sensible and noticable "Config.h".
-Erik
0.47
- * Tons of bugfixes.
* A bug in syslogd was fixed that allowed it to potentially fork-bomb
your system.
+ * Renamed busybox.defs.h to the more sensible "Config.h"
+ * Improved portability between different libcs.
+ * Many apps ported to use getopt()
+ * Common handling of '--help'
+ * All usage messages centralized.
+ * Added a bunch of new commands:
+ * 'rdate' contributed by Sterling Huxley <sterling@europa.com>
+ * 'wget' contributed by Chip Rosenthal <chip@unicom.com>,
+ <crosenth@covad.com> and Covad Communications
+ * 'getopt' from "Alfred M. Szmidt" <ams@trillian.itslinux.org>
+ * dos2unix, unix2dos, reset, and unrpm.c (and lots of help
+ debugging) thanks to robotti@metconnect.com.
+ * 'renice' command, thanks to Dave Cinege <dcinege@psychosis.com>
+ * 'xargs' (written by me)
+ * 'expr' contributed by Edward Betts <edward@debian.org>, based
+ on GNY expr
+ * lsmod now uses the query_module syscall, rather then /proc (me)
+ * syslogd can now log messages to remote hosts -- patch thanks
+ to Gyepi Sam <gyepi@praxis-sw.com>
* chroot can now call the builtin shell - Pavel Roskin <proski@gnu.org>
- * added 'renice' command, thanks to Dave Cinege <dcinege@psychosis.com>
* 'make install' now creates relative symlinks, and added a new
'make install-hardlinks' target to (tada) install hardlinks.
- * syslogd can now log messages to remote hosts -- patch thanks
- to Gyepi Sam <gyepi@praxis-sw.com>
* Rewrite of 'tail' to make it simpler, smaller, and more robust.
It now weighs only 2.25k (3k when full featured). The code is
cleaner too, thanks to Allen Soard <esp-software@mail.hypermart.net>
* Add optional ls file sorting, thanks to a patch from
Sterling Huxley <sterling@europa.com>
- * Added 'rdate' command from Sterling Huxley <sterling@europa.com>
- * Added 'wget' command, contributed by Chip Rosenthal <chip@unicom.com>,
- <crosenth@covad.com> and Covad Communications
- * Added 'getopt' from "Alfred M. Szmidt" <ams@trillian.itslinux.org>
- * Added dos2unix, unix2dos, and unrpm.c thanks to robotti@metconnect.com.
- * Added xargs (written by me)
- * lsmod now uses the query_module syscall, rather then /proc (me)
* Fixed chmod option parsing so things like 'chmod -r /tmp/file'
- wouldn't work (since it thought -r was an option). Doh!
+ now work (previously it thought -r was an option). Doh!
* Fixed tar handling of stdin and stdout
- * Many apps ported to use getopt()
- * All usage messages centralized.
- * Common handling of '--help'
- * Improved portability between different libcs.
+ * Preliminary support for GNU HURD.
+ * Tons of other bugfixes.
-Erik Andersen
--- /dev/null
+/* vi: set sw=4 ts=4: */
+// This file defines the feature set to be compiled into busybox.
+// When you turn things off here, they won't be compiled in at all.
+//
+//// This file is parsed by sed. You MUST use single line comments.
+// i.e. //#define BB_BLAH
+//
+//
+// BusyBox Applications
+#define BB_AR
+#define BB_BASENAME
+#define BB_CAT
+#define BB_CHMOD_CHOWN_CHGRP
+#define BB_CHROOT
+#define BB_CHVT
+#define BB_CLEAR
+#define BB_CP_MV
+#define BB_CUT
+#define BB_DATE
+#define BB_DC
+#define BB_DD
+#define BB_DEALLOCVT
+#define BB_DF
+#define BB_DIRNAME
+#define BB_DMESG
+#define BB_DOS2UNIX
+#define BB_DUTMP
+#define BB_DU
+#define BB_DUMPKMAP
+#define BB_ECHO
+#define BB_EXPR
+#define BB_FBSET
+#define BB_FDFLUSH
+#define BB_FIND
+#define BB_FREE
+#define BB_FREERAMDISK
+#define BB_FSCK_MINIX
+#define BB_GETOPT
+#define BB_GREP
+#define BB_GUNZIP
+#define BB_GZIP
+#define BB_HALT
+#define BB_HEAD
+#define BB_HOSTID
+#define BB_HOSTNAME
+#define BB_ID
+#define BB_INIT
+#define BB_INSMOD
+#define BB_KILL
+#define BB_KILLALL
+#define BB_LENGTH
+#define BB_LN
+#define BB_LOADACM
+#define BB_LOADFONT
+#define BB_LOADKMAP
+#define BB_LOGGER
+#define BB_LOGNAME
+#define BB_LS
+#define BB_LSMOD
+#define BB_MAKEDEVS
+#define BB_MD5SUM
+#define BB_MKDIR
+#define BB_MKFIFO
+#define BB_MKFS_MINIX
+#define BB_MKNOD
+#define BB_MKSWAP
+#define BB_MKTEMP
+#define BB_NC
+#define BB_MORE
+#define BB_MOUNT
+#define BB_MT
+#define BB_NSLOOKUP
+#define BB_PING
+#define BB_POWEROFF
+#define BB_PRINTF
+#define BB_PS
+#define BB_PWD
+#define BB_RDATE
+#define BB_REBOOT
+#define BB_RENICE
+#define BB_RESET
+#define BB_RM
+#define BB_RMDIR
+#define BB_RMMOD
+#define BB_SED
+#define BB_SETKEYCODES
+#define BB_SH
+#define BB_SLEEP
+#define BB_SORT
+#define BB_SWAPONOFF
+#define BB_SYNC
+#define BB_SYSLOGD
+#define BB_TAIL
+#define BB_TAR
+#define BB_TEE
+#define BB_TEST
+#define BB_TELNET
+#define BB_TOUCH
+#define BB_TR
+#define BB_TRUE_FALSE
+#define BB_TTY
+#define BB_UNRPM
+#define BB_UPTIME
+#define BB_USLEEP
+#define BB_WC
+#define BB_WGET
+#define BB_WHICH
+#define BB_WHOAMI
+#define BB_UUENCODE
+#define BB_UUDECODE
+#define BB_UMOUNT
+#define BB_UNIQ
+#define BB_UNAME
+#define BB_UNIX2DOS
+#define BB_UPDATE
+#define BB_XARGS
+#define BB_YES
+// End of Applications List
+//
+//
+//
+// ---------------------------------------------------------
+// This is where feature definitions go. Generally speaking,
+// turning this stuff off makes things a bit smaller (and less
+// pretty/useful).
+//
+//
+//
+// Turn this on to use Erik's very cool devps, devmtab, etc kernel drivers,
+// thereby eliminating the need for the /proc filesystem and thereby saving
+// lots and lots memory for more important things. You can not use this and
+// USE_PROCFS at the same time... NOTE: If you enable this feature, you
+// _must_ have patched the kernel to include the devps patch that is included
+// in the busybox/kernel-patches directory. You will also need to create some
+// device special files in /dev on your embedded system:
+// mknod /dev/modules c 10 23
+// mknod /dev/mtab c 10 22
+// mknod /dev/ps c 10 21
+// I emailed Linus and this patch will not be going into the stock kernel.
+//#define BB_FEATURE_USE_DEVPS_PATCH
+//
+// enable features that use the /proc filesystem (apps that
+// break without this will tell you on compile)...
+// You can't use this and BB_FEATURE_USE_DEVPS_PATCH
+// at the same time...
