dm: ls1021a: dts: Change address_cells and size_cells from 2 to 1
authorhaikun <haikun.wang@freescale.com>
Tue, 24 Mar 2015 13:16:31 +0000 (21:16 +0800)
committerSimon Glass <sjg@chromium.org>
Sat, 18 Apr 2015 17:11:17 +0000 (11:11 -0600)
Change address_cells and size_cells of root node and 'soc' node
from 2 to 1.

We backport ls1021a device tree source files from kernel to u-boot.
Kernel files set address_cells and size_cells to 2 in order to access
more than 4GB space.
But we don't have this requirement now and u-boot fdtdec_get_xxx interfaces
can't support property whose size is 'u64' completely.
So make this change.

Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
arch/arm/dts/ls1021a-qds.dts
arch/arm/dts/ls1021a-twr.dts
arch/arm/dts/ls1021a.dtsi

index c89f85e001fa653f1a6e1f56f1f41f70c7991ed8..7454ac6ca72a96b4e8e02b375d603b1fd778ba76 100644 (file)
        #address-cells = <2>;
        #size-cells = <1>;
        /* NOR, NAND Flashes and FPGA on board */
-       ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-                 0x2 0x0 0x0 0x7e800000 0x00010000
-                 0x3 0x0 0x0 0x7fb00000 0x00000100>;
+       ranges = <0x0 0x0 0x60000000 0x08000000
+                 0x2 0x0 0x7e800000 0x00010000
+                 0x3 0x0 0x7fb00000 0x00000100>;
        status = "okay";
 
        nor@0,0 {
index 34ac82d1075e5bf43fc7211d04147ea6eeeef30e..2f0481d5bcbd83c179b11c394313720889e7d049 100644 (file)
@@ -46,7 +46,7 @@
        #address-cells = <2>;
        #size-cells = <1>;
        /* NOR Flash on board */
-       ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+       ranges = <0x0 0x0 0x60000000 0x08000000>;
        status = "okay";
 
        nor@0,0 {
index 434b9384f210be6d0917738045b4ec611d404089..064d10c8b9a01916ecc8b306957388a784f83a3c 100644 (file)
@@ -6,7 +6,7 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#include "skeleton64.dtsi"
+#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -58,8 +58,8 @@
 
        soc {
                compatible = "simple-bus";
-               #address-cells = <2>;
-               #size-cells = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
                device_type = "soc";
                interrupt-parent = <&gic>;
                ranges;
                        compatible = "arm,cortex-a7-gic";
                        #interrupt-cells = <3>;
                        interrupt-controller;
-                       reg = <0x0 0x1401000 0x0 0x1000>,
-                             <0x0 0x1402000 0x0 0x1000>,
-                             <0x0 0x1404000 0x0 0x2000>,
-                             <0x0 0x1406000 0x0 0x2000>;
+                       reg = <0x1401000 0x1000>,
+                             <0x1402000 0x1000>,
+                             <0x1404000 0x2000>,
+                             <0x1406000 0x2000>;
                        interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 
                };
 
                ifc: ifc@1530000 {
                        compatible = "fsl,ifc", "simple-bus";
-                       reg = <0x0 0x1530000 0x0 0x10000>;
+                       reg = <0x1530000 0x10000>;
                        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                dcfg: dcfg@1ee0000 {
                        compatible = "fsl,ls1021a-dcfg", "syscon";
-                       reg = <0x0 0x1ee0000 0x0 0x10000>;
+                       reg = <0x1ee0000 0x10000>;
                        big-endian;
                };
 
                esdhc: esdhc@1560000 {
                        compatible = "fsl,esdhc";
-                       reg = <0x0 0x1560000 0x0 0x10000>;
+                       reg = <0x1560000 0x10000>;
                        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <0>;
                        voltage-ranges = <1800 1800 3300 3300>;
 
                scfg: scfg@1570000 {
                        compatible = "fsl,ls1021a-scfg", "syscon";
-                       reg = <0x0 0x1570000 0x0 0x10000>;
+                       reg = <0x1570000 0x10000>;
                        big-endian;
                };
 
                clockgen: clocking@1ee1000 {
                        #address-cells = <1>;
                        #size-cells = <1>;
-                       ranges = <0x0 0x0 0x1ee1000 0x10000>;
+                       ranges = <0x0 0x1ee1000 0x10000>;
 
