*/
u32 get_device_type(void)
{
- struct omap_sys_ctrl_regs *ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- return (readl(&ctrl->control_status) &
+ return (readl((*ctrl)->control_status) &
(DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
}
(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
struct vcores_data const **omap_vcores =
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+ (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL;
/*
* The M & N values in the following tables are created using the
printf("\n INVALID OMAP REVISION ");
}
+ *ctrl = &omap4_ctrl;
}
void do_io_settings(void)
{
u32 lpddr2io;
- struct control_lpddr2io_regs *lpddr2io_regs =
- (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
u32 omap4_rev = omap_revision();
lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
/* EMIF1 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io1_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+ (*ctrl)->control_lpddr2io1_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
/* EMIF2 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io2_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+ (*ctrl)->control_lpddr2io2_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
/*
* Some of these settings (TRIM values) come from eFuse and are
* calibration of the device. Do the software over-ride only if
* the device is not correctly trimmed
*/
- if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+ if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_iva_voltage_ctrl);
+ (*ctrl)->control_ldosram_iva_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_mpu_voltage_ctrl);
+ (*ctrl)->control_ldosram_mpu_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_core_voltage_ctrl);
+ (*ctrl)->control_ldosram_core_voltage_ctrl);
}
/*
* i. unconditionally for all 4430
* ii. only if un-trimmed for 4460
*/
- if (!readl(&ctrl->control_efuse_1))
- writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+ if (!readl((*ctrl)->control_efuse_1))
+ writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
- if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2))
- writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+ if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
+ writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
}
#endif /* CONFIG_SPL_BUILD */
.prm_vc_cfg_i2c_mode = 0x4a307ba8,
.prm_vc_cfg_i2c_clk = 0x4a307bac,
};
+
+struct omap_sys_ctrl_regs const omap4_ctrl = {
+ .control_id_code = 0x4A002204,
+ .control_std_fuse_opp_bgap = 0x4a002260,
+ .control_status = 0x4a0022c4,
+ .control_ldosram_iva_voltage_ctrl = 0x4A002320,
+ .control_ldosram_mpu_voltage_ctrl = 0x4A002324,
+ .control_ldosram_core_voltage_ctrl = 0x4A002328,
+ .control_pbiaslite = 0x4A100600,
+ .control_lpddr2io1_0 = 0x4A100638,
+ .control_lpddr2io1_1 = 0x4A10063C,
+ .control_lpddr2io1_2 = 0x4A100640,
+ .control_lpddr2io1_3 = 0x4A100644,
+ .control_lpddr2io2_0 = 0x4A100648,
+ .control_lpddr2io2_1 = 0x4A10064C,
+ .control_lpddr2io2_2 = 0x4A100650,
+ .control_lpddr2io2_3 = 0x4A100654,
+ .control_efuse_1 = 0x4A100700,
+ .control_efuse_2 = 0x4A100704,
+};
(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
struct vcores_data const **omap_vcores =
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+ (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
{125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
default:
printf("\n INVALID OMAP REVISION ");
}
+
+ *ctrl = &omap5_ctrl;
}
/* LPDDR2 specific IO settings */
static void io_settings_lpddr2(void)
{
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_0));
