net: dc2114x: Clean up init code
authorMarek Vasut <marek.vasut+renesas@gmail.com>
Sun, 19 Apr 2020 01:09:47 +0000 (03:09 +0200)
committermarex <marex@desktop.lan>
Fri, 1 May 2020 10:35:21 +0000 (12:35 +0200)
Clean up the driver init code to bring it up to standards with
U-Boot coding style, no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
drivers/net/dc2114x.c

index 40bfc5281b27e91df8f9215bc45c5ca1daf1833e..d302d0362a93c4152e7530cf23168b6d605f5868 100644 (file)
@@ -167,33 +167,30 @@ static struct pci_device_id supported[] = {
 
 int dc21x4x_initialize(bd_t *bis)
 {
-       int                     idx=0;
-       int                     card_number = 0;
-       unsigned int            cfrv;
-       unsigned char           timer;
-       pci_dev_t               devbusfn;
-       unsigned int            iobase;
-       unsigned short          status;
-       struct eth_device*      dev;
-
-       while(1) {
-               devbusfn =  pci_find_devices(supported, idx++);
-               if (devbusfn == -1) {
+       struct eth_device *dev;
+       unsigned short status;
+       unsigned char timer;
+       unsigned int iobase;
+       int card_number = 0;
+       pci_dev_t devbusfn;
+       unsigned int cfrv;
+       int idx = 0;
+
+       while (1) {
+               devbusfn = pci_find_devices(supported, idx++);
+               if (devbusfn == -1)
                        break;
-               }
 
                /* Get the chip configuration revision register. */
                pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv);
 
-               if ((cfrv & CFRV_RN) < DC2114x_BRK ) {
+               if ((cfrv & CFRV_RN) < DC2114x_BRK) {
                        printf("Error: The chip is not DC21143.\n");
                        continue;
                }
 
                pci_read_config_word(devbusfn, PCI_COMMAND, &status);
-               status |=
-                 PCI_COMMAND_MEMORY |
-                 PCI_COMMAND_MASTER;
+               status |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
                pci_write_config_word(devbusfn, PCI_COMMAND, status);
 
                pci_read_config_word(devbusfn, PCI_COMMAND, &status);
@@ -211,30 +208,31 @@ int dc21x4x_initialize(bd_t *bis)
                pci_read_config_byte(devbusfn, PCI_LATENCY_TIMER, &timer);
 
                if (timer < 0x60) {
-                       pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x60);
+                       pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER,
+                                             0x60);
                }
 
                /* read BAR for memory space access */
                pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase);
                iobase &= PCI_BASE_ADDRESS_MEM_MASK;
-               debug ("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
-
-               dev = (struct eth_device*) malloc(sizeof *dev);
+               debug("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
 
+               dev = (struct eth_device *)malloc(sizeof(*dev));
                if (!dev) {
                        printf("Can not allocalte memory of dc21x4x\n");
                        break;
                }
+
                memset(dev, 0, sizeof(*dev));
 
                sprintf(dev->name, "dc21x4x#%d", card_number);
 
                dev->iobase = pci_mem_to_phys(devbusfn, iobase);
-               dev->priv   = (void*) devbusfn;
-               dev->init   = dc21x4x_init;
-               dev->halt   = dc21x4x_halt;
-               dev->send   = dc21x4x_send;
-               dev->recv   = dc21x4x_recv;
+               dev->priv = (void *)devbusfn;
+               dev->init = dc21x4x_init;
+               dev->halt = dc21x4x_halt;
+               dev->send = dc21x4x_send;
+               dev->recv = dc21x4x_recv;
 
                /* Ensure we're not sleeping. */
                pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
@@ -251,10 +249,10 @@ int dc21x4x_initialize(bd_t *bis)
        return card_number;
 }
 
-static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
+static int dc21x4x_init(struct eth_device *dev, bd_t *bis)
 {
-       int             i;
-       int             devbusfn = (int) dev->priv;
+       int i;
+       int devbusfn = (int)dev->priv;
 
        /* Ensure we're not sleeping. */
        pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
@@ -271,12 +269,12 @@ static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
        for (i = 0; i < NUM_RX_DESC; i++) {
                rx_ring[i].status = cpu_to_le32(R_OWN);
                rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
-               rx_ring[i].buf = cpu_to_le32(
-                       phys_to_bus((u32)net_rx_packets[i]));
+               rx_ring[i].buf =
+                       cpu_to_le32(phys_to_bus((u32)net_rx_packets[i]));
                rx_ring[i].next = 0;
        }
 
-       for (i=0; i < NUM_TX_DESC; i++) {
+       for (i = 0; i < NUM_TX_DESC; i++) {
                tx_ring[i].status = 0;
                tx_ring[i].des1 = 0;
                tx_ring[i].buf = 0;
@@ -291,8 +289,8 @@ static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
        tx_ring[txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
 
        /* Tell the adapter where the TX/RX rings are located. */
-       OUTL(dev, phys_to_bus((u32) &rx_ring), DE4X5_RRBA);
-       OUTL(dev, phys_to_bus((u32) &tx_ring), DE4X5_TRBA);
+       OUTL(dev, phys_to_bus((u32)&rx_ring), DE4X5_RRBA);
+       OUTL(dev, phys_to_bus((u32)&tx_ring), DE4X5_TRBA);
 
        START_DE4X5(dev);