-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx6ull.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
/ {
- model = "Freescale i.MX6 ULL 14x14 EVK Board";
+ model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
-
- chosen {
- stdout-path = &uart1;
- };
-
- memory {
- reg = <0x80000000 0x20000000>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- status = "okay";
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_can_3v3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "can-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
- };
-
- reg_sd1_vmmc: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_gpio_dvfs: regulator-gpio {
- compatible = "regulator-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dvfs>;
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "gpio_dvfs";
- regulator-type = "voltage";
- gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
- states = <1300000 0x1 1400000 0x0>;
- };
- };
-
- spi5 {
- compatible = "spi-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi4>;
- status = "okay";
- gpio-sck = <&gpio5 11 0>;
- gpio-mosi = <&gpio5 10 0>;
- cs-gpios = <&gpio5 7 0>;
- num-chipselects = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio_spi: gpio_spi@0 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- oe-gpios = <&gpio5 8 0>;
- #gpio-cells = <2>;
- reg = <0>;
- registers-number = <1>;
- registers-default = /bits/ 8 <0x57>;
- spi-max-frequency = <100000>;
- };
- };
-};
-
-&cpu0 {
- arm-supply = <®_arm>;
- soc-supply = <®_soc>;
- dc-supply = <®_gpio_dvfs>;
};
&clks {
- assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
- assigned-clock-rates = <786432000>;
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-handle = <ðphy0>;
- status = "okay";
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rmii";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
- };
-};
-
-&gpc {
- fsl,cpu_pupscr_sw2iso = <0x1>;
- fsl,cpu_pupscr_sw = <0x0>;
- fsl,cpu_pdnscr_iso2sw = <0x1>;
- fsl,cpu_pdnscr_iso = <0x1>;
- fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- mag3110@0e {
- compatible = "fsl,mag3110";
- reg = <0x0e>;
- position = <2>;
- };
-
- fxls8471@1e {
- compatible = "fsl,fxls8471";
- reg = <0x1e>;
- position = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <0 8>;
- };
-};
-
-&i2c2 {
- clock_frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog_1>;
- imx6ul-evk {
- pinctrl_hog_1: hoggrp-1 {
- fsl,pins = <
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
- MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
- MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
- >;
- };
-
- pinctrl_csi1: csi1grp {
- fsl,pins = <
- MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
- MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
- MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
- MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
- MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
- MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
- MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
- MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
- MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
- MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
- MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
- MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
- >;
- };
-
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
- MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp{
- fsl,pins = <
- MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
- MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp{
- fsl,pins = <
- MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
- MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
- MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
- MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
- MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
- MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
- MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
- MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
- >;
- };
-
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
- >;
- };
-
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
- >;
- };
-
- pinctrl_qspi: qspigrp {
- fsl,pins = <
- MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
- MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
- MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
- MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
- MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
- MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
- MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
- MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
- >;
- };
-
- pinctrl_uart2dte: uart2dtegrp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1
- MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x1b0b1
- MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x1b0b1
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
- >;
- };
- };
-};
-