+#define BB_FEATURE_USE_PROCFS
+//
+// This compiles out everything but the most
+// trivial --help usage information (i.e. reduces binary size)
+//#define BB_FEATURE_TRIVIAL_HELP
+//
+// Use termios to manipulate the screen ('more' is prettier with this on)
+#define BB_FEATURE_USE_TERMIOS
+//
+// calculate terminal & column widths (for more and ls)
+#define BB_FEATURE_AUTOWIDTH
+//
+// show username/groupnames (bypasses libc6 NSS) for ls
+#define BB_FEATURE_LS_USERNAME
+//
+// show file timestamps in ls
+#define BB_FEATURE_LS_TIMESTAMPS
+//
+// enable ls -p and -F
+#define BB_FEATURE_LS_FILETYPES
+//
+// sort the file names (still a bit buggy)
+#define BB_FEATURE_LS_SORTFILES
+//
+// enable ls -R
+#define BB_FEATURE_LS_RECURSIVE
+//
+// enable ls -L
+#define BB_FEATURE_LS_FOLLOWLINKS
+//
+// Change ping implementation -- simplified, featureless, but really small.
+//#define BB_FEATURE_SIMPLE_PING
+//
+// Make init use a simplified /etc/inittab file (recommended).
+#define BB_FEATURE_USE_INITTAB
+//
+//Enable init being called as /linuxrc
+#define BB_FEATURE_LINUXRC
+//
+//Have init enable core dumping for child processes (for debugging only)
+//#define BB_FEATURE_INIT_COREDUMPS
+//
+// Allow init to permenently chroot, and umount the old root fs
+// just like an initrd does. Requires a kernel patch by Werner Almesberger.
+// ftp://icaftp.epfl.ch/pub/people/almesber/misc/umount-root-*.tar.gz
+//#define BB_FEATURE_INIT_CHROOT
+//
+//Make sure nothing is printed to the console on boot
+#define BB_FEATURE_EXTRA_QUIET
+//
+//Should syslogd also provide klogd support?
+#define BB_FEATURE_KLOGD
+//
+// enable syslogd -R remotehost
+#define BB_FEATURE_REMOTE_LOG
+//
+//Simple tail implementation (2.34k vs 3k for the full one).
+//Both provide 'tail -f' support (only one file at a time.)
+#define BB_FEATURE_SIMPLE_TAIL
+//
+// Enable support for loop devices in mount
+#define BB_FEATURE_MOUNT_LOOP
+//
+// Enable support for a real /etc/mtab file instead of /proc/mounts
+//#define BB_FEATURE_MOUNT_MTAB_SUPPORT
+//
+// Enable support for mounting remote NFS volumes
+#define BB_FEATURE_NFSMOUNT
+//
+// Enable support forced filesystem unmounting
+// (i.e. in case of an unreachable NFS system).
+#define BB_FEATURE_MOUNT_FORCE
+//
+// Enable support for creation of tar files.
+#define BB_FEATURE_TAR_CREATE
+//
+// Enable support for "--exclude" for excluding files
+#define BB_FEATURE_TAR_EXCLUDE
+//
+// Enable support for s///p pattern matching
+#define BB_FEATURE_SED_PATTERN_SPACE
+//
+//// Enable reverse sort
+#define BB_FEATURE_SORT_REVERSE
+//
+// Enable command line editing in the shell
+#define BB_FEATURE_SH_COMMAND_EDITING
+//
+//Allow the shell to invoke all the compiled in BusyBox commands as if they
+//were shell builtins. Nice for staticly linking an emergency rescue shell
+//among other thing.
+#define BB_FEATURE_SH_STANDALONE_SHELL
+//
+// Enable tab completion in the shell (not yet
+// working very well -- so don't turn this on)
+//#define BB_FEATURE_SH_TAB_COMPLETION
+//
+//Turn on extra fbset options
+//#define BB_FEATURE_FBSET_FANCY
+//
+//Turn on fbset readmode support
+//#define BB_FEATURE_FBSET_READMODE
+//
+// You must enable one or both of these features
+// Support installing modules from pre 2.1 kernels
+//#define BB_FEATURE_INSMOD_OLD_KERNEL
+// Support installing modules from kernel versions after 2.1.18
+#define BB_FEATURE_INSMOD_NEW_KERNEL
+//
+// Support module version checking
+//#define BB_FEATURE_INSMOD_VERSION_CHECKING
+//
+// Support for Minix filesystem, version 2
+//#define BB_FEATURE_MINIX2
+//
+//
+// Enable busybox --install [-s]
+// to create links (or symlinks) for all the commands that are
+// compiled into the binary. (needs /proc filesystem)
+// #define BB_FEATURE_INSTALLER
+//
+// Clean up all memory before exiting -- usually not needed
+// as the OS can clean up... Don't enable this unless you
+// have a really good reason for cleaning things up manually.
+//#define BB_FEATURE_CLEAN_UP
+//
+// End of Features List
+//
+//
+//
+//
+//
+//
+//---------------------------------------------------
+// Nothing beyond this point should ever be touched by
+// mere mortals so leave this stuff alone.
+//
+#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
+#define BB_MTAB
+#endif
+//
+#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
+#define BB_CMDEDIT
+#endif
+//
+#ifdef BB_KILLALL
+#ifndef BB_KILL
+#define BB_KILL
+#endif
+#endif
+//
+#ifdef BB_FEATURE_LINUXRC
+#ifndef BB_INIT
+#define BB_INIT
+#endif
+#define BB_LINUXRC
+#endif
+//
+#ifdef BB_GZIP
+#ifndef BB_GUNZIP
+#define BB_GUNZIP
+#endif
+#endif
+//
+#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
+#define BB_NFSMOUNT
+#endif
+//
+#if defined BB_FEATURE_SH_COMMAND_EDITING
+#ifndef BB_FEATURE_USE_TERMIOS
+#define BB_FEATURE_USE_TERMIOS
+#endif
+#endif
+//
+#if defined BB_FEATURE_AUTOWIDTH
+#ifndef BB_FEATURE_USE_TERMIOS
+#define BB_FEATURE_USE_TERMIOS
+#endif
+#endif
+//
+#if defined BB_INSMOD
+#ifndef BB_FEATURE_INSMOD_OLD_KERNEL
+#define BB_FEATURE_INSMOD_NEW_KERNEL
+#endif
+#endif
--- /dev/null
+/* vi: set sw=4 ts=4: */
+
+// NOTE: This file only defines features usefull under the Hurd,
+// To compile for the Hurd raname this to Config.h prior to make
+
+// This file defines the feature set to be compiled into busybox.
+// When you turn things off here, they won't be compiled in at all.
+//
+//// This file is parsed by sed. You MUST use single line comments.
