ARM: at91: fix and update README.at91 document

This patch implement following things
  - The link no longer accessable
  - Remove the error configuration command
  - Update soldered data flash memory map
  - Update at91sam9m10g45ek memory size to 128MiB

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

diff --git a/doc/README.at91 b/doc/README.at91
index b51df00da701e5469ee9c489f5c63bf7390d6037..b3d110b38d49676b1b45e61fc0ca1db8acfd8eb5 100644 (file)
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -1,7 +1,5 @@
 Atmel AT91 Evaluation kits
 
-http://atmel.com/dyn/products/tools.asp?family_id=605#1443
-
 I. Board mapping & boot media
 ------------------------------------------------------------------------------
 AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
@@ -10,7 +8,7 @@ AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
 Memory map
        0x20000000 - 23FFFFFF   SDRAM (64 MB)
        0xC0000000 - Cxxxxxxx   Atmel Dataflash card (J13)
-       0xD0000000 - Dxxxxxxx   Soldered Atmel Dataflash
+       0xD0000000 - D07FFFFF   Soldered Atmel Dataflash (AT45DB642)
 
 Environment variables
 
@@ -20,7 +18,6 @@ Environment variables
                - Nand flash.
 
        You can choose your storage location at config step (here for at91sam9260ek) :
-               make at91sam9260ek_config               - use data flash (spi cs1) (default)
                make at91sam9260ek_nandflash_config     - use nand flash
                make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
                make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
@@ -32,7 +29,7 @@ AT91SAM9261EK, AT91SAM9G10EK
 
 Memory map
        0x20000000 - 23FFFFFF   SDRAM (64 MB)
-       0xC0000000 - Cxxxxxxx   Soldered Atmel Dataflash
+       0xC0000000 - C07FFFFF   Soldered Atmel Dataflash (AT45DB642)
        0xD0000000 - Dxxxxxxx   Atmel Dataflash card (J22)
 
 Environment variables
@@ -43,7 +40,6 @@ Environment variables
                - Nand flash.
 
        You can choose your storage location at config step (here for at91sam9260ek) :
-               make at91sam9261ek_config               - use data flash (spi cs0) (default)
                make at91sam9261ek_nandflash_config     - use nand flash
                make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
                make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
@@ -65,7 +61,6 @@ Environment variables
                - Nor flash (not populate by default)
 
        You can choose your storage location at config step (here for at91sam9260ek) :
-               make at91sam9263ek_config               - use data flash (spi cs0) (default)
                make at91sam9263ek_nandflash_config     - use nand flash
                make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
                make at91sam9263ek_norflash_config      - use nor flash
@@ -79,19 +74,15 @@ AT91SAM9M10G45EK
 ------------------------------------------------------------------------------
 
 Memory map
-       0x20000000 - 23FFFFFF   SDRAM (64 MB)
-       0xC0000000 - Cxxxxxxx   Atmel Dataflash card (J12)
+       0x70000000 - 77FFFFFF   SDRAM (128 MB)
 
 Environment variables
 
        U-Boot environment variables can be stored at different places:
-               - Dataflash on SPI chip select 0 (dataflash card)
                - Nand flash.
 
        You can choose your storage location at config step (here for at91sam9m10g45ek) :
-               make at91sam9m10g45ek_config                    - use data flash (spi cs0) (default)
                make at91sam9m10g45ek_nandflash_config          - use nand flash
-               make at91sam9m10g45ek_dataflash_cs0_config      - use data flash (spi cs0)
 
 
 ------------------------------------------------------------------------------
@@ -100,7 +91,7 @@ AT91SAM9RLEK
 
 Memory map
        0x20000000 - 23FFFFFF   SDRAM (64 MB)
-       0xC0000000 - Cxxxxxxx   Soldered Atmel Dataflash
+       0xC0000000 - C07FFFFF   Soldered Atmel Dataflash (AT45DB642)
 
 Environment variables
 
@@ -108,10 +99,8 @@ Environment variables
                - Dataflash on SPI chip select 0
                - Nand flash.
 
-       You can choose your storage location at config step (here for at91sam9260ek) :
-               make at91sam9263ek_config               - use data flash (spi cs0) (default)
-               make at91sam9263ek_nandflash_config     - use nand flash
-               make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
+       You can choose your storage location at config step (here for at91sam9rlek) :
+               make at91sam9rlek_nandflash_config      - use nand flash
 
 II. Watchdog support