-&iomuxc_snvs {
- pinctrl-names = "default_snvs";
- pinctrl-0 = <&pinctrl_hog_2>;
- imx6ul-evk {
- pinctrl_hog_2: hoggrp-2 {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000
- >;
- };
-
- pinctrl_dvfs: dvfsgrp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79
- >;
- };
-
- pinctrl_lcdif_reset: lcdifresetgrp {
- fsl,pins = <
- /* used for lcd reset */
- MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
- >;
- };
-
- pinctrl_spi4: spi4grp {
- fsl,pins = <
- MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
- MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
- MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
- MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
- >;
- };
-
- pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
- >;
- };
- };
-};
-
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat
- &pinctrl_lcdif_ctrl
- &pinctrl_lcdif_reset>;
- display = <&display0>;
- status = "okay";
-
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <8>;
- hback-porch = <4>;
- hsync-len = <41>;
- vback-porch = <2>;
- vfront-porch = <4>;
- vsync-len = <10>;
-
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
-&qspi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi>;
- status = "okay";
- ddrsmp=<0>;
-
- flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- /* compatible = "micron,n25q256a"; */
- compatible = "jedec,spi-nor";
- spi-max-frequency = <29000000>;
- spi-nor,ddr-quad-read-dummy = <6>;
- reg = <0>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
- /* for DTE mode, add below change */
- /* fsl,dte-mode; */
- /* pinctrl-0 = <&pinctrl_uart2dte>; */
- status = "okay";
-};
-
-&usbotg1 {
- dr_mode = "otg";
- srp-disable;
- hnp-disable;
- adp-disable;
- status = "okay";
-};
-
-&usbotg2 {
- dr_mode = "host";
- disable-over-current;
- status = "okay";
-};
-
-&usbphy1 {
- tx-d-cal = <0x5>;
-};
-
-&usbphy2 {
- tx-d-cal = <0x5>;
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- vmmc-supply = <®_sd1_vmmc>;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- no-1-8-v;
- non-removable;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,wdog_b;
+ assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+ assigned-clock-rates = <320000000>;
};
-/*
- * Copyright 2015-2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul.dtsi"
#include "imx6ull-pinfunc.h"
#include "imx6ull-pinfunc-snvs.h"
-#include "skeleton.dtsi"
-/ {
- aliases {
- can0 = &flexcan1;
- can1 = &flexcan2;
- ethernet0 = &fec1;
- ethernet1 = &fec2;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- i2c3 = &i2c4;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- serial6 = &uart7;
- serial7 = &uart8;
- spi0 = &qspi;
- spi1 = &ecspi1;
- spi2 = &ecspi2;
- spi3 = &ecspi3;
- spi4 = &ecspi4;
- usbphy0 = &usbphy1;
- usbphy1 = &usbphy2;
- usb0 = &usbotg1;
- usb1 = &usbotg2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- clock-latency = <61036>; /* two CLK32 periods */
- operating-points = <
- /* kHz uV */
- 528000 1175000
- 99000 950000
- >;
- fsl,soc-operating-points = <
- /* KHz uV */
- 528000 1175000
- 99000 1175000
- >;
- clocks = <&clks IMX6UL_CLK_ARM>,
- <&clks IMX6UL_CLK_PLL2_BUS>,
- <&clks IMX6UL_CLK_PLL2_PFD2>,
- <&clks IMX6UL_CA7_SECONDARY_SEL>,
- <&clks IMX6UL_CLK_STEP>,
- <&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1_SYS>,
- <&clks IMX6UL_PLL1_BYPASS>,
- <&clks IMX6UL_CLK_PLL1>,
- <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_CLK_OSC>;
- clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step",
- "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc";
- };
- };
-
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a02000 0x100>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
+
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 900000 1275000
+ 792000 1225000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 900000 1250000
+ 792000 1175000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
- osc: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
+&ocotp {
+ compatible = "fsl,imx6ull-ocotp", "syscon";
+};
- ipp_di0: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di0";
- };
+&usdhc1 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
- ipp_di1: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di1";
- };
- };
+&usdhc2 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+/ {
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gpc>;
- ranges;
-
- busfreq {
- compatible = "fsl,imx_busfreq";
- clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>,
- <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>,
- <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>,
- <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>,
- <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>,
- <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>,
- <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>,
- <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>,
- <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1>;
- clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
- "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
- "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
- "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
- fsl,max_ddr_freq = <400000000>;
- };
-
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ocrams: sram@00900000 {
- compatible = "fsl,lpm-sram";
- reg = <0x00900000 0x4000>;
- };
-
- ocrams_ddr: sram@00904000 {
- compatible = "fsl,ddr-lpm-sram";
- reg = <0x00904000 0x1000>;
- };
-
- ocram: sram@00905000 {
- compatible = "mmio-sram";
- reg = <0x00905000 0x1B000>;
- };
-
- dma_apbh: dma-apbh@01804000 {
- compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
- reg = <0x01804000 0x2000>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
- #dma-cells = <1>;
- dma-channels = <4>;
- clocks = <&clks IMX6UL_CLK_APBHDMA>;
- };
-
- gpmi: gpmi-nand@01806000{
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "bch";
- clocks = <&clks IMX6UL_CLK_GPMI_IO>,
- <&clks IMX6UL_CLK_GPMI_APB>,
- <&clks IMX6UL_CLK_GPMI_BCH>,
- <&clks IMX6UL_CLK_GPMI_BCH_APB>,
- <&clks IMX6UL_CLK_PER_BCH>;
- clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
- "gpmi_bch_apb", "per1_bch";
- dmas = <&dma_apbh 0>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- aips1: aips-bus@02000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x100000>;
- ranges;
-
- spba-bus@02000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x40000>;
- ranges;
-
- spdif: spdif@02004000 {
- compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif";
- reg = <0x02004000 0x4000>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 41 18 0>,
- <&sdma 42 18 0>;
- dma-names = "rx", "tx";
- clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>,
- <&clks IMX6UL_CLK_OSC>,
- <&clks IMX6UL_CLK_SPDIF>,
- <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7", "dma";
- status = "disabled";
- };
-
- ecspi1: ecspi@02008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02008000 0x4000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI1>,
- <&clks IMX6UL_CLK_ECSPI1>;
- clock-names = "ipg", "per";
- dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi2: ecspi@0200c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x0200c000 0x4000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI2>,
- <&clks IMX6UL_CLK_ECSPI2>;
- clock-names = "ipg", "per";
- dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi3: ecspi@02010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02010000 0x4000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI3>,
- <&clks IMX6UL_CLK_ECSPI3>;
- clock-names = "ipg", "per";
- dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi4: ecspi@02014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02014000 0x4000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI4>,
- <&clks IMX6UL_CLK_ECSPI4>;
- clock-names = "ipg", "per";
- dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart7: serial@02018000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02018000 0x4000>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART7_IPG>,
- <&clks IMX6UL_CLK_UART7_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart1: serial@02020000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART1_IPG>,
- <&clks IMX6UL_CLK_UART1_SERIAL>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- esai: esai@02024000 {
- compatible = "fsl,imx6ull-esai";
- reg = <0x02024000 0x4000>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ESAI_IPG>,
- <&clks IMX6UL_CLK_ESAI_MEM>,
- <&clks IMX6UL_CLK_ESAI_EXTAL>,
- <&clks IMX6UL_CLK_ESAI_IPG>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "core", "mem", "extal",
- "fsys", "dma";
- dmas = <&sdma 0 21 0>, <&sdma 47 21 0>;
- dma-names = "rx", "tx";
- dma-source = <&gpr 0 14 0 15>;
- status = "disabled";
- };
-
- sai1: sai@02028000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x02028000 0x4000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI1>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 35 24 0>, <&sdma 36 24 0>;
- status = "disabled";
- };
-
- sai2: sai@0202c000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x0202c000 0x4000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI2>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 37 24 0>, <&sdma 38 24 0>;
- status = "disabled";
- };
-
- sai3: sai@02030000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x02030000 0x4000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI3>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 39 24 0>, <&sdma 40 24 0>;
- status = "disabled";
- };
-
- asrc: asrc@02034000 {
- compatible = "fsl,imx53-asrc";
- reg = <0x02034000 0x4000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
- <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck_0",
- "asrck_1", "asrck_2", "asrck_3", "asrck_4",
- "asrck_5", "asrck_6", "asrck_7", "asrck_8",
- "asrck_9", "asrck_a", "asrck_b", "asrck_c",
- "asrck_d", "asrck_e", "asrck_f", "dma";
- dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