+ (*ctrl)->control_ddrch1_0);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_1));
+ (*ctrl)->control_ddrch1_1);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_0));
+ (*ctrl)->control_ddrch2_0);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_1));
+ (*ctrl)->control_ddrch2_1);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_0));
+ (*ctrl)->control_lpddr2ch1_0);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_1));
+ (*ctrl)->control_lpddr2ch1_1);
writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
- &(ioregs_base->control_ddrio_0));
+ (*ctrl)->control_ddrio_0);
writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
- &(ioregs_base->control_ddrio_1));
+ (*ctrl)->control_ddrio_1);
writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
- &(ioregs_base->control_ddrio_2));
+ (*ctrl)->control_ddrio_2);
}
/* DDR3 specific IO settings */
static void io_settings_ddr3(void)
{
u32 io_settings = 0;
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddr3ch1_0));
+ (*ctrl)->control_ddr3ch1_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch1_0));
+ (*ctrl)->control_ddrch1_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch1_1));
+ (*ctrl)->control_ddrch1_1);
writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddr3ch2_0));
+ (*ctrl)->control_ddr3ch2_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch2_0));
+ (*ctrl)->control_ddrch2_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch2_1));
+ (*ctrl)->control_ddrch2_1);
writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_0));
+ (*ctrl)->control_ddrio_0);
writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_1));
+ (*ctrl)->control_ddrio_1);
writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_2));
+ (*ctrl)->control_ddrio_2);
/* omap5432 does not use lpddr2 */
- writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
- writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+ writel(0x0, (*ctrl)->control_lpddr2ch1_0);
+ writel(0x0, (*ctrl)->control_lpddr2ch1_1);
writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
- &(ioregs_base->control_emif1_sdram_config_ext));
+ (*ctrl)->control_emif1_sdram_config_ext);
writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
- &(ioregs_base->control_emif2_sdram_config_ext));
+ (*ctrl)->control_emif2_sdram_config_ext);
/* Disable DLL select */
- io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+ io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
& 0xFFEFFFFF);
writel(io_settings,
- &(ioregs_base->control_port_emif1_sdram_config));
+ (*ctrl)->control_port_emif1_sdram_config);
- io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+ io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
& 0xFFEFFFFF);
writel(io_settings,
- &(ioregs_base->control_port_emif2_sdram_config));
+ (*ctrl)->control_port_emif2_sdram_config);
}
/*
void do_io_settings(void)
{
u32 io_settings = 0, mask = 0;
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
/* Impedance settings EMMC, C2C 1,2, hsi2 */
mask = (ds_mask << 2) | (ds_mask << 8) |
(ds_mask << 16) | (ds_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
(~mask);
io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
(ds_45_ohm << 18) | (ds_60_ohm << 2);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_0));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
/* Impedance settings Mcspi2 */
mask = (ds_mask << 30);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
(~mask);
io_settings |= (ds_60_ohm << 30);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
/* Impedance settings C2C 3,4 */
mask = (ds_mask << 14) | (ds_mask << 16);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