+// i.e. //#define BB_BLAH
+//
+//
+// BusyBox Applications
+#define BB_AR
+#define BB_BASENAME
+#define BB_CAT
+#define BB_CHMOD_CHOWN_CHGRP
+#define BB_CHROOT
+//#define BB_CHVT /* not needed */
+#define BB_CLEAR
+#define BB_CP_MV
+#define BB_CUT
+#define BB_DATE
+#define BB_DC
+#define BB_DD
+//#define BB_DEALLOCVT /* inot needed */
+//#define BB_DF /* different implementation */
+#define BB_DIRNAME
+//#define BB_DMESG /* doesnt compile, different implementation */
+#define BB_DUTMP
+#define BB_DU
+//#define BB_DUMPKMAP /* not needed */
+#define BB_ECHO
+#define BB_EXPR
+//#define BB_FBSET /* not needed, doesnt compile */
+//#define BB_FDFLUSH /* is this needed? */
+#define BB_FIND
+//#define BB_FREE /* doesnt compile */
+#define BB_FREERAMDISK /* does hurd support ramdisks ? */
+#define BB_FSCK_MINIX
+#define BB_GETOPT
+#define BB_GREP
+#define BB_GUNZIP
+#define BB_GZIP
+#define BB_HALT
+#define BB_HEAD
+#define BB_HOSTID
+#define BB_HOSTNAME
+#define BB_ID
+//#define BB_INIT /* not needed?, doesnt compile */
+//#define BB_INSMOD /* not needed, doesnt compile */
+#define BB_KILL
+#define BB_KILLALL
+#define BB_LENGTH
+#define BB_LN
+//#define BB_LOADACM /* not needed, doesnt compile */
+//#define BB_LOADFONT /* not needed, doesnt compile */
+//#define BB_LOADKMAP /* not needed */
+#define BB_LOGGER
+#define BB_LOGNAME
+#define BB_LS
+//#define BB_LSMOD /* not needed, doesnt compile */
+//#define BB_MAKEDEVS /* different implementation */
+#define BB_MD5SUM
+#define BB_MKDIR
+#define BB_MKFIFO
+#define BB_MKFS_MINIX
+#define BB_MKNOD
+//#define BB_MKSWAP /* different impelementation (i think) */
+#define BB_MKTEMP
+#define BB_NC
+#define BB_MORE
+//#define BB_MOUNT /* different implementation */
+#define BB_MT
+#define BB_NSLOOKUP
+//#define BB_PING /* doesnt compile, Hurd uses BSD style ip.h */
+//#define BB_POWEROFF /* different implementation i assume */
+#define BB_PRINTF
+//#define BB_PS /* needs /proc */
+#define BB_PWD
+#define BB_RDATE
+//#define BB_REBOOT /* different implementation */
+#define BB_RENICE
+#define BB_RESET
+#define BB_RM
+#define BB_RMDIR
+//#define BB_RMMOD /* not needed, doesnt compile */
+#define BB_SED
+//#define BB_SETKEYCODES /* is this needed ? */
+#define BB_SH
+#define BB_SLEEP
+#define BB_SORT
+//#define BB_SWAPONOFF /* different implementation, doesnt compile */
+#define BB_SYNC
+//#define BB_SYSLOGD /* doesnt compile */
+#define BB_TAIL
+#define BB_TAR
+#define BB_TEE
+#define BB_TEST
+#define BB_TELNET
+#define BB_TOUCH
+#define BB_TR
+#define BB_TRUE_FALSE
+#define BB_TTY
+//#define BB_UPTIME /* doesnt compile */
+#define BB_USLEEP
+#define BB_WC
+#define BB_WGET
+#define BB_WHICH
+#define BB_WHOAMI
+#define BB_UUENCODE
+#define BB_UUDECODE
+//#define BB_UMOUNT /* different implementation */
+#define BB_UNIQ
+//#define BB_UNAME /* doesnt compile */
+//#define BB_UPDATE /* doesnt compile */
+#define BB_YES
+// End of Applications List
+//
+//
+//
+// ---------------------------------------------------------
+// This is where feature definitions go. Generally speaking,
+// turning this stuff off makes things a bit smaller (and less
+// pretty/useful).
+//
+//
+//
+// Turn this on to use Erik's very cool devps, devmtab, etc kernel drivers,
+// thereby eliminating the need for the /proc filesystem and thereby saving
+// lots and lots memory for more important things. You can not use this and
+// USE_PROCFS at the same time... NOTE: If you enable this feature, you
+// _must_ have patched the kernel to include the devps patch that is included
+// in the busybox/kernel-patches directory. You will also need to create some
+// device special files in /dev on your embedded system:
+// mknod /dev/modules c 10 23
+// mknod /dev/mtab c 10 22
+// mknod /dev/ps c 10 21
+// I emailed Linus and this patch will not be going into the stock kernel.
+//#define BB_FEATURE_USE_DEVPS_PATCH
+//
+// enable features that use the /proc filesystem (apps that
+// break without this will tell you on compile)...
+// You can't use this and BB_FEATURE_USE_DEVPS_PATCH
+// at the same time...
+#define BB_FEATURE_USE_PROCFS
+//
+// This compiles out everything but the most
+// trivial --help usage information (i.e. reduces binary size)
+//#define BB_FEATURE_TRIVIAL_HELP
+//
+// Use termios to manipulate the screen ('more' is prettier with this on)
+#define BB_FEATURE_USE_TERMIOS
+//
+// calculate terminal & column widths (for more and ls)
+#define BB_FEATURE_AUTOWIDTH
+//
+// show username/groupnames (bypasses libc6 NSS) for ls
+#define BB_FEATURE_LS_USERNAME
+//
+// show file timestamps in ls
+#define BB_FEATURE_LS_TIMESTAMPS
+//
+// enable ls -p and -F
+#define BB_FEATURE_LS_FILETYPES
+//
+// sort the file names (still a bit buggy)
+#define BB_FEATURE_LS_SORTFILES
+//
+// enable ls -R
+#define BB_FEATURE_LS_RECURSIVE
+//
+// Change ping implementation -- simplified, featureless, but really small.
+#define BB_FEATURE_SIMPLE_PING
+//
+// Make init use a simplified /etc/inittab file (recommended).
+#define BB_FEATURE_USE_INITTAB
+//
+//Enable init being called as /linuxrc
+//#define BB_FEATURE_LINUXRC
+//
+//Have init enable core dumping for child processes (for debugging only)
+//#define BB_FEATURE_INIT_COREDUMPS
+//
+// Allow init to permenently chroot, and umount the old root fs
+// just like an initrd does. Requires a kernel patch by Werner Almesberger.
+// ftp://icaftp.epfl.ch/pub/people/almesber/misc/umount-root-*.tar.gz
+//#define BB_FEATURE_INIT_CHROOT
+//
+//Make sure nothing is printed to the console on boot
+#define BB_FEATURE_EXTRA_QUIET
+//
+//Should syslogd also provide klogd support?
+#define BB_FEATURE_KLOGD
+//
+// enable syslogd -R remotehost
+#define BB_FEATURE_REMOTE_LOG
+//
+//Simple tail implementation (2.34k vs 3k for the full one).
+//Both provide 'tail -f' support (only one file at a time.)
+#define BB_FEATURE_SIMPLE_TAIL
+//
+// Enable support for loop devices in mount
+//#define BB_FEATURE_MOUNT_LOOP
+//
+// Enable support for a real /etc/mtab file instead of /proc/mounts
+//#define BB_FEATURE_MOUNT_MTAB_SUPPORT
+//
+// Enable support for mounting remote NFS volumes
+//#define BB_FEATURE_NFSMOUNT
+//
+// Enable support forced filesystem unmounting
+// (i.e. in case of an unreachable NFS system).
+#define BB_FEATURE_MOUNT_FORCE
+//
+// Enable support for creation of tar files.
+#define BB_FEATURE_TAR_CREATE
+//
+// Enable support for "--exclude" for excluding files
+#define BB_FEATURE_TAR_EXCLUDE
+//
+// Enable support for s///p pattern matching
+#define BB_FEATURE_SED_PATTERN_SPACE
+//
+//// Enable reverse sort
+#define BB_FEATURE_SORT_REVERSE
+//
+// Enable command line editing in the shell
+#define BB_FEATURE_SH_COMMAND_EDITING
+//
+//Allow the shell to invoke all the compiled in BusyBox commands as if they
+//were shell builtins. Nice for staticly linking an emergency rescue shell
+//among other thing.
+#define BB_FEATURE_SH_STANDALONE_SHELL
+//
+// Enable tab completion in the shell (not yet
+// working very well -- so don't turn this on)
+//#define BB_FEATURE_SH_TAB_COMPLETION
+//
+//Turn on extra fbset options
+//#define BB_FEATURE_FBSET_FANCY
+//
+//Turn on fbset readmode support
+//#define BB_FEATURE_FBSET_READMODE
+//
+// You must enable one or both of these features
+// Support installing modules from pre 2.1 kernels
+//#define BB_FEATURE_INSMOD_OLD_KERNEL
+// Support installing modules from kernel versions after 2.1.18
+#define BB_FEATURE_INSMOD_NEW_KERNEL
+//
+// Support module version checking
+//#define BB_FEATURE_INSMOD_VERSION_CHECKING
+//
+// Support for Minix filesystem, version 2
+//#define BB_FEATURE_MINIX2
+//
+//
+// Enable busybox --install [-s]
+// to create links (or symlinks) for all the commands that are
+// compiled into the binary. (needs /proc filesystem)
+// #define BB_FEATURE_INSTALLER
+//
+// Clean up all memory before exiting -- usually not needed
+// as the OS can clean up... Don't enable this unless you
+// have a really good reason for cleaning things up manually.
