ARM: imx8m: Don't use the addr parameter of reset_cpu()

imx8m has the only implementation of reset_cpu() which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e84b ("imx8m: restrict reset_cpu")
Co-developed-by: Harald Seiler <hws@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index f0a0e1bbf8321a781ba29a12c32ccacd24f71e94..89229da3b62ac131a651711164a3178b40f11e11 100644 (file)
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -412,10 +412,7 @@ int ft_system_setup(void *blob, bd_t *bd)
 #if !CONFIG_IS_ENABLED(SYSRESET)
 void reset_cpu(ulong addr)
 {
-       struct watchdog_regs *wdog = (struct watchdog_regs *)addr;
-
-       if (!addr)
-               wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+       struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
 
        /* Clear WDA to trigger WDOG_B immediately */
        writew((SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS), &wdog->wcr);