(~mask);
io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_2));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
/* Slew rate settings EMMC, C2C 1,2 */
mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
(~mask);
io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_0));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
/* Slew rate settings hsi2, Mcspi2 */
mask = (sc_mask << 24) | (sc_mask << 28);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
(~mask);
io_settings |= (sc_fast << 28) | (sc_fast << 24);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
/* Slew rate settings C2C 3,4 */
mask = (sc_mask << 16) | (sc_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
(~mask);
io_settings |= (sc_na << 16) | (sc_na << 18);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_2));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
/* impedance and slew rate settings for usb */
mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
- io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
(~mask);
io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
(ds_60_ohm << 23) | (sc_fast << 20) |
(sc_fast << 17) | (sc_fast << 14);
- writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
io_settings_lpddr2();
io_settings_ddr3();
/* Efuse settings */
- writel(EFUSE_1, &(ioregs_base->control_efuse_1));
- writel(EFUSE_2, &(ioregs_base->control_efuse_2));
- writel(EFUSE_3, &(ioregs_base->control_efuse_3));
- writel(EFUSE_4, &(ioregs_base->control_efuse_4));
+ writel(EFUSE_1, (*ctrl)->control_efuse_1);
+ writel(EFUSE_2, (*ctrl)->control_efuse_2);
+ writel(EFUSE_3, (*ctrl)->control_efuse_3);
+ writel(EFUSE_4, (*ctrl)->control_efuse_4);
}
#endif
void config_data_eye_leveling_samples(u32 emif_base)
{
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
if (emif_base == EMIF1_BASE)
writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- &(ioregs_base->control_emif1_sdram_config_ext));
+ (*ctrl)->control_emif1_sdram_config_ext);
else if (emif_base == EMIF2_BASE)
writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- &(ioregs_base->control_emif2_sdram_config_ext));
+ (*ctrl)->control_emif2_sdram_config_ext);
}
void init_omap_revision(void)
.prm_sldo_mm_setup = 0x4ae07bd4,
.prm_sldo_mm_ctrl = 0x4ae07bd8,
};
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+ .control_status = 0x4A002134,
+ .control_paconf_global = 0x4A002DA0,
+ .control_paconf_mode = 0x4A002DA4,
+ .control_smart1io_padconf_0 = 0x4A002DA8,
+ .control_smart1io_padconf_1 = 0x4A002DAC,
+ .control_smart1io_padconf_2 = 0x4A002DB0,
+ .control_smart2io_padconf_0 = 0x4A002DB4,
+ .control_smart2io_padconf_1 = 0x4A002DB8,
+ .control_smart2io_padconf_2 = 0x4A002DBC,
+ .control_smart3io_padconf_0 = 0x4A002DC0,
+ .control_smart3io_padconf_1 = 0x4A002DC4,
+ .control_pbias = 0x4A002E00,
+ .control_i2c_0 = 0x4A002E04,
+ .control_camera_rx = 0x4A002E08,
+ .control_hdmi_tx_phy = 0x4A002E0C,
+ .control_uniportm = 0x4A002E10,
+ .control_dsiphy = 0x4A002E14,
+ .control_mcbsplp = 0x4A002E18,
+ .control_usb2phycore = 0x4A002E1C,
+ .control_hdmi_1 = 0x4A002E20,
+ .control_hsi = 0x4A002E24,
+ .control_ddr3ch1_0 = 0x4A002E30,
+ .control_ddr3ch2_0 = 0x4A002E34,
+ .control_ddrch1_0 = 0x4A002E38,
+ .control_ddrch1_1 = 0x4A002E3C,
+ .control_ddrch2_0 = 0x4A002E40,
+ .control_ddrch2_1 = 0x4A002E44,
+ .control_lpddr2ch1_0 = 0x4A002E48,
+ .control_lpddr2ch1_1 = 0x4A002E4C,
+ .control_ddrio_0 = 0x4A002E50,
+ .control_ddrio_1 = 0x4A002E54,
+ .control_ddrio_2 = 0x4A002E58,
+ .control_hyst_1 = 0x4A002E5C,
+ .control_usbb_hsic_control = 0x4A002E60,
+ .control_c2c = 0x4A002E64,
+ .control_core_control_spare_rw = 0x4A002E68,