+//#define BB_FEATURE_CLEAN_UP
+//
+// End of Features List
+//
+//
+//
+//
+//
+//
+//---------------------------------------------------
+// Nothing beyond this point should ever be touched by
+// mere mortals so leave this stuff alone.
+//
+#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
+#define BB_MTAB
+#endif
+//
+#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
+#define BB_CMDEDIT
+#endif
+//
+#ifdef BB_KILLALL
+#ifndef BB_KILL
+#define BB_KILL
+#endif
+#endif
+//
+#ifdef BB_FEATURE_LINUXRC
+#ifndef BB_INIT
+#define BB_INIT
+#endif
+#define BB_LINUXRC
+#endif
+//
+#ifdef BB_GZIP
+#ifndef BB_GUNZIP
+#define BB_GUNZIP
+#endif
+#endif
+//
+#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
+#define BB_NFSMOUNT
+#endif
+//
+#if defined BB_FEATURE_SH_COMMAND_EDITING
+#ifndef BB_FEATURE_USE_TERMIOS
+#define BB_FEATURE_USE_TERMIOS
+#endif
+#endif
+//
+#if defined BB_FEATURE_AUTOWIDTH
+#ifndef BB_FEATURE_USE_TERMIOS
+#define BB_FEATURE_USE_TERMIOS
+#endif
+#endif
+//
+#if defined BB_INSMOD
+#ifndef BB_FEATURE_INSMOD_OLD_KERNEL
+#define BB_FEATURE_INSMOD_NEW_KERNEL
+#endif
+#endif
#
PROG := busybox
-VERSION := 0.47pre
+VERSION := 0.47
BUILDTIME := $(shell TZ=UTC date --utc "+%Y.%m.%d-%H:%M%z")
export VERSION
$(CC) $(LDFLAGS) -o $@ $^ $(LIBRARIES)
$(STRIP)
-busybox.links: busybox.def.h
+busybox.links: Config.h
- ./busybox.mkll | sort >$@
nfsmount.o cmdedit.o: %.o: %.h
-$(OBJECTS): %.o: busybox.def.h internal.h %.c Makefile
+$(OBJECTS): %.o: Config.h internal.h %.c Makefile
utility.o: loop.h
As of version 0.20 there is a version number. : ) Also as of version 0.20,
BusyBox is now modularized to easily allow you to build only the components you
need, thereby reducing binary size. To turn off unwanted Busybox components,
-simply edit the file busybox.def.h and comment out the components you do not
+simply edit the file "Config.h" and comment out the components you do not
need using C++ style (//) comments.
After the build is complete a busybox.links file is generated which is then
* Networking apps are probably going to be split out some time soon into a
separate package (named perhaps netkit-tiny?). This would remove the
- following items from BusyBox: hostid, hostname, nc, nslookup, telnet,
- and ping. nfs mounting and syslogd (when it supports network logging)
- will remain in BusyBox.
+ following items from BusyBox: hostid, hostname, nc, nslookup, telnet, and
+ ping. nfs mounting and syslogd (network logging) will remain in BusyBox.
-Erik
-----------------------
-
- I think that the add_inode &c in utility.c needs to also stow the
- st_dev field, and that du.c should NOT call `reset_inode_list'
- because there can be hard links from inside one argv/ to inside
- another argv/. du.c probably ought to have an -x switch like GNU du
- does also...
-
+ du.c probably ought to have an -x switch like GNU du does...
------------------------------------------------------------------
-
-An interesting email listing some apps that use /proc. BusyBox
-tries to avoid /proc as mush as is possible, so this stuff is
-interesting (to me at least):
-
-
-Date: Fri, 25 Feb 2000 08:23:12 +0000 (GMT)
-From: Riley Williams <rhw@MemAlpha.CX>
-X-Sender: rhw@moo.cus.org.uk
-To: almesber@lrc.di.epfl.ch
-Cc: "Albert D. Cahalan" <acahalan@cs.uml.edu>,
- Linux Kernel <linux-kernel@vger.rutgers.edu>
-Subject: Re: What /proc should contain [was: /proc/driver/microcode]
-In-Reply-To: <20000224165245.A29790@lrc.di.epfl.ch>
-Message-ID: <Pine.LNX.4.21.0002250806220.8741-100000@moo.cus.org.uk>
-Sender: owner-linux-kernel@vger.rutgers.edu
-Precedence: bulk
-
-Hi there.
-
- >> Nope, most /proc access is does via programs written in C.
-
- > That varies a lot from file to file. E.g. I haven't seen any
- > programs that are specificly designed to read /proc/atm/* yet,
- > and I know of only one (fuser) that reads /proc/mounts,
- > extracting only partial information (just to pick two examples
- > that I'm quite familiar with).
-
-As a point of reference, here's a slightly tweaked analysis of the
-programs on the system I'm reading your mail on. Basically, I ran the
-following script...
-
- Q> #!/bin/bash
- Q> function use() {
- Q> for Z in $* ; do
- Q> strings $Z | grep /proc | sed "s=^=$Z ="
- Q> done
- Q> }
- Q> use /{,s}bin/* /usr/{,s}bin/* | sort -u | tee proc-usage
-
-...and then went through it removing comments and print format
-strings. Replace /proc with /dev and you'd soon have an equivalent
-list for that - although I can report that such is MUCH larger...
-
-There are three programs therein that refer to /proc/mounts ...
-
- /bin/mount
- /bin/umount
- /usr/bin/eject
-
-...and, as you stated, none that refer to /proc/atm on this system.
-However, as this is a RedHat Linux 5.0 based system, that's not
-necessarily an up to date reference thereto...
-
-Here's the list anyway...
