Fix buffer overrun errors in OPENSSL_conf().
*) applies to 0.9.6a/0.9.6b/0.9.6c and 0.9.7
+) applies to 0.9.7 only
+ +) Prelminary ENGINE config module.
+ [Steve Henson]
+
*) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
variable as an indication that a ClientHello message has been
void *CONF_module_get_usr_data(CONF_MODULE *pmod);
void CONF_module_set_usr_data(CONF_MODULE *pmod, void *usr_data);
+char *CONF_get1_default_config_file(void);
+
/* BEGIN ERROR CODES */
/* The following lines are auto generated by the script mkerr.pl. Any changes
* made after this point may be overwritten when the script is next run.
#include <openssl/dso.h>
#include <openssl/x509.h>
#include <openssl/asn1.h>
+#include <openssl/engine.h>
void OPENSSL_load_builtin_modules(void)
{
/* Add builtin modules here */
ASN1_add_oid_module();
+ ENGINE_add_conf_module();
}
/* This is the automatic configuration loader: it is called automatically by
static int openssl_configured = 0;
-#if 0 /* Disabled because of obvious buffer overflow.
- * This is not yet actually used anywhere -- but it shouldn't
- * unless it is fixed first. */
void OPENSSL_config(void)
{
- char *file, config_name[256];
+ int ret;
+ char *file;
if (openssl_configured)
return;
OPENSSL_load_builtin_modules();
- file = getenv("OPENSSL_CONF");
+ file = CONF_get1_default_config_file();
if (!file)
- {
- strcpy(config_name,X509_get_default_cert_area());
-#ifndef OPENSSL_SYS_VMS
- strcat(config_name,"/");
-#endif
- strcat(config_name,OPENSSL_CONF);
- file=config_name;
- }
+ return;
- if(CONF_modules_load_file(file, "openssl_config", 0) <= 0)
+ ret = CONF_modules_load_file(file, "openssl_config", 0);
+ OPENSSL_free(file);
+ if (ret <= 0)
{
BIO *bio_err;
-
ERR_load_crypto_strings();
if ((bio_err=BIO_new(BIO_s_file())) != NULL)
{
return;
}
-#endif
void OPENSSL_no_config()
{
pmod->usr_data = usr_data;
}
+/* Return default config file name */
+
+char *CONF_get1_default_config_file(void)
+ {
+ char *file;
+ int len;
+
+ file = getenv("OPENSSL_CONF");
+ if (file)
+ return BUF_strdup(file);
+
+ len = strlen(X509_get_default_cert_area());
+#ifndef OPENSSL_SYS_VMS
+ len++;
+#endif
+ len += strlen(OPENSSL_CONF);
+
+ file = OPENSSL_malloc(len + 1);
+
+ if (!file)
+ return NULL;
+ strcpy(file,X509_get_default_cert_area());
+#ifndef OPENSSL_SYS_VMS
+ strcat(file,"/");
+#endif
+ strcat(file,OPENSSL_CONF);
+
+ return file;
+ }
LIBSRC= eng_err.c eng_lib.c eng_list.c eng_init.c eng_ctrl.c \
eng_table.c eng_pkey.c eng_fat.c eng_all.c \
tb_rsa.c tb_dsa.c tb_dh.c tb_rand.c tb_cipher.c tb_digest.c \
- eng_openssl.c eng_dyn.c \
+ eng_openssl.c eng_dyn.c eng_cnf.c \
hw_atalla.c hw_cswift.c hw_ncipher.c hw_nuron.c hw_ubsec.c \
hw_openbsd_dev_crypto.c
LIBOBJ= eng_err.o eng_lib.o eng_list.o eng_init.o eng_ctrl.o \
eng_table.o eng_pkey.o eng_fat.o eng_all.o \
tb_rsa.o tb_dsa.o tb_dh.o tb_rand.o tb_cipher.o tb_digest.o \
- eng_openssl.o eng_dyn.o \
+ eng_openssl.o eng_dyn.o eng_cnf.o \
hw_atalla.o hw_cswift.o hw_ncipher.o hw_nuron.o hw_ubsec.o \
hw_openbsd_dev_crypto.o
--- /dev/null
+/* eng_cnf.c */
+/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
+ * project 2001.