+ .control_core_control_spare_r = 0x4A002E6C,
+ .control_core_control_spare_r_c0 = 0x4A002E70,
+ .control_srcomp_north_side = 0x4A002E74,
+ .control_srcomp_south_side = 0x4A002E78,
+ .control_srcomp_east_side = 0x4A002E7C,
+ .control_srcomp_west_side = 0x4A002E80,
+ .control_srcomp_code_latch = 0x4A002E84,
+ .control_port_emif1_sdram_config = 0x4AE0C110,
+ .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
+ .control_port_emif2_sdram_config = 0x4AE0C118,
+ .control_emif1_sdram_config_ext = 0x4AE0C144,
+ .control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_smart1nopmio_padconf_0 = 0x4AE0CDA0,
+ .control_smart1nopmio_padconf_1 = 0x4AE0CDA4,
+ .control_padconf_mode = 0x4AE0CDA8,
+ .control_xtal_oscillator = 0x4AE0CDAC,
+ .control_i2c_2 = 0x4AE0CDB0,
+ .control_ckobuffer = 0x4AE0CDB4,
+ .control_wkup_control_spare_rw = 0x4AE0CDB8,
+ .control_wkup_control_spare_r = 0x4AE0CDBC,
+ .control_wkup_control_spare_r_c0 = 0x4AE0CDC0,
+ .control_srcomp_east_side_wkup = 0x4AE0CDC4,
+ .control_efuse_1 = 0x4AE0CDC8,
+ .control_efuse_2 = 0x4AE0CDCC,
+ .control_efuse_3 = 0x4AE0CDD0,
+ .control_efuse_4 = 0x4AE0CDD4,
+ .control_efuse_5 = 0x4AE0CDD8,
+ .control_efuse_6 = 0x4AE0CDDC,
+ .control_efuse_7 = 0x4AE0CDE0,
+ .control_efuse_8 = 0x4AE0CDE4,
+ .control_efuse_9 = 0x4AE0CDE8,
+ .control_efuse_10 = 0x4AE0CDEC,
+ .control_efuse_11 = 0x4AE0CDF0,
+ .control_efuse_12 = 0x4AE0CDF4,
+ .control_efuse_13 = 0x4AE0CDF8,
+};
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
#define DEVICE_GP 0x3
-struct omap_sys_ctrl_regs {
- unsigned int pad1[129];
- unsigned int control_id_code; /* 0x4A002204 */
- unsigned int pad11[22];
- unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */
- unsigned int pad2[24]; /* 0x4a002264 */
- unsigned int control_status; /* 0x4a0022c4 */
- unsigned int pad3[22]; /* 0x4a0022c8 */
- unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
- unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
- unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
- unsigned int pad4[260277];
- unsigned int control_pbiaslite; /* 0x4A100600 */
- unsigned int pad5[63];
- unsigned int control_efuse_1; /* 0x4A100700 */
- unsigned int control_efuse_2; /* 0x4A100704 */
-};
-
-struct control_lpddr2io_regs {
- unsigned int control_lpddr2io1_0;
- unsigned int control_lpddr2io1_1;
- unsigned int control_lpddr2io1_2;
- unsigned int control_lpddr2io1_3;
- unsigned int control_lpddr2io2_0;
- unsigned int control_lpddr2io2_1;
- unsigned int control_lpddr2io2_2;
- unsigned int control_lpddr2io2_3;
-};
#endif /* __ASSEMBLY__ */
/*
#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
-#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
/* ROM code defines */
/* Boot device */
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
#define DEVICE_GP 0x3
-struct omap_sys_ctrl_regs {
- u32 pad0[77]; /* 0x4A002000 */
- u32 control_status; /* 0x4A002134 */
- u32 pad1[794]; /* 0x4A002138 */
- u32 control_paconf_global; /* 0x4A002DA0 */
- u32 control_paconf_mode; /* 0x4A002DA4 */
- u32 control_smart1io_padconf_0; /* 0x4A002DA8 */
- u32 control_smart1io_padconf_1; /* 0x4A002DAC */
- u32 control_smart1io_padconf_2; /* 0x4A002DB0 */
- u32 control_smart2io_padconf_0; /* 0x4A002DB4 */
- u32 control_smart2io_padconf_1; /* 0x4A002DB8 */
- u32 control_smart2io_padconf_2; /* 0x4A002DBC */
- u32 control_smart3io_padconf_0; /* 0x4A002DC0 */
- u32 control_smart3io_padconf_1; /* 0x4A002DC4 */
- u32 pad2[14];
- u32 control_pbias; /* 0x4A002E00 */
- u32 control_i2c_0; /* 0x4A002E04 */
- u32 control_camera_rx; /* 0x4A002E08 */
- u32 control_hdmi_tx_phy; /* 0x4A002E0C */
