIO>,
+                            <STM32F746_PC1_FUNC_ETH_MDC>,
+                            <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+                            <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+                            <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+                            <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
+                     slew-rate = <2>;
+             };
+       };
+
+       fmc_pins: fmc@0 {
+               pins {
+                       pinmux = <STM32F746_PI10_FUNC_FMC_D31>, /* FMC_D31 */
+                                <STM32F746_PI9_FUNC_FMC_D30>,  /* FMC_D30*/
+                                <STM32F746_PI7_FUNC_FMC_D29>,  /* FMC_D29 */
+                                <STM32F746_PI6_FUNC_FMC_D28>,  /* FMC_D28 */
+                                <STM32F746_PI3_FUNC_FMC_D27>,  /* FMC_D27 */
+                                <STM32F746_PI2_FUNC_FMC_D26>,  /* FMC_D26 */
+                                <STM32F746_PI1_FUNC_FMC_D25>,  /* FMC_D25 */
+                                <STM32F746_PI0_FUNC_FMC_D24>,  /* FMC_D24 */
+                                <STM32F746_PH15_FUNC_FMC_D23>, /* FMC_D23 */
+                                <STM32F746_PH14_FUNC_FMC_D22>, /* FMC_D22 */
+                                <STM32F746_PH13_FUNC_FMC_D21>, /* FMC_D21 */
+                                <STM32F746_PH12_FUNC_FMC_D20>, /* FMC_D20 */
+                                <STM32F746_PH11_FUNC_FMC_D19>, /* FMC_D19 */
+                                <STM32F746_PH10_FUNC_FMC_D18>, /* FMC_D18 */
+                                <STM32F746_PH9_FUNC_FMC_D17>,  /* FMC_D17 */
+                                <STM32F746_PH8_FUNC_FMC_D16>,  /* FMC_D16 */
+
+                                <STM32F746_PD10_FUNC_FMC_D15>, /* FMC_D15 */
+                                <STM32F746_PD9_FUNC_FMC_D14>, /* FMC_D14*/
+                                <STM32F746_PD8_FUNC_FMC_D13>, /* FMC_D13 */
+                                <STM32F746_PE15_FUNC_FMC_D12>,/* FMC_D12 */
+                                <STM32F746_PE14_FUNC_FMC_D11>,/* FMC_D11 */
+                                <STM32F746_PE13_FUNC_FMC_D10>,/* FMC_D10 */
+                                <STM32F746_PE12_FUNC_FMC_D9>, /* FMC_D9 */
+                                <STM32F746_PE11_FUNC_FMC_D8>, /* FMC_D8 */
+                                <STM32F746_PE10_FUNC_FMC_D7>, /* FMC_D7 */
+                                <STM32F746_PE9_FUNC_FMC_D6>,  /* FMC_D6 */
+                                <STM32F746_PE8_FUNC_FMC_D5>,  /* FMC_D5*/
+                                <STM32F746_PE7_FUNC_FMC_D4>,  /* FMC_D4 */
+                                <STM32F746_PD1_FUNC_FMC_D3>,  /* FMC_D3 */
+                                <STM32F746_PD0_FUNC_FMC_D2>,  /* FMC_D2 */
+                                <STM32F746_PD15_FUNC_FMC_D1>, /* FMC_D1 */
+                                <STM32F746_PD14_FUNC_FMC_D0>, /* FMC_D0 */
+
+                                <STM32F746_PI5_FUNC_FMC_NBL3>, /* FMC_NBL3 */
+                                <STM32F746_PI4_FUNC_FMC_NBL2>, /* FMC_NBL2 */
+                                <STM32F746_PE1_FUNC_FMC_NBL1>, /* FMC_NBL1 */
+                                <STM32F746_PE0_FUNC_FMC_NBL0>, /* FMC_NBL0 */
+
+                                <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, /* FMC_A15 FMC_BA1 */
+                                <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, /* FMC_A14 FMC_BA0*/
+
+                                <STM32F746_PG1_FUNC_FMC_A11>, /* FMC_A11 */
+                                <STM32F746_PG0_FUNC_FMC_A10>, /* FMC_A10 */
+                                <STM32F746_PF15_FUNC_FMC_A9>, /* FMC_A9 */
+                                <STM32F746_PF14_FUNC_FMC_A8>, /* FMC_A8 */
+                                <STM32F746_PF13_FUNC_FMC_A7>, /* FMC_A7 */
+                                <STM32F746_PF12_FUNC_FMC_A6>, /* FMC_A6 */
+                                <STM32F746_PF5_FUNC_FMC_A5>,  /* FUNC_FMC_A5 */
+                                <STM32F746_PF4_FUNC_FMC_A4>,  /* FMC_A4 */
+                                <STM32F746_PF3_FUNC_FMC_A3>,  /* FMC_A3 */
+                                <STM32F746_PF2_FUNC_FMC_A2>,  /* FMC_A2 */
+                                <STM32F746_PF1_FUNC_FMC_A1>,  /* FMC_A1 */
+                                <STM32F746_PF0_FUNC_FMC_A0>,  /* FMC_A0 */
+
+                                <STM32F746_PH3_FUNC_FMC_SDNE0>,/* FMC_SDNE0 */
+                                <STM32F746_PH5_FUNC_FMC_SDNWE>, /* FMC_SDNWE */
+                                <STM32F746_PF11_FUNC_FMC_SDNRAS>, /* FMC_SDNRAS */
+                                <STM32F746_PG15_FUNC_FMC_SDNCAS>, /* FMC_SDNCAS */
+                                <STM32F746_PH2_FUNC_FMC_SDCKE0>, /* FMC_SDCKE0 */
+                                <STM32F746_PG8_FUNC_FMC_SDCLK>; /* FMC_SDCLK */
+                         slew-rate = <2>;
+               };
+       };
+};
+
+&usart1 {
+       pinctrl-0 = <&usart1_pins_a>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&mac {
+       status = "okay";
+       pinctrl-0 = <&ethernet_mii>;
+       phy-mode = "rmii";
+       phy-handle = <&phy0>;
+
+       mdio0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "snps,dwmac-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+               };
+       };
+};
+
+&fmc {
+       pinctrl-0 = <&fmc_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       /*
+        * Memory configuration from sdram datasheet IS42S32800G-6BLI
+        */
+       bank1: bank@0 {
+               st,sdram-control = /bits/ 8 <NO_COL_9 NO_ROW_12 MWIDTH_32 BANKS_4
+                                 CAS_2 SDCLK_3 RD_BURST_EN RD_PIPE_DL_0>;
+               st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_1 TRAS_1 TRC_6 TRP_2
+                                 TWR_1 TRCD_1>;
+               st,sdram-refcount = <1539>;
+       };
+};
+
+&sdio {
+       status = "okay";
+       pinctrl-names = "default", "opendrain";
+       pinctrl-0 = <&sdio_pins>;
+       pinctrl-1 = <&sdio_pins_od>;
+       bus-width = <4>;
+       max-frequency = <25000000>;
+};