+++ /dev/null
-/*
- * This file is a modified version of bzlib.h from the bzip2-1.0.2
- * distribution which can be found at http://sources.redhat.com/bzip2/
- */
-
-/*-------------------------------------------------------------*/
-/*--- Public header file for the library. ---*/
-/*--- bzlib.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_H
-#define _BZLIB_H
-
-/* Configure for U-Boot environment */
-#define BZ_NO_STDIO
-#define BZ_NO_COMPRESS
-/* End of configuration for U-Boot environment */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BZ_RUN 0
-#define BZ_FLUSH 1
-#define BZ_FINISH 2
-
-#define BZ_OK 0
-#define BZ_RUN_OK 1
-#define BZ_FLUSH_OK 2
-#define BZ_FINISH_OK 3
-#define BZ_STREAM_END 4
-#define BZ_SEQUENCE_ERROR (-1)
-#define BZ_PARAM_ERROR (-2)
-#define BZ_MEM_ERROR (-3)
-#define BZ_DATA_ERROR (-4)
-#define BZ_DATA_ERROR_MAGIC (-5)
-#define BZ_IO_ERROR (-6)
-#define BZ_UNEXPECTED_EOF (-7)
-#define BZ_OUTBUFF_FULL (-8)
-#define BZ_CONFIG_ERROR (-9)
-
-typedef
- struct {
- char *next_in;
- unsigned int avail_in;
- unsigned int total_in_lo32;
- unsigned int total_in_hi32;
-
- char *next_out;
- unsigned int avail_out;
- unsigned int total_out_lo32;
- unsigned int total_out_hi32;
-
- void *state;
-
- void *(*bzalloc)(void *,int,int);
- void (*bzfree)(void *,void *);
- void *opaque;
- }
- bz_stream;
-
-
-#ifndef BZ_IMPORT
-#define BZ_EXPORT
-#endif
-
-#ifdef _WIN32
-# include <windows.h>
-# ifdef small
- /* windows.h define small to char */
-# undef small
-# endif
-# ifdef BZ_EXPORT
-# define BZ_API(func) WINAPI func
-# define BZ_EXTERN extern
-# else
- /* import windows dll dynamically */
-# define BZ_API(func) (WINAPI * func)
-# define BZ_EXTERN
-# endif
-#else
-# define BZ_API(func) func
-# define BZ_EXTERN extern
-#endif
-
-
-/*-- Core (low-level) library functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressInit) (
- bz_stream* strm,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompress) (
- bz_stream* strm,
- int action
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) (
- bz_stream* strm
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) (
- bz_stream *strm,
- int verbosity,
- int small
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompress) (
- bz_stream* strm
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) (
- bz_stream *strm
- );
-
-
-/*-- High(er) level library functions --*/
-
-#ifndef BZ_NO_STDIO
-#define BZ_MAX_UNUSED 5000
-
-/* Need a definitition for FILE */
-#include <stdio.h>
-
-typedef void BZFILE;
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) (
- int* bzerror,
- FILE* f,
- int verbosity,
- int small,
- void* unused,
- int nUnused
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadClose) (
- int* bzerror,
- BZFILE* b
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) (
- int* bzerror,
- BZFILE* b,
- void** unused,
- int* nUnused
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzRead) (
- int* bzerror,
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) (
- int* bzerror,
- FILE* f,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWrite) (
- int* bzerror,
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose) (
- int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in,
- unsigned int* nbytes_out
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) (
- int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in_lo32,
- unsigned int* nbytes_in_hi32,
- unsigned int* nbytes_out_lo32,
- unsigned int* nbytes_out_hi32
- );
-#endif
-
-
-/*-- Utility functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) (
- char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) (
- char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int small,
- int verbosity
- );
-
-
-/*--
- Code contributed by Yoshioka Tsuneo
- (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
- to support better zlib compatibility.
- This code is not _officially_ part of libbzip2 (yet);
- I haven't tested it, documented it, or considered the
- threading-safeness of it.
- If this code breaks, please contact both Yoshioka and me.