- u32 control_uniportm; /* 0x4A002E10 */
- u32 control_dsiphy; /* 0x4A002E14 */
- u32 control_mcbsplp; /* 0x4A002E18 */
- u32 control_usb2phycore; /* 0x4A002E1C */
- u32 control_hdmi_1; /*0x4A002E20*/
- u32 control_hsi; /*0x4A002E24*/
- u32 pad3[2];
- u32 control_ddr3ch1_0; /*0x4A002E30*/
- u32 control_ddr3ch2_0; /*0x4A002E34*/
- u32 control_ddrch1_0; /*0x4A002E38*/
- u32 control_ddrch1_1; /*0x4A002E3C*/
- u32 control_ddrch2_0; /*0x4A002E40*/
- u32 control_ddrch2_1; /*0x4A002E44*/
- u32 control_lpddr2ch1_0; /*0x4A002E48*/
- u32 control_lpddr2ch1_1; /*0x4A002E4C*/
- u32 control_ddrio_0; /*0x4A002E50*/
- u32 control_ddrio_1; /*0x4A002E54*/
- u32 control_ddrio_2; /*0x4A002E58*/
- u32 control_hyst_1; /*0x4A002E5C*/
- u32 control_usbb_hsic_control; /*0x4A002E60*/
- u32 control_c2c; /*0x4A002E64*/
- u32 control_core_control_spare_rw; /*0x4A002E68*/
- u32 control_core_control_spare_r; /*0x4A002E6C*/
- u32 control_core_control_spare_r_c0; /*0x4A002E70*/
- u32 control_srcomp_north_side; /*0x4A002E74*/
- u32 control_srcomp_south_side; /*0x4A002E78*/
- u32 control_srcomp_east_side; /*0x4A002E7C*/
- u32 control_srcomp_west_side; /*0x4A002E80*/
- u32 control_srcomp_code_latch; /*0x4A002E84*/
- u32 pad4[3679394];
- u32 control_port_emif1_sdram_config; /*0x4AE0C110*/
- u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/
- u32 control_port_emif2_sdram_config; /*0x4AE0C118*/
- u32 pad5[10];
- u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */
- u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */
- u32 pad6[789];
- u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */
- u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */
- u32 control_padconf_mode; /* 0x4AE0CDA8 */
- u32 control_xtal_oscillator; /* 0x4AE0CDAC */
- u32 control_i2c_2; /* 0x4AE0CDB0 */
- u32 control_ckobuffer; /* 0x4AE0CDB4 */
- u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */
- u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */
- u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */
- u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */
- u32 control_efuse_1; /* 0x4AE0CDC8 */
- u32 control_efuse_2; /* 0x4AE0CDCC */
- u32 control_efuse_3; /* 0x4AE0CDD0 */
- u32 control_efuse_4; /* 0x4AE0CDD4 */
- u32 control_efuse_5; /* 0x4AE0CDD8 */
- u32 control_efuse_6; /* 0x4AE0CDDC */
- u32 control_efuse_7; /* 0x4AE0CDE0 */
- u32 control_efuse_8; /* 0x4AE0CDE4 */
- u32 control_efuse_9; /* 0x4AE0CDE8 */
- u32 control_efuse_10; /* 0x4AE0CDEC */
- u32 control_efuse_11; /* 0x4AE0CDF0 */
- u32 control_efuse_12; /* 0x4AE0CDF4 */
- u32 control_efuse_13; /* 0x4AE0CDF8 */
-};
-
/* Output impedance control */
#define ds_120_ohm 0x0
#define ds_60_ohm 0x1
#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
-#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
/* Silicon revisions */
#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
u32 prm_vc_cfg_channel;
};
+struct omap_sys_ctrl_regs {
+ u32 control_status;
+ u32 control_id_code;
+ u32 control_std_fuse_opp_bgap;
+ u32 control_ldosram_iva_voltage_ctrl;
+ u32 control_ldosram_mpu_voltage_ctrl;
+ u32 control_ldosram_core_voltage_ctrl;
+ u32 control_paconf_global;
+ u32 control_paconf_mode;
+ u32 control_smart1io_padconf_0;
+ u32 control_smart1io_padconf_1;
+ u32 control_smart1io_padconf_2;
+ u32 control_smart2io_padconf_0;
+ u32 control_smart2io_padconf_1;
+ u32 control_smart2io_padconf_2;
+ u32 control_smart3io_padconf_0;
+ u32 control_smart3io_padconf_1;
+ u32 control_pbias;
+ u32 control_i2c_0;
+ u32 control_camera_rx;
+ u32 control_hdmi_tx_phy;
+ u32 control_uniportm;
+ u32 control_dsiphy;
+ u32 control_mcbsplp;
