KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-4.14 = .198
+LINUX_VERSION-4.14 = .199
-LINUX_KERNEL_HASH-4.14.198 = 0322d619bff0a30e8e498b27f40f84e7437fe9edeb97132a6a9ded62188e8ca2
+LINUX_KERNEL_HASH-4.14.199 = 1239a99547acadc6bc045a7d82394847aac35f58e81141bd54b447b57596842a
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci)
+@@ -253,6 +253,37 @@ int ehci_reset(struct ehci_hcd *ehci)
command |= CMD_RESET;
dbg_cmd (ehci, "reset", command);
ehci_writel(ehci, command, &ehci->regs->command);
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
-@@ -1990,7 +1990,8 @@ static const struct usb_device_id option
+@@ -1996,7 +1996,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1159,6 +1159,10 @@ config SYNC_R4K
+@@ -1160,6 +1160,10 @@ config SYNC_R4K
config MIPS_MACHINE
def_bool n
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -652,7 +652,7 @@ static int ehci_run (struct usb_hcd *hcd
"USB %x.%x started, EHCI %x.%02x%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
temp >> 8, temp & 0xff,
&ehci->regs->intr_enable); /* Turn On Interrupts */
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
-@@ -646,7 +646,7 @@ ehci_hub_status_data (struct usb_hcd *hc
+@@ -645,7 +645,7 @@ ehci_hub_status_data (struct usb_hcd *hc
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/
mask = PORT_CSC | PORT_PEC | PORT_OCC;
else
mask = PORT_CSC | PORT_PEC;
-@@ -1016,7 +1016,7 @@ int ehci_hub_control(
+@@ -1015,7 +1015,7 @@ int ehci_hub_control(
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
---
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1068,9 +1068,6 @@ config FW_ARC
+@@ -1069,9 +1069,6 @@ config FW_ARC
config ARCH_MAY_HAVE_PC_FDC
bool
config CEVT_BCM1480
bool
-@@ -2968,6 +2965,18 @@ choice
+@@ -2969,6 +2966,18 @@ choice
bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2892,6 +2892,20 @@ config MIPS_O32_FP64_SUPPORT
+@@ -2893,6 +2893,20 @@ config MIPS_O32_FP64_SUPPORT
If unsure, say N.
select HAVE_PCSPKR_PLATFORM
select IRQ_MIPS_CPU
select I8253
-@@ -1129,6 +1131,9 @@ config DMA_NONCOHERENT
+@@ -1130,6 +1132,9 @@ config DMA_NONCOHERENT
bool
select NEED_DMA_MAP_STATE
config NEED_DMA_MAP_STATE
bool
-@@ -1653,6 +1658,7 @@ config CPU_R10000
+@@ -1654,6 +1659,7 @@ config CPU_R10000
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
MIPS Technologies R10000-series processors.
-@@ -1901,9 +1907,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
+@@ -1902,9 +1908,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
bool
config SYS_HAS_CPU_MIPS32_R5
bool
config SYS_HAS_CPU_MIPS64_R1
-@@ -1913,6 +1921,7 @@ config SYS_HAS_CPU_MIPS64_R2
+@@ -1914,6 +1922,7 @@ config SYS_HAS_CPU_MIPS64_R2
bool
config SYS_HAS_CPU_MIPS64_R6