doc: driver-model: Convert serial-howto.txt to reST

Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/doc/driver-model/index.rst b/doc/driver-model/index.rst
index c6353dcf663ecd493d05dcb27715b415be22fb10..82f4393099f546439b8d30554b143644b46954e7 100644 (file)
--- a/doc/driver-model/index.rst
+++ b/doc/driver-model/index.rst
@@ -16,3 +16,4 @@ Driver Model
    pci-info
    pmic-framework
    remoteproc-framework
+   serial-howto

diff --git a/doc/driver-model/serial-howto.rst b/doc/driver-model/serial-howto.rst
new file mode 100644 (file)
index 0000000..1469131
--- /dev/null
+++ b/doc/driver-model/serial-howto.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+How to port a serial driver to driver model
+===========================================
+
+Almost all of the serial drivers have been converted as at January 2016. These
+ones remain:
+
+   * serial_bfin.c
+   * serial_pxa.c
+
+The deadline for this work was the end of January 2016. If no one steps
+forward to convert these, at some point there may come a patch to remove them!
+
+Here is a suggested approach for converting your serial driver over to driver
+model. Please feel free to update this file with your ideas and suggestions.
+
+- #ifdef out all your own serial driver code (#ifndef CONFIG_DM_SERIAL)
+- Define CONFIG_DM_SERIAL for your board, vendor or architecture
+- If the board does not already use driver model, you need CONFIG_DM also
+- Your board should then build, but will not boot since there will be no serial
+  driver
+- Add the U_BOOT_DRIVER piece at the end (e.g. copy serial_s5p.c for example)
+- Add a private struct for the driver data - avoid using static variables
+- Implement each of the driver methods, perhaps by calling your old methods
+- You may need to adjust the function parameters so that the old and new
+  implementations can share most of the existing code
+- If you convert all existing users of the driver, remove the pre-driver-model
+  code
+
+In terms of patches a conversion series typically has these patches:
+- clean up / prepare the driver for conversion
+- add driver model code
+- convert at least one existing board to use driver model serial
+- (if no boards remain that don't use driver model) remove the old code
+
+This may be a good time to move your board to use device tree also. Mostly
+this involves these steps:
+
+- define CONFIG_OF_CONTROL and CONFIG_OF_SEPARATE
+- add your device tree files to arch/<arch>/dts
+- update the Makefile there
+- Add stdout-path to your /chosen device tree node if it is not already there
+- build and get u-boot-dtb.bin so you can test it
+- Your drivers can now use device tree
+- For device tree in SPL, define CONFIG_SPL_OF_CONTROL

diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt
deleted file mode 100644 (file)
index a0df9a7..0000000
--- a/doc/driver-model/serial-howto.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-How to port a serial driver to driver model
-===========================================
-
-Almost all of the serial drivers have been converted as at January 2016. These
-ones remain:
-
-   serial_bfin.c
-   serial_pxa.c
-
-The deadline for this work was the end of January 2016. If no one steps
-forward to convert these, at some point there may come a patch to remove them!
-
-Here is a suggested approach for converting your serial driver over to driver
-model. Please feel free to update this file with your ideas and suggestions.
-
-- #ifdef out all your own serial driver code (#ifndef CONFIG_DM_SERIAL)
-- Define CONFIG_DM_SERIAL for your board, vendor or architecture
-- If the board does not already use driver model, you need CONFIG_DM also
-- Your board should then build, but will not boot since there will be no serial
-    driver
-- Add the U_BOOT_DRIVER piece at the end (e.g. copy serial_s5p.c for example)
-- Add a private struct for the driver data - avoid using static variables
-- Implement each of the driver methods, perhaps by calling your old methods
-- You may need to adjust the function parameters so that the old and new
-    implementations can share most of the existing code
-- If you convert all existing users of the driver, remove the pre-driver-model
-    code
-
-In terms of patches a conversion series typically has these patches:
-- clean up / prepare the driver for conversion
-- add driver model code
-- convert at least one existing board to use driver model serial
-- (if no boards remain that don't use driver model) remove the old code
-
-This may be a good time to move your board to use device tree also. Mostly
-this involves these steps:
-
-- define CONFIG_OF_CONTROL and CONFIG_OF_SEPARATE
-- add your device tree files to arch/<arch>/dts
-- update the Makefile there
-- Add stdout-path to your /chosen device tree node if it is not already there
-- build and get u-boot-dtb.bin so you can test it
-- Your drivers can now use device tree
-- For device tree in SPL, define CONFIG_SPL_OF_CONTROL