---*/
-
-BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
- void
- );
-
-#ifndef BZ_NO_STDIO
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
- const char *path,
- const char *mode
- );
-
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
- int fd,
- const char *mode
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzread) (
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzwrite) (
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzflush) (
- BZFILE* b
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzclose) (
- BZFILE* b
- );
-
-BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
- BZFILE *b,
- int *errnum
- );
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/*-------------------------------------------------------------*/
-/*--- end bzlib.h ---*/
-/*-------------------------------------------------------------*/
+++ /dev/null
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- * ==FILEVERSION 960122==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 0.95, Aug 16th, 1995.
-
- Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- gzip@prep.ai.mit.edu madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */ /* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
- The library does not install any signal handler. It is recommended to
- add at least a handler for SIGSEGV when decompressing; the library checks
- the consistency of the input data whenever possible but may go nuts
- for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-# define STDC
-# endif
-#endif
-
-#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-# include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-#ifndef FAR
-# define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- 1 << (windowBits+2) + 1 << (memLevel+9)
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-typedef unsigned char Byte; /* 8 bits */
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms may be added later and will have the same
- stream interface.
-
- For compression the application must provide the output buffer and
- may optionally provide the input buffer for optimization. For decompression,
- the application must provide the input buffer and may optionally provide
- the output buffer for optimization.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes));
-
-typedef void (*cb_func) OF((Bytef *buf, uInt len));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidp opaque; /* private data object passed to zalloc and zfree */
-
- Byte data_type; /* best guess about the data type: ascii or binary */
-
- cb_func outcb; /* called regularly just before blocks of output */
-
-} z_stream;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH 2
-#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */
-#define Z_FINISH 4
-#define Z_PACKET_FLUSH 5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Used to set the data_type field */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- */
-
- /* basic functions */
-
-extern int inflateInit OF((z_stream *strm));
-/*
- Initializes the internal stream state for decompression. The fields
- zalloc and zfree must be initialized before by the caller. If zalloc and
- zfree are set to Z_NULL, inflateInit updates them to use default allocation
- functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory. msg is set to null if there is no error message.
- inflateInit does not perform any decompression: this will be done by
- inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() always provides as much output as possible
- (until there is no more input data or no more space in the output buffer).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate().
-
- If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
- inflate flushes as much output as possible to the output buffer. The
- flushing behavior of inflate is not specified for values of the flush
- parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
- current implementation actually flushes as much output as possible
- anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
- has been consumed, it is expecting to see the length field of a stored
- block; if not, it returns Z_DATA_ERROR.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- inflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if the end of the
- compressed data has been reached and all uncompressed output has been
- produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
- the stream structure was inconsistent (for example if next_in or next_out
- was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
- progress is possible or if there was not enough room in the output buffer
- when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
- call inflateSync to look for a good compression block. */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* advanced functions */
-
-extern int inflateInit2 OF((z_stream *strm,
- int windowBits));
-/*
- This is another version of inflateInit with more compression options. The
- fields next_out, zalloc and zfree must be initialized before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library (the value 16 will be allowed soon). The
- default value is 15 if inflateInit is used instead. If a compressed stream
- with a larger window size is given as input, inflate() will return with
- the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
- If next_out is not null, the library will use this buffer for the history
- buffer; the buffer must either be large enough to hold the entire output
- data, or have at least 1<<windowBits bytes. If next_out is null, the
- library will allocate its own buffer (and leave next_out null). next_in
- need not be provided here but must be provided by the application for the
- next call of inflate().
-
- If the history buffer is provided by the application, next_out must
- never be changed by the application since the decompressor maintains
- history information inside this buffer from call to call; the application
- can only reset next_out to the beginning of the history buffer when
- avail_out is zero and all output has been consumed.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- windowBits < 8). msg is set to null if there is no error message.
- inflateInit2 does not perform any decompression: this will be done by
- inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/*
- Skips invalid compressed data until the special marker (see deflate()
- above) can be found, or until all available input is skipped. No output
- is provided.
-
- inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no marker has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
- This function adds the data at next_in (avail_in bytes) to the output
- history without performing any output. There must be no pending output,
- and the decompressor must be expecting to see the start of a block.
- Calling this function is equivalent to decompressing a stored block
- containing the data at next_in (except that the data is not output).
-*/
-
- /* checksum functions */
-
-/*
- This function is not related to compression but is exported
- anyway because it might be useful in applications using the
- compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
projects / oweals / u-boot_mod.git / commitdiff