-
-/bin/kill /proc/%d/cmdline
-/bin/kill /proc/%d/stat
-
-/bin/mount /proc/devices
-/bin/mount /proc/filesystems
-/bin/mount /proc/mounts
-
-/bin/netstat /proc/net
-/bin/netstat /proc/net/appletalk
-/bin/netstat /proc/net/ax25
-/bin/netstat /proc/net/ax25_route
-/bin/netstat /proc/net/dev
-/bin/netstat /proc/net/ip_masquerade
-/bin/netstat /proc/net/ipx
-/bin/netstat /proc/net/ipx_route
-/bin/netstat /proc/net/netstat
-/bin/netstat /proc/net/nr
-/bin/netstat /proc/net/nr_neigh
-/bin/netstat /proc/net/nr_nodes
-/bin/netstat /proc/net/raw
-/bin/netstat /proc/net/route
-/bin/netstat /proc/net/rt_cache
-/bin/netstat /proc/net/snmp
-/bin/netstat /proc/net/tcp
-/bin/netstat /proc/net/udp
-/bin/netstat /proc/net/unix
-
-/bin/umount /proc/devices
-/bin/umount /proc/mounts
-
-/sbin/arp /proc/net/appletalk
-/sbin/arp /proc/net/arp
-/sbin/arp /proc/net/ax25
-/sbin/arp /proc/net/ipx
-/sbin/arp /proc/net/nr
-/sbin/arp /proc/net/unix
-
-/sbin/cardctl /proc/devices
-
-/sbin/cardmgr /proc/devices
-
-/sbin/fdisk /proc/ide/%s/media
-/sbin/fdisk /proc/scsi/scsi
-
-/sbin/getty /proc/version
-
-/sbin/ifconfig /proc/net
-/sbin/ifconfig /proc/net/appletalk
-/sbin/ifconfig /proc/net/ax25
-/sbin/ifconfig /proc/net/dev
-/sbin/ifconfig /proc/net/ipx
-/sbin/ifconfig /proc/net/nr
-/sbin/ifconfig /proc/net/unix
-
-/sbin/ifup /proc/sys/kernel/modprobe
-
-/sbin/ipchains /proc/net/ip_fwchains
-/sbin/ipchains /proc/net/ip_fwnames
-/sbin/ipchains /proc/net/ip_masquerade
-/sbin/ipchains /proc/sys/net/ipv4/ip_forward
-
-/sbin/ipmaddr /proc/net/dev_mcast
-/sbin/ipmaddr /proc/net/igmp
-/sbin/ipmaddr /proc/net/igmp6
-
-/sbin/iptunnel /proc/net/dev
-
-/sbin/killall5 /proc/%s/cmdline
-/sbin/killall5 /proc/%s/exe
-/sbin/killall5 /proc/%s/stat
-/sbin/killall5 /proc/version
-
-/sbin/klogd /proc/kmsg
-
-/sbin/lsmod /proc/modules
-
-/sbin/modprobe /proc/modules
-
-/sbin/pidof /proc/%s/cmdline
-/sbin/pidof /proc/%s/exe
-/sbin/pidof /proc/%s/stat
-/sbin/pidof /proc/version
-
-/sbin/probe /proc/pci
-
-/sbin/rarp /proc/net/ax25
-/sbin/rarp /proc/net/nr
-/sbin/rarp /proc/net/rarp
-
-/sbin/rmmod /proc/modules
-
-/sbin/rmmod.static /proc/modules
-
-/sbin/route /proc/net/appletalk
-/sbin/route /proc/net/ax25
-/sbin/route /proc/net/ax25_route
-/sbin/route /proc/net/ipx
-/sbin/route /proc/net/ipx_route
-/sbin/route /proc/net/nr
-/sbin/route /proc/net/nr_neigh
-/sbin/route /proc/net/nr_nodes
-/sbin/route /proc/net/route
-/sbin/route /proc/net/rt_cache
-/sbin/route /proc/net/unix
-
-/sbin/scsi_info /proc/scsi
-/sbin/scsi_info /proc/scsi/%s
-/sbin/scsi_info /proc/scsi/scsi
-
-/sbin/slattach /proc/net/ax25
-/sbin/slattach /proc/net/nr
-
-/sbin/swapoff /proc/swaps
-
-/sbin/swapon /proc/swaps
-
-/sbin/uugetty /proc/version
-
-/usr/bin/dig /proc/
-/usr/bin/dig /proc/interrupts
-/usr/bin/dig /proc/meminfo
-/usr/bin/dig /proc/rtc
-/usr/bin/dig /proc/self/status
-/usr/bin/dig /proc/stat
-
-/usr/bin/dnsquery /proc/
-/usr/bin/dnsquery /proc/interrupts
-/usr/bin/dnsquery /proc/meminfo
-/usr/bin/dnsquery /proc/rtc
-/usr/bin/dnsquery /proc/self/status
-/usr/bin/dnsquery /proc/stat
-
-/usr/bin/eject /proc/mounts
-
-/usr/bin/emacs /proc/loadavg
-
-/usr/bin/fetchmail /proc/net/dev
-
-/usr/bin/free /proc/meminfo
-
-/usr/bin/gmake /proc/loadavg
-
-/usr/bin/gpm-root /proc/loadavg
-/usr/bin/gpm-root /proc/meminfo
-
-/usr/bin/host /proc/
-/usr/bin/host /proc/interrupts
-/usr/bin/host /proc/meminfo
-/usr/bin/host /proc/rtc
-/usr/bin/host /proc/self/status
-/usr/bin/host /proc/stat
-
-/usr/bin/hoststat /proc/loadavg
-
-/usr/bin/hwdiag /proc/cpuinfo
-/usr/bin/hwdiag /proc/pci
-/usr/bin/hwdiag /proc/scsi/scsi
-/usr/bin/hwdiag /proc/version
-
-/usr/bin/lsdev /proc/dma
-/usr/bin/lsdev /proc/interrupts
-/usr/bin/lsdev /proc/ioports
-
-/usr/bin/mailq /proc/loadavg
-
-/usr/bin/make /proc/loadavg
-
-/usr/bin/mcookie /proc/loadavg
-/usr/bin/mcookie /proc/stat
-
-/usr/bin/newaliases /proc/loadavg
-
-/usr/bin/nslookup /proc/
-/usr/bin/nslookup /proc/interrupts
-/usr/bin/nslookup /proc/meminfo
-/usr/bin/nslookup /proc/rtc
-/usr/bin/nslookup /proc/self/status
-/usr/bin/nslookup /proc/stat
-
-/usr/bin/nsupdate /proc/
-/usr/bin/nsupdate /proc/interrupts
-/usr/bin/nsupdate /proc/meminfo
-/usr/bin/nsupdate /proc/rtc
-/usr/bin/nsupdate /proc/self/status
-/usr/bin/nsupdate /proc/stat
-
-/usr/bin/pgp /proc/version
-/usr/bin/pgpe /proc/version
-/usr/bin/pgpk /proc/version
-/usr/bin/pgps /proc/version
-/usr/bin/pgpv /proc/version
-
-/usr/bin/procinfo /proc/cmdline
-/usr/bin/procinfo /proc/devices
-/usr/bin/procinfo /proc/dma
-/usr/bin/procinfo /proc/filesystems
-/usr/bin/procinfo /proc/interrupts
-/usr/bin/procinfo /proc/loadavg
-/usr/bin/procinfo /proc/meminfo
-/usr/bin/procinfo /proc/modules
-/usr/bin/procinfo /proc/stat
-/usr/bin/procinfo /proc/uptime
-/usr/bin/procinfo /proc/version
-
-/usr/bin/purgestat /proc/loadavg
-
-/usr/bin/screen /proc/loadavg
-
-/usr/bin/strace /proc/%d/stat
-
-/usr/bin/top /proc/cpuinfo
-/usr/bin/top /proc/meminfo
-/usr/bin/top /proc/stat
-
-/usr/bin/vmstat /proc/%s/stat
-/usr/bin/vmstat /proc/meminfo
-/usr/bin/vmstat /proc/stat
-
-/usr/sbin/atd /proc/loadavg
-
-/usr/sbin/dnskeygen /proc/
-/usr/sbin/dnskeygen /proc/interrupts
-/usr/sbin/dnskeygen /proc/meminfo
-/usr/sbin/dnskeygen /proc/rtc
-/usr/sbin/dnskeygen /proc/self/status
-/usr/sbin/dnskeygen /proc/stat
-
-/usr/sbin/fuser /proc/%d/stat
-/usr/sbin/fuser /proc/net/%s
-/usr/sbin/fuser /proc/net/unix
-
-/usr/sbin/in.identd /proc/net/tcp
-
-/usr/sbin/irpd /proc/
-/usr/sbin/irpd /proc/interrupts
-/usr/sbin/irpd /proc/meminfo
-/usr/sbin/irpd /proc/rtc
-/usr/sbin/irpd /proc/self/status
-/usr/sbin/irpd /proc/stat
-
-/usr/sbin/named /proc/
-/usr/sbin/named /proc/interrupts
-/usr/sbin/named /proc/meminfo
-/usr/sbin/named /proc/rtc
-/usr/sbin/named /proc/self/status
-/usr/sbin/named /proc/stat
-
-/usr/sbin/named-xfer /proc/
-/usr/sbin/named-xfer /proc/interrupts
-/usr/sbin/named-xfer /proc/meminfo
-/usr/sbin/named-xfer /proc/rtc
-/usr/sbin/named-xfer /proc/self/status
-/usr/sbin/named-xfer /proc/stat
-
-/usr/sbin/readprofile /proc/profile
-
-/usr/sbin/rwhod /proc/loadavg
-/usr/sbin/rwhod /proc/uptime
-
-/usr/sbin/sendmail /proc/loadavg
-
-/usr/sbin/setconsole /proc/openprom/options
-/usr/sbin/setconsole /proc/openprom/options/${console}-mode
-/usr/sbin/setconsole /proc/openprom/options/input-device
-/usr/sbin/setconsole /proc/openprom/options/output-device
-
-Best wishes from Riley.
-
- * Copyright (C) 1999, Memory Alpha Systems.
- * All rights and wrongs reserved.