+ u32 control_usb2phycore;
+ u32 control_hdmi_1;
+ u32 control_hsi;
+ u32 control_ddr3ch1_0;
+ u32 control_ddr3ch2_0;
+ u32 control_ddrch1_0;
+ u32 control_ddrch1_1;
+ u32 control_ddrch2_0;
+ u32 control_ddrch2_1;
+ u32 control_lpddr2ch1_0;
+ u32 control_lpddr2ch1_1;
+ u32 control_ddrio_0;
+ u32 control_ddrio_1;
+ u32 control_ddrio_2;
+ u32 control_lpddr2io1_0;
+ u32 control_lpddr2io1_1;
+ u32 control_lpddr2io1_2;
+ u32 control_lpddr2io1_3;
+ u32 control_lpddr2io2_0;
+ u32 control_lpddr2io2_1;
+ u32 control_lpddr2io2_2;
+ u32 control_lpddr2io2_3;
+ u32 control_hyst_1;
+ u32 control_usbb_hsic_control;
+ u32 control_c2c;
+ u32 control_core_control_spare_rw;
+ u32 control_core_control_spare_r;
+ u32 control_core_control_spare_r_c0;
+ u32 control_srcomp_north_side;
+ u32 control_srcomp_south_side;
+ u32 control_srcomp_east_side;
+ u32 control_srcomp_west_side;
+ u32 control_srcomp_code_latch;
+ u32 control_pbiaslite;
+ u32 control_port_emif1_sdram_config;
+ u32 control_port_emif1_lpddr2_nvm_config;
+ u32 control_port_emif2_sdram_config;
+ u32 control_emif1_sdram_config_ext;
+ u32 control_emif2_sdram_config_ext;
+ u32 control_smart1nopmio_padconf_0;
+ u32 control_smart1nopmio_padconf_1;
+ u32 control_padconf_mode;
+ u32 control_xtal_oscillator;
+ u32 control_i2c_2;
+ u32 control_ckobuffer;
+ u32 control_wkup_control_spare_rw;
+ u32 control_wkup_control_spare_r;
+ u32 control_wkup_control_spare_r_c0;
+ u32 control_srcomp_east_side_wkup;
+ u32 control_efuse_1;
+ u32 control_efuse_2;
+ u32 control_efuse_3;
+ u32 control_efuse_4;
+ u32 control_efuse_5;
+ u32 control_efuse_6;
+ u32 control_efuse_7;
+ u32 control_efuse_8;
+ u32 control_efuse_9;
+ u32 control_efuse_10;
+ u32 control_efuse_11;
+ u32 control_efuse_12;
+ u32 control_efuse_13;
+};
+
struct dpll_params {
u32 m;
u32 n;
extern struct dplls const **dplls_data;
extern struct vcores_data const **omap_vcores;
extern const u32 sys_clk_array[8];
+extern struct omap_sys_ctrl_regs const **ctrl;
+extern struct omap_sys_ctrl_regs const omap4_ctrl;
+extern struct omap_sys_ctrl_regs const omap5_ctrl;
void hw_data_init(void);
static void omap4_vmmc_pbias_config(struct mmc *mmc)
{
u32 value = 0;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- value = readl(&ctrl->control_pbiaslite);
+ value = readl((*ctrl)->control_pbiaslite);
value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
- writel(value, &ctrl->control_pbiaslite);
+ writel(value, (*ctrl)->control_pbiaslite);
/* set VMMC to 3V */
twl6030_power_mmc_init();
- value = readl(&ctrl->control_pbiaslite);
+ value = readl((*ctrl)->control_pbiaslite);
value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
- writel(value, &ctrl->control_pbiaslite);
+ writel(value, (*ctrl)->control_pbiaslite);
}
#endif
static void omap5_pbias_config(struct mmc *mmc)
{
u32 value = 0;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
- value = readl(&ctrl->control_pbias);
+ value = readl((*ctrl)->control_pbias);
value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, &ctrl->control_pbias);
+ writel(value, (*ctrl)->control_pbias);
twl6035_mmc1_poweron_ldo();
- value = readl(&ctrl->control_pbias);
+ value = readl((*ctrl)->control_pbias);
value &= ~SDCARD_BIAS_HIZ_MODE;
value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
- writel(value, &ctrl->control_pbias);
+ writel(value, (*ctrl)->control_pbias);
- value = readl(&ctrl->control_pbias);
+ value = readl((*ctrl)->control_pbias);
if (value & (1 << 23)) {
value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, &ctrl->control_pbias);
+ writel(value, (*ctrl)->control_pbias);
}
}
#endif
projects / oweals / u-boot.git / commitdiff