Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
Six eth interface is chosen because the platform I am using combines
UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Ethernet address:
CONFIG_ETHADDR
+ CONFIG_ETH1ADDR
CONFIG_ETH2ADDR
CONFIG_ETH3ADDR
+ CONFIG_ETH4ADDR
+ CONFIG_ETH5ADDR
Define a default value for Ethernet address to use
for the respective Ethernet interface, in case this
}
#endif
+#if defined(CONFIG_HAS_ETH4)
+ puts ("\neth4addr =");
+ for (i=0; i<6; ++i) {
+ printf ("%c%02X", i ? ':' : ' ', bd->bi_enet4addr[i]);
+ }
+#endif
+
+#if defined(CONFIG_HAS_ETH5)
+ puts ("\neth5addr =");
+ for (i=0; i<6; ++i) {
+ printf ("%c%02X", i ? ':' : ' ', bd->bi_enet5addr[i]);
+ }
+#endif
+
#ifdef CONFIG_HERMES
print_str ("ethspeed", strmhz(buf, bd->bi_ethspeed));
#endif
#ifdef CONFIG_ETH3ADDR
"eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0"
#endif
+#ifdef CONFIG_ETH4ADDR
+ "eth4addr=" MK_STR(CONFIG_ETH4ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH5ADDR
+ "eth5addr=" MK_STR(CONFIG_ETH5ADDR) "\0"
+#endif
#ifdef CONFIG_IPADDR
"ipaddr=" MK_STR(CONFIG_IPADDR) "\0"
#endif
#ifdef CONFIG_ETH3ADDR
"eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0"
#endif
+#ifdef CONFIG_ETH4ADDR
+ "eth4addr=" MK_STR(CONFIG_ETH4ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH5ADDR
+ "eth5addr=" MK_STR(CONFIG_ETH5ADDR) "\0"
+#endif
#ifdef CONFIG_ETHPRIME
"ethprime=" CONFIG_ETHPRIME "\0"
#endif
fdt_fixup_crypto_node(blob, 0x0204);
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
+ defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
#endif
.enet_interface = CFG_UEC4_INTERFACE_MODE,
};
#endif
+#ifdef CONFIG_UEC_ETH5
+static uec_info_t eth5_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC5_UCC_NUM,
+ .rx_clock = CFG_UEC5_RX_CLK,
+ .tx_clock = CFG_UEC5_TX_CLK,
+ .eth_type = CFG_UEC5_ETH_TYPE,
+ },
+#if (CFG_UEC5_ETH_TYPE == FAST_ETH)
+ .num_threads_tx = UEC_NUM_OF_THREADS_1,
+ .num_threads_rx = UEC_NUM_OF_THREADS_1,
+#else
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+#endif
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC5_PHY_ADDR,
+ .enet_interface = CFG_UEC5_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH6
+static uec_info_t eth6_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC6_UCC_NUM,
+ .rx_clock = CFG_UEC6_RX_CLK,
+ .tx_clock = CFG_UEC6_TX_CLK,
+ .eth_type = CFG_UEC6_ETH_TYPE,
+ },
+#if (CFG_UEC6_ETH_TYPE == FAST_ETH)
+ .num_threads_tx = UEC_NUM_OF_THREADS_1,
+ .num_threads_rx = UEC_NUM_OF_THREADS_1,
+#else
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+#endif
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC6_PHY_ADDR,
+ .enet_interface = CFG_UEC6_INTERFACE_MODE,
+};
+#endif
-#define MAXCONTROLLERS (4)
+#define MAXCONTROLLERS (6)
static struct eth_device *devlist[MAXCONTROLLERS];
#ifdef CONFIG_HAS_ETH3
unsigned char bi_enet3addr[6];
#endif
+#ifdef CONFIG_HAS_ETH4
+ unsigned char bi_enet4addr[6];
+#endif
+#ifdef CONFIG_HAS_ETH5
+ unsigned char bi_enet5addr[6];
+#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
}
#endif
+#ifdef CONFIG_HAS_ETH4
+ /* handle 5th ethernet address */
+ s = getenv("eth4addr");
+#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
+ if (s == NULL)
+ board_get_enetaddr(bd->bi_enet4addr);
+ else
+#endif
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet4addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+
+#ifdef CONFIG_HAS_ETH5
+ /* handle 6th ethernet address */
+ s = getenv("eth5addr");
+#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
+ if (s == NULL)
+ board_get_enetaddr(bd->bi_enet5addr);
+ else
+#endif
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet5addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+
#if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
defined(CONFIG_TQM8272) || \
defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
#if defined(CONFIG_UEC_ETH4)
uec_initialize(3);
#endif
+#if defined(CONFIG_UEC_ETH5)
+ uec_initialize(4);
+#endif
+#if defined(CONFIG_UEC_ETH6)
+ uec_initialize(5);
+#endif
#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
#ifdef CONFIG_ETH3ADDR
"eth3addr=" MK_STR (CONFIG_ETH3ADDR) "\0"
#endif
+#ifdef CONFIG_ETH4ADDR
+ "eth4addr=" MK_STR (CONFIG_ETH4ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH5ADDR
+ "eth5addr=" MK_STR (CONFIG_ETH5ADDR) "\0"
+#endif
#ifdef CONFIG_ETHPRIME
"ethprime=" CONFIG_ETHPRIME "\0"
#endif