-
-+----------------------------------------------------------------------+
-| There is something frustrating about the quality and speed of Linux |
-| development, ie., the quality is too high and the speed is too high, |
-| in other words, I can implement this XXXX feature, but I bet someone |
-| else has already done so and is just about to release their patch. |
-+----------------------------------------------------------------------+
- * http://www.memalpha.cx/Linux/Kernel/
-
-
--
-To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
-the body of a message to majordomo@vger.rutgers.edu
-Please read the FAQ at http://www.tux.org/lkml/
-
#!/bin/sh
# Make busybox links list file.
-DF="busybox.def.h"
+DF="Config.h"
MF="busybox.c"
LIST="$(gcc -E -dM $DF | sed -n -e '/^.*BB_FEATURE.*$/d;s/^#define.*\<BB_\(.*\)\>/BB_\1/gp;' | sort)"
# I added in the extra "ls" so only source files that
# actually exist will show up in the compile list.
ls -1 ` \
- gcc -E -dM busybox.def.h | \
+ gcc -E -dM Config.h | \
sed -n -e '/^.*BB_FEATURE.*$/d;s/^#define.*\<BB_\(.*\)\>/\1.c/gp;' \
| tr '[:upper:]' '[:lower:]' | sort
` 2>/dev/null | sed -e 's/\.c$/\.o/g'
+++ /dev/null
-/* vi: set sw=4 ts=4: */
-// This file defines the feature set to be compiled into busybox.
-// When you turn things off here, they won't be compiled in at all.
-//
-//// This file is parsed by sed. You MUST use single line comments.
-// i.e. //#define BB_BLAH
-//
-//
-// BusyBox Applications
-#define BB_AR
-#define BB_BASENAME
-#define BB_CAT
-#define BB_CHMOD_CHOWN_CHGRP
-#define BB_CHROOT
-#define BB_CHVT
-#define BB_CLEAR
-#define BB_CP_MV
-#define BB_CUT
-#define BB_DATE
-#define BB_DC
-#define BB_DD
-#define BB_DEALLOCVT
-#define BB_DF
-#define BB_DIRNAME
-#define BB_DMESG
-#define BB_DOS2UNIX
-#define BB_DUTMP
-#define BB_DU
-#define BB_DUMPKMAP
-#define BB_ECHO
-#define BB_EXPR
-#define BB_FBSET
-#define BB_FDFLUSH
-#define BB_FIND
-#define BB_FREE
-#define BB_FREERAMDISK
-#define BB_FSCK_MINIX
-#define BB_GETOPT
-#define BB_GREP
-#define BB_GUNZIP
-#define BB_GZIP
-#define BB_HALT
-#define BB_HEAD
-#define BB_HOSTID
-#define BB_HOSTNAME
-#define BB_ID
-#define BB_INIT
-#define BB_INSMOD
-#define BB_KILL
-#define BB_KILLALL
-#define BB_LENGTH
-#define BB_LN
-#define BB_LOADACM
-#define BB_LOADFONT
-#define BB_LOADKMAP
-#define BB_LOGGER
-#define BB_LOGNAME
-#define BB_LS
-#define BB_LSMOD
-#define BB_MAKEDEVS
-#define BB_MD5SUM
-#define BB_MKDIR
-#define BB_MKFIFO
-#define BB_MKFS_MINIX
-#define BB_MKNOD
-#define BB_MKSWAP
-#define BB_MKTEMP
-#define BB_NC
-#define BB_MORE
-#define BB_MOUNT
-#define BB_MT
-#define BB_NSLOOKUP
-#define BB_PING
-#define BB_POWEROFF
-#define BB_PRINTF
-#define BB_PS
-#define BB_PWD
-#define BB_RDATE
-#define BB_REBOOT
-#define BB_RENICE
-#define BB_RESET
-#define BB_RM
-#define BB_RMDIR
-#define BB_RMMOD
-#define BB_SED
-#define BB_SETKEYCODES
-#define BB_SH
-#define BB_SLEEP
-#define BB_SORT
-#define BB_SWAPONOFF
-#define BB_SYNC
-#define BB_SYSLOGD
-#define BB_TAIL
-#define BB_TAR
-#define BB_TEE
-#define BB_TEST
-#define BB_TELNET
-#define BB_TOUCH
-#define BB_TR
-#define BB_TRUE_FALSE
-#define BB_TTY
-#define BB_UNRPM
-#define BB_UPTIME
-#define BB_USLEEP
-#define BB_WC
-#define BB_WGET
-#define BB_WHICH
-#define BB_WHOAMI
-#define BB_UUENCODE
-#define BB_UUDECODE
-#define BB_UMOUNT
-#define BB_UNIQ
-#define BB_UNAME
-#define BB_UNIX2DOS
-#define BB_UPDATE
-#define BB_XARGS
-#define BB_YES
-// End of Applications List
-//
-//
-//
-// ---------------------------------------------------------
-// This is where feature definitions go. Generally speaking,
-// turning this stuff off makes things a bit smaller (and less
-// pretty/useful).
-//
-//
-//
-// Turn this on to use Erik's very cool devps, devmtab, etc kernel drivers,
-// thereby eliminating the need for the /proc filesystem and thereby saving
-// lots and lots memory for more important things. You can not use this and
-// USE_PROCFS at the same time... NOTE: If you enable this feature, you
-// _must_ have patched the kernel to include the devps patch that is included
-// in the busybox/kernel-patches directory. You will also need to create some
-// device special files in /dev on your embedded system:
-// mknod /dev/modules c 10 23
-// mknod /dev/mtab c 10 22
-// mknod /dev/ps c 10 21
-// I emailed Linus and this patch will not be going into the stock kernel.
-//#define BB_FEATURE_USE_DEVPS_PATCH
-//
-// enable features that use the /proc filesystem (apps that
-// break without this will tell you on compile)...
-// You can't use this and BB_FEATURE_USE_DEVPS_PATCH
-// at the same time...
-#define BB_FEATURE_USE_PROCFS
-//
-// This compiles out everything but the most
-// trivial --help usage information (i.e. reduces binary size)
-//#define BB_FEATURE_TRIVIAL_HELP
-//
-// Use termios to manipulate the screen ('more' is prettier with this on)
-#define BB_FEATURE_USE_TERMIOS
-//
-// calculate terminal & column widths (for more and ls)
-#define BB_FEATURE_AUTOWIDTH
-//
-// show username/groupnames (bypasses libc6 NSS) for ls
-#define BB_FEATURE_LS_USERNAME
-//
-// show file timestamps in ls
-#define BB_FEATURE_LS_TIMESTAMPS
-//
-// enable ls -p and -F
-#define BB_FEATURE_LS_FILETYPES
-//
-// sort the file names (still a bit buggy)
-#define BB_FEATURE_LS_SORTFILES
-//
-// enable ls -R
-#define BB_FEATURE_LS_RECURSIVE
-//
-// enable ls -L
-#define BB_FEATURE_LS_FOLLOWLINKS
-//
-// Change ping implementation -- simplified, featureless, but really small.
-//#define BB_FEATURE_SIMPLE_PING
-//
-// Make init use a simplified /etc/inittab file (recommended).
-#define BB_FEATURE_USE_INITTAB
-//
-//Enable init being called as /linuxrc
-#define BB_FEATURE_LINUXRC
-//
-//Have init enable core dumping for child processes (for debugging only)
-//#define BB_FEATURE_INIT_COREDUMPS
-//
-// Allow init to permenently chroot, and umount the old root fs
-// just like an initrd does. Requires a kernel patch by Werner Almesberger.
-// ftp://icaftp.epfl.ch/pub/people/almesber/misc/umount-root-*.tar.gz
-//#define BB_FEATURE_INIT_CHROOT
-//
-//Make sure nothing is printed to the console on boot
-#define BB_FEATURE_EXTRA_QUIET
-//
-//Should syslogd also provide klogd support?
-#define BB_FEATURE_KLOGD
-//
-// enable syslogd -R remotehost
-#define BB_FEATURE_REMOTE_LOG
-//
-//Simple tail implementation (2.34k vs 3k for the full one).
-//Both provide 'tail -f' support (only one file at a time.)