+ */
+/* ====================================================================
+ * Copyright (c) 2001 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com). This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <stdio.h>
+#include <openssl/crypto.h>
+#include "cryptlib.h"
+#include <openssl/conf.h>
+#include <openssl/engine.h>
+
+/* #define ENGINE_CONF_DEBUG */
+
+/* ENGINE config module */
+
+static char *skip_dot(char *name)
+ {
+ char *p;
+ p = strchr(name, '.');
+ if (p)
+ return p + 1;
+ return name;
+ }
+
+int int_engine_configure(char *name, char *value, const CONF *cnf)
+ {
+ int i;
+ int ret = 0;
+ STACK_OF(CONF_VALUE) *ecmds;
+ CONF_VALUE *ecmd;
+ char *ctrlname, *ctrlvalue;
+ ENGINE *e = NULL;
+ name = skip_dot(name);
+#ifdef ENGINE_CONF_DEBUG
+ fprintf(stderr, "Configuring engine %s\n", name);
+#endif
+ /* Value is a section containing ENGINE commands */
+ ecmds = NCONF_get_section(cnf, value);
+
+ if (!ecmds)
+ {
+ ENGINEerr(ENGINE_F_INT_ENGINE_CONFIGURE, ENGINE_R_ENGINE_SECTION_ERROR);
+ return 0;
+ }
+
+ for (i = 0; i < sk_CONF_VALUE_num(ecmds); i++)
+ {
+ ecmd = sk_CONF_VALUE_value(ecmds, i);
+ ctrlname = skip_dot(ecmd->name);
+ ctrlvalue = ecmd->value;
+#ifdef ENGINE_CONF_DEBUG
+ fprintf(stderr, "ENGINE conf: doing ctrl(%s,%s)\n", ctrlname, ctrlvalue);
+#endif
+
+ /* First handle some special pseudo ctrls */
+
+ /* Override engine name to use */
+ if (!strcmp(ctrlname, "engine_id"))
+ name = ctrlvalue;
+ /* Load a dynamic ENGINE */
+ else if (!strcmp(ctrlname, "dynamic_path"))
+ {
+ e = ENGINE_by_id("dynamic");
+ if (!e)
+ goto err;
+ if (!ENGINE_ctrl_cmd_string(e, "SO_PATH", ctrlvalue, 0))
+ goto err;
+ if (!ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0))
+ goto err;
+ }
+ /* ... add other pseudos here ... */
+ else
+ {
+ /* At this point we need an ENGINE structural reference
+ * if we don't already have one.
+ */
+ if (!e)
+ {
+ e = ENGINE_by_id(name);
+ if (!e)
+ return 0;
+ }
+ /* Allow "EMPTY" to mean no value: this allows a valid
+ * "value" to be passed to ctrls of type NO_INPUT
+ */
+ if (!strcmp(ctrlvalue, "EMPTY"))
+ ctrlvalue = NULL;
+ if (!ENGINE_ctrl_cmd_string(e,
+ ctrlname, ctrlvalue, 0))
+ return 0;
+ }
+
+
+ }
+ ret = 1;
+ err:
+ if (e)
+ ENGINE_free(e);
+ return ret;
+ }
+
+
+static int int_engine_module_init(CONF_IMODULE *md, const CONF *cnf)
+ {
+ STACK_OF(CONF_VALUE) *elist;
+ CONF_VALUE *cval;
+ int i;
+#ifdef ENGINE_CONF_DEBUG
+ fprintf(stderr, "Called engine module: name %s, value %s\n",
+ CONF_imodule_get_name(md), CONF_imodule_get_value(md));
+#endif
+ /* Value is a section containing ENGINEs to configure */
+ elist = NCONF_get_section(cnf, CONF_imodule_get_value(md));
+
+ if (!elist)
+ {
+ ENGINEerr(ENGINE_F_ENGINE_MODULE_INIT, ENGINE_R_ENGINES_SECTION_ERROR);
+ return 0;
+ }
+
+ for (i = 0; i < sk_CONF_VALUE_num(elist); i++)
+ {
+ cval = sk_CONF_VALUE_value(elist, i);
+ if (!int_engine_configure(cval->name, cval->value, cnf))
+ return 0;
+ }
+
+ return 1;
+ }
+
+void ENGINE_add_conf_module(void)
