dm: freescale: serial: Drop serial_imx serial driver

This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index fa583045eb0a370f1ed1e7aebb87ba7c9b1030a9..8448449c88da12e3f181bba6fd5be578433fb869 100644 (file)
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
 obj-$(CONFIG_MCFUART) += mcfuart.o
 obj-$(CONFIG_SYS_NS16550) += ns16550.o
 obj-$(CONFIG_S5P) += serial_s5p.o
-obj-$(CONFIG_IMX_SERIAL) += serial_imx.o
 obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 obj-$(CONFIG_MXC_UART) += serial_mxc.o
 obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o

diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c
deleted file mode 100644 (file)
index d43a5fe..0000000
--- a/drivers/serial/serial_imx.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#if defined CONFIG_IMX_SERIAL1
-#define UART_BASE IMX_UART1_BASE
-#elif defined CONFIG_IMX_SERIAL2
-#define UART_BASE IMX_UART2_BASE
-#else
-#error "define CONFIG_IMX_SERIAL1, CONFIG_IMX_SERIAL2 or CONFIG_IMX_SERIAL_NONE"
-#endif
-
-struct imx_serial {
-       volatile uint32_t urxd[16];
-       volatile uint32_t utxd[16];
-       volatile uint32_t ucr1;
-       volatile uint32_t ucr2;
-       volatile uint32_t ucr3;
-       volatile uint32_t ucr4;
-       volatile uint32_t ufcr;
-       volatile uint32_t usr1;
-       volatile uint32_t usr2;
-       volatile uint32_t uesc;
-       volatile uint32_t utim;
-       volatile uint32_t ubir;
-       volatile uint32_t ubmr;
-       volatile uint32_t ubrc;
-       volatile uint32_t bipr[4];
-       volatile uint32_t bmpr[4];
-       volatile uint32_t uts;
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void imx_serial_setbrg(void)
-{
-       serial_init();
-}
-
-extern void imx_gpio_mode(int gpio_mode);
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int imx_serial_init(void)
-{
-       volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
-       unsigned int ufcr_rfdiv;
-       unsigned int refclk;
-
-#ifdef CONFIG_IMX_SERIAL1
-       imx_gpio_mode(PC11_PF_UART1_TXD);
-       imx_gpio_mode(PC12_PF_UART1_RXD);
-#else
-       imx_gpio_mode(PB30_PF_UART2_TXD);
-       imx_gpio_mode(PB31_PF_UART2_RXD);
-#endif
-
-       /* Disable UART */
-       base->ucr1 &= ~UCR1_UARTEN;
-
-       /* Set to default POR state */
-
-       base->ucr1 = 0x00000004;
-       base->ucr2 = 0x00000000;
-       base->ucr3 = 0x00000000;
-       base->ucr4 = 0x00008040;
-       base->uesc = 0x0000002B;
-       base->utim = 0x00000000;
-       base->ubir = 0x00000000;
-       base->ubmr = 0x00000000;
-       base->uts  = 0x00000000;
-       /* Set clocks */
-       base->ucr4 |= UCR4_REF16;
-
-       /* Configure FIFOs */
-       base->ufcr = 0xa81;
-
-       /* set the baud rate.
-        *
-        * baud * 16   x
-        * --------- = -
-        *  refclk     y
-        *
-        * x - 1 = UBIR
-        * y - 1 = UBMR
-        *
-        * each register is 16 bits wide. refclk max is 96 MHz
-        *
-        */
-
-       ufcr_rfdiv = ((base->ufcr) & UFCR_RFDIV) >> 7;
-       if (ufcr_rfdiv == 6)
-               ufcr_rfdiv = 7;
-       else
-               ufcr_rfdiv = 6 - ufcr_rfdiv;
-
-       refclk = get_PERCLK1();
-       refclk /= ufcr_rfdiv;
-
-       /* Set the numerator value minus one of the BRM ratio */
-       base->ubir = (gd->baudrate / 100) - 1;
-
-       /* Set the denominator value minus one of the BRM ratio */
-       base->ubmr = (refclk/(16 * 100)) - 1;
-
-       /* Set to 8N1 */
-       base->ucr2 &= ~UCR2_PREN;
-       base->ucr2 |= UCR2_WS;
-       base->ucr2 &= ~UCR2_STPB;
-
-       /* Ignore RTS */
-       base->ucr2 |= UCR2_IRTS;
-
-       /* Enable UART */
-       base->ucr1 |= UCR1_UARTEN | UCR1_UARTCLKEN;
-
-       /* Enable FIFOs */
-       base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
-
-       /* Clear status flags */
-       base->usr2 |= USR2_ADET  |
-                     USR2_DTRF  |
-                     USR2_IDLE  |
-                     USR2_IRINT |
-                     USR2_WAKE  |
-                     USR2_RTSF  |
-                     USR2_BRCD  |
-                     USR2_ORE;
-
-       /* Clear status flags */
-       base->usr1 |= USR1_PARITYERR |
-                     USR1_RTSD      |
-                     USR1_ESCF      |
-                     USR1_FRAMERR   |
-                     USR1_AIRINT    |
-                     USR1_AWAKE;
-       return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is successful, the character read is
- * written into its argument c.
- */
-static int imx_serial_getc(void)
-{
-       volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
-       unsigned char ch;
-
-       while(base->uts & UTS_RXEMPTY);
-
-       ch = (char)base->urxd[0];
-
-       return ch;
-}
-
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
-}
-#endif
-
-/*
- * Output a single byte to the serial port.
- */
-static void imx_serial_putc(const char c)
-{
-       volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
-
-       /* Wait for Tx FIFO not full */
-       while (base->uts & UTS_TXFULL);
-
-       base->utxd[0] = c;
-
-       /* If \n, also do \r */
-       if (c == '\n')
-               serial_putc ('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int imx_serial_tstc(void)
-{
-       volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
-
-       /* If receive fifo is empty, return false */
-       if (base->uts & UTS_RXEMPTY)
-               return 0;
-       return 1;
-}
-
-static struct serial_device imx_serial_drv = {
-       .name   = "imx_serial",
-       .start  = imx_serial_init,
-       .stop   = NULL,
-       .setbrg = imx_serial_setbrg,
-       .putc   = imx_serial_putc,
-       .puts   = default_serial_puts,
-       .getc   = imx_serial_getc,
-       .tstc   = imx_serial_tstc,
-};
-
-void imx_serial_initialize(void)
-{
-       serial_register(&imx_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-       return &imx_serial_drv;
-}