-#define BB_FEATURE_SIMPLE_TAIL
-//
-// Enable support for loop devices in mount
-#define BB_FEATURE_MOUNT_LOOP
-//
-// Enable support for a real /etc/mtab file instead of /proc/mounts
-//#define BB_FEATURE_MOUNT_MTAB_SUPPORT
-//
-// Enable support for mounting remote NFS volumes
-#define BB_FEATURE_NFSMOUNT
-//
-// Enable support forced filesystem unmounting
-// (i.e. in case of an unreachable NFS system).
-#define BB_FEATURE_MOUNT_FORCE
-//
-// Enable support for creation of tar files.
-#define BB_FEATURE_TAR_CREATE
-//
-// Enable support for "--exclude" for excluding files
-#define BB_FEATURE_TAR_EXCLUDE
-//
-// Enable support for s///p pattern matching
-#define BB_FEATURE_SED_PATTERN_SPACE
-//
-//// Enable reverse sort
-#define BB_FEATURE_SORT_REVERSE
-//
-// Enable command line editing in the shell
-#define BB_FEATURE_SH_COMMAND_EDITING
-//
-//Allow the shell to invoke all the compiled in BusyBox commands as if they
-//were shell builtins. Nice for staticly linking an emergency rescue shell
-//among other thing.
-#define BB_FEATURE_SH_STANDALONE_SHELL
-//
-// Enable tab completion in the shell (not yet
-// working very well -- so don't turn this on)
-//#define BB_FEATURE_SH_TAB_COMPLETION
-//
-//Turn on extra fbset options
-//#define BB_FEATURE_FBSET_FANCY
-//
-//Turn on fbset readmode support
-//#define BB_FEATURE_FBSET_READMODE
-//
-// You must enable one or both of these features
-// Support installing modules from pre 2.1 kernels
-//#define BB_FEATURE_INSMOD_OLD_KERNEL
-// Support installing modules from kernel versions after 2.1.18
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-//
-// Support module version checking
-//#define BB_FEATURE_INSMOD_VERSION_CHECKING
-//
-// Support for Minix filesystem, version 2
-//#define BB_FEATURE_MINIX2
-//
-//
-// Enable busybox --install [-s]
-// to create links (or symlinks) for all the commands that are
-// compiled into the binary. (needs /proc filesystem)
-// #define BB_FEATURE_INSTALLER
-//
-// Clean up all memory before exiting -- usually not needed
-// as the OS can clean up... Don't enable this unless you
-// have a really good reason for cleaning things up manually.
-//#define BB_FEATURE_CLEAN_UP
-//
-// End of Features List
-//
-//
-//
-//
-//
-//
-//---------------------------------------------------
-// Nothing beyond this point should ever be touched by
-// mere mortals so leave this stuff alone.
-//
-#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
-#define BB_MTAB
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
-#define BB_CMDEDIT
-#endif
-//
-#ifdef BB_KILLALL
-#ifndef BB_KILL
-#define BB_KILL
-#endif
-#endif
-//
-#ifdef BB_FEATURE_LINUXRC
-#ifndef BB_INIT
-#define BB_INIT
-#endif
-#define BB_LINUXRC
-#endif
-//
-#ifdef BB_GZIP
-#ifndef BB_GUNZIP
-#define BB_GUNZIP
-#endif
-#endif
-//
-#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
-#define BB_NFSMOUNT
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_FEATURE_AUTOWIDTH
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_INSMOD
-#ifndef BB_FEATURE_INSMOD_OLD_KERNEL
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-#endif
-#endif
+++ /dev/null
-/* vi: set sw=4 ts=4: */
-
-// NOTE: This file only defines features usefull under the Hurd,
-// To compile for the Hurd raname this to busybox.def.h prior to make
-
-// This file defines the feature set to be compiled into busybox.
-// When you turn things off here, they won't be compiled in at all.
-//
-//// This file is parsed by sed. You MUST use single line comments.
-// i.e. //#define BB_BLAH
-//
-//
-// BusyBox Applications
-#define BB_AR
-#define BB_BASENAME
-#define BB_CAT
-#define BB_CHMOD_CHOWN_CHGRP
-#define BB_CHROOT
-//#define BB_CHVT /* not needed */
-#define BB_CLEAR
-#define BB_CP_MV
-#define BB_CUT
-#define BB_DATE
-#define BB_DC
-#define BB_DD
-//#define BB_DEALLOCVT /* inot needed */
-//#define BB_DF /* different implementation */
-#define BB_DIRNAME
-//#define BB_DMESG /* doesnt compile, different implementation */
-#define BB_DUTMP
-#define BB_DU
-//#define BB_DUMPKMAP /* not needed */
-#define BB_ECHO
-#define BB_EXPR
-//#define BB_FBSET /* not needed, doesnt compile */
-//#define BB_FDFLUSH /* is this needed? */
-#define BB_FIND
-//#define BB_FREE /* doesnt compile */
-#define BB_FREERAMDISK /* does hurd support ramdisks ? */
-#define BB_FSCK_MINIX
-#define BB_GETOPT
-#define BB_GREP
-#define BB_GUNZIP
-#define BB_GZIP
-#define BB_HALT
-#define BB_HEAD
-#define BB_HOSTID
-#define BB_HOSTNAME
-#define BB_ID
-//#define BB_INIT /* not needed?, doesnt compile */
-//#define BB_INSMOD /* not needed, doesnt compile */
-#define BB_KILL
-#define BB_KILLALL
-#define BB_LENGTH
-#define BB_LN
-//#define BB_LOADACM /* not needed, doesnt compile */
-//#define BB_LOADFONT /* not needed, doesnt compile */
-//#define BB_LOADKMAP /* not needed */
-#define BB_LOGGER
-#define BB_LOGNAME
-#define BB_LS
-//#define BB_LSMOD /* not needed, doesnt compile */
-//#define BB_MAKEDEVS /* different implementation */
-#define BB_MD5SUM
-#define BB_MKDIR
-#define BB_MKFIFO
-#define BB_MKFS_MINIX
-#define BB_MKNOD
-//#define BB_MKSWAP /* different impelementation (i think) */
-#define BB_MKTEMP
-#define BB_NC
-#define BB_MORE
-//#define BB_MOUNT /* different implementation */
-#define BB_MT
-#define BB_NSLOOKUP
-//#define BB_PING /* doesnt compile, Hurd uses BSD style ip.h */
-//#define BB_POWEROFF /* different implementation i assume */
-#define BB_PRINTF
-//#define BB_PS /* needs /proc */
-#define BB_PWD
-#define BB_RDATE
-//#define BB_REBOOT /* different implementation */
-#define BB_RENICE
-#define BB_RESET
-#define BB_RM
-#define BB_RMDIR
-//#define BB_RMMOD /* not needed, doesnt compile */
-#define BB_SED
-//#define BB_SETKEYCODES /* is this needed ? */
-#define BB_SH
-#define BB_SLEEP
-#define BB_SORT
-//#define BB_SWAPONOFF /* different implementation, doesnt compile */
-#define BB_SYNC
-//#define BB_SYSLOGD /* doesnt compile */
-#define BB_TAIL
-#define BB_TAR
-#define BB_TEE
-#define BB_TEST
-#define BB_TELNET
-#define BB_TOUCH
-#define BB_TR
-#define BB_TRUE_FALSE
-#define BB_TTY
-//#define BB_UPTIME /* doesnt compile */
-#define BB_USLEEP
-#define BB_WC
-#define BB_WGET
-#define BB_WHICH
-#define BB_WHOAMI
-#define BB_UUENCODE
-#define BB_UUDECODE
-//#define BB_UMOUNT /* different implementation */
-#define BB_UNIQ
-//#define BB_UNAME /* doesnt compile */
-//#define BB_UPDATE /* doesnt compile */
-#define BB_YES
-// End of Applications List
-//
-//
-//
-// ---------------------------------------------------------
-// This is where feature definitions go. Generally speaking,
-// turning this stuff off makes things a bit smaller (and less
-// pretty/useful).
