The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:
OpenWrt: lan = label_mac -2, wan = label_mac -2
stock: lan = label_mac, wan = label_mac +1
The full address assignment is as follows:
LAN label
WAN label + 1
5G label
2G label - 1
This patch changes all devices using TL-WDR4300 board:
TL-WDR3600 v1 (checked on device)
TL-WDR4300 v1 (checked on device)
TL-WDR4300 v1 (IL)
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rephrase/extend commit title/message, backport]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit
a4260eaab7744c8e3f1f7a62a61aab5e3b562342)
base_mac=$(mtd_get_mac_binary info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
+ tplink,tl-wdr3600-v1|\
+ tplink,tl-wdr4300-v1|\
+ tplink,tl-wdr4300-v1-il)
+ base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
+ wan_mac=$(macaddr_add "$base_mac" 1)
+ ;;
tplink,tl-wr941-v2|\
tplink,tl-wr941n-v7-cn)
base_mac=$(mtd_get_mac_binary u-boot 130048)
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-2)>;
phy-mode = "rgmii";
phy-handle = <&phy0>;