- <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
- dma-names = "rxa", "rxb", "rxc",
- "txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
- fsl,asrc-width = <16>;
- status = "okay";
- };
- };
-
- tsc: tsc@02040000 {
- compatible = "fsl,imx6ul-tsc";
- reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_ADC2>;
- clock-names = "tsc", "adc";
- status = "disabled";
- };
-
- pwm1: pwm@02080000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02080000 0x4000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_PWM1>,
- <&clks IMX6UL_CLK_PWM1>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm2: pwm@02084000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02084000 0x4000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm3: pwm@02088000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02088000 0x4000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_PWM3>,
- <&clks IMX6UL_CLK_PWM3>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm4: pwm@0208c000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x0208c000 0x4000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- flexcan1: can@02090000 {
- compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
- reg = <0x02090000 0x4000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
- <&clks IMX6UL_CLK_CAN1_SERIAL>;
- clock-names = "ipg", "per";
- stop-mode = <&gpr 0x10 1 0x10 17>;
- status = "disabled";
- };
-
- flexcan2: can@02094000 {
- compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
- reg = <0x02094000 0x4000>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
- <&clks IMX6UL_CLK_CAN2_SERIAL>;
- clock-names = "ipg", "per";
- stop-mode = <&gpr 0x10 2 0x10 18>;
- status = "disabled";
- };
-
- gpt1: gpt@02098000 {
- compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
- reg = <0x02098000 0x4000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
- <&clks IMX6UL_CLK_GPT1_SERIAL>;
- clock-names = "ipg", "per";
- };
-
- gpio1: gpio@0209c000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x0209c000 0x4000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@020a0000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a0000 0x4000>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@020a4000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a4000 0x4000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@020a8000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a8000 0x4000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020ac000 0x4000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- snvslp: snvs@020b0000 {
- compatible = "fsl,imx6ul-snvs";
- reg = <0x020b0000 0x4000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- fec2: ethernet@020b4000 {
- compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
- reg = <0x020b4000 0x4000>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ENET>,
- <&clks IMX6UL_CLK_ENET_AHB>,
- <&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- stop-mode = <&gpr 0x10 4>;
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
- fsl,magic-packet;
- fsl,wakeup_irq = <0>;
- status = "disabled";
- };
-
- kpp: kpp@020b8000 {
- compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
- reg = <0x020b8000 0x4000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>;
- status = "disabled";
- };
-
- wdog1: wdog@020bc000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x020bc000 0x4000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG1>;
- };
-
- wdog2: wdog@020c0000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x020c0000 0x4000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG2>;
- status = "disabled";
- };
-
- clks: ccm@020c4000 {
- compatible = "fsl,imx6ul-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
- clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
- };
-
- anatop: anatop@020c8000 {
- compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
- reg = <0x020c8000 0x1000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
- reg_3p0: regulator-3p0@120 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd3p0";
- regulator-min-microvolt = <2625000>;
- regulator-max-microvolt = <3400000>;
- anatop-reg-offset = <0x120>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2625000>;
- anatop-max-voltage = <3400000>;
- anatop-enable-bit = <0>;
- };
-
- reg_arm: regulator-vddcore@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <0>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <24>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- reg_soc: regulator-vddsoc@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddsoc";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <18>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <28>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
- };
-
- usbphy1: usbphy@020c9000 {
- compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBPHY1>;
- phy-3p0-supply = <®_3p0>;
- fsl,anatop = <&anatop>;
- };
-
- usbphy2: usbphy@020ca000 {
- compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