+ {
+ CONF_module_add("engines", int_engine_module_init, 0);
+ }
{ERR_PACK(0,ENGINE_F_ENGINE_LIST_REMOVE,0), "ENGINE_LIST_REMOVE"},
{ERR_PACK(0,ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,0), "ENGINE_load_private_key"},
{ERR_PACK(0,ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,0), "ENGINE_load_public_key"},
+{ERR_PACK(0,ENGINE_F_ENGINE_MODULE_INIT,0), "ENGINE_MODULE_INIT"},
{ERR_PACK(0,ENGINE_F_ENGINE_NEW,0), "ENGINE_new"},
{ERR_PACK(0,ENGINE_F_ENGINE_REMOVE,0), "ENGINE_remove"},
{ERR_PACK(0,ENGINE_F_ENGINE_SET_DEFAULT_TYPE,0), "ENGINE_SET_DEFAULT_TYPE"},
{ERR_PACK(0,ENGINE_F_ENGINE_TABLE_REGISTER,0), "ENGINE_TABLE_REGISTER"},
{ERR_PACK(0,ENGINE_F_ENGINE_UNLOAD_KEY,0), "ENGINE_UNLOAD_KEY"},
{ERR_PACK(0,ENGINE_F_INT_CTRL_HELPER,0), "INT_CTRL_HELPER"},
+{ERR_PACK(0,ENGINE_F_INT_ENGINE_CONFIGURE,0), "INT_ENGINE_CONFIGURE"},
{ERR_PACK(0,ENGINE_F_LOG_MESSAGE,0), "LOG_MESSAGE"},
{ERR_PACK(0,ENGINE_F_SET_DATA_CTX,0), "SET_DATA_CTX"},
{0,NULL}
{ENGINE_R_DSO_FAILURE ,"DSO failure"},
{ENGINE_R_DSO_FUNCTION_NOT_FOUND ,"dso function not found"},
{ENGINE_R_DSO_NOT_FOUND ,"dso not found"},
+{ENGINE_R_ENGINES_SECTION_ERROR ,"engines section error"},
{ENGINE_R_ENGINE_IS_NOT_IN_LIST ,"engine is not in the list"},
+{ENGINE_R_ENGINE_SECTION_ERROR ,"engine section error"},
{ENGINE_R_FAILED_LOADING_PRIVATE_KEY ,"failed loading private key"},
{ENGINE_R_FAILED_LOADING_PUBLIC_KEY ,"failed loading public key"},
{ENGINE_R_FINISH_FAILED ,"finish failed"},
}
CRYPTO_r_unlock(CRYPTO_LOCK_ENGINE);
if(iterator == NULL)
+ {
ENGINEerr(ENGINE_F_ENGINE_BY_ID,
ENGINE_R_NO_SUCH_ENGINE);
+ ERR_add_error_data(2, "id=", id);
+ }
return iterator;
}
* selective functions. */
int ENGINE_set_default(ENGINE *e, unsigned int flags);
+void ENGINE_add_conf_module(void);
+
/* Deprecated functions ... */
/* int ENGINE_clear_defaults(void); */
* made after this point may be overwritten when the script is next run.
*/
void ERR_load_ENGINE_strings(void);
-
/* Error codes for the ENGINE functions. */
/* Function codes. */
#define ENGINE_F_ENGINE_LIST_REMOVE 121
#define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY 150
#define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY 151
+#define ENGINE_F_ENGINE_MODULE_INIT 187
#define ENGINE_F_ENGINE_NEW 122
#define ENGINE_F_ENGINE_REMOVE 123
#define ENGINE_F_ENGINE_SET_DEFAULT_TYPE 126
#define ENGINE_F_ENGINE_TABLE_REGISTER 184
#define ENGINE_F_ENGINE_UNLOAD_KEY 152
#define ENGINE_F_INT_CTRL_HELPER 172
+#define ENGINE_F_INT_ENGINE_CONFIGURE 188
#define ENGINE_F_LOG_MESSAGE 141
#define ENGINE_F_SET_DATA_CTX 183
#define ENGINE_R_DSO_FAILURE 104
#define ENGINE_R_DSO_FUNCTION_NOT_FOUND 131
#define ENGINE_R_DSO_NOT_FOUND 132
+#define ENGINE_R_ENGINES_SECTION_ERROR 148
#define ENGINE_R_ENGINE_IS_NOT_IN_LIST 105
+#define ENGINE_R_ENGINE_SECTION_ERROR 149
#define ENGINE_R_FAILED_LOADING_PRIVATE_KEY 128
#define ENGINE_R_FAILED_LOADING_PUBLIC_KEY 129
#define ENGINE_R_FINISH_FAILED 106
projects / oweals / openssl.git / commitdiff