                        sysclk: sysclk {
                                compatible = "fixed-clock";
                        compatible = "fsl,vf610-dspi";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0x0 0x2100000 0x0 0x10000>;
+                       reg = <0x2100000 0x10000>;
                        interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "dspi";
                        clocks = <&platform_clk 1>;
                        compatible = "fsl,vf610-dspi";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0x0 0x2110000 0x0 0x10000>;
+                       reg = <0x2110000 0x10000>;
                        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "dspi";
                        clocks = <&platform_clk 1>;
                        compatible = "fsl,vf610-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0x0 0x2180000 0x0 0x10000>;
+                       reg = <0x2180000 0x10000>;
                        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "i2c";
                        clocks = <&platform_clk 1>;
                        compatible = "fsl,vf610-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0x0 0x2190000 0x0 0x10000>;
+                       reg = <0x2190000 0x10000>;
                        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "i2c";
                        clocks = <&platform_clk 1>;
                        compatible = "fsl,vf610-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0x0 0x21a0000 0x0 0x10000>;
+                       reg = <0x21a0000 0x10000>;
                        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "i2c";
                        clocks = <&platform_clk 1>;
 
                uart0: serial@21c0500 {
                        compatible = "fsl,16550-FIFO64", "ns16550a";
-                       reg = <0x0 0x21c0500 0x0 0x100>;
+                       reg = <0x21c0500 0x100>;
                        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <0>;
                        fifo-size = <15>;
 
                uart1: serial@21c0600 {
                        compatible = "fsl,16550-FIFO64", "ns16550a";
-                       reg = <0x0 0x21c0600 0x0 0x100>;
+                       reg = <0x21c0600 0x100>;
                        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <0>;
                        fifo-size = <15>;
 
                uart2: serial@21d0500 {
                        compatible = "fsl,16550-FIFO64", "ns16550a";
-                       reg = <0x0 0x21d0500 0x0 0x100>;
+                       reg = <0x21d0500 0x100>;
                        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <0>;
                        fifo-size = <15>;
 
                uart3: serial@21d0600 {
                        compatible = "fsl,16550-FIFO64", "ns16550a";
-                       reg = <0x0 0x21d0600 0x0 0x100>;
+                       reg = <0x21d0600 0x100>;
                        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <0>;
                        fifo-size = <15>;
 
                lpuart0: serial@2950000 {
                        compatible = "fsl,ls1021a-lpuart";
-                       reg = <0x0 0x2950000 0x0 0x1000>;
+                       reg = <0x2950000 0x1000>;
                        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&sysclk>;
                        clock-names = "ipg";
 
                lpuart1: serial@2960000 {
                        compatible = "fsl,ls1021a-lpuart";
-                       reg = <0x0 0x2960000 0x0 0x1000>;
+                       reg = <0x2960000 0x1000>;
                        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "ipg";
 
                lpuart2: serial@2970000 {
                        compatible = "fsl,ls1021a-lpuart";
-                       reg = <0x0 0x2970000 0x0 0x1000>;
+                       reg = <0x2970000 0x1000>;
                        interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "ipg";
 
                lpuart3: serial@2980000 {
                        compatible = "fsl,ls1021a-lpuart";
-                       reg = <0x0 0x2980000 0x0 0x1000>;
+                       reg = <0x2980000 0x1000>;
                        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "ipg";
 
                lpuart4: serial@2990000 {
                        compatible = "fsl,ls1021a-lpuart";
-                       reg = <0x0 0x2990000 0x0 0x1000>;
+                       reg = <0x2990000 0x1000>;
                        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "ipg";
 
                lpuart5: serial@29a0000 {
                        compatible = "fsl,ls1021a-lpuart";
-                       reg = <0x0 0x29a0000 0x0 0x1000>;
+                       reg = <0x29a0000 0x1000>;
                        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "ipg";
 
                wdog0: watchdog@2ad0000 {
                        compatible = "fsl,imx21-wdt";
-                       reg = <0x0 0x2ad0000 0x0 0x10000>;
+                       reg = <0x2ad0000 0x10000>;
                        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "wdog-en";
 
                sai1: sai@2b50000 {
                        compatible = "fsl,vf610-sai";
-                       reg = <0x0 0x2b50000 0x0 0x10000>;
+                       reg = <0x2b50000 0x10000>;
                        interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "sai";
 
                sai2: sai@2b60000 {
                        compatible = "fsl,vf610-sai";
-                       reg = <0x0 0x2b60000 0x0 0x10000>;
+                       reg = <0x2b60000 0x10000>;
                        interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&platform_clk 1>;
                        clock-names = "sai";
                edma0: edma@2c00000 {
                        #dma-cells = <2>;
                        compatible = "fsl,vf610-edma";
-                       reg = <0x0 0x2c00000 0x0 0x10000>,
-                             <0x0 0x2c10000 0x0 0x10000>,
-                             <0x0 0x2c20000 0x0 0x10000>;
+                       reg = <0x2c00000 0x10000>,
+                             <0x2c10000 0x10000>,
+                             <0x2c20000 0x10000>;
                        interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "edma-tx", "edma-err";
                        device_type = "mdio";
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       reg = <0x0 0x2d24000 0x0 0x4000>;
+                       reg = <0x2d24000 0x4000>;
                };
 
                usb@8600000 {
                        compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
-                       reg = <0x0 0x8600000 0x0 0x1000>;
+                       reg = <0x8600000 0x1000>;
                        interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
                        dr_mode = "host";
                        phy_type = "ulpi";
 
                usb3@3100000 {
                        compatible = "snps,dwc3";
-                       reg = <0x0 0x3100000 0x0 0x10000>;
+                       reg = <0x3100000 0x10000>;
                        interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
                        dr_mode = "host";
                };