-//
-//
-//
-// Turn this on to use Erik's very cool devps, devmtab, etc kernel drivers,
-// thereby eliminating the need for the /proc filesystem and thereby saving
-// lots and lots memory for more important things. You can not use this and
-// USE_PROCFS at the same time... NOTE: If you enable this feature, you
-// _must_ have patched the kernel to include the devps patch that is included
-// in the busybox/kernel-patches directory. You will also need to create some
-// device special files in /dev on your embedded system:
-// mknod /dev/modules c 10 23
-// mknod /dev/mtab c 10 22
-// mknod /dev/ps c 10 21
-// I emailed Linus and this patch will not be going into the stock kernel.
-//#define BB_FEATURE_USE_DEVPS_PATCH
-//
-// enable features that use the /proc filesystem (apps that
-// break without this will tell you on compile)...
-// You can't use this and BB_FEATURE_USE_DEVPS_PATCH
-// at the same time...
-#define BB_FEATURE_USE_PROCFS
-//
-// This compiles out everything but the most
-// trivial --help usage information (i.e. reduces binary size)
-//#define BB_FEATURE_TRIVIAL_HELP
-//
-// Use termios to manipulate the screen ('more' is prettier with this on)
-#define BB_FEATURE_USE_TERMIOS
-//
-// calculate terminal & column widths (for more and ls)
-#define BB_FEATURE_AUTOWIDTH
-//
-// show username/groupnames (bypasses libc6 NSS) for ls
-#define BB_FEATURE_LS_USERNAME
-//
-// show file timestamps in ls
-#define BB_FEATURE_LS_TIMESTAMPS
-//
-// enable ls -p and -F
-#define BB_FEATURE_LS_FILETYPES
-//
-// sort the file names (still a bit buggy)
-#define BB_FEATURE_LS_SORTFILES
-//
-// enable ls -R
-#define BB_FEATURE_LS_RECURSIVE
-//
-// Change ping implementation -- simplified, featureless, but really small.
-#define BB_FEATURE_SIMPLE_PING
-//
-// Make init use a simplified /etc/inittab file (recommended).
-#define BB_FEATURE_USE_INITTAB
-//
-//Enable init being called as /linuxrc
-//#define BB_FEATURE_LINUXRC
-//
-//Have init enable core dumping for child processes (for debugging only)
-//#define BB_FEATURE_INIT_COREDUMPS
-//
-// Allow init to permenently chroot, and umount the old root fs
-// just like an initrd does. Requires a kernel patch by Werner Almesberger.
-// ftp://icaftp.epfl.ch/pub/people/almesber/misc/umount-root-*.tar.gz
-//#define BB_FEATURE_INIT_CHROOT
-//
-//Make sure nothing is printed to the console on boot
-#define BB_FEATURE_EXTRA_QUIET
-//
-//Should syslogd also provide klogd support?
-#define BB_FEATURE_KLOGD
-//
-// enable syslogd -R remotehost
-#define BB_FEATURE_REMOTE_LOG
-//
-//Simple tail implementation (2.34k vs 3k for the full one).
-//Both provide 'tail -f' support (only one file at a time.)
-#define BB_FEATURE_SIMPLE_TAIL
-//
-// Enable support for loop devices in mount
-//#define BB_FEATURE_MOUNT_LOOP
-//
-// Enable support for a real /etc/mtab file instead of /proc/mounts
-//#define BB_FEATURE_MOUNT_MTAB_SUPPORT
-//
-// Enable support for mounting remote NFS volumes
-//#define BB_FEATURE_NFSMOUNT
-//
-// Enable support forced filesystem unmounting
-// (i.e. in case of an unreachable NFS system).
-#define BB_FEATURE_MOUNT_FORCE
-//
-// Enable support for creation of tar files.
-#define BB_FEATURE_TAR_CREATE
-//
-// Enable support for "--exclude" for excluding files
-#define BB_FEATURE_TAR_EXCLUDE
-//
-// Enable support for s///p pattern matching
-#define BB_FEATURE_SED_PATTERN_SPACE
-//
-//// Enable reverse sort
-#define BB_FEATURE_SORT_REVERSE
-//
-// Enable command line editing in the shell
-#define BB_FEATURE_SH_COMMAND_EDITING
-//
-//Allow the shell to invoke all the compiled in BusyBox commands as if they
-//were shell builtins. Nice for staticly linking an emergency rescue shell
-//among other thing.
-#define BB_FEATURE_SH_STANDALONE_SHELL
-//
-// Enable tab completion in the shell (not yet
-// working very well -- so don't turn this on)
-//#define BB_FEATURE_SH_TAB_COMPLETION
-//
-//Turn on extra fbset options
-//#define BB_FEATURE_FBSET_FANCY
-//
-//Turn on fbset readmode support
-//#define BB_FEATURE_FBSET_READMODE
-//
-// You must enable one or both of these features
-// Support installing modules from pre 2.1 kernels
-//#define BB_FEATURE_INSMOD_OLD_KERNEL
-// Support installing modules from kernel versions after 2.1.18
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-//
-// Support module version checking
-//#define BB_FEATURE_INSMOD_VERSION_CHECKING
-//
-// Support for Minix filesystem, version 2
-//#define BB_FEATURE_MINIX2
-//
-//
-// Enable busybox --install [-s]
-// to create links (or symlinks) for all the commands that are
-// compiled into the binary. (needs /proc filesystem)
-// #define BB_FEATURE_INSTALLER
-//
-// Clean up all memory before exiting -- usually not needed
-// as the OS can clean up... Don't enable this unless you
-// have a really good reason for cleaning things up manually.
-//#define BB_FEATURE_CLEAN_UP
-//
-// End of Features List
-//
-//
-//
-//
-//
-//
-//---------------------------------------------------
-// Nothing beyond this point should ever be touched by
-// mere mortals so leave this stuff alone.
-//
-#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
-#define BB_MTAB
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
-#define BB_CMDEDIT
-#endif
-//
-#ifdef BB_KILLALL
-#ifndef BB_KILL
-#define BB_KILL
-#endif
-#endif
-//
-#ifdef BB_FEATURE_LINUXRC
-#ifndef BB_INIT
-#define BB_INIT
-#endif
-#define BB_LINUXRC
-#endif
-//
-#ifdef BB_GZIP
-#ifndef BB_GUNZIP
-#define BB_GUNZIP
-#endif
-#endif
-//
-#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
-#define BB_NFSMOUNT
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_FEATURE_AUTOWIDTH
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_INSMOD
-#ifndef BB_FEATURE_INSMOD_OLD_KERNEL
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-#endif
-#endif
#!/bin/sh
# Make busybox links list file.
-DF="busybox.def.h"
+DF="Config.h"
MF="busybox.c"
LIST="$(gcc -E -dM $DF | sed -n -e '/^.*BB_FEATURE.*$/d;s/^#define.*\<BB_\(.*\)\>/BB_\1/gp;' | sort)"
# I added in the extra "ls" so only source files that
# actually exist will show up in the compile list.
ls -1 ` \
- gcc -E -dM busybox.def.h | \
+ gcc -E -dM Config.h | \
sed -n -e '/^.*BB_FEATURE.*$/d;s/^#define.*\<BB_\(.*\)\>/\1.c/gp;' \
| tr '[:upper:]' '[:lower:]' | sort
` 2>/dev/null | sed -e 's/\.c$/\.o/g'
Name: busybox
-Version: 0.47pre
+Version: 0.47
Release: 1
Group: System/Utilities
Summary: BusyBox is a tiny suite of Unix utilities in a multi-call binary.
Name: busybox
-Version: 0.47pre
+Version: 0.47
Release: 1
Group: System/Utilities
Summary: BusyBox is a tiny suite of Unix utilities in a multi-call binary.
#ifndef _BB_INTERNAL_H_
#define _BB_INTERNAL_H_ 1
-#include "busybox.def.h"
+#include "Config.h"
#ifdef DMALLOC
#include "dmalloc.h"
projects / oweals / busybox.git / commitdiff