- reg = <0x020ca000 0x1000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBPHY2>;
- phy-3p0-supply = <®_3p0>;
- fsl,anatop = <&anatop>;
- };
-
- tempmon: tempmon {
- compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
- };
-
- snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
- reg = <0x020cc000 0x4000>;
-
- snvs_rtc: snvs-rtc-lp {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap = <&snvs>;
- offset = <0x34>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- mask = <0x61>;
- };
-
- snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
- regmap = <&snvs>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- linux,keycode = <KEY_POWER>;
- wakeup;
- };
- };
-
- epit1: epit@020d0000 {
- reg = <0x020d0000 0x4000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epit2: epit@020d4000 {
- reg = <0x020d4000 0x4000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- src: src@020d8000 {
- compatible = "fsl,imx6ul-src", "fsl,imx51-src";
- reg = <0x020d8000 0x4000>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- #reset-cells = <1>;
- };
-
- gpc: gpc@020dc000 {
- compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>;
- };
-
- iomuxc: iomuxc@020e0000 {
- compatible = "fsl,imx6ul-iomuxc";
- reg = <0x020e0000 0x4000>;
- };
-
- gpr: iomuxc-gpr@020e4000 {
- compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
- reg = <0x020e4000 0x4000>;
- };
-
- mqs: mqs {
- compatible = "fsl,imx6sx-mqs";
- gpr = <&gpr>;
- status = "disabled";
- };
-
- gpt2: gpt@020e8000 {
- compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
- reg = <0x020e8000 0x4000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- };
-
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma";
- reg = <0x020ec000 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SDMA>,
- <&clks IMX6UL_CLK_SDMA>;
- clock-names = "ipg", "ahb";
- #dma-cells = <3>;
- iram = <&ocram>;
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
- };
-
- pwm5: pwm@020f0000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f0000 0x4000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm6: pwm@020f4000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f4000 0x4000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm7: pwm@020f8000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f8000 0x4000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm8: pwm@020fc000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020fc000 0x4000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
- };
-
- aips2: aips-bus@02100000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02100000 0x100000>;
- ranges;
-
- usbotg1: usb@02184000 {
- compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBOH3>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,anatop = <&anatop>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
- };
-
- usbotg2: usb@02184200 {
- compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
- reg = <0x02184200 0x200>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBOH3>;
- fsl,usbphy = <&usbphy2>;
- fsl,usbmisc = <&usbmisc 1>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@02184800 {
- #index-cells = <1>;
- compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x02184800 0x200>;
- };
-
- fec1: ethernet@02188000 {
- compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
- reg = <0x02188000 0x4000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ENET>,
- <&clks IMX6UL_CLK_ENET_AHB>,
- <&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET_REF>,
- <&clks IMX6UL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- stop-mode = <&gpr 0x10 3>;
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
- fsl,magic-packet;
- fsl,wakeup_irq = <0>;
- status = "disabled";
- };
-
- usdhc1: usdhc@02190000 {
- compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
- reg = <0x02190000 0x4000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USDHC1>,
- <&clks IMX6UL_CLK_USDHC1>,
- <&clks IMX6UL_CLK_USDHC1>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- fsl,tuning-step= <2>;
- status = "disabled";
- };
-
- usdhc2: usdhc@02194000 {
- compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
- reg = <0x02194000 0x4000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USDHC2>,
- <&clks IMX6UL_CLK_USDHC2>,
- <&clks IMX6UL_CLK_USDHC2>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- fsl,tuning-step= <2>;
- status = "disabled";
- };
-
- adc1: adc@02198000 {
- compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
- reg = <0x02198000 0x4000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ADC1>;
- num-channels = <2>;
- clock-names = "adc";
- status = "disabled";
- };
-
- i2c1: i2c@021a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a0000 0x4000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C1>;
- status = "disabled";
- };
-
- i2c2: i2c@021a4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a4000 0x4000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C2>;
- status = "disabled";
- };
-
