mvebu: add missing patch for reprobing SFP phys for 4.14
authorJonas Gorski <jonas.gorski@gmail.com>
Sun, 25 Feb 2018 21:54:39 +0000 (22:54 +0100)
committerJonas Gorski <jonas.gorski@gmail.com>
Sun, 25 Feb 2018 21:58:40 +0000 (22:58 +0100)
Add the patch for reprobing phys also for 4.14, as it is still needed.

Fixes: 4ccad922293a ("mvebu: Add support for kernel 4.14")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch [new file with mode: 0644]

diff --git a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch
new file mode 100644 (file)
index 0000000..a9a6634
--- /dev/null
@@ -0,0 +1,98 @@
+From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 29 Sep 2016 11:44:39 +0200
+Subject: [PATCH] sfp: retry phy probe if unsuccessful
+
+Some phys seem to take longer than 50 ms to come out of reset, so retry
+until we find a phy.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
+ 1 file changed, 25 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -488,7 +488,7 @@ static void sfp_sm_phy_detach(struct sfp
+       sfp->mod_phy = NULL;
+ }
+-static void sfp_sm_probe_phy(struct sfp *sfp)
++static int sfp_sm_probe_phy(struct sfp *sfp)
+ {
+       struct phy_device *phy;
+       int err;
+@@ -497,12 +497,12 @@ static void sfp_sm_probe_phy(struct sfp
+       phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
+       if (IS_ERR(phy)) {
++              if (PTR_ERR(phy) == -ENODEV) {
++                      dev_dbg(sfp->dev, "no PHY detected\n");
++                      return -EAGAIN;
++              }
+               dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+-              return;
+-      }
+-      if (!phy) {
+-              dev_info(sfp->dev, "no PHY detected\n");
+-              return;
++              return PTR_ERR(phy);
+       }
+       err = sfp_add_phy(sfp->sfp_bus, phy);
+@@ -510,11 +510,13 @@ static void sfp_sm_probe_phy(struct sfp
+               phy_device_remove(phy);
+               phy_device_free(phy);
+               dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
+-              return;
++              return err;
+       }
+       sfp->mod_phy = phy;
+       phy_start(phy);
++
++      return 0;
+ }
+ static void sfp_sm_link_up(struct sfp *sfp)
+@@ -560,14 +562,9 @@ static void sfp_sm_fault(struct sfp *sfp
+ static void sfp_sm_mod_init(struct sfp *sfp)
+ {
+-      sfp_module_tx_enable(sfp);
++      int ret = 0;
+-      /* Wait t_init before indicating that the link is up, provided the
+-       * current state indicates no TX_FAULT.  If TX_FAULT clears before
+-       * this time, that's fine too.
+-       */
+-      sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
+-      sfp->sm_retries = 5;
++      sfp_module_tx_enable(sfp);
+       /* Setting the serdes link mode is guesswork: there's no
+        * field in the EEPROM which indicates what mode should
+@@ -581,7 +578,22 @@ static void sfp_sm_mod_init(struct sfp *
+       if (sfp->id.base.e1000_base_t ||
+           sfp->id.base.e100_base_lx ||
+           sfp->id.base.e100_base_fx)
+-              sfp_sm_probe_phy(sfp);
++              ret = sfp_sm_probe_phy(sfp);
++
++      if (!ret) {
++              /* Wait t_init before indicating that the link is up, provided
++               * the current state indicates no TX_FAULT.  If TX_FAULT clears
++               * this time, that's fine too.
++               */
++              sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
++              sfp->sm_retries = 5;
++              return;
++      }
++
++      if (ret == -EAGAIN)
++              sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++      else
++              sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
+ }
+ static int sfp_sm_mod_probe(struct sfp *sfp)