- i2c3: i2c@021a8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a8000 0x4000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C3>;
- status = "disabled";
- };
-
- romcp@021ac000 {
- compatible = "fsl,imx6ul-romcp", "syscon";
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc: mmdc@021b0000 {
- compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
- };
-
- weim: weim@021b8000 {
- compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
- reg = <0x021b8000 0x4000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>;
- };
-
- ocotp: ocotp-ctrl@021bc000 {
- compatible = "fsl,imx6ull-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- clocks = <&clks IMX6UL_CLK_OCOTP>;
- };
-
- csu: csu@021c0000 {
- compatible = "fsl,imx6ul-csu";
- reg = <0x021c0000 0x4000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- csi: csi@021c4000 {
- compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi";
- reg = <0x021c4000 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_CSI>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "disp-axi", "csi_mclk", "disp_dcic";
- status = "disabled";
- };
-
- lcdif: lcdif@021c8000 {
- compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
- reg = <0x021c8000 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
- <&clks IMX6UL_CLK_LCDIF_APB>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "pix", "axi", "disp_axi";
- status = "disabled";
- };
-
- pxp: pxp@021cc000 {
- compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
- reg = <0x021cc000 0x4000>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>;
- clock-names = "pxp_ipg", "pxp_axi";
- status = "disabled";
- };
-
- qspi: qspi@021e0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi";
- reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
- reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_QSPI>,
- <&clks IMX6UL_CLK_QSPI>;
- clock-names = "qspi_en", "qspi";
- status = "disabled";
- };
-
- wdog3: wdog@021e4000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x021e4000 0x4000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG3>;
- status = "disabled";
- };
-
- uart2: serial@021e8000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021e8000 0x4000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART2_IPG>,
- <&clks IMX6UL_CLK_UART2_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@021ec000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021ec000 0x4000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART3_IPG>,
- <&clks IMX6UL_CLK_UART3_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart4: serial@021f0000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f0000 0x4000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART4_IPG>,
- <&clks IMX6UL_CLK_UART4_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart5: serial@021f4000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f4000 0x4000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART5_IPG>,
- <&clks IMX6UL_CLK_UART5_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c4: i2c@021f8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021f8000 0x4000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C4>;
- status = "disabled";
- };
-
- uart6: serial@021fc000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021fc000 0x4000>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART6_IPG>,
- <&clks IMX6UL_CLK_UART6_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
- };
-
- aips3: aips-bus@02200000 {
+ aips3: aips-bus@2200000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02200000 0x100000>;
ranges;
- dcp: dcp@02280000 {
+ dcp: crypto@2280000 {
+ compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
reg = <0x02280000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- /*clocks = <&clks IMX6UL_CLK_DCP>;*/
+ clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
clock-names = "dcp";
- status = "disabled";
};
- rngb: rngb@02284000 {
- reg = <0x02284000 0x4000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ iomuxc_snvs: iomuxc-snvs@2290000 {
+ compatible = "fsl,imx6ull-iomuxc-snvs";
+ reg = <0x02290000 0x4000>;
};
- uart8: serial@02288000 {
+ uart8: serial@2288000 {
compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_UART8_IPG>,
<&clks IMX6UL_CLK_UART8_SERIAL>;
clock-names = "ipg", "per";
- dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
- dma-names = "rx", "tx";
status = "disabled";
};
-
- epdc: epdc@0228c000 {
- compatible = "fsl,imx7d-epdc";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0228c000 0x4000>;
- clocks = <&clks IMX6UL_CLK_EPDC_ACLK>,
- <&clks IMX6UL_CLK_EPDC_PIX>;
- clock-names = "epdc_axi", "epdc_pix";
- /* Need to fix epdc-ram */
- /* epdc-ram = <&gpr 0x4 30>; */
- status = "disabled";
- };
-
- iomuxc_snvs: iomuxc-snvs@02290000 {
- compatible = "fsl,imx6ull-iomuxc-snvs";
- reg = <0x02290000 0x10000>;
- };
-
- snvs_gpr: snvs-gpr@0x02294000 {
- compatible = "fsl, imx6ull-snvs-gpr";
- reg = <0x02294000 0x10000>;
- };
};
};
};
projects / oweals / u-boot.git / commitdiff